化学气相沉积法制备氧化锡自组装纳米结构

采用化学气相沉积法在镀有5-10 nm厚金膜的SiO2衬底上, 通过控制生长条件, 实现了二氧化锡纳米结构的自组装生长, 成功制备出了莲花状和菊花状的二氧化锡自组装纳米结构. 利用扫描电子显微镜、X射线衍射等表征分析手段对样品的表面形貌、结构及成份进行表征和研究. 并在此基础上, 讨论了两种自组装纳米结构的生长机制.     

One-step synthesis of SnO2 and TiO2 hollow nanostructures with various shapes and their enhanced lithium storage properties

A versatile one-step method for the general synthesis of metal oxide hollow nanostructures is demonstrated. This method involves the controlled deposition of metal oxides on shaped α-Fe(2)O(3) crystals which are simultaneously dissolved. A variety of uniform SnO(2) hollow nanostructures, such as nanococoons, nanoboxes, hollow nanorings, and nanospheres, can be readily generated. The method is also applicable to the synthesis of shaped TiO(2) hollow nanostructures. As a demonstration of the potential applications of these hollow nanostructures, the lithium storage capability of SnO(2) hollow structures is investigated. The results show that such derived SnO(2) hollow structures exhibit stable capacity retention of 600-700?mA h g(-1) for 50?cycles at a 0.2?C rate and good rate capability at 0.5-1?C, perhaps benefiting from the unique structural characteristics.     

金属有机化学气相沉积法制备SnO2/MCM-41半导体传感器及其性能研究

采用金属有机化学气相沉积(MOCVD)法制备了SnO2/MCM-41半导体传感器, 考察了沉积时间和沉积温度对SnO2/MCM-41半导体传感器的SnO2沉积量、比表面积和孔径的影响; 研究发现, 随着SnO2沉积量的增加, 孔径有规律地下降, 说明SnO2较均匀地沉积在介孔分子筛MCM-41的孔道之中. SnO2/MCM-41半导体传感器对CO和H2具有较高的传感性能, 其传感性能的大小与CO和H2的浓度成正比.     

Growth of nanocrystalline MoO3 on Au(111) studied by in situ scanning tunneling microscopy

The growth of nanocrystalline MoO3 islands on Au(111) using physical vapor deposition of Mo has been studied by scanning tunneling microscopy and low energy electron diffraction. The growth conditions affect the shape and distribution of the MoO3 nanostructures, providing a means of preparing materials with different percentages of edge sites that may have different chemical and physical properties than atoms in the interior of the nanostructures. MoO3 islands were prepared by physical vapor deposition of Mo and subsequent oxidation by NO2 exposure at temperatures between 450 K and 600 K. They exhibit a crystalline structure with a c(4 x 2) periodicity relative to unreconstructed Au(111). While the atomic-scale structure is identical to that of MoO3 islands prepared by chemical vapor deposition, we demonstrate that the distribution of MoO3 islands on the Au(111) surface reflects the distribution of Mo clusters prior to oxidation although the growth of MoO3 involves long-range mass transport via volatile MoO3 precursor species. The island morphology is kinetically controlled at 450 K, whereas an equilibrium shape is approached at higher preparation temperatures or after prolonged annealing at the elevated temperature. Mo deposition at or above 525 K leads to the formation of a Mo-Au surface alloy as indicated by the observation of embedded MoO3 islands after oxidation by NO2. Au vacancy islands, formed when Mo and Au dealloy to produce vacancies, are observed for these growth conditions.     

SnO2 nanoparticle-functionalized boron nitride nanotubes

Boron nitride nanotubes (BNNTs) were synthesized by a carbon-free chemical vapor deposition method using boron and metal oxide as reactants. Then SnO(2) nanoparticles were functionalized on them via a simple wet chemistry method. Detailed transmission electron microscopy (TEM) observations reveal that SnO(2) nanoparticles may cover the tube surface or be encapsulated in tube channels. The lattice distances of both BNNT and SnO(2) have been changed due to the strong interactions between them. The band gap energy of SnO(2) particles is found enlarged due to the size effect and interaction with BNNTs.     

