Thermodynamic characterization of the amphoterism of oxides M<Subscript>2</Subscript>O<Subscript>3</Subscript> (M = As,Sb, Bi) and Their hydrates in aqueous media

Thermodynamic method was used to calculate, taking into account the formation of hydroxo complexes, the effect of the pH value on the molar solubility of M₂O₃ solid oxides and their hydrates at 25°C and the constants of acid-base equilibria in aqueous media for crystalline oxides and dissolved hydroxides M(OH)₃, where M = As, Sb, Bi.     

Quantum-chemical modeling of the electronic structure and chemical bond of Sn<Subscript>0.875</Subscript>M<Subscript>0.125</Subscript>O<Subscript>2</Subscript> (M = Cr,Mn, Co)

The electronic structure of the Sn_0.875M_0.125O₂ compounds (M = Cr, Mn, Co) with a rutile structure and magnetic moments of the transition metal atoms in them were calculated by the ab initio spin-polarized linear muffin-tin orbital method. The electron density and electron localization function maps for these compounds were constructed. Based on these data, the effect of the composition of these phases on the electronic spectrum, chemical bond, and magnetic and transport properties were analyzed.     

Complexation of Zn<Subscript>2</Subscript>[Fe(CN)<Subscript>6</Subscript>] with M<Superscript>2+</Superscript> (M = Mn,Co, Ni,Cu, Cd) in Zn<Subscript>2</Subscript>[Fe(CN)<Subscript>6</Subscript>] gelatin-immobilized matrices

Electrophilic substitution reactions Zn²⁺ M²⁺ (M = Mn, Co, Ni, Cu, Cd) in thin gelatin layers with immobilized zinc(II) hexacyanoferrate brought in contact with the aqueous solutions of d-element chlorides are studied. In all cases (except for Mn(II)), Zn atoms are partially replaced by all metals in question with the formation of the corresponding binuclear ZnM hexacyanoferrates(II). No complete replacement of Zn(II) to mononuclear hexacyanoferrate(II) of substituting metal occurs in neither of the cases.Translated from Koordinatsionnaya Khimiya, Vol. 31, No. 2, 2005, pp. 110–116. Original Russian Text Copyright © 2005 by Tatarintseva, Mikhailov, Naumkina, Lygina.     

Electrochemical processes on multi-component cathodic catalysts PtM and PtM<Subscript>1</Subscript>M<Subscript>2</Subscript> (M = Co,Ni, Cr): the effect of surface composition on the catalyst stability and its activity in O<Subscript>2</Subscript> reduction

The multi-component nanocatalysts based on platinum-transient metals alloys applied onto dispersed carbon material are considered as the most promising catalysts, which can be substituted for platinum in the fuel cell cathodes. The electrocatalytic activity of platinum in the PtM₁/C and PtM₁M₂/C alloys increases by several times with simultaneous increase in the stability. From the results obtained by structural and electrochemical methods, it is found that the synthesized binary and ternary catalysts are the metal alloys, whose surface is enriched in platinum as a result of surface segregation and subsequent chemical or electrochemical treatment. Under the corrosive attack, the less-noble metal, which has not entered into the alloy, dissolves, and the core-shell structures form. The properties of platinum in the shell differ from its properties in Pt/C due to the ligand effect of the core (metal alloy). As a result, the surface coverage with oxygen chemisorbed from water decreases in the binary and ternary systems. This causes an increase of the catalytic activity in the O₂ reduction reaction due to a decline in the effect of surface blocking against molecular oxygen adsorption and a decrease in the platinum dissolution rate, because the oxidation of platinum by water is the onset of corrosion process. For the catalytic systems studied, the mass activity decreases in the following order: 20% Pt in PtCoCr/C > 7.3% Pt in PtCo/C ≥ 7.3% Pt in PtCr/C and PtNi/C ≥ 40% Pt/C. The application of PtCoCr/C catalyst as the cathode in a low-temperature hydrogen-air fuel cell enabled one to reduce the platinum consumption by one half on retention of its performance.     

