Needle-type glucose biosensor with an electrochemically codeposited enzyme in a platinum black matrix

In this study we report the development of a needle-type glucose biosensor for the management of hemorrhagic shock. The immobilization technique depends on the electrophoretic deposition of the glucose oxidase enzyme in an electrochemically grown platinum black matrix. The sensor was coated with Nafion to decrease the effect of interferents. Preliminary tests were carried out to evaluate the sensor performance in vitro. These tests included the measurement of glucose levels in buffer solutions containing various potential physiological interferents, as well as in bovine serum. The preliminary results show the sensor to have inearity up to 33 mM and a diminished response to interferents. The advantages of this technique are its simplicity and high controllability.     

Amperometric enzyme biosensor for hydrogen peroxide via Ugi multicomponent reaction

A novel strategy based on the Ugi multicomponent reaction was employed for immobilizing horseradish peroxidase on sodium alginate-coated gold electrode. The electrode was employed for constructing an amperometric biosensor device using 1 mM hydroquinone as electrochemical mediator. The electrode showed linear response (poised at −300 mV vs Ag/AgCl) toward H₂O₂ concentration between 70 μM and 8.8 mM at pH 7.0. The biosensor reached 95% of steady-state current in about 12 s and its sensitivity was 33.8 mA/M cm². The electrode retained full initial activity after 30 days of storage at 4 °C in 50 mM sodium phosphate buffer, pH 7.0.     

Rapid voltammetric determination of nitroaromatic explosives at electrochemically activated carbon-fibre electrodes

The electrochemical behaviour of some nitroaromatic explosives (2,4,6-trinitrotoluene, TNT; 2,6-dinitrotoluene, 2,6-DNT; 2-nitrotoluene, 2-NT; 2-amino-4,6-dinitrotoluene, 2-A-4,6-DNT; 3,5-dinitroaniline, 3,5-DNA; and nitrobenzene, NB) at electrochemically activated carbon-fibre microelectrodes is reported. Electrochemical activation of such electrode material by repeated square-wave (SW) voltammetric scans between 0.0 and +2.6 V versus Ag/AgCl, produced a dramatic increase in the cathodic response from these compounds. This is attributed to the increase of the carbon-fibre surface area, because of its fracture, and the appearance of deep fissures along the main fibre axis into which the nitroaromatic compounds penetrate. Based on the important contribution of adsorption and/or thin layer electrolysis to the total voltammetric response, a SW voltammetric method for rapid detection of nitroaromatic explosives was developed. No interference was found from compounds such as hydrazine, phenolic compounds, carbamates, triazines or surfactants. The limits of detection obtained are approximately 0.03 g mL^–1 for all the nitroaromatic compounds tested. The method was applied for the determination of TNT in water and soil spiked samples; recoveries were higher than 95% in all cases.     

Simple and rapid voltammetric determination of morphine at electrochemically pretreated glassy carbon electrodes

A simple and rapid method for morphine detection has been described based on electrochemical pretreatment of glassy carbon electrode (GCE) which was treated by anodic oxidation at 1.75 V, following potential cycling in the potential range from 0 V to 1.0 V vs. Ag|AgCl reference electrode. The sensitivity for morphine detection was improved greatly and the detection limit was 0.2 μM. The reproducibility of the voltammetric measurements was usually less than 3% RSD for six replicate measurements. Moreover, this method could readily discriminate morphine from codeine. And an electrochemical detection of morphine in spiked urine sample was succeeded with satisfactory results.     

Multivariate optimisation of electrochemically pre-treated electrodes used in a voltammetric electronic tongue

The use of experimental design as a tool to optimise electrochemically cleaned electrodes applied in a voltammetric electronic tongue is described. A simple and quick activation of electrode surfaces is essential for this type of device, especially for on-line applications in industrial processes. The electronic tongue consisted of four metal electrodes, e.g. Au, Ir, Pt, and Rh in a three-electrode configuration. Current was measured as a function of large potential pulses of decreasing amplitude applied to each electrode. Preliminary results showed that electrochemical cleaning activated the electrode surfaces to similar extent as polishing. Settings of potential and time for each electrode was determined with experimental design in a solution containing 1.0 mM K₄[Fe(CN)₆] in 0.1 M phosphate buffer (pH 6.8). Electrode surfaces were deactivated in-between measurements in a complex liquid, like tea. Optimal settings for potential and time in the electrochemical cleaning procedure at each electrode were chosen at recoveries of 100% (compared to polished electrodes). The recoveries were larger than 100% when too large potentials and times were applied. This could be explained by the fact that the electrode areas increased and therefore also the current responses. Principal component analysis (PCA) was used to investigate the stability of the electrode settings at 100% recoveries. No obvious trends of drift in the signals were found.     

