Electroluminescence and Spectral Properties of N9‐Isobutyl‐2‐Oxo‐3‐Phenyl‐3N‐Benzo[F]Chromene‐9‐Sulfonamide

Experimental data on the synthesis and spectral properties (UV, IRFourier, xray photoelectronic, and luminescence spectra) of the sulfonamide derivative of benzocoumarin in an isopropanol solution and in a film applied by thermal vacuum deposition (TVD film) are reported. The use of TVD films of the investigated substance as electroluminophors is shown to be promising.     

Spectral‐Luminescence and Generation Properties of 1‐Aza‐2‐Methyl‐6‐Aminopyrene and of Its Protolytic Forms

Spectral manifestations of protolytic forms of 1aza2methyl6aminopyrene in ethanol and aqueous solutions are investigated. The ionization constants of the protolytic forms are determined. The generation properties and photostability of a neutral molecule and a cation in excitation by an excimer XeCl laser are studied.     

Structural Assignment of Isomeric S‐ and S,N‐1‐Alkoxycarbonylalkylated 6‐Amino‐2‐thiouracil Derivatives by Means of 1H and 13C NMR Spectroscopy

Abstract

The structures of new isomeric 2‐alkoxycarbonylalkylthio‐ and 2‐alkoxy‐ carbonylalkylthio‐1‐alkoxycarbonylalkyl‐6‐aminouracils (1–21) have been established on the basis of the ¹H NMR and ¹³C NMR spectroscopic data. The ¹H NMR and ¹³C NMR spectra of 1–21 have been fully assigned by a combination of two‐dimensional experiments [heteronuclear multiple quantum coherence (HMQC) and heteronuclear multiple bond correlation (HMBC)]. The ¹³C NMR spectra have been shown to be able to differentiate between isomers.     

Influence of Thermal Treatment on the Thermal Behavior of Poly‐L‐lactide

The influences of thermal treatment on cold crystallization and the thermal behavior of poly‐L‐lactide (PLLA) were investigated by DSC and polarizing microscopy. Both the cooling and heating rates had effects on cold crystallization. Double peaks were observed for the samples on subsequently heating at 10°C min^?1 after cooling between 5 and 20°C min^?1. The degrees of crystallinity dramatically increased with decreasing cooling rate, and the size of PLLA spherulites increased with a decrease in the cooling rate. Double cold crystallization peaks were also observed during heating traces at higher rates for this material after fast cooling (20°C min^?1) from the melt. The competition between the crystallization from the nuclei formed during cooling, and that from spontaneous nucleation might be responsible for the appearance of double peaks.     

Thermal and Tribological Properties of Fullerene‐Containing Composite Systems. Part 3. Features of the Mechanism of Thermal Degradation of Poly‐(N‐Vinyl‐Pyrrolidone) and Its Compositions with Fullerene C60

By mass‐spectrometric thermal analysis (MTA) the thermochemical features of poly(N‐vinyl pyrrolidone) (PVP) and its compositions with fullerene C₆₀ were studied. The mechanism of PVP thermal degradation was investigated; in particular the nature of the low‐temperature degradation (between 75 and 300°C) accompanied by output of pyrrolidone was explained as well as the influence of fullerene C₆₀ on this mechanism. It was shown that during thermal degradation of copolymer PVP‐C₆₀, there is a disappearance of the low‐temperature peaks of the output of pyrrolidone that is interpreted as an increase of the thermal stability of N‐vinyl‐pyrrolidone fragments in this product in comparison with their thermal stability in pure PVP.     

Infrared Spectroscopic Study of N,N‐Dimethylthioformamide Complexes of the Hofmann Type

Four new Hofmanntype complexes, M(DMTF)₂Ni(CN)₄, (where DMTF is dimethylthioformamide, M=Mn, Cd, Co, or Ni) were synthesized and their structure was determined by an elemental analysis and infrared spectroscopy. The IR spectra of DMTF and its nickel tetracyanine complexes with Mn(II), Cd(II), Co(II), and Ni(II) have been investigated within the range 4000–400 cm^–1. The frequency shifts in the metal complexes agree with the assignment of the CS and CN frequencies. The complexes consist of infinite planar polymer layers of |MNi(CN)₄|. Ndimethylthioformamide is coordinated to this layer from above and below; it is a monodentate ligand and is Sbonded through the metal atom in these complexes.     

