Kinetics of polymerization of N-tert-butylacrylamide. Part II

The effect of ferric chloride on the kinetics of the radical polymerization of N-tert-butylacrylamide has been investigated in methanol solution at 25°C, with the use of 4,4′-dicyano-4,4′-azodipentanoic acid as initiator. A shrinkage factor of 0.193 mmole polymerized for 1 mm contraction in a capillary of 1 mm diameter has been obtained from density measurements. In the absence of ferric chloride, rates of polymerization were found to be proportional to the concentration of monomer and to the square root of the initiator concentration. With ferric chloride present, the rate of polymerization becomes directly proportional to the initiator concentration and inversely proportional to the concentration of ferric salt. From measurements of the rates of production of ferrous iron, the specific rate constant of the initiation reaction has been found to be (1.8 ± 0.4) × 10^?6sec^?1 at 25°C, compared with a value of 7.63 × 10^?8 sec^?1 calculated from the kinetic data obtained with no ferric salt present. The value of the ratio k_p/k₄. where k_p is the propagation coefficient and k₄ is the velocity coefficient for termination by ferric chloride, has been calculated to be 6.0 × 10^?4 at 25°C, which is considerably smaller than the value found for the ferric chloride-terminated polymerization of acrylamide in water. This markedly lower value of k_p/k₄ has been attributed principally to the steric effect of the tert-butyl group on the magnitude of k_p.     

Synthesis and nonlinear optical properties of polyester containing 4‐di‐(2′‐hydroxyethoxy)‐4‐diphenyl‐hydrazonomethyl chromophore

The nonlinear optical property of new polyester has been studied via second harmonic generation (SHG). The values of electro‐optic coefficients, d₃₃ and d₃₁, of the poled polymer film were 3.15 × 10 ^?7 and 1.5 × 10^?7 esu, respectively. Thermal behavior of this polyester was studied through thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). 4‐di‐(2′‐hydroxyethoxy)‐4‐diphenyl‐hydrazonomethyl was synthesized from the reaction of 3,4‐dihydroxy‐4‐diphenyl‐hydrazonomethyl with 2–chloro–1‐ethanol in a 1:2 mole ratio and subsequently reacted with terephthaloyl chloride (TPC) in the presence of pyridine, as catalyst, to produce the new nonlinear polyester. The chemical structures of the resulting monomers and polymer were characterized by CHN analysis, ¹H‐NMR, FT‐IR, and UV–Vis spectroscopy. Copyright © 2009 John Wiley & Sons, Ltd.     

Aqueous polymerization of acrylamide initiated by acidic potassium permanganate–ascorbic acid redox system

The polymerization of acrylamide initiated by the acidic permanganate–ascorbic acid redox pair has been studied in aqueous media at 30 ± 0.2°C in nitrogen atmosphere. The initial rate of polymerization has been found to be proportional to nearly the first power of the catalyst KMnO₄ concentration within the range 6.0 × 10^?3–14.0 × 10^?3 mole/l. The rate is proportional to the first power of the monomer concentration within the range 4.00 × 10^?2–12.0 × 10^?2 mole/l. However, the rate of polymerization is independent of ascorbic acid concentration within the range 3.0 × 10^?3–6.0 × 10^?3 mole/l., but the further increase of the concentration depresses the rate of polymerization as well as maximum conversion. The initial rate increases but the maximum conversion decreases as the temperature is increased within the range 20–35°C. The overall energy of activation has been found to be 9.8 kcal/mole. The optimum amount of sulfuric acid is essential to initiate the polymerization but its presence in excess produces no effect either on the rate of reaction or the maximum conversion. Water-miscible organic solvents and salts, e.g., CH₃OH, C₂H₅OH, (CH₃)₂CHOH, KCl, and Na₂SO₄, depress the rate. Slight amounts of MnSO₄ · H₂O and a complexing agent NaF increase the rate of polymerization. Cationic and anionic detergents have been found to decrease and increase the rate, respectively, while nonionic surfactants have no effect on the rate of polymerization.     

