Poly(sulfone ether amide amide)s as a new generation of soluble, thermally stable polymers

A new sulfone ether amide diamine was synthesized via three steps, starting from reaction of 4-aminophenol with 4-nitrobenzoyl chloride in the presence of propylene oxide afforded N-(4-hydroxy phenyl)-4-nitrobenzamide (HPNB). In the next step, reduction of nitro group resulted in preparation of 4-amino-N-(4-hydroxy phenyl) benzamide (AHPB). Final step in the preparation of diamine was the reaction of AHPB with bis(4-chlorophenyl) sulfone in the presence of K₂CO₃. All the materials were characterized using conventional spectroscopic methods. Poly(sulfone ether amide amide)s were synthesized by polycondensation reactions of prepared diamine with different diacid chlorides (aromatic and aliphatic ones). The obtained polymers were fully characterized and their physical properties including thermal behavior, thermal stability, solubility, and inherent viscosity were studied.     

Novel thermally stable polyimides based on flexible diamine: synthesis, characterization, and properties

A novel diamine with built-in sulfone, ether, and amide structure was prepared via three-step reactions. Nucleophilic reaction of 4-aminophenol with 4-nitrobenzoyl chloride in the presence of propylene oxide led to preparation of N-(4-hydroxy phenyl)-4-nitrobenzamide (HPNB). The nitro group of this compound was reduced with hydrazine and Pd/C to afford 4-amino-N-(4-hydroxy phenyl)benzamide (AHPB). Two moles of AHPB were reacted with bis-(4-chloro phenyl)sulfone to provide a novel sulfone ether amide diamine (SEAD). All the prepared compounds were characterized by common spectroscopic methods. The prepared diamine (SEAD) used to prepare related polyimides by reaction with different aromatic dianhydrides. The obtained poly(sulfone ether amide imide)s were characterized and their properties were studied.     

ORGANOSOLUBLE,THERMALLY STABLE POLYAMIDES CONTAINING SULFONE AND SULFIDE UNITS

A new diamine containing sulfone,sulfide and amide groups was synthesized via a three-step reaction process. The nucleophilic substitution reaction of 4-aminothiophenol with 4-nitrobenzoyl chloride in the presence of propylene oxide (PO) afforded N-(4-mercaptophenyl)-4-nitrobenzamide(MPNB).The catalytic reduction of the nitro group in MPNB to amino group was accomplished by using Pd/C and hydrazine monohydrate to produce 4-amino-N-(4-mercapto phenyl)benzamide(AMPB).Reaction of two moles of AMPB with bis(...     

Aromatic poly(sulfone sulfide amide imide)s as new types of soluble thermally stable polymers

A new diamine monomer containing flexible sulfone, sulfide, and amide units was prepared via three steps. Nucleophilic chloro displacement reaction of 4‐aminothiophenol with 4‐nitrobenzoyl chloride in the presence of propylene oxide afforded N‐(4‐mercapto‐phenyl)‐4‐nitrobenzamide and subsequent reduction of the nitro intermediate led to 4‐amino‐N‐(4‐mercapto‐phenyl)benzamide. Two moles of this amino thiophenol compound was reacted with bis‐(4‐chloro phenyl)sulfone to provide a novel diamine monomer. The diamine was reacted with aromatic dianhydrides to form polyimides via a two‐step polycondensation method, formation of poly(amic acid)s, followed by chemical imidization. The resulting polymers were characterized and their physical properties including thermal behavior, thermal stability, solubility and inherent viscosity were studied. Copyright © 2007 John Wiley & Sons, Ltd.     

Synthesis and properties of organosoluble poly(amide‐imide)s with propeller‐shaped 1,1,1‐triphenylethane units in the main chain

