A host-guest optical sensor for aliphatic amines based on lipophilic cyclodextrin

A host-guest optical sensor for the determination of aliphatic amines as exemplified by octylamine is proposed. It is based on the reversible fluorescence enhancement of heptakis(2,6-di-O-isobutyl)-β-cyclodextrin(DOB-β-CD) hosting tetraphenylporphyrin (TPP) immobilized in poly(vinyl chloride) (PVC) membrane by aliphatic amine extracted from aqueous phase into membrane phase. The optimum membrane contained 1.15 wt % TPP, 6.15 wt % DOB-β-CD as sensing reagent and other membrane materials. The fluorescence enhancement of the membrane resulted from the formation of a stable three-component complex among DOB-β-CD, TPP, and aliphatic amines. With the optimum conditions described, the fluorescence response of the sensor to octylamine shows a good correlation with the theoretically derived equation in the range 1.0 × 10^–6 to 8.0 × 10^–4 mol/L. The response characteristics including reversibility, response time, reproducibility and lifetime and selectivity of this optical device are also discussed in detail. This sensor has also been applied for the determination of octylamine in water samples containing interferents with satisfactory recovery.     

A selective sensing membrane for the determination of tetracycline with heptakis (2,6-di-O-isobutyl)-β-cyclodextrin as the substrate

When heptakis (2,6-di-O-isobutyl)-β-cyclodextrin(DOB-β-CD) is immobilized in a plasticized poly vinyl chloride (PVC) membrane, it extracts tetracycline (TC) from the sample solution into the organic membrane phase to form a complex of DOB-β-CD and TC. Since the complex formation results in an enhancement of fluorescence intensity of TC at 506 nm, the chemical recognition process can be directly translated into an optical signal. The maximum response of the sensitive membrane for TC was obtained in 0.2 mol/l KH₂PO₄–KOH buffer solution (pH 8.01). In the optimum conditions described, the proposed sensor responds linearly in the measuring range of 2.00×10⁻⁶ mol/l to 4.00×10⁻⁴ mol/l, and has a detection limit of 8.00×10⁻⁷ mol/l. The response time of the sensor is within 2.0 min. In addition to high reproducibility and reversibility, the sensor also exhibits good selectivity over some common pharmaceutical species and some common organic and inorganic compounds.     

A fluorescent sensing membrane for iodine based on intramolecular excitation energy transfer of anthryl appended porphyrin

A single anthryl appended meso-tetraphenylporphyrin (TPP) dyad has been synthesized and applied in fluorescence sensing of iodine based on the intramolecular excitation energy transfer. The molecular recognition of the sensor is based on the interaction of iodine with inner anthracene moiety of the dyad, while the signal reporter for the recognition process is the TPP fluorescence quenching. Because the emission spectrum of anthracene is largely overlapped with the Soret band absorption of TPP, intramolecular excitation energy transfer interaction occurs between the donor, anthracene and acceptor, TPP. This energy transfer leads to TPP fluorescence emission by excitation of anthracene. The sensor was constructed by immobilizing the dyad in a plasticized poly(vinyl chloride) (PVC) membrane. The sensing membrane shows higher sensitivity compared to the sensors by using anthracene, TPP, or a mixture of anthracene and TPP as sensing materials. Under the optimum conditions, iodine in a sample solution can be determined from 2.04 to 23.6 mmol·L⁻¹ with a detection limit of 33 nmol·L⁻¹. The sensing membrane shows satisfactory response characteristics including good reproducibility, reversibility and stability, as well as the short response time of less than 60 s. Except for Cr₂O₇²⁻ and MnO₄⁻, other common metal ions and anions in foodstuff do not interfere with iodine determination. The proposed method was applied in the determination of iodine in table salt samples. The results agree well with those obtained by other methods. Supported by the National Outstanding Youth Science Foundation of China (Grant No. 20525518), the National Natural Science Foundation of China (Grant No. 20775005), and the National Natural Science Foundation of Hunan province (Grant No. JJ076021)     

Study on the Inclusion Compounds of Eugenol with α-, β-, γ- and Heptakis (2,6-di-O-methyl)-β-cyclodextrins