La<Subscript>1.8</Subscript>Sr<Subscript>0.2</Subscript>Ni<Subscript>0.8</Subscript>M<Subscript>0.2</Subscript>O<Subscript>4</Subscript> (M = Fe,Co, or Cu) Complex Oxides: Synthesis,Structural Characterization,and Dielectric Properties

New solid solutions La_1.8Sr_0.2Ni_0.8M_0.2O₄ (M = Fe, Co, or Cu) have been prepared, and their crystal- chemical characteristics and electric properties studied. The studied materials have been shown to have activation-time conductivity. Structural distortions have been found to affect the dielectric properties of ceramic samples. La_1.8Sr_0.2Ni_0.8M_0.2O₄ is observed to have the greatest distortion of АО₉ coordination polyhedra and a higher dielectric constant.     

Effect of structural,redox and acid characteristics of M<Subscript>x</Subscript>O<Subscript>y</Subscript>/ZrO<Subscript>2</Subscript>(Al<Subscript>2</Subscript>O<Subscript>3</Subscript>) (M-Mn,Co, Cr) oxide nanocomposites on their catalytic properties in the deep oxidation of methane

Alumina-and zirconia-manganese catalysts for the deep oxidation of methane were studied by X-ray phase analysis, temperature-programmed hydrogen reduction, and IR spectroscopy. The most active catalyst has the optimal combination of dimensional, redox, and acid characteristics. The zirconia-manganese catalysts formed on the surface of a kaolin-aerosil honeycomb matrix provides for 80–100% conversion of methane to CO₂ at 690–750 °C. __________ Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 43, No. 6, pp. 367–372, November–December, 2007.     

Synthesis,crystal structure,and vibrational spectra of M<Subscript>4</Subscript>V<Subscript>2</Subscript>O<Subscript>3</Subscript>(SO<Subscript>4</Subscript>)<Subscript>4</Subscript> (M = K,Rb, Cs)

Synthesis was performed and physicochemical properties were studied for the M₄V₂O₃(SO₄)₄ complexes, where M = K, Rb, or Cs. Their crystal structures were determined using the set of data from X-ray diffraction and neutron diffraction studies. All compounds crystallize in a triclinic lattice (space group \(P\bar 1\), Z = 2) with the parameters: a = 7.7688(2), 7.8487(1), 8.1234(1) Å; b = 10.4918(3), 10.8750(2), 11.1065(1) Å; c = 11.9783(4), 12.1336(2), and 11.8039(1) Å; α = 76.600(2)°, 77.910(1)°, 79.589(1)°; β = 75.133(2)°, 75.718(1)°, 87.939(1)°; γ = 71.285(2)°, 72.189(1)°, 75.567(1)°; V = 881.78(5), 945.42(3), 1014.34(2) ų for K, Rb, Cs, respectively. The structure of M₄V₂O₃(SO₄)₄ was found to be formed by discrete complex anions V₂O₃(SO₄) ₄ ^4? incorporating two oxygen-bridged vanadium atoms in a distorted octahedral oxygen environment. The sulfate groups are coordinated by the vanadium atoms in the chelating mode with a large scatter of S-O interatomic distances and OSO angles. Every VO₆ octahedron has a short terminal vanadium-oxygen bond with a length of about 1.6Å. The V₂O₃(SO₄) ₄ ^4? complex anions in potassium and rubidium compounds differ from that in Cs₄V₂O₃(SO₄)₄ in the type of symmetry and mutual spatial orientation. The vibrational spectra were presented and interpreted in line with the structural analysis data.     

Interactions in the NdF<Subscript>3</Subscript>-Nd<Subscript>2</Subscript>O<Subscript>3</Subscript>-MF<Subscript>2</Subscript> (M = Ba,Sr) systems

Isothermal anneals (at 873 K) and powder X-ray diffraction were used to study isothermal sections of phase diagrams of the NdF₃-Nd₂O₃-MF₂ (M = Ba, Sr) systems. In studying the NdF₃-Nd₂O₃-BaF₂ system, classical solid-phase synthesis was supplemented with mechanochemical activation of feedstock mixtures or BaF₂ activated with gaseous hydrogen fluoride was used. In both systems, a solid solution with the fluorite structure based on MF₂ and NdOF phases, a solid solution with the tysonite structure based on NdF₃, and an ordered fluorite-related phase Ba₄Nd₃F₁₇ were found. The NdOF-based solid solutions were shown to have polymorphism: β_trig ai α_cub at ≈800 K; a new trigonal phase of these solid solutions has been discovered. The effect of a dimensional factor $\left( {R_{Ba^{2 + } } > R_{Sr^{2 + } } } \right)$\left( {R_{Ba^{2 + } } > R_{Sr^{2 + } } } \right) on phase formation and unit cell parameters of the solid solutions was traced.     

