Infrared emission and theoretical study of carbon monoxide adsorbed on alumina-supported Rh, Ir, and Pt catalysts

The infrared emission spectra of CO adsorbed on alumina-supported 1, 3, and 5 wt % Rh, Ir, and Pt metal-containing catalysts were studied at 423 and 473 K. While CO is adsorbed in dicarbonyl (dimer), linearly (on-top) bonded and bridged carbonyl forms on rhodium and platinum, the dimer form is dominant on iridium. The relative intensity of Rh-CO and Ir-CO linear bands decrease with increasing temperature compared to the intensity of the dicarbonyl bands; the corresponding bands on Pt behave the opposite way. Two dicarbonyl and two linear Pt-CO bands were identified in the infrared spectra of Pt/Al(2)O(3) catalysts. The surface structure (kinked or planar Pt atoms), the dispersity of the metal, the temperature, and the quantity of adsorbed CO on the surfaces all have an effect on the fine structure of the Pt-CO stretching bands. The metal-carbon and CO stretching force constants were calculated for surface dicarbonyl, linearly bonded CO, and bridged carbonyl species. The metal-carbon stretching wavenumbers and force constants were predicted and compared between surface species and metal carbonyl complexes. The iridium-carbon bonds were found always stronger than the Rh-C and Pt-C ones in all surface species. The observed stretching wavenumbers and force constants seem to support the idea that CO and metal-carbon bonds are always stronger in metal carbonyl complexes than in adsorbed surface species. The distribution and mode of CO adsorption on surface metal sites can be effectively studied by means of infrared emission spectroscopy.     

Infrared reflection-absorption spectra of C2H4 and C2H6 on Cu: effect of surface roughness

Infrared reflection absorption spectroscopy (IRRAS) of the highly symmetric molecules C2H4 and C2H6 adsorbed as mono- and multilayers onto copper films is studied in relation to the type of metal-film roughness. Spectra of C2H4 show Raman lines on cold-deposited Cu films but not on Cu deposited at room temperature. For C2H6, the IR spectra from both types of metal films are similar; the surface infrared selection rule holds and no Raman bands are observed. The Raman lines that appear in the IR spectra already at low exposures are attributed to species adsorbed at special defect sites, identical to the so-called active sites in surface enhanced Raman scattering (SERS). The IR excitation mechanism by transient electron transfer to the adsorbate pi* state can deliver a discrete vibrational band of a Raman-active vibration only under certain circumstances, for example, for adsorbates at the "SERS-active sites". C2H6 at these sites cannot deliver Raman bands in IRRAS, because it has no pi* state. We also discuss IRRAS measurements on Cu(111) and Cu(110) single crystals, where Raman bands of C2H4 have been observed.     

过渡金属表面α-吡啶基的振动光谱学判据

基于簇模型采用密度泛函理论在B3LYP/6-311+G^**/LANL2DZ(metal)基组水平上计算了吡啶及α-吡啶基吸附于Pt、Pd、Rh、Ni四种金属表面的红外和拉曼光谱. 通过详细地分析和比较计算结果与文献报道的实验谱图, 提出了以N端吸附的吡啶分子和α-吡啶基这两种表面物种各自存在的谱学判据. 计算结果表明在以上四种金属表面, α-吡啶基的拉曼活性比吡啶的小, 而特征谱峰的红外强度与吡啶相当. 该结果表明红外光谱是检测金属表面α-吡啶基的有效手段, 也解释了采用表面增强拉曼光谱和红外光谱研究吡啶吸附在金属表面得出不同结构的原因.     

Surface-enhanced vibrational spectroscopy of B vitamins: what is the effect of SERS-active metals used?