Several host–guest inclusion compounds of eugenol as a guest molecule and cyclodextrins (α-,β-,γ-CD) and heptakis (2,6-di-O-methyl)-β-cyclodextrin (DMβ-CD) as hosts were investigated in the solid state and in aqueous solution. The one-to-one solid inclusion compounds of eugenol and β-CD or γ-CD were prepared, but those of eugenol with α- or DMβ-CD were not obtained under the same condition. However, the UV-visible absorption spectroscopy data indicated that the liquid guest could form a 1:1 inclusion compound with all four hosts respectively in aqueous solution. The two solid inclusion compounds were characterized by powder X-ray diffraction (XRD), infrared spectroscopy (IR), thermogravimetric analysis (TG), differential scanning calorimetry (DSC) and nuclear magnetic resonance (NMR). The association constants (K), calculated from the modified Benesi–Hidebrand equation, of eugenol with α-, β-, γ- and DMβ-CD is 4.95 × 10⁴, 3.96 × 10⁵, 1.47 × 10⁵ and 9.33 × 10⁴ mol⁻¹ dm³, respectively.     

Effects of cyclodextrins and saccharides on dual fluorescence of N,N-dimethyl-4-aminophenylboronic acid in water

N,N-Dimethyl-4-aminophenylboronic acid (DMAPB) showed pH-dependent dual fluorescence at 360 and 462 nm originating from locally excited (LE) and twisted intramolecular charge transfer (TICT) states, respectively, in aqueous solutions. Upon complexation with α-CD, LE fluorescence was markedly increased while TICT fluorescence was decreased. In contrast, both LE and TICT fluorescence were increased when DMAPB was complexed with β-CD. The fluorescence variations enabled us to determine the 1:1 and 1:2 binding constants of the DMAPB/α-CD complex to be 10 and 40 M⁻¹, respectively, and the 1:1 binding constant of the DMAPB/β-CD complex to be 635 M⁻¹. The dual fluorescence of DMAPB alone was found to be a good indicator of saccharide sensing. Under weakly alkaline conditions, saccharides suppressed TICT fluorescence while increasing LE fluorescence. Among the saccharides investigated, d-fructose induced the largest fluorescence change, followed by d-ribose and d-glucose. This order is consistent with the stability of the boronate esters of DMAPB with saccharides. In the presence of β-CD, saccharide selectivity was unchanged, while fluorescence was amplified. These results demonstrate the superiority of the supramolecular DMAPB/β-CD complex to DMAPB alone as a ratiometric fluorescence sensor for saccharides in water.     

Optical sensor for berberine utilizing its intrinsic fluorescence enhanced by the formation of inclusion complex with butylated-β-cyclodextrin

An optical sensor for berberine, the basic ingredient of the widely used traditional Chinese medicine Coptis Chinensis, based on its intrinsic fluorescence enhanced by butylated-β-cyclodextrin (HDB-β-CD) immobilized in plasticized poly(vinyl chloride) (PVC) membrane has been developed. The drastic enhancement of fluorescence intensity of berberine was attributed to the formation of an inclusion complex between HDB-β-CD and berberine, which has been utilized as the basis of the fabrication of a berberine-sensitive fluorescence sensor. The proposed sensor was quite distinct from those fluorescent sensors for berberine reported so far which relied upon quenching the fluorescence of the sensing reagent immobilized on membrane by berberine. The response mechanism of optode membrane was discussed in detail from the view of molecular dynamics and the optimum steric configuration of the inclusion complex was presented by molecular dynamics simulation. The analytical performance characteristics of the proposed berberine-sensitive sensor were investigated. The sensor can be applied to the quantification of berberine with a linear range covering from 4.0×10⁻⁷ to 2.0×10⁻⁵ mol l⁻¹ with a detection limit of 8.0×10⁻⁸ mol l⁻¹. The sensor exhibits excellent reproducibility, reversibility and selectivity. The recommended method was successfully used for the determination of berberine in pharmaceutical preparations.     