Phase ratios in the M<Subscript>2</Subscript>O-V<Subscript>2</Subscript>O<Subscript>5</Subscript>-SO<Subscript>3</Subscript> (M = Rb,Cs) systems and the properties of the compounds formed in these systems

Powder X-ray diffraction and microscopy have been used to study phase ratios of the M₂O-V₂O₅-SO₃ (M = Rb, Cs) systems, which model the active component of rubidium-vanadium and cesium-vanadium catalysts for sulfuric acid production at high sulfur dioxide conversions. We have stated that each system forms four compounds: M₃VO₂(SO₄)₂, MVO₂SO₄, M₄V₂O₃(SO₄)₄, and MVO(SO₄)₂. The thermal properties of these compounds and their interaction with water vapor saturated at room temperature have been studied. The unit cell parameters have been determined for the compounds MVO₂SO₄ (M = K, Rb), MVO(SO₄)₂, and M[VO₂(SO₄)(H₂O)₂] · H₂O (M = Rb, Tl). The reciprocal transformations of the components and phases of the M₂O-V₂O₅-SO₃ systems match the Lux-Flood ideas of the acid-base properties of oxide compounds.     

Synthesis,structure, and properties of M<Subscript>3</Subscript>VO<Subscript>2</Subscript>(SO<Subscript>4</Subscript>)<Subscript>2</Subscript> (M = Rb,Cs)

Vanadium(V) complexes of general composition M₃VO₂(SO₄)₂ (M = Rb, Cs) were synthesized by a solid-state route. The individuality of the synthesized compounds was proved by X-ray and neutron diffraction, vibrational spectroscopy, and microscopic analysis. The X-ray diffraction patterns of M₃VO₂(SO₄)₂ were indexed to fit the monoclinic system (space group P2/c, Z = 4) with the following unit cell parameters: a = 11.6487(2) Å, b = 8.4469(2) Å, c = 12.1110(2) Å, β = 109.483(1)°, V = 1123.43 ų (Rb); a = 12.0546(3) Å b = 8.7706(2) Å, c = 12.6496(3) Å, β = 109.843(2)°, V = 1257.99 ų (Cs). In the crystal structure of M₃VO₂(SO₄)₂, [VO₂(SO₄)₂]^3? complex anions can be discerned in which the vanadium atom is surrounded by five oxygen atoms: two oxygen atoms form short terminal V–O bonds, and three oxygen atoms are from the two sulfato groups, one of which acts as a monodentate ligand and the other acts as a bidentate chelating ligand.     

Paramagnetic properties of triple molybdates CsNa<Subscript>5</Subscript>M<Subscript>3</Subscript>(MoO<Subscript>4</Subscript>)<Subscript>6</Subscript> (M = Ni,Co, Mn)

The static magnetization of CsNa₅M₃(MoO₄)₆ single phase molybdates, where M = Co, Ni, and Mn, is measured at 4–300 K in magnetic fields of up to 20 kOe. It is shown that the materials are paramagnetic. Magnetization as a function of temperature is described using the Curie–Weiss law. The intrinsic magnetic moments of the phases are found to be 9.759 (Co), 6.958 (Ni), and 12.203 Bohr magnetons for manganese molybdates. It is concluded that the charge state of Co, Ni, and Mn cations in the compounds is +2.     

Pivalates with the M<Superscript>II</Superscript><Subscript>4</Subscript>O<Subscript>4</Subscript> cubane core (M = Co,Ni): synthesis,structure, magnetic properties,and solid-state thermolysis

Methods were developed for the controlled thermal synthesis of high-spin cubane-like pivalates {M^II ₄(μ₃−OR)₄} (M = Co or Ni; R = H or Me) starting from mono-and polynuclear complexes. The solid-state thermal decomposition of the known pivalate clusters [M^II ₄(μ₃−OMe)₄−(μ₂−OOCBu^t)₂(η²−OOCBu^t)₂(MeOH)₄] and the new clusters [M₄^II(μ₃)−OH₄(η¹−OOCBu^t)₃−(μ−(NH₂)₂C₆H₂Me₂)₃(η¹−(NH₂)₂C₆H₂Me₂)₃]⁺(OOCBu^t)− (M = Co or Ni) was studied by differential scanning calorimetry and thermogravimetry. The thermolysis of cubane-like CoII and NiII pivalates is a destructive process. The phase composition of the decomposition products is determined by the nature of coordinated ligands and the structural features of the metal core.     

