Preparation and nonlinear optical properties of novel Y-type polyesters with highly enhanced thermal stability of second harmonic generation

3,4-Di-(2′-hydroxyethoxy)benzylidenemalononitrile (3) was prepared and condensed with terephthaloyl chloride and adipoyl chloride to yield novel Y-type polyesters (4-5) containing 3,4-dioxybenzylidenemalononitrile groups as NLO-chromophores, which constituted parts of the polymer main-chains. The resulting polymers 4-5 are soluble in common organic solvents such as acetone and N,N-dimethylformamide. They showed thermal stability up to 300 °C in thermogravimetric analysis with glass-transition temperatures obtained from differential scanning calorimetry in the range 89-91 °C. The second harmonic generation (SHG) coefficients (d₃₃) of poled polymer films at the 1064 nm fundamental wavelength were around 2.47 pm/V. The dipole alignment exhibited high thermal stability even at 10 °C higher than T_g, and there is no SHG decay below 100 °C due to the partial main-chain character of polymer structure, which is acceptable for NLO device applications.     

Synthesis and properties of novel Y‐type nonlinear optical polyimides with high thermal stability of second harmonic generation

2,4‐Bis‐(3,4‐dicarboxyphenylcarboxyethoxy)‐1‐(2,2‐dicyanovinyl)benzene dianhydride (4) was prepared and reacted with 4,4′‐oxydianiline, 4,4′‐diaminobenzanilide and 4,4′‐(hexafluoroisopropylidene)dianiline to yield novel Y‐type polyimides 5‐7 containing 2,4‐dioxybenzylidenemalononitrile groups as nonlinear optical (NLO) chromophores, which constitute parts of the polymer backbone. The resulting polyimides 5‐7 are soluble in polar solvents such as dimethylsulfoxide and N,N‐dimethylformamide. Polymers 5‐7 showed a thermal stability up to 330 °C in thermogravimetric analysis thermograms with T_g values obtained from differential scanning calorimetry thermograms in the range 179–194 °C. The second harmonic generation (SHG) coefficients (d₃₃) of poled polymer films at the 1064 nm fundamental wavelength were around 5.56 × 10^?9 esu. The dipole alignment exhibited exceptionally high thermal stability even at 20 °C higher than the glass‐transition temperature there was no SHG decay below 215 °C because of the partial main‐chain character of polymer structure, which is acceptable for NLO device applications. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3078–3087, 2008     

Molecular design,synthesis, and nonlinear optical properties of novel T‐type polyimides with exceptionally high thermal stability of the second harmonic generation

2,5‐Bis‐(3,4‐dicarboxyphenylcarboxyethoxy)‐4′‐nitrostilbene dianhydride was prepared and reacted with 1,4‐phenylenediamine, 4,4′‐oxydianiline, 4,4′‐diaminobenzanilide, and 4,4′‐(hexafluoroisopropylidene)dianiline to yield unprecedented novel T‐type polyimides ( 4 – 7 ) containing 2,5‐dioxynitrostilbenyl groups as nonlinear optical chromophores, which constituted parts of the polymer backbones. 4 – 7 were soluble in polar solvents such as acetone and N,N‐dimethylformamide. They showed thermal stability up to 300 °C in thermogravimetric analysis thermograms; the glass‐transition temperatures obtained from differential scanning calorimetry thermograms were around 153 °C. The second harmonic generation (SHG) coefficients (d₃₃) of poled polymer films at the 1064‐cm^?1 fundamental wavelength were around 4.35 × 10^?9 esu. The dipole alignment exhibited exceptionally high thermal stability even at 45 °C higher than the glass‐transition temperature, and there was no SHG decay below 200 °C because of the partial main‐chain character of the polymer structure, which was acceptable for nonlinear optical device applications. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3189–3199, 2004     

Synthesis and electro‐optic properties of novel X‐type polyurethane containing nitrophenylazonitroresorcinoxy group with highly enhanced thermal stability of dipole alignment