A dicarboxylic acid {1,1‐bis[4‐(4‐trimellitimidophenoxy)phenyl]‐1‐phenylethane ( II )} bearing two performed imide rings was prepared from the condensation of 1,1‐bis[4‐(4‐aminophenoxy)phenyl]‐1‐phenylethane and trimellitic anhydride in a 1/2 molar ratio. A novel family of poly(amide‐imide)s with inherent viscosities of 0.83–1.51 dL/g was prepared by triphenyl phosphite‐activated polycondensation from the diimide‐diacid II with various aromatic diamines in a medium consisting of N‐methyl‐2‐pyrrolidinone (NMP), pyridine, and calcium chloride. Because the 1,1,1‐triphenylethane group of II was unsymmetrical, most of the resulting polymers showed an amorphous nature and were readily soluble in polar solvents such as NMP and N,N‐dimethylacetamide. All the soluble poly(amide‐imide)s afforded tough, transparent, and flexible films, which had tensile strengths ranging from 88 to 102 MPa, elongations at break from 6 to 11%, and initial moduli from 2.23 to 2.71 GPa. The synthesized poly(amide‐imide)s possessed glass‐transition temperatures from 250 to 287 °C. The poly(amide‐imide)s exhibited excellent thermal stabilities and had 10% weight losses from 501 to 534 °C under a nitrogen atmosphere. A comparative study of some corresponding poly(amide‐imide)s is also presented. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 775–787, 2001     

Synthesis and properties of poly(ether imide)s derived from 2,6-bis(3,4-dicarboxyphenoxy)naphthalene dianhydride and aromatic diamines

A new naphthalene unit-containing bis(ether anhydride), 2,6-bis(3,4-dicarboxyphenoxy)naphthalene dianhydride, was synthesized in three steps starting from the nucleophilic nitrodisplacement reaction of 2,6-dihydroxynaphthalene and 4-nitrophthalonitrile in N,N-dimethylformamide (DMF) solution in the presence of potassium carbonate, followed by alkaline hydrolysis of the intermediate bis(ether dinitrile) and subsequent dehydration of the resulting bis(ether diacid). High-molar-mass aromatic poly(ether imide)s were prepared using a conventional two-step polymerization process from the bis(ether anhydride) and various aromatic diamines. The intermediate poly(ether amic acid)s had inherent viscosities of 0.65–2.03 dL/g. The films of poly(ether imide)s derived from two rigid diamines, i.e. p-phenylenediamine and benzidine, crystallized during the thermal imidization process. The other poly(ether imide)s belonged to amorphous materials and could be fabricated into transparent, flexible, and tough films. These aromatic poly(ether imide) films had yield strengths of 104–131 MPa, tensile strengths of 102–153 MPa, elongation to break of 8–87%, and initial moduli of 1.6–3.2 GPa. The glass transition temperatures (T_g's) of poly(ether imide)s were recorded in the range of 220–277°C depending on the nature of the diamine moiety. All polymers were stable up to 500°C, with 10% weight loss being recorded above 550°C in both air and nitrogen atmospheres. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1657–1665, 1998     

Novel pyridine-based ether ester diamine and resulting thermally stable poly (ether ester amide)s

A novel pyridine-based ether ester diamine was prepared in three steps. Reaction of 1,5-dihydroxy naphthalene with 4-nitrobenzoyl chloride afforded 5-hydroxy-1-naphthyl-4-nitrobenzoate (HNNB). Reduction of nitro group resulted in preparation of an amino compound named 5-hydroxyl-1-naphthyl-4-aminobenzoate (HNAB). The diamine was synthesized by nucleophilic substitution reaction of 5-hydroxyl-1-naphthyl-4-aminobenzoate with 2,6-dichloropyridine in the presence of K₂CO₃. The obtained diamine was fully characterized and used to prepare novel thermally stable poly (ether ester amide)s via polycondensation reaction with different aromatic and aliphatic diacid chlorides. All the polymers were characterized and their physical and thermal properties were studied.     

Synthesis and properties of poly(ether imide)s derived from 2,7-bis(3,4-dicarboxyphenoxy)naphthalene dianhydride and various aromatic diamines

A naphthalene unit-containing bis(ether anhydride), 2,7-bis(3,4-dicarboxyphenoxy)naphthalene dianhydride, was prepared in three steps starting from the nucleophilic nitrodisplacement reaction of 2,7-dihydroxynaphthalene and 4-nitrophthalonitrile in N,N-dimethylformamide (DMF) solution in the presence of potassium carbonate followed by alkaline hydrolysis of the intermediate bis(ether dinitrile) and subsequent dehydration of the resulting bis(ether diacid). High-molar-mass aromatic poly(ether imide)s were synthesized using a conventional two-stage polymerization process from the bis(ether anhydride) and ten aromatic diamines. The intermediate poly(ether amic acid)s had inherent viscosities of 0.95–2.67 dL/g. The films of poly(ether imide)s derived from two rigid diamines, that is, p-phenylenediamine and benzidine, crystallized and embrittled during the thermal imidization process. The other poly(ether imide)s belonged to amorphous materials and could be fabricated into transparent, flexible, and tough films. These poly(ether imide) films had yield strengths of 91–115 MPa, tensile strengths of 89–136 MPa, elongation to break of 11–45%, and initial moduli of 1.7–2.2 GPa. The T_gs of poly(ether imide)s were recorded in the range of 222–256°C depending on the nature of the diamine moiety. All polymers were thermally stable up to 500°C, with 10% weight loss being recorded above 540°C in air and nitrogen atmospheres. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2281–2287, 1997     