Determination of pheniramine enantiomers in eye drop by capillary electrophoresis using hydroxypropyl-β-cyclodextrin as chiral selector

A capillary zone electrophoresis procedure has been developed for the chiral determination of pheniramine in eye drop. Native and derivative cyclodextrins (CDs) including γ-CD, β-CD, hydroxypropyl-β-CD and dimethyl-β-CD were tested as chiral selectors. Using 30 mM hydroxypropyl-β-CD in 50 mM phosphate buffer (pH 3.0), the acceptable resolution value (R = 1.55) was obtained. The assay was validated for linearity (3.3 × 10⁻⁶–5.0 × 10⁻⁴ M; R ² = 0.9996), limit of detection (3.3 × 10⁻⁶ M), limit of quantification (8.5 × 10⁻⁶ M), analytical precision by terms of intra- and inter-day variability (RSD ≤ 2.57%), and accuracy (recovery ≥ 89.3%). The content of pheniramine in eye drop obtained by the proposed method was in good agreement with the declared value. The results indicated that pheniramine in the eye drop was present as the racemate.     

Chiral separation of pheniramine by capillary electrophoresis partial-filling technique using hydroxypropyl-β-cyclodextrin as chiral selector

A simple capillary electrophoresis partial-filling technique for the enantioseparation of pheniramine is presented. Phosphate buffer and hydroxypropyl-β-cyclodextrin (HP-β-CD) were used as the electrolyte and chiral selector, respectively. Several experimental parameters such as HP-β-CD concentration, HP-β-CD plug length, CE temperature and applied voltage were studied. Under the selected conditions, pheniramine enantiomers can be separated within less than 14 min. The assay was validated for linearity (5.0 × 10⁻⁶–5.0 × 10⁻⁴ M; R ² = 0.9987), limit of detection (5.0 × 10⁻⁷ M), limit of quantitation (5.0 × 10⁻⁶ M), analytical precision (%RSD ≤ 9.8) and accuracy (%recovery = 101 ± 3). The proposed methodology was then applied to the analysis of a commercially available pharmaceutical eye drop preparation. The results are in good agreement with that declared by the manufacturer. The proposed methodology provides adequate results in terms of simplicity, cost, sample throughput, repeatability and accuracy for quality control of pheniramine enantiomers in pharmaceutical preparations.     

Development of a new flow-through bulk optode for the determination of manganese(II)

A flow-through bulk optode based on the use of 1-(2-pyridylazo)-2-naphthol (PAN) immobilized in a plasticized poly(vinyl chloride) membrane entrapped in a cellulose support, in conjuntion with the flow injection analysis technique, is proposed for the determination of manganese(II). The calibration graph obtained at 570 nm was linear in the range 0.27–27.5 mg L^–1 (5 × 10^–6– 5 × 10^–4 M) Mn(II) with a detection limit of 0.18 mg L^–1. The coefficients of variation of the sensor response for 5.5 mg L^–1 of Mn(II) were ±0.22% for consecutive measurements (n = 10), ±0.48% between days (n = 5) and ±0.38% between different membranes (n = 6). The sensor was readily regenerated with the carrier acetic acid/acetate buffer of pH 4.5. The method was applied to the determination of manganese in steels, waters and lemon tree leaves. Received: 13 December 2000 / Revised: 25 January 2001 / Accepted: 26 January 2001     

Electrochemical determination of electroinactive guests of β-cyclodextrin at a self-assembled monolayer interface

A novel determination method of electroinactive molecules by means of electrochemical technique is presented. A new self-assembled monolayer containing cyclodextrin (CD) is prepared with mono(6-o-p-tolylsulfonyl)-β-cyclodextrin. Although this derivatization process leads to a β-CD coverage of 10% of a full monolayer, this layer shows an effective host-guest response to ferrocene. The interfacial ferrocene complexation gives a response similar to that expected for a Langmuir adsorption isotherm yielding a stability constant of 4.2 ×104 mol-1· L and a maximum ferrocene coverage of 8.6×10-12 mol/cm2. The redox peak currents of the surface-confined ferrocene decrease upon addition of competing β-CD guest species to the solution, such as m-toluic acid (mTA) and sodium dodecyl sulfonate (SDS). This principle has been used for the determination of the electroinactive molecules, mTA and SDS in the concentration ranges of 0.8-2.7 μmol/L and 5-100 nmol/L, respectively.     

