Novel polyviologens: Photochromic redox polymers with film-forming properties

Several novel polyamides containing the N,N′-dialkyl-4,4′-dipyridinium (“viologen”) system were made by interfacial condensation of N,N′-bis(aminoalkyl)-4,4,-dipyridinium salts with di-, tri-, or tetrafunctional acid chlorides. These materials are useful redox polymers which turn deeply colored when reduced chemically or electrically, or when exposed to light.     

Macroreticular redox polymers. III. Characterization of some hydroquinone–quinone redox polymers

A series of hydroquinone–quinone redox polymers on highly and lightly crosslinked macroreticular styrene–divinylbenzene matrices was characterized for redox capacity, reactivity, equilibria, and redox potential. The effects of cerium(IV), iron(III), and oxygen on determinations of redox capacity are described.     

Electron-transfer polymers. XXXVII. Preparation and redox behavior of polycarbonates with incorporated hydroquinone units

Preparation of polycarbonates from a quinonediol and phosgene, and from the quinonediol and various bischloroformates, is described. Some of the bischloroformates were prepared from poly(ethylene oxides) with two terminal hydroxyl groups by phosgenation. The quinone groups incorporated into the polymer chain were reduced to hydroquinone groups. Some of these polymers were titrated oxidatively in 90% acetic acid. Their redox behavior cannot be described by a simple Nernst equation. It is assumed that the differences between theoretically expected and experimentally obtained potentials express the amount of work needed to reshape the polymer coil according to a thermodynamically stable distribution of the redox groups.     

Synthesis and photochemical properties of solar energy storage-exchange polymers containing pendant norbornadiene moieties

New photoresponsive polymers 1–4 containing pendant norbornadiene (NBD) moieties with N,N-disubstituted amide groups were synthesized with 97, 98, 92, and 94% conversions by the substitution reaction of poly (p-chloromethyl) styrene] with potassium salts of 3piperidyloxo-2,5-NBD-2-carboxylic acid, 3-(NN-dipropylcarbamoyl) -2,5-NBD-2-carboxylic acid, 3-(N-methyl-N-phenylcarbamoyl)-2,5-NBD-2-carboxylic acid, and 3-(N,N-dipheylcarbmoyl)-2,5-NBD-2-carboxylic acid, respectively, using tetrabutylammonium bromide as a phase transfer catalyst for all. Polymers 1–4 with N,N-disubstituted amide groups on the NBD moieties were sensitized by adding appropriate photosensitizers such as Michler's ketone and 4- (N,N-dimethylamino) benzophenone in the film state, although the reactivities of the polymers without photosensitizer were lower than that of our previously reported polymer 5 containing pendant 3- (N-phenylcarbamoyl) -2,5-NBD-2-carboxylate moiety. It was also found that the photo-irradiated retaining polymers 1–4 containing the corresponding QC moieties can be stored about 80–86 kJ/mol of their thermal energy. © 1994 John Wiley & Sons, Inc.     

Thermotropic liquid crystalline polymers. I. Cholesterol-containing polymers and copolymers

An approach to the creation of thermotropic cholesterol-containing liquid crystalline polymers by the chemical binding of cholesterol molecules with side chains of comblike polymers is presented. This type of structure permits a decrease in the steric hindrances provided by the backbone chains for the purpose of realizing the liquid crystalline state. A number of new cholesteric esters of poly(N-methacryloyl-ω-aminocarbonic acid)s (PChMAA-n) with different side-chain lengths (n = 2–11) as well as a series of copolymers of ChMA-n with n-alkylacrylates and n-alkylmethacrylates have been synthesized. The experimental evidence of liquid crystalline structure formation in these polymers in glass, viscoelastic, and fluid states is discussed. Molecular and supermolecular structures of cholesterol-containing comblike polymers have been studied and the model of macromolecular packing in the liquid crystalline state is proposed. It is shown that the existence of a layered order of side methylene groups together with ordering of cholesterol groups is necessary to the production of the liquid crystalline state in these polymers.     

Electron-transfer polymers. XL. Redox polyamides

By condensing a hydroquinone bis-lactone of 1,4-dihydroxybenzene-2,5-bis(ethyl-2′-carboxylic acid) with diamines such as hexamethylene diamine, piperazine, 4-aminoethylpiperidine, or 1,3-di-(4′-piperidinyl) propane, redox polyamides can be prepared. The lactone functions protect the hydroxyl groups until the polymerization occurs at which point, due to the opening of the lactone rings, free hydroquinone hydroxyls appear. The resulting polymer is oxidizable. When the oxidized polymer is reduced the viscosity is higher than that of the original reduced polymer.     

