仿生智能纳米通道在能量转换中的应用

智能纳米通道由于独特的纳米结构,导致对离子的通过具有选择性、整流性和门控性,从而在能量转换领域具有重要的应用前景。本文根据能量转换原理的不同,将纳米通道在能量转换中的应用分为:模仿电鳗鱼将化学能转换为电能,模仿绿叶将光能转换为化学能,模仿菌紫质将光能转换为电能,模仿水力发电机将流体机械能转换为电能。其中,模仿电鳗鱼系统由于广泛的能量来源、高的能量转换效率以及输出的能量形式为电能,应用前景最为广阔。能量转换的性能受纳米通道自身的几何结构以及内表面电荷密度的影响。除此之外,还受外界条件的影响,比如电解质溶液类型和浓度,浓差和气压差的大小以及pH值等。     

Weibull mixture model for modeling nonisothermal kinetics of thermally stimulated solid-state reactions: application to simulated and real kinetic conversion data

The possibility of applying Weibull mixture model for the fitting of the nonisothermal kinetic conversion data has been investigated. It has been found that the kinetic conversion data at different heating rates can be successfully described by one or the linear combination of few Weibull distribution functions. Several simulated and real kinetic conversion traces have been analyzed. An optimal fitting of the kinetic conversion data has been obtained by a mixture of Weibull distribution functions. The results obtained have shown that the obtained conversion curves calculated by the model proposed in this paper are in agreement with the raw kinetic conversion data.     

hytic Acid Conversion Coatings of Magnesium

A chrome‐free conversion coating treatment for magnesium by phytic acid solution was developed. The immersion experiments were used for evaluating the effects of the processing parameters (such as conversion temperature and time, concentration and pH value of phytic acid solution) on the corrosion resistance of the phytic acid conversion coating. The morphologies and compositions of the coatings were determined by SEM and EDS respectively. The experimental results indicated that the corrosion resistance of the conversion coating formed in the solution containing 0.5% phytic acid at 25°C and pH=4 for 30 min was higher than that of natural oxide, and the conversion coating formed on the surface of magnesium was of multilayer mainly consisting of Mg, C, O and P. The thicknesses of the conversion coatings were approximately 1.0–15 µm and the conversion coatings presented obvious network‐like cracks. The electrochemical potentiodynamic polarization experiment indicated that the free corrosion potential of the magnesium with phytic acid conversion coating was increased, and its corrosion current and corrosion rate declined in 3.5% NaCl solution. Phytic acid conversion coating could improve the electrochemical property of magnesium and provide effective protection, which can improve the corrosion resistance of magnesium.     

Effects of fluid slippage on pressure-driven electrokinetic energy conversion in conical nanochannels

The effects of fluid slippage on the pressure-driven electrokinetic energy conversion in conical nanochannels are systematically investigated in this paper. We present a multiphysical model that couples the Planck–Nernst–Poisson equations and the Navier–Stokes equation with a Navier slip condition to fulfill this purpose. We systematically look into the variation of various performance indicators of electrokinetic energy conversion, for example, streaming current, streaming potential, generation power, energy conversion efficiency, regulation parameter, and enchantment ratio, with the conicity of nanochannels and the slip length for two pressure differences of the same magnitude but opposite directions. Particularly, enhancement ratios related to streaming current, streaming potential, generation power, and energy conversion efficiency are defined to comprehensively measure the enhancement of the performance of electrokinetic energy conversion due to the slip length. The results demonstrate that a combination of large slip length and small conicity enhances the electrokinetic energy conversion performance significantly. Furthermore, the fluid slippage-induced enhancement of the electrokinetic energy conversion in the backward pressure difference mode is stronger than that in the forward pressure difference mode. Our results provide design and operation guidelines for pressure-driven electrokinetic energy conversion devices.     