Spectrofluorimetric Study of an Inclusion Complex of 2-Hydroxypropyl-β-Cyclodextrin with the Antitumour 11-Methyl Benzophenothiazine. Analytical Application to Urine

The electronic absorption and fluorescence spectral properties of 11-methyl-12H-benzo[a]phenothiazine (11-MeBPHT) were investigated in various media (water, ethanol, β-cyclodextrin (β-CD) and 2-hydroxypropyl-β-cyclodextrin (HP-β-CD) aqueous solutions). Fluorescence quantum yields were respectively about 20 and 2 times larger in HP-β-CD and β-CD than in water. The formation of a 1:1 stoichiometry inclusion complex between 11-MeBPHT and HP-β-CD (association constant K _f=118±3 M⁻¹ at 20 °C) was studied in aqueous medium by fluorescence spectroscopy. Analytical figures of merit were satisfactory for 11-MeBPHT with linear dynamic ranges over at least two orders of magnitude and limits of detection (LODs) between 0.2 and 1 ng/ml according to the medium. An analytical application to the determination of 11-MeBPHT in human urine samples by the standard addition procedure led to satisfactory recovery percentages (91–108%).     

Complex Formation of Cyclodextrins with Various Thiophenes and their Polymerization in Water: Preparation of Poly-pseudo-rotaxanes containing Poly(thiophene)s

Cyclodextrins (α-CD, β-CD and 2,6-di-O-dimethyl-β-CD (DM-β-CD)) were found to form inclusion compounds with thiophenes (thiophene (T), bithiophene (2T)) in water and in crystalline states. The structures of α-CD–T, β-CD–2T, and DM-β-CD–2T inclusion complexes were determined by X-ray crystallography. DM-β-CD forms a 1:1 cage type complex with 2T. In contrast, β-CD formed 2:3 (CD:guest) complexes with thiophene and α-CD formed 2:3 complexes, both of the channel type. These inclusion complexes were found to polymerize by FeCl₃ in the inclusion compounds in water. The products were formed poly-pseudo-rotaxane between cyclodextrins and poly(thiophene) characterized by IR, ¹H-NMR and ¹³C CP/MAS NMR. The molecular weights of the poly-pseudo-rotaxanes with poly(thiophene) were determined by the MALDI-TOF mass spectra to be 3000–5000. In comparison between poly-pseudo-rotaxane (DM-β-CD–poly(thiophene)), authentic poly(thiophene) and the washed DM-β-CD–poly(thiophene) which was washed with DMF to dethread DM-β-CD, these poly-pseudo-rotaxane was characterized by Raman, UV–vis and fluorescence spectra. The maximum emission band of DM-β-CD–poly(thiophene) shifted to a shorter wavelength. The hypsochromic shift was derived from poly-pseudo-rotaxane with DM-β-CD.     

Spectral Characteristics of Sulfa Drugs: Effect of Solvents,pH and <Emphasis Type="Italic">β</Emphasis>-Cyclodextrin

The absorption and fluorescence spectra of sulfamethoxazole (SMO), sulfisoxazole (SFO), sulfathiazole (STO) and sulfanilamide (SAM) in different solvents, pH and β-cyclodextrin (β-CD) have been analyzed. The inclusion complexes of the above sulfa drugs with β-CD were investigated by UV-visible spectroscopy, fluorometry, DFT, SEM, FT-IR and ¹H NMR. The solvent study indicates that the position of the substituent (oxazole or thiazole group) in the SAM molecule (R–SO₂–NH-group) is not the key factor to change the absorption and emission behavior of these sulpha drug molecules. In aqueous solution, a single fluorescence band (340 nm) was observed whereas in solutions of β-CD dual emission (430 nm) was noticed in sulpha drug compounds. Formation of the inclusion complex in SMO, SFO and STO should result dual emission which is due to a Twisted Intramolecular Charge Transfer band (TICT). The β-CD study indicates that (i) sulpha drugs form 1:1 inclusion complexes with β-CD and (ii) the red shift and the presence of TICT in the β-CD medium confirms heterocyclic ring encapsulated in the β-CD cavity with the aniline ring present on the out side of the β-CD cavity.     