Surface-enhanced Raman scattering (SERS) spectroscopy and surface-enhanced infrared absorption (SEIRA) spectroscopy are analytical tools suitable for the detection of small amounts of various analytes adsorbed on metal surfaces. During recent years, these two spectroscopic methods have become increasingly important in the investigation of adsorption of biomolecules and pharmaceuticals on nanostructured metal surfaces. In this work, the adsorption of B-group vitamins pyridoxine, nicotinic acid, folic acid and riboflavin at electrochemically prepared gold and silver substrates was investigated using Fourier transform SERS spectroscopy at an excitation wavelength of 1,064 nm. Gold and silver substrates were prepared by cathodic reduction on massive platinum targets. In the case of gold substrates, oxidation–reduction cycles were applied to increase the enhancement factor of the gold surface. The SERS spectra of riboflavin, nicotinic acid, folic acid and pyridoxine adsorbed on silver substrates differ significantly from SERS spectra of these B-group vitamins adsorbed on gold substrates. The analysis of near-infrared-excited SERS spectra reveals that each of B-group vitamin investigated interacts with the gold surface via a different mechanism of adsorption to that with the silver surface. In the case of riboflavin adsorbed on silver substrate, the interpretation of surface-enhanced infrared absorption (SEIRA) spectra was also helpful in investigation of the adsorption mechanism.     

Correlations between acidity, surface structure, and catalytic activity of niobium oxide supported on zirconia

The development of the acidity and the relationship between acidity, catalytic activity, and the surface structure for niobium oxide supported on zirconia were investigated for a series of solids. The catalysts were active for 2-propanol dehydration only above a threshold in Nb loading. The acidity was studied by infrared spectroscopy of adsorbed 2,6-dimethylpyridine as a probe molecule, and the onset of activity was correlated with that of the formation of relatively strong Br?nsted acid sites. The variation in the abundance of these sites also correlated with the catalytic activity. Raman, IR, and UV spectroscopy results indicated that the active sites were related to polymeric Nb surface species. These results were compared to those previously reported for the WO(x)/ZrO(2) catalysts.     

Competitive adsorption of aqueous metal ions on an oxidized nanoporous activated carbon

Competitive adsorption is the usual situation in real applications, and it is of critical importance in determining the overall performance of an adsorbent. In this study, the competitive adsorption characteristics of all the combinations of binary mixtures of aqueous metal ion species Ca2+(aq), Cd2+(aq), Pb2+(aq), and Hg2+(aq) on a functionalized activated carbon were investigated. The porous structure of the functionalized active carbon was characterized using N2 (77 K) and CO2 (273 K) adsorption. The surface group characteristics were examined by temperature-programmed desorption, Fourier transform infrared spectroscopy, Raman spectroscopy, acid/base titrations, and measurement of the point of zero charge (pHpzc). The adsorption of aqueous metal ion species, M2+(aq), on acidic oxygen functional group sites mainly involves an ion exchange mechanism. The ratios of protons displaced to the amount of M2+(aq) metal species adsorbed have a linear relationship for both single-ion and binary mixtures of these species. Hydrolysis of metal species in solution may affect the adsorption, and this is the case for adsorption of Hg2+(aq) and Pb2+(aq). Competitive adsorption decreases the amounts of individual metal ions adsorbed, but the maximum amounts adsorbed still follow the order Hg2+(aq) > Pb2+(aq) > Cd2+(aq) > Ca2+(aq) obtained for single metal ion adsorption. The adsorption isotherms for single metal ion species were used to develop a model for competitive adsorption in binary mixtures, involving exchange of ions in solution with surface proton sites and adsorbed metal ions, with the species having different accessibilities to the porous structure. The model was validated against the experimental data.     

SERS at structured palladium and platinum surfaces

Palladium and platinum are important catalytic metals, and it would be highly advantageous to be able to use surface enhanced Raman spectroscopy (SERS) to study reactive species and intermediates on their surfaces. In this paper we describe the use of templated electrodeposition through colloidal templates to produce thin (<1 microm) films of palladium and platinum containing close packed hexagonal arrays of uniform sphere segment voids. We show that, even though these films are not rough, when the appropriate film thickness and sphere diameter are employed these surfaces give stable, reproducible surface enhancements for Raman scattering from molecules adsorbed at the metal surface. We report SERS spectra for benzenethiol adsorbed on the structured palladium and platinum surfaces of different thicknesses and void diameters and show that, for 633 nm radiation, enhancements of 1800 and 550 can be obtained for palladium and platinum, respectively.     