Cyclic voltammetric measurements of growth of Aspergillus terreus.

A detailed study using the cyclic voltammogram was done on the live cells of Aspergillus terreus. The peak current values were obtained for different days of growth and plotted against time. The response of cyclic voltammogram showed the phases of the growth of the fungus. The growth curve obtained matched well with the conventional methodology, which assesses the increase of dry weight of the organisms against time. The electrochemical method is more advantageous because it is easy to assess and consumes less time. Further the electrochemical method clearly shows the decline phase which is generally not very defined in the conventional method of assessment of the growth curve. It was confirmed by further experiments that the metabolites were responsible for the anodic peak and not the biomass. Further work is in progress in order to analyze the metabolite(s) that is/are responsible for the anodic peak.     

Cyclic voltammetric responses of horseradish peroxidase multilayers on electrodes

The catalytic responses obtained with step-by-step neutravidin-biotin deposition of successive monolayers of HRP are analyzed by means of cyclic voltammetry. The theoretical tools that have been developed allowed full characterization of the multilayered HRP coatings by means of a combination between closed-form analysis of limiting behaviors and finite difference numerical computations. An analysis of the experiments in which the number of monolayers was extended to 16 allowed an approximate determination of the average thickness of each monolayer, pointing to a compact arrangement of neutravidin and biotinylated HRP. The piling up of so many monolayers on the electrode allowed an improvement of the catalytic current by a factor of ca. 10, leading to very good sensitivities in term of cosubstrate detection.     

Cyclic voltammetric study of redox-active surfactant by hydrogel-modified electrode

The dissolved states of redox-active non-ionic surfactant (FPEG) in the swollen state of N-isopropyl acrylamide (NIPA) hydrogel have been studied by using a gel-modified electrode. The pronounced decrease in the peak current and the negative shift in the formal potential of CV at the gel-modified electrode, as compared with the normal GC electrode, was observed in the micelle-solution; this indicates that the diffusive FPEG molecules which form the micelle hardly penetrate into the NIPA gel. This result suggests that there exists an interaction between FPEG molecules and the NIPA gel in the vicinity of the surface of the NIPA gel in the micelle-solution. However, this also indicates that a small amount of FPEG molecules which can form micelles exist in the NIPA gel.     

Differential pulse voltammetric simultaneous determination of noradrenalin and acetaminophen using a hematoxylin biosensor

A highly efficient noradrenalin (NA) biosensor was fabricated on the basis of hematoxylin electrodeposited on a glassy carbon electrode, GCE. The cyclic voltammetric responses of the hematoxylin biosensor at various scan rates, which were obtained in a 0.25 mmol L⁻¹ NA solution, showed the characteristic shape typical of an EC_cat process. The kinetic parameters such as electron transfer coefficient, α, the catalytic electron transfer rate constant, k′, and the standard catalytic electron transfer rate constant, k⁰, for oxidation of NA at the hematoxylin biosensor surface were estimated using cyclic and RDE voltammetry. The peaks of differential pulse voltammetric (DPV) for NA and acetaminophen (AC) oxidation at the hematoxylin biosensor surface were clearly separated from each other when they co-exited in the physiological pH (pH 7.0). It was, therefore, possible to simultaneously determine NA and AC in the samples at a hematoxylin biosensor. Linear calibration curves were obtained for 5.0 × 10⁻¹ to 65.40 μmol L⁻¹ and 65.40-274.20 μmol L⁻¹ of NA, and for 12.00-59.10 μmol L⁻¹ and 59.10-261.70 μmol L⁻¹ of AC. The sensitivities of the biosensor to NA in the absence and presence of AC were found virtually the same, which indicates the fact that the electrocatalytic oxidation processes of NA are independent of AC and, therefore, simultaneous or independent measurements of the two analytes (NA and AC) are possible without any interference. The results of 16 successive measurements show an average voltammetric peak current of 1.13 ± 0.03 μA for an electrolyte solution containing 5.00 μmol L⁻¹ NA. The hematoxylin biosensor has been satisfactorily used for the determination of NA and AC in pharmaceutical formulations. The results obtained, using the biosensor, are in very good agreement with those declared in the label of pharmaceutical inhalation products.     