Fluorimetric and molecular mechanics study of the inclusion complex of 2-quinoxalinyl-phenoxathiin with β-cyclodextrin

The complex formed by the inclusion of the polarity-sensitive fluorescent probe 2-[2′-quinoxalinyl]-phenoxathiin (QP) into β-cyclodextrin (β-CD) was investigated by steady-state fluorescence spectroscopy in order to confirm the previously stated intramolecular charge transfer nature of the first excited singlet state of QP. A decrease in the emission intensity in the presence of β-CD was observed and explained on this basis. The 1:1 stoichiometry of the inclusion complex and its association constant of 2,223 M⁻¹ were computed. The QP–β-CD complex was further studied by molecular mechanics (MM+ force field), in order to determine its structure and the type of interactions between QP and β-CD. All possible ways QP could penetrate the β-CD cavity were considered and several structures were generated and optimized. The interaction, binding (van der Waals and electrostatic contributions) and perturbation energies were also calculated. The results have showed that the β-CD cavity incorporates the central part of QP and that complexation is mainly due to van der Waals host–guest interactions.     

Pseudorotaxane complexes of naphthylpyridines and naphthylbipyridyl with β-cyclodextrin and hydroxypropyl-β-cyclodextrin

The electronic absorption spectra and fluorescence spectra of 4-(2-naphthyl)pyridine (1), 2-(4-methyl-2-pyridyl)-4-(2-naphthyl)pyridine (2), and 4-(2-naphthyl)-2-phenylpyridine (3) in solutions and in complexes with β-cyclodextrin (β-CD) and well water-soluble hydroxy-propyl-β-cyclodextrin (HP-β-CD) were studied. Fluorescence near 475 nm observed in aqueous solutions of compounds 1–3 arises from protonated forms of these compounds produced in the excited state. Results of DFT quantum chemical calculations show an increase in proton affinity energies of excited-state naphthylpyridines 2 and 3. The formation of inclusion complexes with cyclodextrins makes protonation of compounds 2 and 3 more difficult, which manifests in large hypsochromic shifts of fluorescence band maxima. The stability constants of the complexes 1·HP-β-CD and 2·HP-β-CD determined from their fluorescence spectra are 3425 and 3760 L mol⁻¹, respectively. The stability constant of the complex 3·HP-β-CD (5500±600 L mol⁻¹) was found from the changes in the solubility of naphthylpyridine 3 in water upon complexation. Semiempirical quantum chemical calculations of the molecular structures and thermodynamic characteristics of pseudorotaxane inclusion complexes of trans-2, cis-2, and trans-2·H₂O with HP-β-CD were carried out. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 272–280, February, 2007.     

Optical fiber sensor for berberine based on fluorescence quenching of 2-(4-diphenylyl)-6-phenylbenzoxazole

A new optical fiber sensor was prepared for the determination of berberine in aqueous solution using a micrometer-sized flow-cell and a bifurcated optical fiber. The sensing is based on fluorescence quenching of 2-(4-diphenylyl)-6-phenylbenzoxazole (PBBO) in the PVC membrane. This process is accompanied by non-fluorescent ground-state complex formation. With this sensor, berberine can be determined in sample solutions from 2.42 × 10^–5 mol L^–1 to 6.04 × 10^–7 mol L^–1. Satisfactory reproducibility, reversibility, and short response times of less than 1 min are realized. The sensor also shows good selectivity over some common pharmaceutical species and alkali and alkali-earth metal salts, and can be used for the direct assay of berberine in commercial tablets. The results are in correspondence with those obtained by the pharmacopoeia method. Received: 4 April 1997 / Revised: 8 August 1997 / Accepted: 12 August 1997     