In situ FTIR study on the formation and adsorption of CO on alumina-supported noble metal catalysts from H2 and CO2 in the presence of water vapor at high pressures

The formation and adsorption of CO from CO(2) and H(2) at high pressures were studied over alumina-supported noble metal catalysts (Pt, Pd, Rh, Ru) by in situ FTIR measurements. To examine the effects of surface structure of supported metal particles and water vapor on the CO adsorption, FTIR spectra were collected at 323 K with untreated and heat (673 K) treated catalysts in the absence and presence of water (H(2)O, D(2)O). It was observed that the adsorption of CO occurred on all the metal catalysts at high pressures, some CO species still remained adsorbed under ambient conditions after the high pressure FTIR measurements, and the frequencies of the adsorbed CO species were lower either for the heat treated samples or in the presence of water vapor. It is assumed that the CO absorption bands on atomically smoother surfaces appear at lower frequencies and that water molecules are adsorbed more preferentially on atomically rough surfaces rather than CO species.     

Light at the interface: the potential of attenuated total reflection infrared spectroscopy for understanding heterogeneous catalysis in water

IR spectroscopy has been an important tool for studying detailed interactions of reactants and reaction-intermediates with catalyst surfaces. Studying reactions in water is, however, far from trivial, due to the excessive absorption of infrared light by water. One way to deal with this is the use of Attenuated Total Reflection spectroscopy (ATR-IR) minimizing the path length of infrared light through the water. Moreover, ATR-IR allows for a direct comparison of reactions in gas and water on the same sample, which bridges the gap between separate catalyst investigations in gas and liquid phase. This tutorial review describes recent progress in using ATR-IR for studying heterogeneous catalysts in water. An overview is given of the important aspects to be taken into account when using ATR-IR to study heterogeneous catalysts in liquid phase, like the procedure to prepare stable catalyst layers on the internal reflection element. As a case study, CO adsorption and oxidation on noble metal catalysts is investigated with ATR-IR in gas and water. The results show a large effect of water and pH on the adsorption and oxidation of CO on Pt/Al(2)O(3) and Pd/Al(2)O(3). From the results it is concluded that water affects the metal particle potential as well as the adsorbed CO molecule directly, resulting in higher oxidation rates in water compared to gas phase. Moreover, also pH influences the metal particle potential with a clear effect on the observed oxidation rates. Finally, the future outlook illustrates that ATR-IR spectroscopy holds great promise in the field of liquid phase heterogeneous catalysis.     

Interaction of water with methanesulfonic acid on Pt single crystal electrodes

The electrochemical behavior of methanesulfonic acid on platinum single crystal electrode surfaces is investigated by cyclic voltammetry and infrared spectroscopy measurements. The results are compared with the voltammetric profiles of perchloric and trifluoromethanesulfonic acids. The differences are interpreted in terms of the effect of the anion on the structure of water. No adsorbed species are detected by infrared spectroscopy.     

Rh和Pt超薄层电极上的CO吸附行为(英文)

利用沉积在粗糙金电极上的过渡金属超薄层电极技术 ,我们获得了氢及一氧化碳在Rh和Pt表面上吸附的拉曼信号 ,并对两者之间的相互作用进行了分析 ..我们还进行了二氧化碳在这两种金属表面的还原行为的初步研究 ,以及对不同方式获得的一氧化碳吸附拉曼信号的特点进行了分析 .     

Vibrational study of the salicylate interaction with metallic ions and surfaces

Infrared and Raman spectroscopy are used in this work to study the metallic complexes of salicylic acid with silver and copper, comparing the interaction between salicylate and the cations (Ag+ and Cu2+) in the metal complexes with the SERS spectra when adsorbed on colloidal metal surfaces of the same metals. The salicylate complexes with the above metals were compared to those of Na+, Fe3+ and Al3+ cations. A different interaction mechanism is deduced for salicylate in the metal complex and when adsorbed on the metal surface.     