A solid-state redox buffer as interface of solid-contact ISEs

Graphite with a surface-confined redox buffer system was used as solid contact in solid-contact ion-selective electrodes (SC-ISE). Potentiostatically preconditioning of the redox buffer ensures that the ratio of oxidized and reduced groups is unity, i.e., a maximum buffer capacity. These SC-ISEs exhibited a very high reproducibility and stability of potentials. Graphite modification was achieved by generating carboxylic surface groups via oxidation with nitrosulfuric acid and subsequent modification of the acidic groups with n-(2,5-dimethoxyphenyl)ethyl-1-amine (DMPEA). Composite electrodes of modified graphite and polymethylmetharcrylate (PMMA) as binder were used as solid-contact of polymer membrane K⁺-and F^?-sensitive SC-ISEs. The solid-state redox buffer decreased potential variation from several hundred mV to just a few mV.     

Electron-transfer polymers. XXXIV. Redox polyurethanes from p-benzoquinone-2,5-diols and diisocyanates

It is possible to prepare polyurethanes from p-benzoquinone-diols and diisocyanates by using dibutyltin diacetate catalyst at room temperature or below, since the benzoquinone group does not react with isocyanate under these conditions. This permits preparation of new redox polymers. In preparing the polyurethanes excess isocyanate groups must be destroyed at the end of the reaction time in order to prevent crosslinking during work-up. These polymers are readily reduced by aqueous hydrosulfite. Good viscosity numbers are obtained; and, in general, upon reduction the viscosity increases over that of the oxidized form. There is no evidence of crosslinking. When oxidized and reduced forms of these polymers are mixed there is no evidence of charge transfer.     

Charge-transfer complexing in polymer mixtures. IV. Acceptor polymers from nitrophthalic acids and their mixtures with donor polymers from aryliminodiethanols

A series of electron acceptor polyesters was prepared from 5-nitroisophthalic, nitroterephthalic, and 4,6-dinitroisophthalic acids. Those polymers prepared at high molecular weight were tough, soluble, linear materials of well-defined structure. These materials were mixed with electron-donor polymers based on aryliminodiethanols where the aryl group was phenyl, p-anisyl, 2,5-dimethoxyphenyl, and 3,4,5-trimethoxyphenyl. The effects of the mixtures on the mechanical, spectral, viscometric, and conductive properties were studied and compared to the component polymers.     

Rigid-ladder polymers: Polymers containing anthraquinone recurring units

In an attempt to synthesize some processable ladder or partial ladder polymers containing anthraquinone recurring units, leucoquinalizarin was treated with 3,3′-diaminobenzidine. This polymer, which was a black powdery material, was slightly soluble in concentrated sulfuric acid and dimethylsulfoxide. Also, 1,5-diamino-2,6-dimercaptoanthraquinone was condensed with 2,5-dichloro-p-benzoquinone in pyridine to give a black powdery polymer. This was only partially soluble in concentrated sulfuric acid, but could be solubilized in alkali by reduction with sodium dithionite.     

Quinone based conducting redox polymers for electrical energy storage

Conducting redox polymers (CRPs) constitute a promising class of materials for the development of organic matter based batteries with the potential to overcome the main limitations connected to this type of rechargeable battery systems including low conductivity and dissolution problems. In this report we show that the potential of quinones can be effectively tuned into the conducting region of polypyrrole (PPy), both in water based solutions and in acetonitrile, which is a prerequisite for profitable combination of the two units. We also present a device where both anode and cathode are made from PPy substituted with different quinone pendant groups and where good rate performance is achieved without any conductivity additives thus providing support for the hypothesized synergetic effect of a conducting polymer backbone and a covalently attached redox active pendant group. This device constitutes, to the best of our knowledge, the first all-CRP based battery reported to date.     

Redox electrodeposition polymers: adaptation of the redox potential of polymer-bound Os complexes for bioanalytical applications

The design of polymers carrying suitable ligands for coordinating Os complexes in ligand exchange reactions against labile chloro ligands is a strategy for the synthesis of redox polymers with bound Os centers which exhibit a wide variation in their redox potential. This strategy is applied to polymers with an additional variation of the properties of the polymer backbone with respect to pH-dependent solubility, monomer composition, hydrophilicity etc. A library of Os-complex-modified electrodeposition polymers was synthesized and initially tested with respect to their electron-transfer ability in combination with enzymes such as glucose oxidase, cellobiose dehydrogenase, and PQQ-dependent glucose dehydrogenase entrapped during the pH-induced deposition process. The different polymer-bound Os complexes in a library containing 50 different redox polymers allowed the statistical evaluation of the impact of an individual ligand to the overall redox potential of an Os complex. Using a simple linear regression algorithm prediction of the redox potential of Os complexes becomes feasible. Thus, a redox polymer can now be designed to optimally interact in electron-transfer reactions with a selected enzyme.     

