Cadmium(II)bis(oxalato)cobaltate(II)- pentahydrate

A mixed metal carboxylate, cadmium(II)bis(oxalato)cobaltate(II)pentahydrate, has been synthesized and characterized by elemental analysis, IR spectral, reflectance and X-ray powder diffraction studies. Thermal decomposition studies (TG, DTG and DTA) in air showed that the compound decomposed to CdCoO3 at 370°C through the formation of an anhydrous compound at ~194°C. Finally, CdCoO₂ is generated at 1000°C. DSC study in nitrogen up to 550°C showed the formation of a mixture of CdO and Co₃O₄ as end products. The kinetic parameters have been evaluated for the dehydration and decomposition steps using four non-mechanistic equations, i.e., Freeman and Carroll, Coats and Redfern, Flynn and Wall, MacCallum and Tanner equations. Using seven mechanistic equations, the rate controlling processes of the dehydration and decomposition mechanism are also inferred. The kinetic parameters, DH and DS obtained from DSC are discussed. IR and X-ray powder diffraction studies identified some of the decomposition products. A tentative mechanism for the decomposition in air is proposed. This revised version was published online in August 2006 with corrections to the Cover Date.     

Thermal decompostion studies on nickel(II) bis(oxalato)nickelate(II) pentahydrate

The paper describes the synthesis and thermal decomposition of nickel(II)bis(oxalato)nickelate(II)pentahydrate, Ni[Ni(C₂O₄)2].5H₂O. The complex was characterized by elemental analysis, infrared, electronic, e.s.r., magnetic moment measurement and X-ray powder diffraction studies. The thermal decompostion of the complex led to NiO in air at about 338° and in nitrogen at about 720°. The activation energies (E ^*) for the dehydration and decompostion reactions in air and nitrogen were evaluated. Tentative reaction mechanisms have been suggested for the termal decompostion of the complex in air and nitrogen.

---

Zusammenfassung Es wird die Synthese und thermische Zersetzung von Nickel(II) -bis(oxalato)- nickelat(II) - pentahydrat beschrieben: Ni[Ni(C₂O₄)2].5H₂O. Dieser Komplex wurde mittels Elementaranalyse, IR-Spektroskopie, ESR-Spektroskopie, der Messung des magnetischen Momentes sowie mittels Pulverdiffraktionsuntersuchungen charakterisiert. Im Ergebnis der thermischen Zersetzung entsteht NiO, in Luft bei etwa 338°, in Stickstoffatmosphäre bei ca. 720°. Die Aktivierungsenergien (E^*) der Dehydratations- und Zersetzungsreaktionen in Luft und in Stickstoff wurden ermittelt. Für die thermische Zersetzung des Komplexes in Luft bzw. in Stickstoff wurde ein Reaktionsmechanismus entwickelt.

---

---

The authors thank the RSIC, CDRI, Lucknow for microanalysis, RSIC, NEHU, Shillong for i.r. spectra, RSIC, IIT, Madras for far i.r. spectra, RSIC, Nagpur University for thermal analysis, Dr. S. K. Datta for Forensic Science Laboratory, Guwahati, Assam for DSC and Dr. K. L. Deori of Dibrugarh University for X-ray powder diffraction photographs.     

Thermal Behaviour of the N-donor Adducts of Metal Saccharinates: I. 2,2'-bipyridine saccharinato complexes of Co(II), Ni(II), Cu(II), Zn(II) and Pb(II)

The adducts of Co, Ni, Cu, Zn and Pb saccharinates with 2,2'-bipyridine were synthesized and their thermal behaviour in the 20–1000°C temperature interval in a static air atmosphere was investigated. Regardless of the coordination, the decomposition starts with dehydration and proceeds with removal of the bipyridine ligand(s). The resulting metal(II) saccharinates adopt characteristic two-step decomposition, the first step being the SO₂ release. Their stability was found tobe metal-dependent. The thermal decomposition pathways were correlated with the existing structural data about the compounds.This revised version was published online in November 2005 with corrections to the Cover Date.     