SnO2/TiO2复合纳米纤维的制备及光催化性能

采用静电纺丝技术,以聚乙烯吡咯烷酮和钛酸正丁酯为前驱体,制得锐钛矿相TiO2纳米纤维。以TiO2纳米纤维为模板,通过水热合成法,制备了具有异质结构的SnO2/TiO2复合纳米纤维。利用扫描电镜(SEM)、X射线能量色散光谱（EDS）、透射电镜(TEM)和X射线衍射(XRD)等分析测试手段对其形貌和结构进行了表征,结果表明,SnO2纳米粒子均匀地生长在TiO2纳米纤维表面,形成了异质结构的SnO2/TiO2复合纳米纤维材料。通过改变反应物浓度,能有效地实现SnO2/TiO2复合纳米纤维的可控合成。以罗丹明B为模拟污染物,考察了SnO2/TiO2复合纳米纤维的光催化性能,与纯TiO2纳米纤维相比光催化活性明显提高,初步探讨了光催化反应机理。     

Au/SnO2的制备及其低温CO氧化催化性能

用沉积-沉淀法制备了不同金含量的Au/SnO2催化剂.采用XRD和UV-Vis等手段对催化剂样品进行了表征并考察了沉积溶液的pH值、金的负载量、焙烧温度和气氛等对Au/SnO2催化CO氧化活性的影响.结果表明：当沉积溶液的pH=9～10时,所制得的金属金的平均粒径最小；随着金的负载量的增大,金属金的粒径增大, Au/SnO2的催化活性降低；在所研究的条件下, Au/SnO2前驱体在空气中473 K下焙烧4 h,得到的催化剂活性最高；在氢气中373 K下处理2 h的Au/SnO2的催化活性在所有样品中是最高的.     

Shape‐Controlled Growth of Carbon Nanostructures: Yield and Mechanism

Carbon nanostructures with precisely controlled shapes are difficult materials to synthesize. A facet‐selective‐catalytic process was thus proposed to synthesize polymer‐linked carbon nanostructures with different shapes, covering straight carbon nanofiber, carbon nano Y‐junction, carbon nano‐hexapus, and carbon nano‐octopus. A thermal chemical vapor deposition process was applied to grow these multi‐branched carbon nanostructures at temperatures lower than 350 °C. Cu nanoparticles were utilized as the catalyst and acetylene as the reaction gas. The growth of those multi‐branched nanostructures was realized through the selective growth of polymer‐like sheets on certain indexed facets of Cu catalyst. The vapor–facet–solid (VFS) mechanism, a new growth mode, has been proposed to interpret such a growth in the steps of formation, diffusion, and coupling of carbon‐containing oligomers, as well as their final precipitation to form nanostructures on the selective Cu facets.     

Site selective micro-patterned rutile TiO2 film through a seed layer deposition

Micro-patterned films obtained from micro-contact printing (microCP) method are often challenged by site selectivity limitation. For applications site-selectivity requires improvements. In this paper a site-selective deposition of the rutile TiO2 thin films on patterned SnO2 film, which was formed on the patterned octadecyltrichlorosilane (OTS) SAMs through microCP is described. The depositions proceeded in an environmentally friendly aqueous solution (SnCl4 and peroxotitanium acidic solution) at a lower temperature (80 degrees C). It is shown that the OTS SAMs has a good selectivity deposition for SnO2 particles, which was mainly dominated by the heterogeneous nucleation mechanism. The SnO2 layer had a structure-directing effect for growth of the rutile TiO2, which was usually formed above 600 degrees C. The patterned films were characterized by a variety of techniques, including ellipsometry, optical microscopy, SEM, AFM, XPS, and DLS to determine the thicknesses, topologies, microstructures, chemical compositions of the films, particle sizes and zeta potentials of the titanium particles.     

Synthesis and characterization of TiO2@C core-shell nanowires and nanowalls via chemical vapor deposition for potential large-scale production

TiO(2) nanowires and nanowalls core structures covered with carbon shell were selectively synthesized by a simple chemical vapor deposition (CVD) method using commercial titanium powder as the starting material. Morphology and structure of the products were characterized by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The core shell structure is composed of single crystalline rutile titanium dioxide wrapped by amorphous carbon shell. By adjusting the growth temperature, morphology of the products can be controlled from one-dimensional nanowires to two-dimensional nanowalls. While TiO(2)@C nanowires were a preferred structure at higher temperature, TiO(2)@C nanowalls dominated the final product at lower temperature. A growth mechanism was proposed based on the initial growth state of these nanostructures, in which solid-state diffusion of the elements involved in the reaction was assumed to play an essential role. The obtained TiO(2)@C core shell structures may find potential applications in various nanoscale realms such as optoelectronic, electronic and electrochemical nanodevices and the simple synthesis procedure promises large scale production and commercialization of the titanium oxide@carbon nanostructures.     

Polyvinylpyrrolidone-assisted ultrasonic synthesis of SnO nanosheets and their use as conformal templates for tin dioxide nanostructures

Single crystalline SnO nanosheets with exposed {001} facets have been prepared by an ultrasonic aqueous synthesis in the presence of polyvinylpyrrolidone, which hinders the spontaneous formation of the truncated bipyramidal SnO microcrystals and exfoliate them into layer-by-layer hierarchical structures and further into separate SnO nanosheets. The SnO nanosheets have been used as conformal sacrificial templates converted into polycrystalline SnO(2), as well as layered SnO/SnO(2) nanostructures, by calcination in air. The concept of fabrication of two-dimensional tin oxide nanostructures demonstrated here may be relevant for the crystal design of layered materials, in general.     