Temperature-programmed desorption study of the selective oxidation of alcohols on silica-supported vanadium oxide

The partial oxidation of methanol and ethanol on silica-supported vanadium oxide catalysts was studied using temperature-programmed desorption (TPD), Raman spectroscopy, and diffuse reflectance infrared spectroscopy (DRIFTS). Methanol TPD results for V2O5/SiO2 samples as a function of vanadia loading in conjunction with X-ray diffraction data and Raman spectra indicated that dispersed vanadia on silica agglomerates into vanadia crystallites during a CH3OH TPD experiment. For ethanol-dosed samples, agglomeration of the dispersed vanadia was less severe, and it was possible to measure the activation energy for the dehydrogenation of adsorbed ethoxides to produce CH3CHO. Assuming a preexponential factor of 10(13) s(-1), the activation energy for this reaction was estimated to be 132 kJ/mol. The results of this study further demonstrate that there is a relatively weak interaction between vanadia and silica and suggest that adsorbed methoxide species help facilitate agglomeration of dispersed vanadia.     

Relations between structure, acidity, and activity of WOx/TiO2: influence of the initial state of the support, titanium oxyhydroxide, or titanium oxide

Two series of WO(x)/TiO(2) catalysts, containing W surface densities up to 4.4 W atoms/nm(2), were prepared by pore volume impregnation of two different supports, titanium oxyhydroxide (amorphous) or titanium oxide (crystallized, 100% anatase). The influence of W surface density and the nature of the support on the surface structure, development of the acidity, and catalytic performances were examined. The texture and structure of the catalysts were investigated by Brunauer-Emmett-Teller measurements, X-ray diffraction (XRD), and Raman and infrared spectroscopy. The catalytic activity was tested for 2-propanol dehydration and n-hexane isomerization. For catalysts obtained by impregnation of titanium oxide, XRD and Raman results showed that W was present as a surface phase. Infrared spectra indicated an increase in the degree of polymerization of W species with increasing W surface density. CO and lutidine adsorption, followed by infrared spectroscopy, showed an increase in the strength and abundance of Br?nsted acid sites (measured after lutidine desorption at 573 K) with the W surface density above a threshold of 1.3 W atoms/nm(2). The development of Br?nsted acidity correlated with the evolution of the infrared bands attributed to polymerized W species. A direct relationship was observed between the concentration of Br?nsted acid sites and the catalytic activity for 2-propanol dehydration. Catalytic activity, for n-hexane isomerization, appears to be associated with the presence of highly condensed W species. The catalysts synthesized by impregnation of titanium oxyhydroxide exhibited a comparable behavior. Hence, for a given W surface density, the W surface structure, concentration of Br?nsted acid sites, and catalytic performances were similar. Thus, no significant effect of the initial form of the support (titanium oxyhydroxide versus titanium oxide; 100% anatase) was evidenced.     

正丁烷选择氧化过程中VPO体系的表面物种

用漫反射傅立叶变换红外光谱法,研究了VPO催化剂上正丁烷选择氧化制顺酐的表面物种及催化反应过程。催化剂暴露在1．5％n-C4 21％02＋N2的流动混合气中,流量为50mL/min,温度100－400℃,在催化剂表面上未观察到吸附的正丁烷,但发现了吸附的顺酐和COx。同时,检测到吸附的马来酸和高活性的烯烃物种。     

UV-VIS-NIR spectroscopy and microscopy of heterogeneous catalysts

This critical review article discusses the characterization of heterogeneous catalysts by UV-VIS-NIR spectroscopy and microscopy with special emphasis on transition metal ion containing catalysts. A review is given of the transitions, that can be observed in the UV-VIS-NIR region and the peculiarities of catalytic solids that have to be taken into account. This is followed by a short discussion of the techniques that have been developed over the years: diffuse reflectance spectroscopy, UV-VIS microscopy, in situ or operando spectroscopy, the combination of UV-VIS spectroscopy with other spectroscopic techniques, with chemometrics and with quantum chemistry. In the third part of this paper four successes of UV-VIS-NIR spectroscopy and microscopy are discussed; (1) coordination of transition metal ions to surface oxygens; (2) quantitative determination of the oxidation states of transition metal ions; (3) characterization of active sites and (4) study of the distribution of transition metal ions and carbocations in catalytic bodies, particles and crystals (104 references).     