Novel X‐type polyurethane 4 containing 4‐(4‐nitrophenylazo)‐6‐nitroresorcinoxy groups as nonlinear optical (NLO) chromophores, which are parts of the polymer main chains, was prepared and characterized. Polyurethane 4 is soluble in common organic solvents such as acetone and N,N‐dimethylformamide. It shows thermal stabilities up to 270 °C from thermogravimetric analysis with glass transition temperature obtained from differential scanning calorimetry of about 134 °C. The second harmonic generation (SHG) coefficient (d₃₃) of poled polymer film at 1064 nm fundamental wavelength is 5.37 × 10^?9 esu. Polymer 4 exhibits a thermal stability up to T_g, and no significant SHG decay is observed below 135 °C, which is acceptable for NLO device applications. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 760–766     

Synthesis and nonlinear optical properties of novel Y‐type polyester containing tricyanovinylthiazolylazoresorcinoxy group with enhanced thermal stability of dipole alignment

Novel Y‐type polyester 4 containing 5‐methyl‐4‐{5‐(1,2,2‐tricyanovinyl)‐2‐thiazolylazo}resorcinoxy groups as nonlinear optical (NLO) chromophores, which are parts of the polymer backbone, was prepared, and its NLO properties were investigated. Polyester 4 is soluble in common organic solvents such as N,N‐dimethylformamide and dimethylsulfoxide. Polymer 4 shows a thermal stability up to 250 °C from thermogravimetric analysis with glass‐transition temperature obtained from differential scanning calorimetry of approximately 94 °C. The second harmonic generation (SHG) coefficient (d₃₃) of poled polymer film at 1560‐nm fundamental wavelength is 8.12 × 10^?9 esu. The dipole alignment exhibits a thermal stability even at 6 °C higher than glass‐transition temperature (T_g), and no significant SHG decay is observed below 100 °C due to the partial main‐chain character of polymer structure, which is acceptable for NLO device applications. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Molecular design,synthesis, and properties of Y‐type nonlinear optical polyester containing tricyanovinylthiophene with enhanced thermal stability of second harmonic generation

1‐{3,4‐Di‐(2‐hydroxyethoxy)phenyl}‐2‐(2‐thiophenyl)ethene (5) was prepared and condensed with terephthaloyl chloride to yield polyester (6). Polymer 6 was reacted with tetracyanoethylene to give a new Y‐type polyester (7) containing 1‐(3,4‐dioxyethoxy)phenyl‐2‐{5‐(2,2,3‐tricyanovinyl)‐2‐thiophenyl)}ethenyl groups as NLO‐chromophores, which are components of the polymer backbones. Polyester 7 is soluble in common organic solvents such as N,N‐dimethylformamide and acetone. Polymer 7 showed a thermal stability up to 300 °C in thermogravimetric analysis with glass transition temperature (T_g) obtained from differential scanning calorimetry near 126 °C. The second harmonic generation (SHG) coefficient (d₃₃) of poled polymer film at the 1560 nm fundamental wavelength was around 6.57 × 10^?9 esu. The dipole alignment exhibited high thermal stability up to the T_g, and there was no SHG decay below 125 °C due to the partial main‐chain character of polymer structure, which is acceptable for NLO device applications. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1911–1919, 2009     

Synthesis and nonlinear optical properties of novel Y‐type polyurethane containing tricyanovinylthiazole with enhanced thermal stability of second harmonic generation

A novel Y‐type poly[iminocarbonyloxyethyl‐5‐methyl‐4‐{2‐thiazolylazo‐4‐(1,2,2‐tricyanovinyl)}resorcinoxyethyloxycarbonylimino‐(3,3′‐dimethoxy‐4,4′‐biphenylene)] 4 containing 5‐methyl‐4‐{5‐(1,2,2‐tricyanovinyl)‐2‐thiazolylazo}resorcinoxy groups as nonlinear optical (NLO) chromophores, which constitute part of the polymer backbone, was prepared and characterized. Polyurethane 4 is soluble in common organic solvents such as acetone and N,N‐dimethylformamide. It showed a thermal stability up to 250 °C in thermogravimetric analysis thermogram and the glass‐transition temperature (T_g) obtained from differential scanning calorimetry thermogram was around 118 °C. The second harmonic generation coefficient (d₃₃) of poled polymer films at 1560 nm fundamental wavelength was around 8.43 × 10^?9 esu. The dipole alignment exhibited a thermal stability even at 12 °C higher than T_g, and there was no SHG decay below 130 °C due to the partial main‐chain character of the polymer structure, which is acceptable for NLO device applications. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1166–1172, 2010     