Synthesis of graphitic ordered macroporous carbon with a three-dimensional interconnected pore structure for electrochemical applications

In this study, ordered macroporous carbon with a three-dimensional (3D) interconnected pore structure and a graphitic pore wall was prepared by chemical vapor deposition (CVD) of benzene using inverse silica opal as the template. Field-emission scanning electron microscopy, transmission electron microscopy, X-ray diffraction, Raman spectrometry, nitrogen adsorption, and thermogravimetric analysis techniques were used to characterize the carbon samples. The electrochemical properties of the carbon materials as a carbon-based anode for lithium-ion batteries and as a Pt catalyst support for room-temperature methanol electrochemical oxidation were examined. It was observed that the CVD method is a simple route to fabrication of desired carbon nanostructures, affording a carbon with graphitic pore walls and uniform pores. The graphitic nature of the carbon enhances the rate performance and cyclability in lithium-ion batteries. The specific capacity was found to be further improved when SnO(2) nanoparticles were supported on the carbon. The specific activity of Pt catalyst supported on the carbon materials for room-temperature methanol electrochemical oxidation was observed to be higher than that of a commercial Pt catalyst (E-TEK).     

Control of Alq3 wetting layer thickness via substrate surface functionalization

The effects of substrate surface energy and vapor deposition rate on the initial growth of porous columnar tris(8-hydroxyquinoline)aluminum (Alq3) nanostructures were investigated. Alq3 nanostructures thermally evaporated onto as-supplied Si substrates bearing an oxide were observed to form a solid wetting layer, likely caused by an interfacial energy mismatch between the substrate and Alq3. Wetting layer thickness control is important for potential optoelectronic applications. A dramatic decrease in wetting layer thickness was achieved by depositing Alq3 onto alkyltrichlorosilane-derivatized Si/oxide substrates. Similar effects were noted with increasing deposition rates. These two effects enable tailoring of the wetting layer thickness.     

A solution-phase, precursor route to polycrystalline SnO2 nanowires that can be used for gas sensing under ambient conditions

This paper describes a solution-based, precursor method for the facile synthesis of uniform nanowires containing rutile SnO2 nanocrystallites. In a typical procedure, nanowires of approximately 50 nm in diameters and up to 30 mum in length were obtained as a white precipitate by refluxing SnC2O4.2H2O and poly(vinylpyrrolidone) in ethylene glycol. Structural analyses by XRD, FT-IR, and TGA indicate that these highly anisotropic nanostructures were formed in an isotropic medium through the aggregation of chainlike precursors that were, in turn, formed via polyol-mediated oligomerization. These nanowires could be further converted to polycrystalline SnO2 by calcination in air at 500 degrees C. The resultant nanowires of SnO2 were highly porous and could be used for gas sensing with improved sensitivity and reversibility under ambient conditions. We have also demonstrated that this new approach could be extended to generate polycrystalline nanowires of other metal oxides such as In2O3 and anatase TiO2.     

一维带状SnO2的电子传输性能

采用水辅助化学气相沉积法制备了结晶性好的一维带状SnO₂. 分别以小粒径锡粉和金修饰的小粒径锡粉作为反应原料制得带宽度不同的带状SnO₂, 小粒径锡粉作为反应原料能提高带状SnO₂的产率. 将所得SnO₂带和SnO₂纳米颗粒按不同比例混合配制成胶体, 采用刮涂法制备含不同比例纳米颗粒和纳米带的复合SnO₂薄膜并组装染料敏化太阳能电池(DSSCs)来评价带状SnO₂的电子输运性能. 组装的太阳能电池表现出与复合纳晶薄膜中一维SnO₂带的带宽度和所含比例密切相关的光电性能. 通过强度调制光电流谱的测量确定复合SnO₂薄膜的电子传输速率, 并进一步分析一维材料所具有的良好电子传输性能对光电流增加的贡献. 因为一维SnO₂带在复合纳晶薄膜中作为电子输运的快速通道可以加快电子的输运速度, 所以以适宜的比例添加具有合适宽度的一维SnO₂带可以明显提高太阳能电池的光电性能.     