NMR Studies of Hindered Rotation and Magnetic Anisotropy: The Diels–Alder Adducts of Phencyclone with N‐Phenylmaleimide and N‐(2‐Trifluoromethylphenyl)maleimide. Ab Initio Calculations for Optimized Structures

Abstract

N‐Phenylmaleimide, 2, and N‐(2‐trifluoromethylphenyl)maleimide, 3, were separately added to phencyclone, 1, to yield the corresponding phencyclone Diels–Alder adducts, 4 and 5. The resulting adducts (and some precursors) have been characterized by one‐ and two‐dimensional ¹H and ¹³C NMR at 300 and 75 MHz, and by ¹⁹F NMR at 282 MHz, at ambient temperatures. The NMR data are consistent, for both adducts, with: (a) hindered rotation of the bridgehead unsubstituted phenyl groups about the C(sp²)–C(sp³) bonds, based on slow exchange limit (SEL) spectra and (b) endo adduct configuration based on magnetic anisotropic effects in the ¹H NMR. The NMR spectra of the phencyclone adduct, 4, of N‐phenylmaleimide, indicate free rotation on the NMR timescales (fast exchange limit, FEL spectra) about the N‐phenyl bond. The spectra for the adduct, 5, of N‐(2‐trifluoromethylphenyl)maleimide are interpreted as consistent with SEL regimes, for the N‐aryl rotations, with a single rotamer present in which the trifluoromethyl group is directed “out of” the adduct cavity, and away from the phenanthrenoid moiety. This conclusion is based, in part, on NMR data suggesting the apparent slow N‐aryl bond rotation in a pair of atropisomers corresponding to the acetic acid addition products from the N‐(2‐trifluoromethylphenyl)maleimide. Evidence of magnetic anisotropic effects due to the phenanthrenoid moiety and proximal carbonyls is discussed. ¹H, ¹³C, and ¹⁹F assignments are presented and interpreted. Molecular modeling calculations at the Hartree–Fock level, 6‐31G* basis set, were performed to provide geometry optimizations for energy‐minimized structures of selected compounds.     

Steady‐State and Time‐Resolved Emission Studies of 6‐Methoxy Quinoline

Abstract

Steady‐state absorption, fluorescence excitation, and emission spectra of 6‐methoxy quinoline (6‐MQ) were measured at room temperature in cyclohexane, dioxane, ethanol, acetonitrile, water, and water–dioxane solvents. Absorption spectra of cyclohexane, n‐hexane, and isopentane solutions show resolved vibronic structure at room temperature. However, the excitation spectrum of cyclohexane solution is structureless and is found to be emission wavelength dependent, indicating the formation of at least two distinct species in the ground state. Similar behavior was observed in dioxane and water–dioxane solutions. For all other solutions, the fluorescence excitation spectrum of 6‐MQ was found to be the same for different emissions. Emission of 6‐MQ in all solvents consisted of two bands with their maxima around 355 nm (I) and 430 nm (II), the actual positions and the relative intensities being dependent on the solvent used. The bands I and II were respectively attributed to normal and protonated/H‐bonded species of either ¹L_a or ¹L_b states or mixed (¹L_a/¹L_b) state of ππ* character. Fluorescence decay of this dye in all solvents monitored over each emission maximum showed biexponential behavior, and the analysis yielded two different lifetime components for each emission band. The short and long fluorescence decay components were respectively in the range of 0.30–3.00 ns and 18–20 ns. The observed emission characteristics coupled with the nature of the fluorescence polarization spectra and two different decay components for each emission suggest the existence of two different conformers having two different excited electronic states.     

Proton and Carbon‐13 NMR Studies of the Phencyclone Adducts of Medium Alkyl Chain‐Length N‐n‐Alkylmaleimides. Hindered Rotations and Magnetic Anisotropic Effects. Ab initio Calculations for Optimized Structures