脉冲电晕放电-催化转化CO2为CO

在常温、常压下，较系统地研究了CO2在脉冲电晕等离子体条件下的活化与转化，考察了反应器参数、脉冲成形电容、应用电压、气体流量、电晕极性对二氧化碳转化的影响。在本实验条件下，最佳反应器的有效长度为125mm,内径为22mm。二氧化碳转化率和一氧化碳产率随应用电压的增加而增加。另外，随着应用电压的增加，脉冲反应器的能量利用效率反而降低。随着气体流量的增大，二氧化碳的转化率及一氧化碳的产率下降。γ-Al2O3的存在大大促进了二氧化碳的转化，CO2的最高转化率达23％。由于γ-Al2O3在物化性质方面的特性，γ－Al2O3的存在对二氧化碳的转化有重要的作用。研究表明：脉冲电晕放电－催化转化CO2为CO是可行的。     

CO2气氛苯尖端放电等离子体转化试验研究

本文研究了CO2为气化介质时,等离子体辅助煤气化过程中焦油组分苯发生的非热转化特性,建立了焦油组分苯、CO2单电极尖端放电非平衡态等离子体反应体系。通过煤气分析仪对转化反应的产物进行分析,并采用可见发射光谱技术对等离子体进行诊断。结果表明,在该反应体系中,苯转化生成的气态产物是CO与CO2的混合气,而H元素直接被氧化生成H20。能量密度对于苯转化反应起主导作用。在相同能量密度条件下,降低苯浓度也能够提高苯的转化率,但改变气速增加反应时间并不能提高苯的转化率。此外,通过光谱分析可得苯的非热转化可由CO2直接解离产生的O自由基触发。     

Direct conversion of natural gas to higher hydrocarbons: A review

Direct conversion of methane to higher hydrocarbons is an effective process to solve the problem of natural gas utilization. Although remarkable progress has been achieved on the dehydro-aromatization of methane (DAM), low conversion caused by severe thermodynamic limitations, coke formation, and catalysis deactivation remain important drawbacks to the direct conversion process. Molybdenum catalysts supported on HZSM-5 type zeolite support are among the most promising catalysts. This review focuses on the aspects of direct methane conversion, in terms of catalysts containing metal and support, reaction conditions, and conversion in different types of reactors. The reaction mechanism for this catalytic process is also discussed.     

Microbial conversion of 4-oxoisophorone by thermomonospora curvata using an air-bubbling hollow fiber reactor

Microbial conversion of 4-oxoisophorone (OIP) by thermophilic bacteriumThermomonospora curvata was attempted in a continuous process. The correlation between cell growth and microbial conversion was first examined in a batch culture. The results indicated that this microbial conversion was strongly dependent upon cell growth. In a continuous microbial conversion of OIP using a continuous stirred tank reactor, the cell density in the reactor seemed to be the limiting factor in the OIP conversion. Therefore, we developed an air-bubbling hollow fiber reactor to achieve a high density culture. By using this bioreactor, more than 3.3 times higher productivity was achieved. In addition, during the process, only a slight cell contamination to the product was observed. Therefore, this bioreactor is suitable for the continuous microbial conversion, considering further downstream processes and high productivity.     

Al 6061/SiCp稀土转化膜的组成、结构及性能

铝金属基复合材料以其多方面的优异性能在航空、航天、汽车、电子和光学等工业领域中显示出了十分广泛的应用前景［１ ,２］．某些种类的（如ＳｉＣ颗粒增强）铝金属基复合材料已经开始走向工业规模的应用［３］．然而,在铝金属基复合材料中由于增强体的存在使其内部组织结构极不均匀,在使用环境中极易形成腐蚀微电池而遭受点蚀、剥蚀、磨蚀等等腐蚀形式的破坏［４ ,５］ ．适用于常规铝合金防腐处理方法的阳极氧化法和铬酸盐化学氧化法（Ａｌｏｄｉｎｅ法）存在着下述弊端而不能对铝金属基复合材料起到有效的防腐作用：１）铝金属基复合…     

Sonochemical growth of lanthanum conversion films using ultrasonic immersion method for performance improvement of zinc electrodes