The design,synthesis, and nonlinear optical properties of novel X‐type polyurethane containing dicyanovinylnitroresorcinoxy group with enhanced SHG thermal stability

Novel X‐type polyurethane 5 containing 4‐(2′,2′‐dicyanovinyl)‐6‐nitroresorcinoxy groups as nonlinear optical (NLO) chromophores, which constitute parts of the polymer backbone, was prepared and characterized. Polyurethane 5 is soluble in common organic solvents such as acetone and N,N‐dimethylformamide. It shows thermal stability up to 280 °C from thermogravimetric analysis with a glass transition temperature (T_g) obtained from differential scanning calorimetry thermogram of around 120 °C. The second harmonic generation (SHG) coefficient (d₃₃) of poled polymer film at 1064‐nm fundamental wavelength is around 6.12 × 10^?9 esu. The dipole alignment exhibits a thermal stability even at 5 °C higher than T_g, and there was no SHG decay below 125 °C due to the partial main chain character of the polymer structure, which is acceptable for NLO device applications. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis and characterization of interpenetrating polymer networks with nonlinear optical properties

We report the synthesis and characterization of interpenetrating polymer networks (IPNs) exhibiting nonlinear optical (NLO) properties. The network consists of aliphatic polycarbonate urethane (PCU) and poly(methyl methacrylate-co-N,N-disubstituted urea), with a nonlinear optical (NLO) chromophore incorporated into N,N-disubstituted urea. The full IPNs have only one T_g, as determined by differential scanning calorimetry (DSC), together with scanning electron microscopy (SEM) observations, suggest a single phase morphology. The thin films of IPNs are transparent and the unpoled samples produced second harmonic generation (SHG) signals at room temperature. This result indicates that the NLO chromophore is oriented noncentrosymmetrically during the IPN formation process and is tightly held between the permanent entanglements of the two component networks of the IPN. © 1996 John Wiley & Sons, Inc.     

Molecular design, synthesis and electro-optic properties of novel Y-type polyurethanes with high thermal stability of second harmonic generation

2,4-Di-2^′-hydroxyethoxy)benzylidenemalononitrile (3) was prepared and condensed with 2,4-toluenediisocyanate and 3,3^′-dimethoxy-4,4^′-biphenylenediisocyanate to yield unprecedented novel Y-type polyurethanes (4-5) containing 2,4-dioxybenzylidenemalononitrile group as a nonlinear optical (NLO) chromophore, which constitutes a part of the polymer backbone. The resulting polyurethanes 4-5 were soluble in common organic solvents such as acetone and DMF. Polymers 4-5 showed a thermal stability up to 260 °C from thermogravimetric analysis (TGA) with differential scanning calorimetry (DSC) giving T_g values around 143-156 °C. The approximate lengths of aligned NLO-chromophores estimated from AFM images of poled polymer films were about 10 nm. The SHG coefficients (d₃₃) of poled polymer films were around 7.4 × 10⁻⁹ esu. These Poled polymers exhibited a greater thermal stability of dipole alignment even at 10 °C higher than T_g, and no SHG decay was observed below 155 °C due to the partial main chain character of the polymer structure and extensive hydrogen bonds between urethane linkage, which is acceptable for NLO device applications.     