Abstract

The Diels–Alder adducts, 3a–e, of phencyclone, 1, have been prepared from a series of N‐n‐alkylmaleimides, 2, with medium chain‐length n‐alkyl groups. The maleimides were obtained by cyclodehydration of the N‐n‐alkylmaleamic acids, 4, formed from reaction of maleic anhydride with the corresponding n‐alkylamines. The five adducts prepared included derivatives from n‐heptyl, 3a; n‐octyl, 3b; n‐nonyl, 3c; n‐decyl, 3d; and n‐dodecyl, 3e. The NMR spectra of the adducts were studied in CDCl₃ at ambient temperatures at 300 MHz for proton and 75 MHz for carbon‐13, with full proton assignments achieved by high‐resolution COSY45 spectra for the aryl and the alkyl regions. Slow exchange limit (SEL) spectra were observed for both ¹H and ¹³C spectra showing slow rotation on the NMR timescales of the unsubstituted bridgehead phenyl groups. Endo Diels–Alder adduct stereochemistry was supported by striking magnetic anisotropic shielding effects in the ¹H spectra of the alkyl groups, with the NCH₂ CH ₂ signal of each adduct appearing upfield of tetramethylsilane (TMS) at ca. ?0.32 ppm. Proton NMR spectra for precursor maleamic acids and maleimides are reported, with some solvent effects found (CDCl₃ vs. d ₆‐acetone) for the carbon‐bound HC?CH protons of 4. Ab initio molecular modeling calculations at the Hartree‐Fock level using the 6‐31G* basis set have been performed for two key conformers of the phencyclone adduct of N‐n‐octylmaleimide, as a representative structure for these hindered adducts, to estimate geometric parameters for the adduct. A syn conformer, with the alkyl chain directed into the adduct cavity, was found to be ca. 0.23 kcal/mol lower energy than an anti conformer (in which the alkyl chain was directed away from the phenanthrenoid moiety).     

Effect of Non‐Ideal Mixed Solvents on Dimensions of Poly(N‐Vinylpyrrolidone) and Poly(Methyl Methacrylate) Coils

An addition of a small amount of non‐solvent tetrahydrofuran (THF) to good solvent water gave rise to a strong solvent power for poly(N‐vinylpyrrolidone) (PVP). It was found that PVP coils in mixtures of water and THF first swelled as the fraction of THF was increased, and then the coils contracted after a critical composition of the solvent mixture based on the measurement of dilute solution viscosities. It was reached that the power of the mixed solvents was not the simple average of the power of individual components. The influence of the non‐ideal mixing of water and THF on the power of these mixtures for PVP and the dimensions of PVP coils was taken into account. Especially the formation of pseudo‐clathrate hydrate structure with the composition φ _THF ≈ 0.44 was found to be an important factor to change the solvation and dimensions of PVP coils. Some other solvent mixtures for PVP and poly(methyl methacrylate) (PMMA) were also found to be non‐ideal mixtures. The viscosities of these solvent mixtures could show positive or negative deviation from the values obtained from the addition rule. It was shown again that the influence of the non‐ideality of these solvent mixtures on the dimensions of polymer coils was great. The action of mixed solvents changed the dimension of polymer coils, not only because of excluded volume effects but also because of the different molecular interactions present in these mixed solvents.     

Structural Characterization of RF‐Sputtered a‐C:N Thin Films by Raman,IR, and X‐ray Reflectometry Spectroscopies

Abstract

Amorphous carbon nitride thin films (a‐C:N) were deposited from a carbon target, at room temperature onto silicon substrates, by reactive RF sputtering in a gas mixture of argon and nitrogen. The structural properties of these films have been studied by Raman, infrared (IR), and X‐ray reflectometry spectroscopies. Both the IR and Raman spectra of the a‐C:N films reveal the presence of C–C, C?C, C?N, and C≡N bonding types. The Raman spectra analysis shows, an increase of the C≡N triple bonds content when the concentration of nitrogen C(N₂) in the gas mixture is increased. The Raman intensities ratio between the disorder (D) and graphitic (G) bands increases with C(N₂) suggesting an increased disorder with the incorporation of nitrogen in the carbon matrix. The effect of C(N₂) on the density of a‐C:N films was also investigated by X‐ray reflectometry measurement. The increase of the nitrogen concentration C(N₂) was found to have a significant effect on the density of the films: as C(N₂) increases from 0 to 100%, the density of the a‐C:N films decreases slightly from 1.81 to 1.62 g/cm³. The low values of density of the a‐C:N films were related (i) to the absence of C–N single bonds, (ii) to the increase of disorder introduced by the incorporation of nitrogen in the carbon matrix, and (iii) to the presence of the bands around 2350 cm^?1 and 3400 cm^?1 associated with the C–O bond stretching modes and the O–H vibration, respectively, suggesting a high atmospheric contamination by oxygen and water. The presence of these bands suggests the porous character of the studied samples.     

Influence of N‐Substitution on Electron Spin Resonance (ESR) Behavior of 2‐(2‐Nitrophenyl)‐1H‐benzimidazole Derivatives

Abstract

The synthesis of 2‐(2‐nitrophenyl)‐1H‐benzimidazole (1), 1‐benzoyl‐2‐(2‐nitrophenyl)‐1H ‐benzimidazole (2), and 1‐acetyl‐2‐(2‐nitrophenyl)‐1H‐benzimidazole (3) is reported. Stable radical anions (1 ^·?, 2 ^·?, and 3 ^·?) were generated by chemical reduction in DMSO and studied by ESR spectroscopy. The interpretation of the ESR spectra was done by means of computational simulation process. Hyperfine coupling constants were assigned by comparison with related compounds, and on the basis of calculation based on SCF INDO MO method in the unrestricted Hartree–Fock scheme.     

