A well-defined diblock copolymer of poly-(ethylene oxide)-block-poly (4-vinylpyridine) for separation of basic proteins by capillary zone electrophoresis

A series of well-defined diblock copolymers, poly(ethylene oxide)-block-poly(4-vinylpyridine) (PEO-b-P4VP) used as physical coating of capillaries, were synthesized by atom transfer radical polymerization (ATRP). EOF measurement results showed that all synthesized PEO-b-P4VP diblock copolymer-coated capillaries in this report could suppress EOF effectively compared to the bare fused-silica capillaries, and efficient separations of basic proteins were achieved. The effects of the molecular weight of P4VP block in PEO-b-P4VP and buffer pH on the separation of basic proteins for CE were investigated in detail. Moreover, the relationships between morphologies of PEO-b-P4VP diblock copolymers in buffer, which were studied by transmission electron microscopy, and the separation efficiencies of basic protein with PEO-b-P4VP diblock copolymers coatings were discussed.     

Interfacial change on morphological transitions in styrene-isoprene diblock copolymer

The specific interfacial area (S/V) and interfacial thickness in each microstructure of styrene-isoprene diblock copolymer were estimated by analyzing the deviations from Porod’s law. The thermally induced phase transitions proceeded from lamellae (L) to hexagonally ordered cylinder (HEX), via hexagonally perforated layer (HPL) and gyroid (G). The S/V ratio increased stepwise at the order-order transition (OOT) from L to HEX, via HPL and G. The S/V data can be utilized for OOT determination.     

Charge-mosaic membrane from gamma-irradiated poly(styrene-butadiene-4-vinylpyridine) triblock copolymer

Poly(styrene-butadiene-4-vinylpyridine) triblock copolymers were prepared from styrene (S), butadiene (B), and 4-vinylpyridine (P) by sequential anionic polymerization with n-butyllithium as initiator and benzene as solvent. The triblock copolymer was characterizated by gel-permeation chromatography (GPC), transmission electron microscopy (TEM), and viscoelastic spectrometry. Films of the triblock copolymer cast from solution in mixtures of chloroform and n-butyraldehyde were subjected to gamma-ray irradiation to form cross-linked networks, Cationic and anionic groups were introduced by sulfonation and quater-nization to obtain charge-mosaic membranes. The resulting membrane had substantial cation-exchange and anion-exchange capacities. The membranes were very permeable to electrolyte (J_KCI = 2.10×10^?8 mol/cm² s). © 1993 John Wiley & Sons, Inc.     

Properties of polystyrene-poly(methylmethacrylate) random and diblock copolymers in dilute and semidilute solutions

Solution properties for random and diblock copolymers of polystyrene (PS) and poly(methyl methacrylate) (PMMA) have been measured by dynamic and total intensity light scattering in solvents of differing quality. The results are compared with the corresponding properties for PS and PMMA homopolymers of similar molecular weight, in order to determine if interactions between unlike monomers are significant. The hydrodynamic radius (R_h) and diffusion second virial coefficient (k_d) for the random copolymer are found to be larger than the corresponding values for the homopolymers in a solvent which is near-theta for the two homopolymers, whereas no such effect is observed for the block copolymer. This suggests that most intrachain interactions occur a relatively short distance along the chain backbone. In a mutual good solvent R_h and k_d of the random copolymer are comparable to the average of the values for the homopolymers, indicating that in a good solvent monomer/solvent interactions dominate over monomer/monomer interactions. For an isolated diblock copolymer in a mutual good solvent, there is no evidence that interactions between unlike monomers lead to additional expansion of the entire molecule, as measured by R_h, nor expansion of the individual blocks as probed by light scattering with one block optically masked. However, at low but finite concentration there is evidence (the coefficients of the binary interaction terms in the viscosity and the mutual diffusion coefficient, and the second and third virial coefficients) that a weak ordering effect may exist in block copolymer solutions, far from the conditions where microphase separation occurs. Finally, measurements of ternary polymer-polymer-solvent solutions show no dependence on monomer composition or monomer distribution for the tracer diffusion of probe PS-PMMA copolymers in a PMMA/toluene matrix. This indicate that the frictional interaction is largely unaffected by interactions between unlike monomers. However, there is evidence that the thermodynamic interaction is more unfavorable between a random copolymer and the homopolymer matrix than between a diblock and the matrix. © 1994 John Wiley & Sons, Inc.     