Synthesis and characterization of Y‐type polymers for second‐order nonlinear optical applications

A series of dicyanomethylene‐substituted polymers having Y‐type molecular architecture were synthesized by Knoevenagel condensation reaction. The polymers were found to be soluble in organic solvents like tetrahydrofuran and chloroform. From gel permeation chromatography, the molecular weights of the polymers were found to be in the range of 15,300–33,800 g/mol. Thermal analysis showed that the polymers were stable up to 350 °C with glass transition temperature (T_g) in the range of 129–212 °C. These polymers were found to form good optical quality films. The order parameter was calculated to be in the range of 0.01–0.48. Atomic force microscopy indicated prominent morphology changes due to alignment of dipoles after poling. By using Nd:YAG laser of 1064 nm, angular dependence and temperature dependence of second‐harmonic generation intensity were investigated. The geometry optimization, shape of polymers, and restricted torsion angle between acceptor and donor substituents (push–pull system) were calculated. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis and properties of novel polyurethanes containing 3,4‐dioxybenzylidenecyanoacetate group as a nonlinear optical chromophore

Methyl 3,4‐di‐(2′‐hydroxyethoxy)benzylidenecyanoacetate ( 3 ) was prepared by hydrolysis of methyl 3,4‐di‐(2′‐vinyloxyethoxy)benzylidenecyanoacetate ( 2 ). Diol 3 was condensed with 2,4‐toluenediisocyanate, 3,3′‐dimethoxy‐4,4′‐biphenylenediisocyanate, and 1,6‐hexamethylenediisocyanate to yield polyurethanes 4 – 6 containing the nonlinear optical chromophore 3,4‐dioxybenzylidenecyanoacetate. The resulting polyurethanes 4 – 6 were soluble in common organic solvents such as acetone and dimethylformamide. Polymers 4 – 6 indicated thermal stability up to 300 °C in thermogravimetric thermograms with glass‐transition temperature values obtained from differential scanning calorimetric thermograms in the range of 78–102 °C. The second‐harmonic generation coefficients (d₃₃) of the poled polymer films were around 6.9 × 10^?9 esu. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1742–1748, 2002     

Effect of aromatic substitution in aniline on the properties of polyaniline

Substitution in aniline has tremendous effect in the synthesis of poly(substituted anilines) as well as in their properties. In this investigation polyaniline (PANI), poly(m-nitro aniline) (PMNA), poly(m-amino phenol) (PMAP) and poly(o-ethyl aniline) (POEA) were synthesized by oxidative polymerization under identical conditions. Different properties were measured and compared with PANI to find out the presence of electron donating -OH group, electron withdrawing -NO₂ group and less effecting ethyl group on the properties of poly(substituted anilines). It was found that presence of any type of substitution in the benzene ring of aniline increases the solubility of the resulted polymer but reduces the yield, degree of polymerization, thermal stability, electrical and thermal conductivity. The colors, bulk density, particle size, percentage of crystallinity vary considerably depending on the nature of substitution.     

Synthesis of nonlinear optical polyimides containing azodiamine derivative chromophores and their electrooptic and thermal properties

Some thermally stable second‐order nonlinear optical (NLO) polyimides were synthesized. The polyimides were prepared by the ring‐opening polyaddition of 4,4′‐(hexafluoroisopropylidene) diphthalic anhydride and pyromellitic dianhydride with two aromatic azodiamine derivatives as the NLO chromophores. These chromophores, based on a nitro group connected with azobenzene as the acceptor end of a donor–π‐bridge–acceptor chromophore and a diamine group as the donor end, had specific chemical stability. On the basis of ZERNER'S INDO methods, according to the sum‐over‐states formula, a program for the calculation of nonlinear second‐order optical susceptibilities was devised. The resulting polyimides had high number‐average and weight‐average molecular weights of up to 26,000 and 53,500, respectively, and a large glass‐transition temperature of 248 °C. With an in situ poling and temperature ramping technique, the optimal temperatures (T_opt's) for corona poling were obtained for the largest second‐order NLO response. The electrooptic coefficient (γ₃₃) of a polyimide at a wavelength of 830 nm was up to 21 pm/V after corona poling under its T_opt, and the value remained at elevated temperatures (>90.6% was retained at 240 °C for >120 h). The thermal stability of the NLO polyimides was studied with UV spectrometry after poling of the films. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2478–2486, 2002     