Electrical wiring of Pseudomonas putida and Pseudomonas fluorescens with osmium redox polymers

Two different flexible osmium redox polymers; poly(1-vinylimidazole)12-[Os-(4,4'-dimethyl-2,2'-di'pyridyl)2Cl2](2+/+) (osmium redox polymer I) and poly(vinylpyridine)-[Os-(N,N'-methylated-2,2'-biimidazole)3](2+/3+) (osmium redox polymer II) were investigated for their ability to efficiently "wire" Pseudomonas putida ATCC 126633 and Pseudomonas fluorescens (P. putida DSM 6521), which are well-known phenol degrading organisms, when entrapped onto cysteamine modified gold electrodes. The two Os-polymers differ in redox potential and the length of the side chains, where the Os(2+/3+)-functionalities are located. The bacterial cells were adapted to grow in the presence of phenol as the sole source of organic carbon. The performance of the redox polymers as mediators was investigated for making microbial sensors. The analytical characteristics of the microbial sensors were evaluated for determination of catechol, phenol and glucose as substrates in both batch analysis and flow analysis mode.     

Synthesis of polymers bearing pendant norbornadiene moieties by addition reaction of poly(glycidyl methacrylate-co-methyl methacrylate)s with 2,5-norbornadiene-2-carboxylic acids

Polymers bearing photoresponsive norbornadiene (NBD) moieties were synthesized by the addition reaction of poly(glycidyl methacrylate-co-methyl methacrylate)s containing pendant epoxide groups with 3-phenyl-2,5-norbornadiene-2-carboxylic acid (PNBC), 3-[(phenyl)carbamoyl]-2,5-norbornadiene-2-carboxylic acid 3-[(4-acetylphenyl) carbamoyl]-2,5-norbornadiene-2-carboxylic acid (APCND), and 3-[(4-methoxyphenyl)carbamoyl]-2,5-norbornadiene-2-carboxylic acid using tetrabutylammonium bromide as a catalyst in DMF. The polymers bearing pendant PNBC or APCND moieties have higher photochemical reactivity in the film state than the polymers bearing pendant PCND or MPCND moieties. Although the pendant quadricyclane (QC) group produced by the photoirradiation of the PNBC moiety in these polymers has excellent storage stability in the film state, without catalyst at room temperature, the QC group in the polymer film with the catalyst reverts gradually to the NBD moiety at room temperature. © 1993 John Wiley & Sons, Inc.     

Poly(p-phenylenes) with well-defined side chain polymers

1,4-Dibromo-2,5-bis(bromomethyl)benzene and benzene-2,5-dibromomethyl-1,4-bis(boronic acid propanediol diester) were used as bifunctional initiators in Atom Transfer Radical Polymerization (ATRP) of styrene or in cationic ring opening polymerization (CROP) of tetrahydrofuran in conjunction with CuBr /2,2'-bipyridine or AgSbF₆, respectively. The resulting well-defined macromonomers with low polydispersities, bearing functional groups as bromine or boronic ester were used in Suzuki or Yamamoto type couplings, leading to poly(p-phenylene)s (PPPs) with polystyrene (PSt), polytetrahydrofuran (PTHF) or alternating PSt/PTHF side chains. The new polymers were characterized by GPC, ¹H-NMR, ¹³C-NMR, IR and UV analysis. Thermal behavior of the precursors PSt or PTHF macromonomers and the final polyphenylenes were investigated by TGA and DSC analyses and compared.     