Adsorption of water soluble ionic/hydrophobic diblock copolymer on a hydrophobic surface

Summary We consider the adsorption of aA-B diblock copolymer on a planar hydrophobic surface in aqueous solution. The hydrophobic anchor (A) block is envisioned to avoid water and adsorbs on the solid-liquid interface in a collapsed state. The buoy block (B) is a polyelectrolyte which expands in solution and forms a brush whose structure depends strongly on the ionic strength of the solution. The minimization of the grand canonical free energy of the system gives access to the surface density (), the thickness of the collapsed layer (L _A ) and the thickness of the external polyelectrolyte layer (L _B ). These three parametersL _B ,L _A and are functions of the molecular weight of the anchored block (N _A ), the molecular weight of the buoy block (N _B ), the charge of the polymer (Z) and the ionic strength of the aqueous solution ( _s ).     

Multiple morphological micelles formed from the self-assembly of poly(styrene)-b-poly(4-vinylpyridine) containing cobalt dodecyl benzene sulfonate

A series of supramolecular block copolymers were prepared using poly(styrene)-b-poly(4-vinylpyridine)(PS-b-P4VP) which coordinated with cobalt dodecyl benzene sulfonate (Co(DBS)₂) in tetrahydrofuran (THF). Fourier transformation infrared spectroscopy (FTIR), UV-vis absorption spectroscopy (UV) and differential scanning calorimetry (DSC) showed that Co(DBS)₂ coordinated to the lone electron pairs of the pyridine nitrogens in the P4VP block and leaded to complexes. The supramolecular block copolymers could self-assemble into nanosized micelles with different shapes and dimensions in THF, depending on the number of Co(DBS)₂ groups per 4-vinylpyridine (repeat unit was denoted by n) and the ratio between PS block length and P4VP block length. Transmission electron microscopy (TEM) results showed that when the number of repeat units of P4VP was more than that of PS, micelles with different interesting shapes such as spheres, rods, vesicles, large compound vesicles (LCVs) and the large compound micelles (LCMs) were observed if increasing the content of the Co(DBS)₂ in PS-b-P4VP copolymer/THF solution; When the number of repeat units of P4VP was less than that of PS, the micelle morphologies changed from spheres to rods, bi-layer, and LCMs if the Co(DBS)₂ content was increased progressively.     

pH-Sensitive Wettability Induced by Topologicaland Chemical Transition on the Self AssembledSurface of Block Copolymer简

pH-sensitive wettability of polystyrene-b-poly（4-vinylpyridine） （PS-b-P4VP） self assembled films, exhibiting superoleophobicity under water and hydrophilicity at low pH value, and oleophobicity under water and hydrophobicity at neutral condition, has been realized. The wettability properties resulted from the surface topological and chemical transition, which were confirmed by in situ AFM measurements under water at different pH. At low pH, P4VP chains, which were confined in the hexagonal-packed nanodomains, got protonated into a swollen state, while at high pH, P4VP chains were deprotonated into a collapsed state. The reversible protonation/deprotonation procedure on the molecular scale leads to surface topological and chemical transition, thereby pH-sensitive wettability.     

The surface characterization of styrene-acrylamide copolymer latex particles and their deposition onto fibers

The surface characteristics of styrene-acrylamide (St-AAm) copolymer latex particles were investigated and their deposition onto polyamide (Nylon 6), polyester (polyethylene terephthalate) and polyacrylonitrile fibers was studied. Conductometric titrations and viscosity measurements of latex dispersions revealed the presence of a water-soluble polymer layer on the particle surface and the thickness of its polymer layer increased with increasing acrylamide fraction in a latex particle. The deposition rates of St-AAm copolymer latices onto Nylon 6 and polyester fibers increased with increasing acrylamide fraction and decreasing pH at a constant ionic strength. These deposition phenomena onto Nylon 6 and polyester fibers agreed qualitatively with prediction based on the electrokinetic data of the latices and the fibers. However, a participation of attractive interaction due to an increase in acrylamide fraction was also suggested.The deposition rate onto polyacrylonitrile fiber decreased with increasing acrylamide fraction in spite of a decrease in electrostatic repulsive interaction, and it was found that a specific large repulsive interaction acts between polyacrylonitrile fiber and St-AAm copolymer latex particles.This paper is part VIII in a series on Interfacial electrical studies on the deposition of polymer latexes onto fabrics and the removal of these deposited latexes. Part VII: Tamai H, Kimura I,Suaza T Coll Polym Sci 261: 661 (1983)     