Characterization, Solution Behavior, and Microstructure of a Hydrophobically Associating Nonionic Copolymer

To obtain an oil-displacement polymer with good thermal stability and solution properties, self-assembling acrylamide (AM)/4-butylstyrene (BST) copolymers (PSA) were synthesized by the micellar copolymerization technique. The resulting polymer was characterized by elemental analysis and UV and FT-IR spectroscopy. Conventional DSC measurement was used successfully to characterize the hydrophobic microblock structure of PSA, and two glass transition temperatures were found in the polymer: at 203 °C for the AM segments and at 106 °C for the hydrophobic BST segments. The initial decomposition temperature (234 °C) of the polymer is higher than that of polyacrylamide (210 °C). The DSC and TG results suggest that incorporation of BST into PSA enhances the molecular rigidity and thermal stability of the polymer. The apparent viscosity of a PSA solution greatly depends on the amount of BST in the polymer, and the polymer exhibits salt-thickening, temperature-thickening, thixotropy, pseudo-plastic behavior, anti shearing, and good anti-aging properties at 80 °C. In addition, the apparent viscosities of PSA solutions are increased remarkably by the addition of a small amount of surfactant. AFM measurements show that large block-like aggregates and small compact aggregates are formed in aqueous solutions of 0.4 g⋅dL⁻¹ PSA because of strong intermolecular hydrophobic associations, despite the low molecular weight, and their sizes increase upon addition of a small amount of salt.     

Synthesis of chromophores and polyimides with a green chemistry approach for second‐order nonlinear optical applications

This article presents the synthesis of nonlinear optical responsive chromophores by adopting a green chemistry approach by coupling N‐methyl‐N‐(2‐hydroxyethyl)‐4‐amino benzaldehyde with barbituric acid, 1,3‐indanedione, and 1,3‐diethyl‐2‐thiobarbituric acid as the acceptors through stilbene linkage. We performed the synthesis in less than 10 minutes at room temperature with water as a solvent without catalyst. Two different side‐chain polyimides were synthesized from poly(hydroxy‐imide)s with chromophores by Mitsunobu reaction. The chromophores were characterized by Fourier transform infrared, ¹H NMR, ¹³C NMR, and elemental analysis. However, the polyimides were characterized by Fourier transform infrared and ¹H NMR. The inherent viscosities (η_inh) of polyimides were determined by Ubbelohde viscometer, which ranged between 0.1793 and 0.1890 dL/g. The molecular weights of the polyimides were determined using gel permeation chromatography and were in range of 23 000 to 26 000. Polyimides demonstrated an excellent solubility in polar aprotic solvents, indicating good processability. Thermal behavior of these polyimides was studied by differential scanning calorimetry and thermogravimetric analysis. The T_g's were in the range of 185°C to 255°C. The change in the molecular orientation in the polymer films after electrical poling was ascertained using ultraviolet‐visible spectrophotometer and atomic force microscopy. The thicknesses and refractive indices of the thin films were determined by an ellipsometer. The second harmonic generation coefficients of the corona‐poled polymer films at T_opt's, determined by the Maker fringe technique, ranged between 59.33 and 77.82 pm/V. High thermal endurance observed for the polyimides is attributed to the extensive hydrogen bonds in the matrix. The developed polyimides showed no decay in second harmonic generation signals below 110°C, indicating the acceptance for nonlinear optical devices.     