Thermally stable silarylene-1,3,4-oxadiazole polymers

The effects of incorporating a p-phenylene- (or m-phenylene)-1,3,4-oxadiazole fragment into the backbone of poly[1,4-phenylene(diphenylsilyl)-1,4-phenylene-2,5-(1,3,4-oxadiazole)], which was developed by the authors, was investigated. Bis[(p-carbohydrazidophenyl)]diphenylsilane was copolymerized with dipentachlorophenyl terephthalate or isophthalate to produce the prepolymers poly[N-(p-diphenylsilylbenzoyl)-N′N″-(terephthaloyl)-N″′-(p-benzoyl)dihydrazide] and poly[N-(p-diphenylsilylbenzoyl)-N′,-N″-(isophthaloyl)-N″′-p-(benzoyl) dihydrazide], respectively. The polyhydrazides were converted by thermal dehydration into poly[1,4-phenylene(diphenylsilyl)-1,4-phenylene-(1,3,4-oxadiazole-2,5-diyl)-1,4-phenylene-2,5-(1,3,4-oxadiazole)] and poly[1,4-phenyl-ene(diphenylsilyl)-1,4-phenylene-(1,3,4-oxadiazole-2,5-diyl)-1,3,4-(oxadiazole)]. The new polymers were soluble in organic solvents. Films cast from these solutions exhibited good adhesion to glass and metal surfaces. Thermal analysis showed that the heat stability of all these polymers was about the same and that they were resistant to decomposition when heated in air to about 400°C. The results also indicated that these polymers were somewhat less heat-resistant than samples of poly-[1,4-phenylene(diphenylsilyl)-1,4-phenylene-2,5-]1,3,4-(oxadiazole) synthesized from bis(p-carbohydrazidophenyl)diphenylsilane and bis-(p-carbopentachlorophenoxy-phenyl)diphenylsilane.     

Partial ladder polymers with anthraquinone units. Reaction of 1,2,5,6-tetraaminoanthraquinone with p-benzoquinone derivatives

1,2,5,6-Tetraaminoanthraquinone has been condensed with 2,5-diaminobenzoquinone, 2,5-diaminobenzoquinone diimide, and 2,5-diaminohydroquinone to give partial ladder polymers which are only slightly soluble in sulfuric acid and do not produce soluble products on reduction with sodium dithionite in alkaline media.     

Evaluation of performance and stability of biocatalytic redox films constructed with different copper oxygenases and osmium-based redox polymers

We are interested in investigating the applications of biocatalytic mediated reduction of oxygen by oxygenases in films on electrode surfaces, as such reactions can form the basis for biosensors or biocatalytic fuel cell development. Here we present approaches aimed at improving the stability and signal output of such films. These include selection of oxygen reducing biocatalysts which are active under physiological conditions and development of redox mediators which offer the opportunity to tailor the mediator to each enzyme. It was found that for each enzyme Melanocarpus albomyces laccase (MaL), Trametes hirsutus laccase (ThL) or bilirubin oxidase (MvBOD) it was the biocatalytic films mediated by Os(2,2′-bipyridine)₂Cl·PVI that not only generated the highest current densities compared to Os(4,4′-dimethyl-2,2′-bipyridine)₂Cl·PVI and Os(4,4′-dichloro-2,2′-bipyridine)₂Cl·PVI, but also proved to be the most stable over 48 h. Under physiological conditions electrodes constructed from MvBOD generated the highest initial current densities for each of the osmium redox polymers, however these films proved to be the least stable over 48 h. Stability could be improved using surface pre-treatment.     

Metallic and non-metallic redox response of conducting polymers

The potentiometric response of electrodes coated with polypyrrole or poly(N-methylpyrrole) films with different doping anions was studied in solutions containing the redox couples: Fe(CN)₆^3−/4−, Ru(NH₃)₆^3+/2+ and Fe(Ill)/Fe(II). The stable potential measured with the electrodes was the potential of the redox couple. The response time was instant for polypyrrole doped with dodecylsulphate ions, PPy(DS) and slow for the polymers doped with mobile anions. On the basis of electrochemical measurements and chemical analysis by EDAX spectroscopy it was found that with the PPy(DS) electrode the potentiometric response was of the ‘metallic’ type, with no change in the oxidation state of the bulk polymer. With the other polymer systems studied reduction or oxidation of the polymer bulk took place when it was in contact with a redox couple in the solution.     

Electroanalytical measurements without electrolytes: Conducting polymers as probes for redox titration in non-conductive organic media

Electroanalytical methods have been applied only in conducting media. An application of conducting polymers allows to overcome this limitation. If such material is in electrochemical equilibrium with dissolved redox active species, its electrical conductivity depends on the redox potential of these species. Therefore, conductometric measurements with conducting polymers can provide about the same information as classical redox electrodes. The approach was applied for redox titration. Equivalent points obtained by this titration in aqueous and organic electrolytes were identical. Then the approach was applied for determination of bromine number by redox titration in non-conducting organic phase.