Growth of ordered silver nanoparticles in silica film mesostructured with a triblock copolymer PEO-PPO-PEO

Elaboration of mesostructured silica films with a triblock copolymer polyethylene oxide-polypropylene oxide-polyethylene oxide, (PEO-PPO-PEO) and controlled growth of silver nanoparticles in the mesostructure are described. The films are characterized using UV-visible optical absorption spectroscopy, TEM, AFM, SEM, X-ray diffraction (XRD) and Rutherford backscattering spectrometry (RBS). Organized arrays of spherical silver nanoparticles with diameter between 5 and 8 nm have been obtained by NaBH₄ reduction. The size and the repartition of silver nanoparticles are controlled by the film mesostructure. The localization of silver nanoparticles exclusively in the upper-side part of the silica-block copolymer film is evidenced by RBS experiment. On the other hand, by using a thermal method, 40 nm long silver sticks can be obtained, by diffusion and coalescence of spherical particles in the silica-block copolymer layer. In this case, migration of silver particles toward the glass substrate-film interface is shown by the RBS experiment.     

Surface chemical functionalization of cylindrical nanopores derived from a polystyrene-poly(methylmethacrylate) diblock copolymer via amidation

This paper demonstrated covalent functionalization of surface -COOH groups on cylindrical nanopores derived from a polystyrene-poly(methylmethacrylate) diblock copolymer (PS- b-PMMA) via amidation mediated by 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide (EDC). The surface functionalization led to conversion of the surface charge of the nanopores and also to the shrinkage of effective pore radius, as verified using cyclic voltammetry for PS- b-PMMA-derived nanoporous films immobilized on gold substrates. For native PS- b-PMMA-derived nanoporous films, the redox current of anionic Fe(CN) 6 (3-) decreased with increasing solution pH due to the deprotonation of the surface -COOH groups, whereas those of cationic Ru(NH 3) 6 3+ and uncharged 1,1'-ferrocenedimethanol (Fc(CH 2OH) 2) were similar regardless of pH. In contrast, upon EDC-mediated amidation of the nanopore surface with ethylenediamine, the redox current of Ru(NH 3) 6 3+ decreased with decreasing pH and those of Fe(CN) 6 (3-) and Fc(CH 2OH) 2 were independent of pH. The decrease in redox current of Ru(NH 3) 6 3+ at acidic pH was consistent with the presence of -NH 2 groups on the nanopore surface as a result of the covalent immobilization of ethylenediamine. Furthermore, the redox current of Fc(CH 2OH) 2 decreased upon amidation of the nanopores with tetraethyleneglycol monoamine ((PEO) 4NH 2), reflecting the shrinkage of the effective pore radius. The control of the surface charge and effective radius of the nanopores via EDC-mediated amidation will provide a simple means for controlling the selectivity of molecular mass transport through PS- b-PMMA-derived nanopores.     

Rate of deposition and interaction energy on deposition of polymethyl meth acrylate latex on fibers

Summary In order to study the deposition of polymethyl methacrylate latex on fabrics, viz, polyamide (Nylon 6), polyacrylonitrile (Vonnel), polyester (Tetoron), and cotton as a function of pH, the rates of deposition has been determined by the turbidity measurements, and the relation between the rate of deposition and the interaction energy is mainly considered.The rates of deposition on Vonnel fabric are scarcely influenced by the interaction energy. Those on Tetoron and cotton fabrics decrease with increasing the total interaction energy, but those on cotton fabric increase at the initial stage of deposition at low pH. The rates of deposition on Nylon fabric are interpreted satisfactorily by potentials of fabric and latex particles rather than the interaction energy. It is suggested that the deposition may be influenced by the characteristics of fiber, e.g., surface roughness, heterogeneity of electrostatic potential and absorption of water, in addition to the interaction energy.This paper is Part III in a series on Interfacial electrical studies on the deposition of polymer latexes onto fabrics and the removal of these deposited latexes Part II: H. Tamai, T. Hakozaki, and T. Suzawa, Colloid Polymer Sci.258, 870 (1980).     