Trityl salt—initiated polymerization of α-methylstyrene

The initiation reaction of the polymerization of α-methylstyrene by trityl tetrachloroferate and tritylhexachloroantimonate in 1,2-dichloroethane at 20°C was studied. The rate constants were 14 × 10^?3 and 27 × 10^?3 L mol^?1s^?1, respectively. The dissociation constants of tritylterachloroferate (K_d = 0.88 × 10^?4M^?1) and tritylhexachloroantimonate (K_d = 2.64 × 10^?4M^?1) was determined. The effect of electron acceptors and donors on the dissociation equilibrium and initiation rate was investigated. It was shown that in strongly dissociated ion pairs such as stable carbenium salts the electron donors and acceptors have no appreciable effect on the magnitude of the dissociation. The temperature dependence of the rate constants in the ?20–+20°C range yielded the following thermodynamic parameters for trityltetrachloroferate: E_i = 8.54 kcal/mol; A = 3.2 × 10⁴ mol^?1s^?1; ΔH* = 8 kcal/mol; and S* = ?39.8 eu.     

Cerium (IV)-2-chloroethanol redox-pair initiated polymerization of acrylamide in aqueous medium

The kinetics of acrylamide polymerization has been investigated by employing cericammoniumnitrate-2-chloroethanol redox pair under nitrogen atmosphere at 30 ± 1°C. The rate of monomer disappearance is directly proportional to the concentration of 2-chloroethanol (1.0 × 10^?2 ? 10.0 × 10^?2 mol. dm^?3) and is inversely proportional to the ceric ion concentration (2.5 × 10^?3 ? 10.0 × 10^?3 mol. dm^?3) but shows square dependence to the concentration of monomer (5.0 × 10^?2 ? 25.0 × 10^?2 mol. dm^?3). The rate of ceric ion disappearance is directly proportional to the initial concentration of ceric ion and 2-chloroethanol but independent of acrylamide concentration. The viscometric average molecular weight (M _v) decreases on increasing the concentration of ceric ion and increases on increasing the concentrations of acrylamide and 2-chloroethanol. A tentative mechanism has been proposed.     

Crowned polyacetylene. I. Synthesis and characterization of poly(4′-ethynylbenzo-15-crown-5)

4′-Ethynylbenzo-15-crown-5 ( EB15C5 ) polymerized with high yields in the presence of (bicyclo[2.2.1] hepta-2,5-diene) rhodium(I) chloride dimer and triethylamine as a cocatalyst in chloroform at 30°C. Common catalysts for the polymerization of substituted acetylenes, WCl₆ and MoCl₅, did not produce any polymer from EB15C5 . The structure of the main chain for poly(4′-ethynylbenzo-15-crown-5) ( PEB15C5 ) was determined to be predomi-nantly cis form, based upon the relatively sharp signals attributed to the main chain atoms that was observed in the ¹H and ¹³C NMR spectra. The cation-binding properties of PEB15C5 are very similar to that of poly(4′-vinylbenzo-15-crown-5), and the selectivity is in the order of K⁺> Rb⁺ ? Cs⁺ ? Na⁺, Li⁺. The electrical conductivity of PEB15C5 increased from 1.3 × 10^?10 to 1.3 × 10^?6 S. cm^?1, when the polymer was doped with iodine. © 1995 John Wiley & Sons, Inc.     

Vinyl polymerization of acrylamide initiated by Thallium(III) ions in solution

Kinetics of polymerization of acrylamide initiated by Thallium(III) perchlorate was investigated in aqueous perchloric acid medium in the temperature range of 55–70°C. The rates of polymerization were measured varying the concentration of the monomer, initiator, and perchloric acid. The rate of polymerization was found to increase with increase of temperature, monomer concentration, initiator concentration, and perchloric acid concentration. The effect of additives like different solvents, surfactants, and retarders on the rate of polymerization was studied. Molecular weights of the polymer were determined by viscometry. The chain transfer constants for the monomer (C_M) and that for the solvent dioxan (C_s) were calculated to be 7.33 × 10^?3 and 6.66 × 10^?3, respectively. From the Arrhenius plot, the overall activation energy (E_a) was calculated to be 10.68 kcal/mol. The energy of initiation was calculated to be 12.36 kcal/mol. Depending on the results obtained, a suitable reaction mechanism has been suggested and a rate equation has been derived.     

Effects of iron(III) chloro complexes on the polymerization of styrene

The polymerization of styrene initiated by 2,2′-azobisisobutyronitrile has been studied in N,N-dimethylformamide solution at 60°C in the presence of hexakis(N,N-dimethylformamide) iron(III) tetrafluoroborate alone, and also in the presence of added lithium chloride. The presence of Fe(DMF)₆³⁺ ions in the polymerizing systems caused retardation, but iron(III) chloro complexes produced well defined inhibition periods. Velocity constants at 60°C for polystyryl radicals towards Fe(DMF)₆³⁺, Fe(DMF)₅Cl²⁺, Fe(DMF)₄Cl₂⁺, and FeCl₄^? ions were calculated to be 847, 4.15 × 10⁴, 6.55 × 10⁴, and 3.14 × 10⁴ l./mole-sec, respectively. Values of the initiator efficiency f for most systems investigated ranged from 0.59 to 0.62.     