Reactivity of triangular oxalate cluster complexes [M<Subscript>3</Subscript>Q<Subscript>7</Subscript>(C<Subscript>2</Subscript>O<Subscript>4</Subscript>)<Subscript>3</Subscript>]<Superscript>2−</Superscript> (M = Mo or W; Q = S or Se)

The reactions of the oxalate complexes [M₃Q₇(C₂O₄)₃]²⁻ (M = Mo or W; Q = S or Se) with Mn^II, Co^II, Ni^II, and Cu^II aqua and ethylenediamine complexes in aqueous and aqueous ethanolic solutions were studied. The previously unknown heterometallic complexes [Mo₃Se₇(C₂O₄)₃Ni(H₂O)₅]·3.5H₂O (1) and K₃{[Cu(en)₂H₂O]([Mo₃S₇(ox)₃]₂Br)}·5.5H₂O (2) were synthesized. In these complexes, the oxalate clusters serve as monodentate ligands. The K(H₂en)₂[W₃S₇(C₂O₄)₃]₂Br·4H₂O salt (3) was isolated from solutions containing Co^II, Ni^II, or Cu^II aqua complexes and ethylenediamine. The reaction of [Mo₃Se₇(C₂O₄)₃]²⁻ with HBr produced the bromide complex [Mo₃Se₇Br₆]²⁻, which was isolated as (Bu₄N)₂[Mo₃Se₇Br₆] (4). Complexes 1–3 were characterized by X-ray diffraction, IR spectra, and elemental analysis. The formation of 4 was detected by electrospray mass spectrometry. Dedicated to Academician G. A. Abakumov on the occasion of his 70th birthday. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1645–1649, September, 2007.     

Formation of nanocrystalline structures in the Ln<Subscript>2</Subscript>O<Subscript>3</Subscript>-MO<Subscript>2</Subscript> systems (Ln = Gd,Dy; M = Zr,Hf)

The formation of (Ln³⁺)₂(M⁴⁺)₂O₇ (Ln = Gd, Dy; M = Zr, Hf) nanocrystallites obtained by annealing mixed hydroxides LnM(OH)₇ · nH₂O (precursors) synthesized by coprecipitation has been studied by synchronous thermal analysis, X-ray diffraction (normal and anomalous diffraction of synchrotron radiation), and EXAFS. In the systems under consideration, heat treatment of the X-ray amorphous precursors leads to their dehydration, and at 600–700°C, nanocrystallites with an fcc structure of disordered fluorite start forming. A further increase in temperature is accompanied by crystallite growth (CDD) and considerable change in the local structure of the heat-treated compounds. The crystallization enthalpies and activation energies have been determined.     

Complex amidoboranes M<Superscript>2</Superscript>[M<Superscript>1</Superscript>(NH<Subscript>2</Subscript>BH<Subscript>3</Subscript>)<Subscript>4</Subscript>] (M<Superscript>1</Superscript> = Al,Ga; M<Superscript>2</Superscript> = Li,Na, K,Rb, Cs)

Structural, spectral, and thermodynamic characteristics of complex amidoboranes M²[M¹(NH₂BH₃)₄] (M¹ = Al, Ga; M² = Li, Na, K, Rb, Cs) were calculated by the B3LYP/def2-SVPD quantum-chemical method. The procedure for the synthesis of these compounds by reactions of alkali metal amidoboranes with aluminum and gallium chlorides was suggested and experimentally tested. Reaction products were characterized by the NMR and IR spectroscopy and X-ray phase analysis.     