The growth of lanthanum conversion coatings on the zinc powder modified by ultrasonic immersion is deeply investigated by Auger electron spectroscopy, X-ray photoelectron spectroscopy, spectrophotometrical and other characterization techniques. The conversion kinetics of La element and the growth mechanism of lanthanum conversion layers are also reported and proposed. The influence of the lanthanum conversion coatings on the discharge properties and cycle behaviors of zinc electrodes is evaluated through charge–discharge measurements and cycle voltammetry. It is found that La₂O₃ and ZnO compose the lanthanum conversion films and trace content of La element in modified zinc powder can be controlled by varying the ultrasonic power. Furthermore, the superior performance of zinc electrode using the zinc powder coated with lanthanum conversion films is clearly established by low capacity loss and high cycle stability. The great improvement over the electrochemical properties of zinc electrodes should be ascribed to the physical shielding effect of lanthanum conversion layers.     

SAPO-34催化剂上反应条件对乙烯转化制丙烯的影响

系统研究了反应条件对SAPO-34上乙烯转化制丙烯的影响.结果表明,提高空速或加大He/C2H4稀释比有利于抑制丙烯二次反应的发生,提高丙烯的选择性.升高温度导致乙烯转化率下降,甲烷和乙烷的选择性增加;在相同转化率下,丙烯选择性随温度上升而下降.乙烯在SAPO-34上的转化反应表现出明显的诱导期,且反应条件对诱导期的长短有较大影响.     

Sampling effects on observed cyclopropane isomerization in a single pulse shock tube

Cyclopropane in argon mixtures was heated in a single-pulse shock tube, and syringes were used to withdraw samples from both the central gas slug and the gas adjacent to the tube walls. Differences were observed in the measured conversion, with larger conversion found in the center location. The discrepancy increased with increasing conversion, and the results indicate that boundary-layer effects can seriously affect the results of absolute single-pulse shock-tube studies when percent conversion is large.     

Nuclear spin conversion of methane in solid parahydrogen

The nuclear spin conversion of CH(4) and CD(4) isolated in solid parahydrogen was investigated by high resolution Fourier transform infrared spectroscopy. From the analysis of the temporal changes of rovibrational absorption spectra, the nuclear spin conversion rates associated with the rotational relaxation from the J=1 state to the J=0 state for both species were determined at temperatures between 1 and 6 K. The conversion rate of CD(4) was found to be 2-100 times faster than that of CH(4) in this temperature range. The faster conversion in CD(4) is attributed to the quadrupole interaction of D atoms in CD(4), while the conversion in CH(4) takes place mainly through the nuclear spin-nuclear spin interaction. The conversion rates depend on crystal temperature strongly above 3.5 K for CH(4) and above 2 K for CD(4), while the rates were almost constant below these temperatures. The temperature dependence indicates that the one-phonon process is dominant at low temperatures, while two-phonon processes become important at higher temperatures as a cause of the nuclear spin conversion.     

Reversible solid-state structural conversion between a three-dimensional network and a one-dimensional chain of Cu(II) triazole coordination polymers in acidic/basic-suspensions or vapors

New Cu(II) triazole coordination polymers with a 3D network were synthesized and reversible structural conversion between a 3D network and a 1D chain with color change was realized by pH controlled acidic and basic-suspensions or vapors. For each conversion process of decreasing and increasing pH, conversion was accomplished with high yield, in which the crystal before conversion played the role of a solid-state crystal template.     

Nuclear spin conversion of molecular hydrogen on amorphous solid water in the presence of O2 traces

Nuclear spin conversion (NSC) of ortho- to para-H(2) and para- to ortho-D(2) has been investigated on an amorphous solid water (ASW) surface at 10 K, in the presence of co-adsorbed O(2). The dynamics of the nuclear spin conversion could be revealed by combination of resonance enhanced multiphoton ionization spectroscopy (REMPI) with temperature programmed desorption (TPD) experiments. The conversion rates are consistent with a diffusion of molecular hydrogen inducing a nuclear spin conversion enhanced in the vicinity of molecular oxygen. The conversion times were found to increase with decreasing O(2) and H(2) coverage. Finally, on oxygen free ASW surface, the extremely long conversion characteristic times measured showed that such surface is not an efficient catalyst for NSC, in contradiction with hypothesis commonly made for interstellar medium.     