Spectrothermal studies on Co(II), Ni(II), Cu(II) and Zn(II) salicylato (1,10-phenanthroline) complexes

The cobalt, nickel, copper and zinc atoms in bis(1,10-phenanthroline)bis(salicylato-O)metal(II) monomeric octahedral complexes [M(Hsal)₂(phen)₂]·nH₂O, (M: Co(II), n=1; Cu(II), n=1.5 and Ni(II), Zn(II), n=2) are coordinated by the salicylato monoanion (Hsal) through the carboxyl oxygen in a monodentate fashion and by the 1,10-phenanthroline (phen) molecule through the two amine nitrogen atoms in a bidentate chelating manner. On the basis of the DTG_max, the thermal stability of the hydrated complexes follows order: Ni(II) (149°C)>Co(II) (134°C)>Zn(II) (132°C)>Cu(II) (68°C) in static air atmosphere. In the second stage, the pyrolysis of the anhydrous complexes takes place. The third stage of decomposition is associated with a strong exothermic oxidation process (DTA curves: 410, 453, 500 and 450°C for the Co(II), Ni(II), Cu(II) and Zn(II) complexes, respectively). The final decomposition products, namely CoO, NiO, CuO and ZnO, were identified by IR spectroscopy. This revised version was published online in July 2006 with corrections to the Cover Date.     

Synthesis and Thermal Decomposition of Cobalt(II) bis (Tartrato) Cobaltate(II) Trihydrate

The paper describes the synthesis and characterization of cobalt(II) bis (tartrato) cobaltate(II) trihydrate Co[Co[C₄O₆H₄)₂]·3H₂O. The complex was characterized on the basis of elemental analysis, infrared, electronic, e.s.r. spectra and X-ray powder diffraction studies. The thermal decomposition of the complex led to a mixture of Co₂O₃and Co₃O₄in air at about 400°C, whereas in nitrogen it was decomposed to a mixture of CoO and C at about 384°C. A tentative reaction mechanism is suggested for the thermal decomposition of the complex in air and nitrogen. This revised version was published online in July 2006 with corrections to the Cover Date.     

Synthesis and Thermal Decomposition of [Ni2(C4H4O6)2]·7H2O

The paper describes the synthesis, characterization and thermal decomposition of nickel(II) bis(tartrato) nickelate(II) heptahydrate [Ni₂(C₄H₄O₆)₂]·7H₂O. The complex was characterized by elemental analysis, magnetic moment measurement, infrared, ESR and electronic spectroscopy. The experimental evidences indicate that complex is likely to have metal bonding. The thermal decomposition of the complex produced NiO in air at about 360°C and in nitrogen at about 380°C as the final product. Some of the intermediates produced during the thermolysis were isolated by temperature arrest technique and identified by analytical and spectroscopic methods. A tentative reaction mechanism is proposed for the thermal decomposition of the complex in air and nitrogen.This revised version was published online in November 2005 with corrections to the Cover Date.     

Study on thermal decomposition of copper(II) acetate monohydrate in air

The thermal decomposition of copper(II) acetate monohydrate (CuAc₂·H₂O) under 500 °C in air was studied by TG/DTG, DTA, in situ FTIR and XRD experiments. The experimental results showed that the thermal decomposition of CuAc₂·H₂O under 500 °C in air included three main steps. CuAc₂·H₂O was dehydrated under 168 °C; CuAc₂ decomposed to initial solid products and volatile products at 168–302 °C; the initial solid products Cu and Cu₂O were oxidized to CuO in air at 302–500 °C. The copper acetate peroxides were found to form between 100 and 150 °C, and the dehydration of these peroxides resulted in the presence of CuAc₂·H₂O above 168 °C. The initial solid products were found to be the admixture of Cu, Cu₂O, and CuO, not simply the single Cu₂O as reported before. Detailed reactions involved in these three steps were proposed to describe the complete mechanism and course of the thermal decomposition of CuAc₂·H₂O in air.     