酚类化合物在二氧化锡微粒修饰碳纤维电极上的氧化及检测

采用金属有机化学气相沉积技术制备了SnO2 修饰碳纤维微柱电极 ,讨论了电极的表面结构和稳定性 ,并利用循环伏安法分析了酚类化合物在电极上的电化学行为。该电极对酚类化合物有明显的电催化活性 ,并能防止酚类物质在碳纤维电极表面的电聚合。以 3 氯苯酚为测试物 ,其检测的线性浓度范围为 2× 10 -6～ 1.2× 10 -5mol/L     

Large-scale synthesis and microstructure of SnO2 nanowires coated with quantum-sized ZnO nanocrystals on a mesh substrate

Large-quantity single-crystal SnO(2) nanowires coated with quantum-sized ZnO nanocrystals (nc-ZnO/SnO(2) nanowires) were directly synthesized by thermal evaporation of SnO powder and a mixture of basic ZnCO(3) and graphite powders. A common stainless steel mesh was used to collect the products. The microstructure and possible growth mechanism of the nc-ZnO/SnO(2) nanowires were investigated. Results showed that tetragonal structured SnO(2) nanowires were obtained, whose surfaces were coated with single-layer ZnO nanocrystals with an average diameter of less than 5 nm. The nanowires had cross-rectangle section with width-to-thickness aspect ratio ranging from 2:1 to 5:1. The lengths of the nanowires were several tens of micrometers. ZnO nanocrystals were single crystalline wurtzite structures, which coated the whole nanowires and distributed uniformly. The possible growth mechanism of the composite nanowires may be enucleated that Zn atoms in the source vapor will replace the Sn atoms on the surface of the formed SnO(2) nanowires due to the higher reducibility of Zn than Sn. Two strong Raman scattering peaks at 626 and 656 cm(-1) appeared in the micro-Raman spectrum of nc-ZnO/SnO(2) nanowires. The origins of the peaks were discussed. Most importantly, the method can be extended to other composite oxide nanowires that are synthesized by oxidizing two kinds of metals, such as high reducibility elements Mg, Al, Zn, and Ti, and low reducibility elements In, Ge, Ga, etc.     

Unusual enhancement in electrical conductivity of tin oxide thin films with zinc doping

Electrical conductivity of SnO(2)-based oxides is of great importance for their application as transparent conducting oxides (TCO) and gas sensors. In this paper, for the first time, an unusual enhancement in electrical conductivity was observed for SnO(2) films upon zinc doping. Films with Zn/(Zn + Sn) reaching 0.48 were grown by pulsed spray-evaporation chemical vapor deposition. X-Ray diffraction (XRD) shows that pure and zinc-doped SnO(2) films grow in the tetragonal rutile-type structure. Within the low doping concentration range, Zn leads to a significant decrease of the crystallite size and electrical resistivity. Increasing Zn doping concentration above Zn/(Zn + Sn) = 0.12 leads to an XRD-amorphous film with electrical resistivity below 0.015 ? cm at room temperature. Optical measurements show transparencies above 80% in the visible spectral range for all films, and doping was shown to be efficient for the band gap tuning.     

Electrochemical templating of metal nanoparticles and nanowires on single-walled carbon nanotube networks

The use of single-walled carbon nanotube (SWNT) networks as templates for the electrodeposition of metal (Ag and Pt) nanostructures is described. Pristine SWNTs, grown on insulating SiO2 surfaces using catalyzed chemical vapor deposition, served as the working electrode. In the simplest case, electrical contact was made by depositing a gold strip on the SWNT substrate (device 1). Deposition of Ag and Pt over extensive periods (30 s) resulted in a high density of particles on the SWNTs, with almost contiguous nanowire formation from the Au/SWNT boundary moving to isolated nanoparticles at further distances from the contact. For direct electrochemical studies of Ag and Pt nucleation, the assembly was coated in a resist layer and a small window opened up to expose only the electrically connected SWNTs to solution (device 2). In this case, the electrochemical signature in voltammetric and amperometric studies of metal deposition was due solely to processes at the SWNTs. Coupled with high-resolution microscopy measurements (atomic force microscopy and field emission scanning electron microscopy), this approach provided detail on the nucleation and growth mechanisms of Ag and Pt on SWNTs under electrochemical control. In particular, Ag growth was found to be rapid and progressive with an increasing nanoparticle density with time, whereas Pt deposition was characterized by lower nucleation densities and slower growth rates with a tendency for larger particles to be produced over long times.     

High-density arrays of InGaN nanorings, nanodots, and nanoarrows fabricated by a template-assisted approach

Dense, crystalline arrays of InGaN nanorings, nanodots, and nanoarrows have been fabricated on GaN substrates by template-assisted nano-area selective growth. To create the nanostructures, we have used nanoporous anodic alumina films as templates to pattern nanopores in an SiO2 transfer layer, and then used this patterned SiO2 layer as a template for nitride growth by metalorganic chemical vapor deposition. We have varied the diameter of the deposited nitride nanostructures from 35 to 250 nm by changing the initial anodic alumina template structure. In addition, by controlling the nitride growth time we have created various types of nanostructures, from nanorings to nanoarrows. This structural evolution begins with the nucleation and formation of a nanoring structure, followed by coalescence and growth to form faceted nanodots, and finally lateral overgrowth to form faceted nanoarrows.