Microdomain morphology of lamella‐forming diblock copolymer confined in a thin film

We report the self‐consistent field theory (SCFT) of the morphology of lamella‐forming diblock copolymer thin films confined in two horizontal symmetrical/asymmetrical surfaces. The morphological dependences of thin films on the polymer‐surface interactions and confinement, such as film thickness and confinement spatial structure, have been systematically investigated. Mechanisms of the morphological transitions can be understood mainly through the polymer‐surface interactions and confinement entropy, in which the plat confinement surface provides a surface‐induced effect. The confinement is expressed in the form of the ratio D/L₀, here D is film thickness, and L₀ is the period of bulk lamellar‐structure. Much richer morphologies and multiple surface‐induced morphological transitions for the lamella‐forming diblock copolymer thin films are observed, which have not been reported before. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1–10, 2009     

Synthesis, characterization and flocculation performance of zwitterionic copolymer of acrylamide and 4-vinylpyridine propylsulfobetaine

A novel zwitterionic polyacrylamide AMVPPS copolymer containing sulfobetaine groups was synthesized by copolymerizing acrylamide (AM) and 4-vinylpyridine propylsulfobetaine (4-VPPS) in 0.5 mol/L NaCl solution with potassium persulfate (K₂S₂O₈) and sodium bisulfite (NaHSO₃) as initiator. The structure and composition of AMVPPS copolymer were characterized by FT-IR spectroscopy, ¹H NMR and elemental analyses. Thermal stability and solution properties of AMVPPS copolymer were studied by thermogravimetry analysis (TGA) and viscometry. Anti-polyelectrolyte behavior was observed and was found to be enhanced with increasing 4-VPPS content in copolymer. The flocculation performance for 2.5 g/L kaolin suspension and 2.5 g/L hematite suspension was evaluated by transmittance measurement and phase contrast microscopy. The effects of 4-VPPS content in the copolymer, intrinsic viscosity and the added salt on the flocculation performance were investigated. It was found that AMVPPS copolymer was a good flocculant for both anionic kaolin and cationic hematite suspensions and the flocculation performance of copolymer was much better than that of pure polyacrylamide (PAM). A very wide range of the optimum flocculation concentration, named as “flocculation window”, was found for both suspensions. These flocculation characteristics were mainly dependent on the charge neutralization, the intragroup conformation transition from water to NaCl solution and then the interchain bridging of the zwitterionic AMVPPS copolymer.     

聚苯乙烯-聚(4-乙烯基吡啶)嵌段共聚物LB膜结构形态的研究

采用氯仿作为铺展溶剂,将嵌段共聚物聚苯乙烯-聚(4-乙烯基吡啶)(PS-b-P4VP)稀溶液铺展于空气与水界面上,利用Langmuir-Blodgett(LB)膜技术转移至固体基底.研究了不同的嵌段比、表面压和小分子1-芘丁酸(PBA)的加入对嵌段共聚物气液界面聚集组装的影响.研究发现随着亲水段(P4VP)的增加,聚集组装结构由纳米片状、带状转变成纳米条状、纳米点状结构.表面压对纯PS-b-P4VP聚集组装产生影响,表面压增大,组装体排列紧密;随着表面压的继续增大,单层聚集结构遭到破坏,发生堆叠.加入PBA小分子后,PBA与PS-b-P4VP形成氢键,形态发生明显变化,原来的片状结构转变为条状或点状结构.     

Photolysis-induced micellization of a poly(4-tert-butoxystyrene)-block-polystyrene diblock copolymer

A novel micellization induced by photolysis was attained using a poly(4-tert-butoxystyrene)-block-polystyrene diblock copolymer (PBSt-b-PSt). BSt-b-PSt showed no self-assembly in dichloromethane and existed as isolated copolymers. Dynamic light scattering demonstrated that the copolymer produced spherical micelles in dichloromethane by the irradiation with a high-pressure mercury lamp in the presence of photoacid generators, such as bis(alkylphenyl)iodonium hexafluorophosphate (BAI), diphenyliodonium hexafluorophosphate (DPI), and triphenylsulfonium triflate (TPS). The irradiation time to promote the micellization increased in the order of BAI < DPI < TPS, depending on the UV absorption intensity of the photoacid generators. The efficiency to promote the micellization was also dependent on the block length of the copolymer. Under an identical PBSt block length, the copolymer with the shorter PSt block length more easily formed micelles. The ¹H NMR analysis confirmed that the PBSt-b-PSt copolymer was converted into poly(4-vinyl phenol)-block-PSt, resulting in micelles by self-assembly.     