Synthesis,thermal, and rheological properties of poly(trimethylene terephthalate)/BaSO4 nanocomposites

A novel method was developed for fabricating poly(trimethylene terephthalate) (PTT)/BaSO₄ nanocomposites using in situ polymerization. A nano‐BaSO₄ suspension was prepared by reacting H₂SO₄ with Ba(OH)₂ in 1,3‐propanediol (PDO). The mean size of original nano‐BaSO₄ is 15–23 nm. PTT matrix was synthesized by condensation polymerization of bis(3‐hydroxypropyl terephthalate) after the completion of transesterification of dimethyl terephthalate (DMT) with PDO. It was found that the addition of BaSO₄ had little influence on the synthesis of PTT. The properties of nanocomposites with a wide range of BaSO₄ fraction were systematically studied. The morphologies of the composites were investigated by transmission electron microscopy (TEM), which showed that agglomerate structures did not form until BaSO₄ content higher than 8 wt%. The thermal properties of the nanocomposites were investigated by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). The DSC results revealed that the triple endothermic melting phenomenon is only observed for the nanocomposites which contained 4 wt% BaSO₄, other samples exhibit double endothermic melting. These results indicated that nano‐BaSO₄ could induce a microcrystal to form more perfect morphology and restrain the formation of much thicker lamellar crystallinity, that is, nano‐BaSO₄ could induce the formation of more uniform crystallinity. Besides, the crystallization ability of the composites was greatly improved by loading nano‐BaSO₄. The TGA results suggested that nano‐BaSO₄ slightly increased the maximum‐decomposing‐rate temperature 1 (T_max1), but markedly increased the maximum‐decomposing‐rate temperature 2 (T_max2). Furthermore, the steady‐state shear behavior of samples was investigated by a parallel‐plate rheometer. The storage modulus (G') and loss modulus (G”) curves shifted to higher modulus upon addition of 2–16 wt% of nano‐BaSO₄. All of the samples investigated exhibited the expected shear‐thinning behavior. Proper contents of nano‐BaSO₄ would decrease the shear viscosity of nanocomposites, whereas superfluous amounts would greatly increase the viscosity of nanocomposites and the composites which loaded 8 wt% nano‐BaSO₄ revealed an equivalent shear viscosity compared to pure PTT. Copyright © 2008 John Wiley & Sons, Ltd.     

Morphology, crystalline structure and thermal properties of PEO/MEEP blends

Poly(ethylene oxide) and poly[bis[2-(2′-methoxyethoxy) ethoxy] phosphazene], PEO/MEEP, polymer blends were investigated by thermal analysis, X-ray diffraction, and atomic force microscopy. MEEP is an amorphous polymer and its semicrystalline blends with PEO showed two distinct glass transitions, whose composition dependence was analysed by the Lodge and McLeish self-concentration model. It appears that an amorphous miscible phase is present in these blends. Excess melting enthalpy was observed for blends with high MEEP concentration. PEO lamellar characteristics exhibited changes as a function of MEEP content, both in X-ray patterns and AFM images that indicated the intercalation of MEEP side chains in the lamellar crystalline structure.     

Thermal characterization of the oxo-degradation of polypropylene containing a pro-oxidant/pro-degradant additive

The oxo-degradation process of polypropylene (PP) samples containing different concentrations (4% and 10% w/w) of pro-oxidant/pro-degradant additive Envirocare™ AG1000C was investigated under accelerated test conditions. Samples were initially exposed to UV radiation for 300 h. The tendency to biodegradation in soil medium of these UV-aged samples was then indirectly assessed by an indirect method for a period of 6 months. The entire degradation process of these materials was first examined by monitoring changes in their morphological properties (melting temperature, maximum lamellar thickness and crystallinity) with the ageing time, by Differential Scanning Calorimetry (DSC). Then, changes in the thermal properties (onset temperature and maximum decomposition temperature) of these materials with the ageing time were analysed by Thermogravimetric Analysis (TGA). Furthermore, the kinetics of the thermal decomposition of these PP samples with pro-oxidant/pro-degradant was also studied during the oxo-degradation process, by means of the Chang differential method. During exposure to UV radiation, the more significant changes in the morphological and thermal properties that were detected in PP samples containing pro-oxidant/pro-degradant additive compared to pure PP, clearly suggest a higher level of oxidation in these samples, confirming the effectiveness of this pro-oxidant/pro-degradant additive in promoting the abiotic oxidation of polypropylene during UV-irradiation. Moreover, the level of oxidation observed in UV-aged samples seems to be dependent on the additive load.