Aqueous polymerization of acrylamide initiated by cerium (IV)–ethylenediamine tetraacetic acid redox system

Ethylenediamine tetraacetic acid (EDTA) terminated polyacrylamide was obtained by using the EDTA–cerium(IV) ammonium nitrate [Ce(IV)] redox initiator in the aqueous polymerization of acrylamide. The polymerization behaviors as a function of the concentration of Ce(IV), EDTA, and acrylamide as well as temperature were studied. The consumption rate of cerium(IV) depends a first-order reaction on the ceric ion concentration ([Ce(IV)]). The complex formation constant (K) and disproportionation constant (k_d) of Ce(IV)–EDTA chelated complex are 1.67 × 10⁴ and 3.77 × 10^?3, respectively. The rate dependences of polymerization on monomer concentration and EDTA concentration both follow a second-order reaction in the run of initial monomer concentration ([M]_i) equal to 0.2 mol dm^?3. The number average molecular weight increases linearly with the ratio of [M]_i/[Ce(IV)]_i. The mechanism and kinetics for the polymerization was proposed. The kinetic parameters involved were determined. © 1992 John Wiley & Sons, Inc.     

Lower photoreactivity of 3-methyl-3-(4′-biphenylyl)-t-butene

Direct and sensitized photolyses of 3-methyl-3-(4′-biphenylyl)-1-butene gave 1,1-dimethyl-2-(4′-biphenylyl)cyclopropane as primary product and 2-methyl-4-(4′-biphenylyl)-1-butene as secondary product with quantum yields of 7.6×10^?3 and 5.6×10^?3, respectively. On direct photolysis, the triplet reactant rearranged with a quantum yield of 4.4×10^?3 and is more reactive than the singlet. The exceptionally low photoreactivity shows that the excitation energy is largely localized on the biphenylyl portion but can be delivered to the reaction center slowly.     

Polymerization of acrylamide with persulfate–thiomalic acid initiator

The redox system of potassium persulfate–thiomalic acid (I₁–I₂) was used to initiate the polymerization of acrylamide (M) in aqueous medium. For 20–30% conversion the rate equation is where R_p is the rate of polymerization. Activation energy is 8.34 kcal deg^?1 mole^?1 in the investigated range of temperature 25–45°C. M_n is directly proportional to [M] and inversely to [I₁]. The range of concentrations for which these observations hold at 35°C and pH 4.2 are [I₁] = (1.0–3.0) × 10^?3, [I₂] = (3.0–7.5) × 10^?3, and [M] = 5.0 × 10^?2–3.0 × 10^?1 mole/liter.     

Kinetics and mechanism of oxidation of glycine,alanine, and threonine by fluoride coordinated bismuth(V) in aqueous HClO4–HF medium

The kinetics of oxidation of amino acids viz. glycine, alanine, and threonine with bismuth(V) in HClO₄–HF medium have been studied. The kinetics of the oxidation of all these amino acids exhibit similar rate laws. The second-order rate constants were calculated to be 2.04 × 10^?2 dm³ mol^?1 and 2.72 × 10^?2 dm³ mol^?1 s^?1 for glycine and alanine, respectively, at 35°C and 5.9 × 10^?2 dm³ mol^?1 s^?1 for threonine at 25°C. All the possible reactive species of both bismuth(V) and amino acids have been discussed and a most probable kinetic model in each reaction has been envisaged. © 1994 John Wiley & Sons, Inc.     

Polymerization of Acrylamide with Permanganate/Mercaptosuccinic Acid Initiator System

The aqueous polymerization of acrylamide initiated by the acidified potassium permanganate/mercaptosuccinic acid redox system was studied at 35 ± 0.2°C in nitrogen. In the studied range of activator concentration (2.0 × 10^?3 to 6.25 ± 10^?3 mole/liter) the polymerization rate remains unaffected. The initial rate of polymerization varies linearly with KMnO₄ and acrylamide concentrations in the studied range. The activation energy was found to be 6.61 kcal/mole (27.63 kJ/mole) in the temperature range of 30–50°C. The molecular weight of polyacrylamide was found to be independent of [KMnO₄] but increased with increasing monomer concentration. The effect of DMF on polymerization rate and molecular weight was also investigated.     