Thermal dehydration and decomposition of M[M(C2O4)2]·xH2O (x=3 forM=Sr(II) andx=6 forM=Hg(II))

Strontium(II) bis (oxalato) strontium(II) trihydrate, Sr[Sr(C₂O₄)₂]·3H₂O and mercury(II) bis (oxalato) mercurate(II) hexahydrate, Hg[Hg(C₂O₄)₂]·6H₂O have been synthesized and characterized by elemental analysis, reflectance and IR spectral studies. Thermal decomposition studies (TG, DTG and DTA) in air showed SrCO₃ was formed at ca. 500°C through the formation of transient intermediate of a mixture of SrCO₃ and SrC₂O₄ around 455°C. Sharp phase transition from γ-SrCO₃ to β-SrCO₃ indicated by a distinct endothermic peak at 900°C in DTA. Mercury(II) bis (oxalato) mercurate(II) hexahydrate showed an inclined slope followed by surprisingly steep slope in TG at 178°C and finally 98.66% of weight loss at 300°C. The activation energies (E ^*) of the dehydration and decomposition steps have been calculated by Freeman and Carroll and Flynn and Wall's method and compared with the values found by DSC in nitrogen. A tentative reaction mechanism for the thermal decomposition of Sr[Sr(C₂O₄)₂]·3H₂O has been proposed.     

Furopyridines and furopyridine-Ni(II) complexes

Summary The thermal decomposition of the complexes Ni(SCN)₂(fp)₄·2H2O (I), Ni(SCN)₂(mfp)₄ (II) and Ni(SCN)₂(dmfp)₃ (III) (where fp=furo[3,2-c]pyridine, mfp=2-methylfuro[3,2-c]pyridine and dmfp=2,3-dimethylfuro[3,2-c]pyridine) have been investigated in dynamic air from room temperature to 1000°C by means of TG, DTG and DTA. The chemical composition of the complexes, solid intermediates and the resultant products of thermolysis have been identified by means of elemental analysis and complexometric titration. The results revealed that NiO was left as residue at the end of the thermal degradation experiments. IR data suggested that fp, mfp and dmfp were coordinated to Ni(II) through the N atom of the respective heterocyclic ring.     

Hydroxyapatite-supported copper(II)-catalyzed azide-alkyne [3+2] cycloaddition with neither reducing agents nor bases in water

Copper(II)-exchanged hydroxyapatite, prepared by ion-exchanging of Ca(II) in calcium hydroxyapatite [Ca₁₀(PO₄)₆(OH)₂] with Cu(NO₃)₂ at 70 °C in water, functions as a reusable heterogeneous catalyst with neither reducing agents nor bases for azide-alkyne [3+2] cycloaddition at 50 °C in water under air.     

The thermal properties of cobalt(II), nickel(II) and copper(II) iminodiacetates

The thermal properties of the Cu(II), Ni(II) and Co(II) complexes of iminodiacetic acid (H₂IMDA) were determined using TG, DTG and DSC techniques. The complexes, of general formula, MIMDA-2H₂O evolved water of hydration from 50 to 150°C which was followed by the decomposition of the anhydrous complex in the 250 to 400°C temperature range. The thermal stability, as determined by procedural decomposition temperatures, was: Ni(II) >Co(II) >Cu(II). The thermal stability is discussed in terms of IR spectra, ΔH, and ΔS, as well as thermal data.     

Syntheses and spectrothermal studies of triethanolamine complexes of Co(II), Ni(II), Cu(II) and Cd(II) squarates

The triethanolamine complexes, [M(tea)₂]sq·nH₂O, (n=2 for Co(II), n=0 for Ni(II), Cu(II) and n=1 for Cd(II), tea=triethanolamine, sq²⁻=squarate), have been synthesized and characterized by elemental analyses, magnetic susceptibility and conductivity measurements, UV-Vis and IR spectra, and thermal analyses techniques (TG, DTG and DTA). The Co(II), Ni(II) and Cu(II) complexes possess octahedral geometry, while the Cd(II) complex is monocapped trigonal prismatic geometry. Dianionic squarate behaves as a counter ion in the complexes. The thermal decomposition of these complexes takes place in three stages: (i) dehydration, (ii) release of the tea ligands and (iii) burning of organic residue. On the basis of the first DTG_max of the decomposition, the thermal stability of the anhydrous complexes follows the order: Ni(II), 289°C>Co(II), 230°C>Cu(II), 226°C>Cu(II), 170°C in static air atmosphere. The final decomposition products — the respective metal oxides — were identified by FTIR spectroscopy.     

The thermal properties of the copper(II), nickel(II) and cobalt(II) glycinates

The thermal properties of the Ni(II), Co(II) and Cu(II) complexes of glycine were determined using TG, DTG and DSC techniques. The complexes, MGly₂·nH₂O (n = 1, 2), dehydrated in the temperature range of 75 to 200°C, followed by the decomposition of the anhydrous compounds in the temperature range of 200 to 400°C. The thermal stability of the complexes, as determined by procedural decomposition temperatures, was: Ni(II) >Co(II) >Cu(II).     