Highly selective thiocyanate poly(vinyl chloride) membrane electrode based on a cadmium–Schiff’s base complex

A PVC membrane electrode based on a cadmium–salen (N,N′-bis-salicylidene-1,2ethylenediamine) complex as an anion carrier is described. The electrode has an anti-Hofmeister selectivity sequence with a preference for thiocyanate at pH 1.5–11.0. It has a linear response to thiocyanate from 1.0 × 10^–6 to 1.0 × 10^–1 mol L^–1 with a slope of 59.1 ± 0.2 mV per decade, and a detection limit of 7 × 10^–7 mol L^–1. This electrode has high selectivity for thiocyanate relative to many common organic and inorganic anions. The proposed sensor has a fast response time of approximately 15 s. It was applied to the determination of thiocyanate in a milk sample. Received: 1 December 2000 / Revised: 19 April 2001 / Accepted: 30 April 2001     

Optical fiber sensor for berberine based on fluorescence quenching of 2-(4-diphenylyl)-6-phenylbenzoxazole

A new optical fiber sensor was prepared for the determination of berberine in aqueous solution using a micrometer-sized flow-cell and a bifurcated optical fiber. The sensing is based on fluorescence quenching of 2-(4-diphenylyl)-6-phenylbenzoxazole (PBBO) in the PVC membrane. This process is accompanied by non-fluorescent ground-state complex formation. With this sensor, berberine can be determined in sample solutions from 2.42 × 10^–5 mol L^–1 to 6.04 × 10^–7 mol L^–1. Satisfactory reproducibility, reversibility, and short response times of less than 1 min are realized. The sensor also shows good selectivity over some common pharmaceutical species and alkali and alkali-earth metal salts, and can be used for the direct assay of berberine in commercial tablets. The results are in correspondence with those obtained by the pharmacopoeia method. Received: 4 April 1997 / Revised: 8 August 1997 / Accepted: 12 August 1997     

Selective lanthanum ions optical sensor based on covalent immobilization of 4-hydroxysalophen on a hydrolyzed triacetylcellulose membrane

An optical sensor membrane is described for the determination of lanthanum(III) ions based on the immobilization of 4-hydroxysalophen on a hydrolyzed triacetylcellulose membrane. 4-Hydroxysalophen is covalently bonded to a transparent hydrolyzed triacetylcellulose film. The sensing membrane in contact with lanthanum ions at pH 4.0 changes color from white-yellow to orange (323 to 433 nm). Under the optimum conditions, the proposed membrane displayed a linear range from 1.0 × 10⁻⁶ to 1.0 × 10⁻² M La(III) with a limit of detection of 1 × 10⁻⁷ M. The response time of the membrane was within 5–6 min depending on the concentration of La(III) ions. The selectivity of the probe towards lanthanum ions was found to be excellent. The sensor was successfully applied to the determination of La(III) in water, industrial waste water, and in NIST-615 (glass matrix) and NIST-3127a (lanthanum solution) samples with satisfactory results.     

Optosensing of hydrochloric acid based on the fluorescence quenching of a flavone copolymer

An optical fiber sensor for the continuous determination of hydrochloric acid is presented. It is based on the fluorescence quenching of a flavone containing copolymer membrane by hydrochloric acid. The quenching efficiency is greatly enhanced in the presence of Fe(III). This enhancement is attributed to the primary inner filter effect, as well as the formation of a complex between the 4′-N,N-dimethylaminoflavone group in the copolymer and the Fe(III) species extracted from hydrochloric acid solution. The optical response is linear and reversible for 0.10–6.00 mol L^–1 HCl with a response time of the order of a second. The standard deviations for repeated alternative measurements of 0.20 and 2.00 mol L^–1 hydrochloric acid are 0.32% and 0.46% (n = 10), respectively, indicating a good reproducibility. Because of the covalently bonding of the dye to polymer, the sensor exhibits also a good stability. Selectivity has also been evaluated for some potential interferents. The sensor in conjunction with a flow-injection system can be used for on-line determination of hydrochloric acid. Received: 15 January 1998 / Revised: 14 April 1998 / Accepted: 18 April 1998