Structure-property relations in heat resistant polyesters with built-in ether and imide units

A new pyridine-based diacid containing ether and imide units was synthesized via reaction of 5-amino-1-naphthol with 2,6-dichloropyridine in the presence of potassium carbonate in N-methyl-2-pyrrolidone (NMP), and subsequent reaction of the obtained diamine with 2 mol of trimellitic anhydride. A series of poly(ether imide ester)s was synthesized by the polycondensation reactions of the prepared diacid with different diols via high temperature solution polycondensation reaction method. All the products were fully characterized by common spectroscopic methods. The polymers were examined by elemental analysis, IR and ¹H NMR spectra, inherent viscosity, X-ray diffraction, DSC, TGA and DMTA and their properties were studied. Polymers showed high thermal stability and good solubility in polar aprotic solvents. The Structure-property relations of the polymers were also studied.     

Synthesis and characterization of aromatic poly(ether sulfone imide)s derived from sulfonyl bis(ether anhydride)s and aromatic diamines

Two sulfonyl group-containing bis(ether anhydride)s, 4,4′-[sulfonylbis(1,4-phenylene)dioxy]diphthalic anhydride ( IV ) and 4,4′-[sulfonylbis(2,6-dimethyl-1,4-phenylene)dioxy]diphthalic anhydride (Me- IV ), were prepared in three steps starting from the nucleophilic nitrodisplacement reaction of the bisphenolate ions of 4,4′-sulfonyldiphenol and 4,4′-sulfonylbis(2,6-dimethylphenol) with 4-nitrophthalonitrile in N,N-dimethylformamide (DMF). High-molar-mass aromatic poly(ether sulfone imide)s were synthesized via a conventional two-stage procedure from the bis(ether anhydride)s and various aromatic diamines. The inherent viscosities of the intermediate poly(ether sulfone amic acid)s were in the ranges of 0.30–0.47 dL/g for those from IV and 0.64–1.34 dL/g for those from Me- IV. After thermal imidization, the resulting two series of poly(ether sulfone imide)s had inherent viscosities of 0.25–0.49 and 0.39–1.19 dL/g, respectively. Most of the polyimides showed distinct glass transitions on their differential scanning calorimetry (DSC) curves, and their glass transition temperatures (T_g) were recorded between 223–253 and 252–288°C, respectively. The results of thermogravimetry (TG) revealed that all the poly(ether sulfone imide)s showed no significant weight loss before 400°C. The methyl-substituted polymers showed higher T_g's but lower initial decomposition temperatures and less solubility compared to the corresponding unsubstituted polymers. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1649–1656, 1998     

Synthesis,characterization, and thermal properties of novel arylene sulfone ether polyimides and polyamides

A new aromatic sulfone ether diamine was synthesized by nucleophilic aromatic substitution reaction of 5‐amino‐1‐naphthol with bis(4‐chlorophenyl) sulfone in the presence of potassium carbonate in a polar aprotic solvent. Polycondensation reactions of the obtained diamine with pyromellitic dianhydride (PMDA), benzophenonetetracarboxylic dianhydride (BTDA), and hexafluoroisopropylidene diphthalic anhydride (6FDA) resulted in preparation of thermally stable poly(sulfone ether imide)s. Poly(sulfone ether amide)s also were prepared by reaction of the diamine with terephthaloyl chloride (TPC) and isophthaloyl chloride (IPC). The prepared monomer and polymers were characterized by conventional methods. Physical and mechanical properties of polymers, including thermal stability, thermal behavior, solution viscosity, solubility behavior, and modulus, also were studied. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1487–1492, 2000     

New poly(ester amide ether amide)s from a novel flexible diamine and different diacid chlorides using TMSCl for in situ silylation