Getting to the bottom morphology of block copolymer thin films

We demonstrate a general approach for attaining the bottom morphology of block copolymer(BCP) thin films. In our former measurements on PS-b-PMMA films, surface morphology maps of the BCP films revealed distinct ordering regimes where the cylinders orient predominantly perpendicular or parallel to the interface and an ‘intermediate' regime where these morphologies coexist. However, this earlier work did not explore the bottom morphology of BCP thin films. In this study, we investigated the block copolymer morphology near the solid substrate in the cast block copolymer film having a perpendicular cylinder morphology on the surface.     

Design of water-soluble block copolymers containing poly(4-vinylpyridine) by atom transfer radical polymerization

The preparation of block copolymers consisting of poly(4-vinylpyridine) (P4VP) by atom transfer radical polymerization (ATRP) was investigated. The goal was to synthesize water-soluble block copolymers with poly(ethylene oxide) (PEO) as first block, a water-soluble polymer at any pH. First, a PEO macroinitiator was prepared for the ATRP block copolymerization of 4-vinylpyridine. In the second stage, the kinetic behaviour of this block copolymerization was investigated for two different types of PEO-macroinitiators and catalyst systems, based on CuCl or CuCl₂/Cu(0), with tris[2-(dimethylamino)ethyl]amine (Me₆-TREN) as the ligand. Various combinations of initiator and catalyst led to a controlled block copolymerization with optimized results obtained for chlorinated poly(ethylene glycol) monomethyl ether as macroinitiator, together with CuCl₂/Cu(0)/Me₆-TREN as catalyst system. With the latter system, narrow polydispersities (1.25) could be reached for PEO-P4VP block copolymers.     

Physical aging of polystyrene blocks under three-dimensional soft confinement in PS-b-poly(n-butyl methacrylate) diblock copolymer: Two equilibrations on the way

Polystyrene-block-poly(n-butyl methacrylate) (PS-b-PnBMA) was used to investigate three-dimensional (3D) soft confinement effect on physical aging of the PS block therein. The soft confinement is constructed by phase-separated PnBMA domains, as PnBMA is liquid on the aging temperatures of PS blocks due to its low glass transition temperature. In enthalpy recovery, aging response of PS blocks is represented by a low and broad heat capacity peak associated with an enhanced aging rate with respect to homo-PS, when the aging temperature is relatively low. However, the aging response exhibits opposite characteristics at relatively high temperatures, compared with the results of homo-PS. The phase-separated morphology and thus the soft confinement on PS blocks was confirmed by atomic force microscope imaging using the Peak Force quantitative nanomechanical mapping (QNM) technique. Two local maximums of recovered enthalpy versus aging temperature indicate that two equilibration processes exist during aging of confined PS blocks, within a substantially shorter timescale to the bulk. The 3D soft confinement effect on aging of PS blocks is attributed to dual equilibration mechanisms: one dominates at higher aging temperatures, leading to a restrained aging rate, while the other plays a key role at lower aging temperatures, resulting in accelerated physical aging.     

Effect of ionic impurities on the electric field alignment of diblock copolymer thin films

In Forschung hast Du immer zu mir gesagt, Schaffe etwas!. Mein Chef, ich habe immer versucht Deinen Befehlen zu folgen. Ich widme Dir diese Veröffentlichung. Mensch, mit fünf und siebzig bist Du noch jung, schön Geburtstag!The effect of ionic impurities on the electric field alignment of lamellar microdomains in polystyrene-block-poly(methyl methacrylate) diblock copolymer thin films was studied using transmission electron microscopy (TEM) and atomic force microscopy (AFM). At lithium ion concentrations greater than ~210 ppm, the microdomain morphology in block copolymers could be aligned in the direction of an applied electric field, regardless of the strength of interfacial interactions. Complete alignment of the copolymer microdomains, even those adjacent to the polymer/substrate interface, occurred by a pathway where the applied electric field enhanced fluctuations at the interfaces of the microdomains with a wavelength comparable to L_o, the equilibrium period of the copolymer. This enhancement in the fluctuations led to a disruption of the lamellar microdomains into smaller microdomains ~L_o in size, that, in time, reconnected to form microdomains oriented in the direction of the applied field.