Alkylaluminum activator effects on polyethylene branching using a N,N′‐nickel precatalyst appended with bulky 4,4′‐dimethoxybenzhydryl groups

Ten unsymmetrical N,N'‐bis (imino) acenaphthene‐nickel (II) halide complexes, [1‐[2,6‐{(4‐MeOC₆H₄)₂CH}₂–4‐MeC₆H₂N]‐2‐(ArN)C₂C₁₀H₆]NiX₂, each appended with one N‐2,6‐bis(4,4'‐dimethoxybenzhydryl)‐4‐methylphenyl group, have been synthesized and characterized. The molecular structures of Ni1 , Ni3 , Ni5 and Ni6 highlight the variation in steric protection afforded by the inequivalent N‐aryl groups; a distorted tetrahedral geometry is conferred about each nickel center. On activation with diethylaluminum chloride (Et₂AlCl) or methylaluminoxane (MAO), all complexes showed high activity at 30°C for the polymerization of ethylene with the least bulky bromide precatalysts ( Ni1 and Ni4 ), generally the most productive, forming polyethylenes with narrow dispersities [M_w/M_n: < 3.4 (Et₂AlCl), < 4.1 (MAO)] and various levels of branching. Significantly, this level of branching can be influenced by the type of co‐catalyst employed, with Et₂AlCl having a predilection towards polymers displaying significantly higher branching contents than with MAO [T_m: 33.0–82.5°C (Et₂AlCl) vs. 117.9–119.4°C (MAO)]. On the other hand, the molecular weights of the materials obtained with each co‐catalyst were high and, in some cases, entering the ultra‐high molecular weight range [M_w range: 6.8–12.2 × 10⁵ g mol^?1 (Et₂AlCl), 7.2–10.9 × 10⁵ g mol^?1 (MAO)]. Furthermore, good tensile strength (ε_b up to 553.5%) and elastic recovery (up to 84%) have been displayed by selected more branched polymers highlighting their elastomeric properties.     

Free‐radical copolymerization of styrene and m‐isopropenyl‐α,α′‐dimethylbenzyl isocyanate studied by 1H NMR kinetic experiments

The free‐radical copolymerization of m‐isopropenyl‐α,α′‐dimethylbenzyl isocyanate (TMI) and styrene was studied with ¹H NMR kinetic experiments at 70 °C. Monomer conversion vs time data were used to determine the ratio k_p × k_t^?0.5 for various comonomer mixture compositions (where k_p is the propagation rate coefficient and k_t is the termination rate coefficient). The ratio k_p × k_t^?0.5 varied from 25.9 × 10^?3 L^0.5 mol^?0.5 s^?0.5 for pure styrene to 2.03 × 10^?3 L^0.5 mol^?0.5 s^?0.5 for 73 mol % TMI, indicating a significant decrease in the rate of polymerization with increasing TMI content in the reaction mixture. Traces of the individual monomer conversion versus time were used to map out the comonomer mixture composition drift up to overall monomer conversions of 35%. Within this conversion range, a slight but significant depletion of styrene in the monomer feed was observed. This depletion became more pronounced at higher levels of TMI in the initial comonomer mixture. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1064–1074, 2002     

Organocobalt chelates as initiators of emulsion polymerization of styrene

The kinetics of decomposition of organocobalt chelates in the pH range of 2.2–7.0 has been studied. It has been shown that the rate constant of decomposition of the octyl chelate complex at 20°C changes from ～3 × 10^?3 to ～6 × 10^?6 s^?1 in the above pH range. The rate constants of decomposition of complexes with ethyl, octyl, and cetyl ligands, as estimated at 20°C and pH 8.3, are 1.69 × 10^?4, 1.39 × 10^?4, and 2.42 × 10^?5 s^?1, respectively. As evidenced by emission spectrometry measurements, ～100% of organocobalt chelates with ethyl and isopropyl ligands occur in the aqueous phase, while organocobalt chelates with octyl and cetyl ligands are partitioned between monomer and aqueous phases. The rates of initiation of the emulsion polymerization of styrene have been measured by the inhibited polymerization procedure. It has been demonstrated that among three tested compounds (diphenyl picryl hydrazyl, hydroquinone, and benzoquinone), benzoquinone has been found to be a suitable inhibitor for the polymerization under study. The rates of initiation of styrene polymerization at 30°C for organocobalts with ethyl, octyl, and cyclohexyl ligands are 1.0 × 10^?7, 1.04 × 10^?7, and 3.7 × 10^?6 mol/(l s), respectively. The rate constant of decomposition of the organocobalt complex with the octyl ligand at 30°C is 2.28 × 10^?5 s^?1, and the efficiency of initiation with this complex is 0.95.     