Microstructural characteristics of Ce conversion coatings on Cf/Al composite or Ni?P plated Cf/Al composite

The microstructural characteristics of Ce conversion coatings on carbon fiber reinforced Al matrix (Cf/Al) composites and Ce conversion coatings on Ni? P plated Cf/Al composites were studied by SEM, AFM, TEM and XPS. The Ce conversion coating on the Ni? P plated composite does not have obvious microcracks, which can be found easily in Ce conversion coatings. The Ce conversion coating on Ni? P plated composite has a lower surface roughness profile arithmetic mean deviation (R_a) than Ce conversion coating, as seen by AFM. Because of the inhomogeneity of the material surface and the different levels of deposition of Ce conversion coatings at the different sites, nonhomogeneous sites would promote microcrack formation of the Ce conversion coatings. The Cf/Al composite surface has lessuniformity than Ni? P plated composite, leading to more prominent microcracks. Selected area electron diffraction (SAED) patterns of Ce conversion coating could not be indexed nor matched closely to any of the oxides (Ce₂O₃, Ce₇O₁₂, Ce₆O₁₁) or hydroxides (Ce(OH)₃) that are listed in the Powder Diffraction File maintained by Diffraction Data, but for Ce conversion coating on the Ni? P plated composite the data matched closely with that of CeO₂ or Ce₆O₁₁. The XPS results showed that the Ce conversion coating mainly contained both Ce³⁺ and Ce⁴⁺ species, but Ce⁴⁺ species were the dominant oxidation state on Ni? P coating with Ce conversion deposition. Copyright © 2008 John Wiley & Sons, Ltd.     

乌头类双酯型生物碱组分转化为单酯水解型及脂型生物碱组分的研究

建立了乌头类双酯型生物碱组分专一的转化为单酯水解型生物碱组分和脂型生物碱组分的方法,其转化率在90%以上,应用电喷雾多级串联质谱方法监测反应进程并对反应产物进行鉴定,同时可以考察反应中生成的副产物.     

Estimation of the curing rate of acrylamide used as a consolidant in heritage sandstone conservation

An investigation of the curing (polymerisation) rate of acrylamide was carried out using isothermal and non-isothermal DSC in order to estimate the time for complete conversion of monomer at ambient temperatures. The non-isothermal data were used to model the rate using integral isoconversional and incremental isoconversional kinetic methods. Applying the equations for integral isoconversional methods and extrapolating to ambient temperatures resulted in non-sensical conversion–time curves, where the time estimated decreased for increasing degree of conversion to be reached. This odd behaviour was attributed to the incorrectness of the integration where the kinetic parameters (e.g. the activation energy) are a function of conversion. The problem was addressed by applying incremental methods which provided more reasonable results as the integration is carried out over small conversion increments where the kinetic parameters are assumed to be constant. Estimates of the conversion were compared to isothermal measurements and, although isothermal DSC produced significant variability in the data, extrapolated estimates from non-isothermal kinetic analysis produced, at best, an upper boundary for the estimation of the time to reach a fixed degree of conversion.     

Direct evidence of morphological changes in conversion type electrodes in Li-ion battery by acoustic emission

The charge and discharge of a Li-ion battery based on conversion type electrode material are investigated operando by acoustic emission (AE). The AE technique gives a direct evidence of both structural and morphological impacts of the electrochemical conversion reaction on the electrode. During the first discharge a huge AE energy is measured not only during the biphasic conversion process, but also during the SEI reaction. On first charge, the cumulated AE energy (CAEE) shows a significant increase, during the back conversion process, while upon further cycling the CAEE fluctuation is smoothed out, but very much reproducible. This demonstrates that a conversion reaction creates an “earthquake” in the electrode during conversion, which is correlated to a strong polarization of the electrochemical curve in the first discharge. More importantly, this study demonstrates that AE is a powerful tool to survey the real-time morphological changes and to discriminate the nature of electrochemical process in the electrode.