<Emphasis Type="Italic">Ab initio</Emphasis> structural study of M(mda)<Subscript>2</Subscript> complexes (M = Be,Mg, Ca; mda = C<Subscript>3</Subscript>O<Subscript>2</Subscript>H<Subscript>3</Subscript>)

The structure of M(mda)₂ (M = Be, Mg, Ca; mda = C₃O₂H₃) bis-complexes was investigated by the ab initio Hartree-Fock method and by including electron correlation in terms of second order Möller-Plesset perturbation theory; for calculations we used triple-zeta valence basis sets complemented with polarization functions. Two most probable geometrical nuclear configurations (D _2h and D _2d ) are considered for each molecule. The structure with two mutually orthogonal chelate ligands (D _2d symmetry) corresponds to the potential energy surface (PES) minimum. The planar D _2h configuration corresponds to the first order saddle point on PES; consequently, its relative energy determines the height of the barrier to the D _2d D _2h D _2d intramolecular rearrangement. Correlation equations that relate the calculated values of equilibrium internuclear distances, force constants, and rearrangement barrier heights to the value of the ionic radius of the metal atom have been obtained. These correlations were employed to evaluate the molecular constants for Sr(mda)₂ and Ba(mda)₂. The theoretical data are compared with the available experimental literature data.Original Russian Text Copyright © 2004 by V. V. Sliznev, S. B. Lapshina, and G. V. GirichevTranslated from Zhurnal Strukturnoi Khimii, Vol. 45, No. 4, pp. 611–623, July–August, 2004This revised version was published online in April 2005 with a corrected cover date.     

Magnetic and thermal analysis of <Emphasis Type="Italic">M</Emphasis>Fe<Subscript>2</Subscript>O<Subscript>4</Subscript> (<Emphasis Type="Italic">M</Emphasis> = Co,Mn, Zn) nanoparticles

Magnetic nanoparticles were prepared by a wet chemical method. Precursors of MFe₂O₄ (M = Co, Mn, Zn) were prepared from a mixture of metal chloride and metasilicate nonahydrate aqueous solutions. The precipitates obtained in the wet chemical method were calcined to obtain MFe₂O₄ nanoparticles encapsulated by amorphous SiO₂. The blocking temperatures T _B’s were between 20 and 320 K, in this temperature range, the anisotropy energy of the particles decreased below their thermal energy. T _B increased with the particle size. In order to clarify the nanoparticle formation process, differential thermal analysis and thermogravimetric (TG-DTA) measurements were performed for the as-prepared samples.     

Ionothermal syntheses of two new 2D metal-organic frameworks: (EMIM)<Subscript>2</Subscript>[M(Pydc)<Subscript>2</Subscript>] (M = Co,Zn)

Two new coordination polymers, (EMIM)₂[M(Pydc)₂] (M is Co, Zn; EMIM is 1-ethyl-3-methylimidazolium; H₂Pydc is 2,5-pyridinedicarboxylic acid), have been synthesized through the reaction of cobalt or zinc nitrate with H₂Pydc in the ionic liquid medium. The structures exhibit a two-dimensional 4.4-network with the imidazolium cations, acting as charge compensating agent, located between the layers of the coordination anion polymeric frameworks. The article is published in the original.     

La<Subscript>2</Subscript>M<Stack><Subscript>3</Subscript><Superscript>II</Superscript></Stack>Mn<Subscript>4</Subscript>O<Subscript>12</Subscript> (M = Mg,Ca, Sr,or Ba) manganites: Synthesis and X-ray diffraction study

La₂M ₃ ^II Mn₄O₁₂ (M = Mg, Ca, Sr, or Ba) manganites have been synthesized by ceramic technology from lanthanum oxide, manganese(III) oxide, and magnesium, calcium, strontium, or barium carbonate. X-ray powder diffraction shows that these compounds crystallize in cubic perovskite space group Pm3m.     

Water uptake and infrared absorption in SrZr<Subscript>0.95</Subscript>M<Subscript>0.05</Subscript>O<Subscript>3-</Subscript><Subscript>a</Subscript> (<Emphasis Type="Italic">M</Emphasis>=Ga,Sc, Y and Nd)

Summary Proton concentration in SrZr_0.95M_0.05O_3-α (M=Ga, Sc, Y and Nd) was measured with a thermobalance at different temperatures (T=673-973 K) and water vapor pressures (P_H2O=0.9-12.8 kPa). At all the pressures and temperatures examined, the amount of proton concentration in these samples is in the order of Sc>Y>Ga>Nd. By an equilibrium evaluation, we estimated the maximum possible proton concentration about 2.0 mol% in these samples. Infrared (IR) absorption spectra are measured in these samples. The absorption bands can be fitted by four (M=Ga, Y, Nd) or three (M=Sc) Gaussian bands.