Evaluation of the Mn Lα and Lβ Spectra of Mn Metal and of Various Mn-Oxides

The Mn Lα and Lβ spectra of Mn, MnO, Mn₃O₄, Mn₂O₃, and MnO₂ have been measured. Each Mn La spectrum has been deconvoluted into two bands, Lα_A and Lα_B, and the integrated Lα_A/Lα_B intensity ratio was found to be inversely proportional to the Mn-0 inter-atomic distance, but proportional to the oxidation number. This finding tends to indicate the likelihood of crossover transition from oxygen to manganese. The intensity ratio Lβ/Lα_B of the pure metal was found to coincide closely with the statistically predicted value of 0.5. Furthermore, for Mn-metal, as well as for the oxides, the shift of the Lα_A band from the Lα_B band was found to agree with the change in the Lβ/Lα peak intensity ratio as a function of oxidation number.     

Crystal Structures of Tetrakis‐(4‐chlorophenylthio)‐butatriene and Tetrakis‐(tert‐butylthio)‐butatriene

Tetrakis‐(4‐chlorophenylthio)‐butatriene (3a) and tetrakis‐(tert‐butylthio)‐butatriene (3b) were synthesized, and their crystal structures were determined. The compound 3a is monoclinic, space group P2₁/c, a=6.9785(8), b=8.6803(9), c=22.884(2) Å, β=93.887(6)^o, V=1383.0(3) ų, Z=2. The compound 3b is monoclinic, space group P2₁/n, a=11.0615(6), b=10.8507(4), c=11.2717(6) Å, β =116.427(2)^o, V=1211.5(1) ų, Z=4. The title compounds 3a and 3b reside on an inversion center so that only half of the molecule is crystallographically unique. Both compounds are not planar. The crystal structures of 3a and 3b have cumulated double bonds. The C7–C8–C8ⁱ and C5–C6–C6ⁱ angles that show the linearity in both structures, respectively, are 176.4(3)° in 3a and 175.6(2)° in 3b.     

Thermal Behavior of an Fe(III)‐2,9,16,23‐Tetramidephthalocyanine‐Grafted Poly(N‐Vinylcarbazole)

Abstract

The introduction of 2,9,16,23‐tetramide‐Fe(III)phthalocyanine [Fe(III)taPc] units into phosphorylated poly(N‐vinylcarbazole) yields an amorphous grafted polymer containing free carbazolyl groups, phosphonic acid attached to carbazolyl groups, and grafted Fe(III)taPc units as evidenced by infrared spectroscopy. Several thermal transitions were detected by differential scanning calorimetry (DSC). The thermodegradation of the grafted sample, analyzed by simultaneous thermogravimetry‐differential thermal analysis (TG‐DTA), showed successive endo‐ and exothermal reactions resulting from the development of a cross‐linked structure. To determine kinetic parameters, both isothermal and dynamic experiments were performed at the different steps of the degradation process and theoretical methods were applied.     

Resonant Raman Scattering Spectra of Zn‐Phthalocyanine and Zn‐Phthalocyanine‐d 16

We obtained the resonant Raman scattering spectra of Znphthalocyanine and of its fully deuterated analog, Znphthalocyanined ₁₆. We performed calculation of normal vibrations and using it, interpreted the Raman scattering spectra. We characterized the form of vibration with the aid of potential energy distribution. For the majority of vibrations the calculation adequately describes the observed isotropic shifts. The correspondence between the vibrational states of Znphthalocyanine and metal complexes of tetrabenzoporphin has been established in confirmation of the proposed detailed interpretation of the spectra.     

Synthesis and Thermal Behavior of Silica‐Graft‐Polypropylene Nanocomposites Studied by Step‐Scan DSC and TGA

Silica graft poly(propylene) (silica‐g‐PP) nanocomposites were successfully prepared by radical grafting copolymerization and ring‐opening reaction. Their thermal properties were studied by step‐scan differential scanning calorimetry (SDSC) and thermogravimetric analysis (TGA). The exothermic peaks in the IsoK baseline (C_p,IsoK, nonreversing signal) of SDSC reveal that PP and silica‐g‐PP nanocomposites undergo melting‐recrystallization‐remelting during heating. The peak temperatures of recrystallization and remelting shift upward with the existence of nanoparticles in the PP matrix. The thermal degradation kinetics of silica‐g‐PP nanocomposites were investigated using nonisothermal TGA and the Flynn‐Wall‐Ozawa method. The results indicate that the thermal stability was significantly improved with increasing silica content, mainly because of the physical‐chemical adsorption of the volatile degradation products on the nanoparticles that delays their volatilization during decomposition, and the covalent interaction between nanoparticles and PP chains, which will also reduce the breakage of PP backbone chains.     