Aqueous polymerization of acrylamide

The polymerization of acrylamide (I) initiated by a potassium bromate—thioglycollic acid (TGA) redox pair has been studied in aqueous media at 30°C in a nitrogen atmosphere. The reaction order related to the catalyst concentration (KBrO₃) was 0.501, which indicated a bimolecular mechanism for the termination reaction in the range of 1.0?3.0 × 10^?3 mole/liter. The polymerization rate varied linearly with monomer (I) concentration over the range of 1.0?5.0 × 10^?2 mole/liter. A typical behavior is observed, however, by changing the thioglycollic acid concentration. The initial rate of polymerization (Ri), as well as the maximum conversion, increases by increasing the temperature to 30°C, but the initial rate and the maximum conversion falls as the temperature rises above 30°C. The overall energy of activation is 6.218 kcal in the temperature range of 20–40°C. Water-miscible organic solvents, namely, CH₃OH and C₂H₅OH, depress the rate of polymerization.     

Aqueous polymerization of acrylonitrile by ascorbic acid–peroxodisulfate redox system

The polymerization of acrylonitrile initiated by an ascorbic acid–peroxodisulfate redox system was studied in an aqueous solution at 35°C in the presence of air. Molecular oxygen was found to have no effect on the polymerization reaction. An increase in ionic strength slightly increased the rate. The overall rate of polymerization, R_p, showed a square dependence on [monomer] and a half-order dependence on [peroxodisulfate]. A first-order dependence on [ascorbic acid] at low concentrations (<3.0 × 10^?3 mol L^?1) followed by a decrease in R_p at higher concentrations of ascorbic acid (>3.0 × 10^?3 mol L^?1) was also noted. R_p remained unchanged up to 40°C and showed a decline thereafter. Addition of catalytic amounts of cupric ions decreased the rate whereas ferric ions were found to increase the rate. Added sulfuric acid in the range (6.0?50.0) × 10^?5 mol L^?1 decreased the R_p.     

Polymerization of acrylamide initiated by the Ce4+/thiourea redox system

The polymerization of acrylamide (M) initiated by the Ce⁴⁺/thiourea (TU) redox system has been studied in an aqueous sulfuric acid medium at 35 ± 0.2°C under nitrogen atmosphere. The rate of polymerization is governed by the expression The activation energy is 5.9 kcal deg^?1 mol^?1 in the investigated temperature range 30–50°C. The molecular weight is directly proportional to the concentration of monomer and inversely proportional to the catalyst concentration. With increasing concentration of DMF molecular weight decreases. The range of concentrations for which these observations hold at sulfuric acid concentration of 2.5 × 10^?2 mol/L are [monomer] = 5.0 × 10^?2–3.0 × 10^?1, [catalyst] = (5.0–15.0) × 10^?4, and [activator] = (1.0–6.0) × 10^?3 mol/L.     

Radical‐initiated polymerization of β‐methyl‐α‐methylene‐γ‐butyrolactone

β‐Methyl‐α‐methylene‐γ‐butyrolactone (MMBL) was synthesized and then was polymerized in an N,N‐dimethylformamide (DMF) solution with 2,2‐azobisisobutyronitrile (AIBN) initiation. The homopolymer of MMBL was soluble in DMF and acetonitrile. MMBL was homopolymerized without competing depolymerization from 50 to 70 °C. The rate of polymerization (R_p) for MMBL followed the kinetic expression R_p = [AIBN]^0.54[MMBL]^1.04. The overall activation energy was calculated to be 86.9 kJ/mol, k_p/k_t^1/2 was equal to 0.050 (where k_p is the rate constant for propagation and k_t is the rate constant for termination), and the rate of initiation was 2.17 × 10^?8 mol L^?1 s^?1. The free energy of activation, the activation enthalpy, and the activation entropy were 106.0, 84.1, and 0.0658 kJ mol^?1, respectively, for homopolymerization. The initiation efficiency was approximately 1. Styrene and MMBL were copolymerized in DMF solutions at 60 °C with AIBN as the initiator. The reactivity ratios (r₁ = 0.22 and r₂ = 0.73) for this copolymerization were calculated with the Kelen–Tudos method. The general reactivity parameter Q and the polarity parameter e for MMBL were calculated to be 1.54 and 0.55, respectively. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1759–1777, 2003