Cyclic voltammetric studies of a thionine coated pyrolytic graphite electrode

Cyclic voltammetry has been used to study the spontaneous adsorption and oxidative coating of thionine onto basal plane pyrolytic graphite electodes. Spontaneous adsorption leads to a monolayer of flat lying molecules together with some weakly attached upper layers. Oxidation of an adsorbed thionine monolayer results in several products which appear to include polymeric species and the sulphoxide of thionine. Similar products are obtained by an oxidative coating procedure.     

Cyclic voltammetric studies of certain industrially potential iron chelate catalysts

 For the analysis of infrared spectroscopic bands and complex patterns partial cross correlation functions of a sample spectrum with reference spectra are calculated. The chosen ranges of the spectra are based on empirical knowledge of infrared spectrum structure correlations. The normalised maxima of the partial cross correlation functions are interpreted as fuzzy truth values and are combined by fuzzy logical operators. By application of that procedure larger common substructures will be derived from the reference spectra than by a maximum common substructure search based on the complete spectra. Received: 30 October 1996/Revised: 24 February 1997/Accepted: 26 February 1997     

Efficient oxidation of alcohols electrochemically mediated by azabicyclo-N-oxyls

Preparation of azabicyclo-N-oxyls and the electrochemical oxidation of alcohols using them as mediators have been exploited. This oxidation was applicable to a transformation of sterically hindered secondary alcohols into the corresponding ketones in high yields.     

Phenol biosensor based on electrochemically controlled integration of tyrosinase in a redox polymer

An amperometric biosensor for the detection of phenolic compounds was developed based on the immobilization of tyrosinase within an Os-complex functionalized electrodeposition polymer. Integration of tyrosinase within the redox polymer assures efficient catechol recycling between the enzyme and the polymer bound redox sites. The non-manual immobilization procedure improves the reproducibility of fabrication process, greatly reduces the desorption of the enzyme from the immobilization layer, and, most importantly prevents fast inactivation of the enzyme by its substrate due to fast redox cycling. A two-layer sensor architecture was developed involving ascorbic acid oxidase entrapped within an electrodeposition polymer in a second layer on top of the redox polymer/tyrosinase layer. Using this sensor architecture it was possible to eliminate the current interference arising from direct ascorbate oxidation up to a concentration of 630 μM ascorbic acid. The effects of the polymer thickness, the enzyme/polymer ratio, and the applied potential were evaluated with respect to optimal sensor properties. The sensitivity of the optimized sensors for catechol was 6.1 nA μM⁻¹ with a detection limit of 10 nM, and for phenol 0.15 nA μM⁻¹ with a detection limit of 100 nM.     

Cyanide reaction with ninhydrin: elucidation of reaction and interference mechanisms.

A new sensitive spectrophotometric method has recently been developed for the trace determination of cyanide with ninhydrin. Cyanide ion was supposed to act as a specific base catalyst. Nevertheless, this paper demonstrates that the reported assay is based on a novel reaction of cyanide with 2,2-dihydroxy-1,3-indanedione, which affords purple or blue colored salts of 2-cyano-1,2,3-trihydroxy-2H indene. Hydrindantin is merely an intermediary of the reaction. The formation of a stable and isolable ninhydrin-cyanide compound has been confirmed by its preparation in crystalline form. Also, it is thoroughly characterized by elemental as well as MS, IR, UV/VIS and 1H NMR analyses. The Ruhemann's sequence of reactions of cyanide with ninhydrin has been reconsidered and an adequate mechanism of the reaction is proposed. As a consequence, the interference of oxidizers as well as copper, silver and mercury ions with the cyanide determination has been elucidated.     

Cyclic voltammetric studies on nitrosubstituted N(thioacyl)piperidines and morpholines

Cyclic voltammograms in dimethylsulphoxide (DMSO) are presented and discussed for para- and meta-nitro-substituted N(thiobenzoyl)piperidines (1a, 2a) and morpholines (lb,2b) as well as for the corresponding N(thiocinnamoyl) derivatives (3b, 4a, b). In the first cycle, two main reduction waves (A, B) were found for compounds 1a, b, 3b, 4a, b, and only one (A) for 2a, b. In the second cycle, a new wave (D) appears at a potential less negative than A, indicating the formation of a new redox system.The electrochemial data were interpreted in terms of the following EECE mechanism;

The species P⁻ obtained during the reduction of 3b was unambiguously identified by means of ESR spectroscopy as the anion radical of p-nitrobenzaldehyde. For 1a, b it was assumed on similar grounds that P⁻ is the p-nitrobenzoate anion radical.The formation of these species is accounted for by the chemical reaction of the dianion with the residual water present in the solvent.