Preparation and Properties of Epoxy‐Clay Nanocomposites

Epoxy‐clay nanocomposites were synthesized to examine the effects of adding different contents of nanoclays on the physical, mechanical, and thermal properties of the epoxy resin system used in composite pipes manufacturing. Diglycidyl ether of bisphenol‐A (epoxy) with a cycloaliphatic amine heat curing hardner was reinforced by 1–7 wt.% of an organically modified type of montmorillonite. SEM results showed the change in failure of epoxy from brittle to tough mode by addition of nanoclays. X‐ray results indicated some degree of exfoliation by 1 wt.% clay and a decrease in d‐spacing in higher clay loadings after that. The heat‐distortion temperature of epoxy-clay nanocomposites increased from 125.5 to 138.7°C with 3 wt.% organoclay loading. Tensile and flexural modulus increased with increasing clay loading in this type of nanocomposite, but addition of organically modified clay decreased the tensile and flexural strengths and tensile elongation at break. Addition of 7 wt.% nanoclay improved the impact strength by 25.6%.     

NMR Studies of Crowded Diels–Alder Adducts of Phencyclone with N‐(2,6‐Dialkylphenyl)maleimides. Hindered Rotations and Magnetic Anisotropy

Abstract

Phencyclone, 1, reacted with N‐(2,6‐dimethylphenyl)maleimide, 2a; with N‐(2,6‐diethylphenyl)maleimide, 2b; and with N‐(2,6‐diisopropylphenyl)maleimide, 2c, respectively, to yield the corresponding Diels–Alder adducts, 3a–c. The adducts were extensively characterized by NMR (7 T) at ambient temperatures using one‐ and two‐dimensional (1D and 2D) proton and carbon‐13 techniques for assignments. Slow exchange limit (SEL) spectra were observed, demonstrating slow rotations on the NMR timescales, for the unsubstituted bridgehead phenyl groups [C(sp³)–C(aryl sp²) bond rotations] and for the 2,6‐dialkylphenyl groups [N(sp²)–C(aryl sp²) bond rotations]. Substantial magnetic anisotropic shifts were seen in the adducts. For example, in the N‐(2,6‐dialkylphenyl) moieties of the adducts, one of the alkyl groups is directed “into” the adduct cavity, toward the phenanthrenoid portion, and these “inner” alkyl proton NMR signals were shifted upfield. Thus, in CDCl₃, the “inner” methyl of adduct 3a exhibits a proton resonance at ?0.13 ppm, upfield of tetramethylsilane (TMS); the “inner” ethyl group signals from 3b appear at 0.026 ppm (CH₂, quartet), and ?0.21 ppm (CH₃, triplet); and the “inner” isopropyl group from 3c is seen at ?0.06 ppm (methine, approx. septet) and ?0.39 ppm (CH₃, doublet). Proton NMR of the crude N‐(2,6‐dialkylphenyl)maleamic acids (used as precursors of the maleimides, 2a–c) exhibited two sets of AB quartet signals, suggesting possible conformers from hindered rotation in the amide groups about the HN–C?O bonds.     

Molecular and Crystalline Structure of 6,6'‐Dimethyl‐2,3,4,5,6,7‐Hexahydrobenzo[b]Furan‐3,4‐Dione

Different intermolecular compounds of 6,6'dimethyl2,3,4,5,6,7hexahydrobenzo[b]furan3,4dione have been investigated by IR spectroscopy and xray structural analysis methods. The relation between changes in the characteristic absorption bands of CH₂, CH₃, C=O, and C—O—C groups and the properties of the medium surrounding the molecule is established. Crystals of monoclinic syngony, of space group P2₁/n, are formed from a chloroformhexane mixture in crystallization. In the crystalline structure, shortened intermolecular contacts between the atoms of hydrogen of the CH₃ and CH₂ groups of cyclohexane cycles and the oxygen atom of the furan cycle, and also between the atoms of hydrogen of the CH₂ and CH₃ groups of both cycles and the oxygen of the cyclohexane cycle are revealed.