Thermal decomposition of bishydrazinocarboxylate iron(II) di-hydrazinate

Low temperature (T<200°C) thermal decomposition in air of bishydrazinocarboxylate iron(II) dihydrazinate [Fe(II)(N₂H₃COO)₂(N₂H₄)₂] is known to produce-Fe₂O₃ in ultrafine form [1–4]. This decomposition process is known to be exothermal and autocatalytic but details regarding the stepwise mechanism of decomposition is yet unknown although a few attempts have been made with limited success [1, 5]. In our present work, we have combined the results from (i) thermal analysis of complex precursor and (ii) characterization of products isolated at intermediate and final stages of decomposition in order to explain the stepwise mechanism of decomposition of Fe(N₂H₃COO)₂(N₂H₄)₂ in air.

---

Zusammenfassung Mittels DTA/TG/DTG, XRD sowie IR wurde die thermische Zersetzung von Bis-hydrazinocarboxylat-eisen(II)-dihydrazinat untersucht. Die thermische Zersetzung verläuft in sechs Schritten und endet bei genügend niedriger temperatur mit der Bildung von-Fe₂O₃. Durch Auswertung der Untersuchungsdaten konnten die einzelnen Zwischenprodukte, darunter eine neuartige Verbindung FeO₂.2CO, identifiziert werden.

---

---

NCL Communication No. 4613.

---

One of us (KBG) wishes to thank the Council of Scientific and Industrial Research for the award of the senior research fellowship. We are grateful to Dr. P. Ratnasamy for his continuing interest in our work.     

Thermal decomposition of copper(II) benzenetricarboxylates in air atmosphere

The conditions of thermal decomposition of copper(II) benzenetricarboxylates in air atmosphere at heating rates of 10 and 5 deg·min^–1 were studied. At 10 deg · min^–1, the hemimellitate and trimesinate of copper(II) lose crystallization water and then decompose directly to CuO, whereas at 5 deg·min^–1 they decompose to CuO through Cu₂O. The trimellitate of copper(II) heated at various rates decomposes in the same way: it loses 1 water molecule and then decomposes directly to CuO.     

Synthesis of ferrites: Thermal analysis of some transition metal tris(maleato)ferrates(III)

Thermal analysis of some transition metal ferrimaleate precursors, M₃[Fe(mal)₃]₂·xH₂O (M=Mn, Co, Ni, Cu) has been studied in static air atmosphere from ambient to 600°C. Various physico-chemical techniques, i.e. TG, DTG, DTA, XRD, IR, Mössbauer spectrometry, have been employed to characterize both the intermediates and final products. After dehydration the anhydrous precursors undergo decomposition to yield an iron(II) intermediate, M[Fe^II(mal)₂] (M=Mn, Co, Ni, Cu) in the temperature range 160-275°C. A subsequent oxidative decomposition of iron(II) species leads to the formation of -Fe₂O₃ and MO in the successive stages. Finally a solid-state reaction occurs between the oxides above 400°C resulting in the formation of transition metal ferrites, MFe₂O₄. The ferrites have been obtained at much lower temperature and in less time than in the conventional ceramic method.This revised version was published online in November 2005 with corrections to the Cover Date.     

Mössbauer spectroscopic and X-ray diffraction study of the thermal decomposition of Fe(CH3COO)2 and FeOH(CH3COO)2

Thermal decomposition of iron(II) acetate, Fe(CH₃COO)₂, and iron(III) acetate hydroxide, FeOH(CH₃COO)₂, has been studied using⁵⁷Fe Mössbauer spectroscopy and X-ray diffraction. Samples were thermally treated in air atmosphere between 150°C and 1000°C. The formation of maghemite '-Fe₂O₃, and hematite, -Fe₂O₃, is discussed. Hematite appears as the final decomposition product.     