Bonding in cis- and trans-dichlorobis(dimethylsulfide)platinum(II) studied by vibrational (micro)spectroscopy and force field calculations.

The vibrational spectra of the square-planar complexes cis- and trans-dichlorobis(dimethylsulfide)platinum(II) have been investigated using Raman and synchrotron infrared microscopy of small samples, and mid- to far-infrared spectroscopy of macroscopic samples. Synthesis of the compounds produces the cis- and trans-stereoisomers. Using microscopy we were able to identify single crystals of the trans isomer and amorphous regions containing both cis and trans isomers. The infrared and Raman data are interpreted using force field calculations. Spectral shifts are discussed in terms of influence of the cis- and trans-ligands. It is found that vibrational spectroscopy is a sensitive technique for measuring subtle chemical effects in transition metal complexes which complements and may improve studies made with X-ray crystallography.     

In Situ Raman Study of CO Electrooxidation on Pt(hkl) Single-Crystal Surfaces in Acidic Solution

The adsorption and electrooxidation of CO molecules at well-defined Pt(hkl) single-crystal electrode surfaces is a key step towards addressing catalyst poisoning mechanisms in fuel cells. Herein, we employed in situ electrochemical shell-isolated nanoparticle-enhanced Raman spectroscopy (SHINERS) coupled with theoretical calculation to investigate CO electrooxidation on Pt(hkl) surfaces in acidic solution. We obtained the Raman signal of top- and bridge-site adsorbed CO* molecules on Pt(111) and Pt(100). In contrast, on Pt(110) surfaces only top-site adsorbed CO* was detected during the entire electrooxidation process. Direct spectroscopic evidence for OH* and COOH* species forming on Pt(100) and Pt(111) surfaces was afforded and confirmed subsequently via isotope substitution experiments and DFT calculations. In summary, the formation and adsorption of OH* and COOH* species plays a vital role in expediting the electrooxidation process, which relates with the pre-oxidation peak of CO electrooxidation. This work deepens knowledge of the CO electrooxidation process and provides new perspectives for the design of anti-poisoning and highly effective catalysts.     

Acidity, surface structure, and catalytic performance of WO(x) supported on monoclinic zirconia

The relationship between the acidity, catalytic activity, and surface structure for tungsten oxide supported on zirconia was investigated for a series of solids prepared by equilibrium adsorption on monoclinic zirconia. The catalysts were active for propanol dehydration only above a threshold in W loading. The acidity was studied by infrared spectroscopy of adsorbed probe molecules (2,6-dimethylpyridine and CO), and the onset of activity was correlated with that of the formation of relatively strong Br?nsted acid sites. The variation in the abundance of these sites correlated with the catalytic activity. Lewis sites were present but could not be directly associated with the activity. Raman, IR, and UV spectroscopy results indicated that the active sites were related to polymeric W surface species.     

Catalysis

A brief summary of very recently published works on vibrational spectroscopic studies of adsorbed molecules (a) on metal single crystals or evaporated films with low surface area and (b) on supported metal catalysts or metal oxide catalysts with large surface area is presented here. So far as (a) is concerned some new results of EELS, reflection-absorption IR spectroscopy and IR emission spectroscopy (with cooled monochromator or interferometer) are discussed. With regards to topic (b) absorption by the support materials (SiO₂, Al₂O₃, MgO, TiO₂, etc.) usually prevents access to the region below about 1200 cm^–1. Therefore we concentrate mainly on the methods (diffuse reflection, photoacoustic or emission spectroscopy) offering vibrational data in a wide frequency range. Some new developments in emission and FIR spectroscopy in our laboratory are discussed.