Ultrasound assisted syntheses of a nano-structured two-dimensional mixed-ligand cadmium(II) coordination polymer and direct thermolyses for the preparation of cadmium(II) oxide nanoparticles

A nano-sized mixed-ligand Cd(II) coordination polymer, {[Cd(bpa)(4,4′-bipy)₂(H₂O)₂](ClO₄)₂}_n (1); bpa = trans-1,2-bis(4-pyridyl)ethane and 4,4′-bipy = 4,4′-bipyridine, has been synthesized by a sonochemical method and characterized by IR and ¹H NMR spectroscopy. Compound 1 grows in one dimension by two different bridging ligands, 4,4′-bipy and bpa. The thermal stability of compound 1 in the bulk form and nano-sized was studied by thermogravimetric (TG) and differential thermal analysis (DTA). The crystallinity of this compound was studied by X-ray powder diffraction and compared with an XRD simulation of the single crystal data. CdO nanoparticles were obtained by direct calcination at 500 °C and decomposition in oleic acid at 200 °C of the nano-sized compound 1. The obtained cadmium(II) oxide nano-particles were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM).     

Tin(II)-EDTA complex: kinetic of thermal decomposition by non-isothermal procedures

Tin on the oxide form, alone or doped with others metals, has been extensively used as gas sensor, thus, this work reports on the preparation and kinetic parameters regarding the thermal decomposition of Sn(II)-ethylenediaminetetraacetate as precursor to SnO₂. Thus, the acquaintance with the kinetic model regarding the thermal decomposition of the tin complex may leave the door open to foresee, whether it is possible to get thin film of SnO₂ using Sn(II)-EDTA as precursor besides the influence of dopants added.The Sn(II)-EDTA soluble complex was prepared in aqueous medium by adding of tin(II) chloride acid solution to equimolar amount of ammonium salt from EDTA under N₂ atmosphere and temperature of 50 °C arising the pH∼4. The compound was crystallized in ethanol at low-temperature and filtered to eliminate the chloride ions, obtaining the heptacoordinated chelate with the composition H₂SnH₂O(CH₂N(CH₂COO)₂)₂·0.5H₂O.Results from TG, DTG and DSC curves under inert and oxidizing atmospheres indicate the presence of water coordinated to the metal and that the ethylenediamine fraction is thermally more stable than carboxylate groups. The final residue from thermal decomposition was the SnO₂ characterized by X-ray as a tetragonal rutile phase.Applying the isoconversional Wall-Flynn-Ozawa method on the DSC curves, average activation energy: E_a=183.7±2.7 and 218.9±2.1 kJ mol⁻¹, and pre-exponential factor: and 19.10±0.27 min⁻¹, at 95% confidence level, could be obtained, regarding the loss of coordinated water and thermal decomposition of the carboxylate groups, respectively. The E_a and log A also could be obtained applying isoconventional Wall-Flynn method on the TG curves.From E_a and log A values, Dollimore and Malék procedures could be applied suggesting R3 (contracting volume) and SB (two-parameter model) as the kinetic model to the loss of coordinated water (177-244 °C) and thermal decomposition of the carboxylate groups (283-315 °C), respectively. Simulated and experimental normalized DTG and DSC curves besides analysis of residuals check these kinetic models.     

Novel polymeric metal complexes as dye sensitizers for Dye-sensitized solar cells based on poly thiophene containing complexes of 8-hydroxyquinoline with Zn(II),Cu(II) and Eu(III) in the side chain

Novel polymeric metal complexes as dye sensitizer for dye-sensitized solar cells (DSSCs) based on poly thiophene containing complexes of 8-hydroxyquinoline with Zn(II),Cu(II), and Eu(III) in the side chain have been synthesized according to the Stille coupling method and characterized by FTIR, GPC, and Elemental analysis. The UV-vis absorption spectroscopy, photoluminescence spectroscopy, cyclic voltammetry, and the applications in dye-sensitized solar cells (DSSCs) are also determined and studied. The DSSCs fabricated by PZn(Q)₂-co-3MT, PCu(Q)₂-co-3MT, and PEu(Q)₃-co-3MT exhibit good device performance with a power conversion efficiency of up to 0.56%, 0.78%, and 1.16%, respectively, under simulated AM 1.5 G solar irradiation (100 mW/cm²). They possess excellent stabilities and their thermal decomposition temperatures are 340 °C, 400 °C, and 540 °C, respectively, indicating polymeric metal complexes are suitable for the fabrication processes of optoelectronic devices.