A novel flexible diamine with built-in ester, amide and ether groups named terephthalic acid bis(4-{2-[2-(2-amino ethoxy)ethoxy]ethyl carbamoyl}phenyl) ester (TABE), was synthesized via two steps. Nucleophilic reaction of 4-hydroxybenzoic acid with terephthaloyl chloride in the presence of NaOH yielded terephthaloyl bis (4-oxybenzoic) acid (TOBA). The diamine (TABE) was prepared via two direct and indirect methods. In the indirect method TOBA was converted to related diacid chloride and reacted with 1,8-diamino-3,6-dioxaoctane (DADO). Direct method was achieved through the reaction of TOBA with DADO via Yamazaki method. TOBA and TABE were fully characterized and TABE was used to prepare new poly(ester amide ether amide)s through polycondensation with different diacid chlorides in the presence of trimethylchlorosilane (TMSCl). The polymers were characterized using conventional methods and their physical properties including inherent viscosity, thermal behavior, thermal stability, crystallinity, and solubility were studied. The polymers showed good thermal stability and improved solubility.     

Novel thermally stable poly(sulfone ether ester imide)s

A novel sulfone ether ester diamine was prepared by a three-step method. Reaction of 1,5-dihydroxy naphthalene with 4-nitrobenzoyl chloride afforded 5-hydroxy-1-naphthyl-4-nitrobenzoate. Reduction of nitro group by iron powder and HCl resulted in preparation of 5-hydroxyl-1-naphthyl-4-aminobenzoate. Reaction of this compound (two moles) with bis (4-chlorophenyl) sulfone led to preparation of a novel sulfone ether ester diamine. Three novel aromatic poly(sulfone ether ester imide)s were synthesized by polycondensation reactions of the prepared diamine with aromatic dianhydrides. Conventional methods were used to characterize the structure of the monomer and polymers. Physical properties of the polymers were also studied. The polyimides showed high thermal stability.     

Synthesis of new amides of the <Emphasis Type="Italic">N</Emphasis>-methylpiperazine series

New carboxylic acid amides containing an N-methylpiperazine fragment were synthesized by reactions of 1-methylpiperazine or 3- and 4-(4-methylpiperazin-1-ylmethyl)aniline with 4-chlorobenzoyl chloride and of 4-methyl-3-nitroaniline with 4-(4-methylpiperazin-1-ylmethyl)benzoyl chloride or benzotriazol-1-yl 4-(4-methylpiperazin-1-ylmethyl)benzoate. 4-Chloro-N-[4-(4-methylpiperazin-1-ylmethyl)phenyl]benzamide reacted with imidazole, quinolin-5-amine, and 2-methylquinolin-5-amine to give substituted 4-amino-N-[4-(4-methylpiperazin-1-ylmethyl)phenyl]benzamides. 4-Methyl-3-nitrophenyl-4-methylpiperazin-1-yl-substituted benzamides were reduced with hydrazine hydrate over Raney nickel to obtain N-(3-amino-4-methylphenyl)-4-(4-methylpiperazin-1-ylmethyl)benzamide as key intermediate in the synthesis of antileukemic agent imatinib and its isomer with alternative position of the amide group, 4-[(3-amino-4-methylphenylamino)methyl]phenyl-(4-methylpiperazin-1-yl)methanone.     

Fluorinated polyamides and poly(amide imide)s based on 1,4‐bis(4‐amino‐2‐trifluromethylphenoxy)benzene,aromatic dicarboxylic acids,and various monotrimellitimides and bistrimellitimides: Syntheses and properties

A CF₃‐containing diamine, 1,4‐bis(4‐amino‐2‐trifluromethylphenoxy) benzene ( I ), was prepared from hydroquinone and 2‐chloro‐5‐nitrobenzotrifluoride. Imide‐containing diacids ( V _a–h and VI _a,b ) were prepared through the condensation reaction of amino acids, aromatic diamines, and trimellitic anhydride. Then, a series of soluble fluorinated polyamides ( VII _a–h ) and poly(amide imide)s ( VIII _a–h and X _a,b ) were synthesized from I with various aromatic diacids ( II _a–h ) and imide‐containing diacids ( V _a–h and VI _a,b ) via direct polycondensation with triphenyl phosphate and pyridine. The polyamides and poly(amide imide)s had inherent viscosities of 1.00–1.70 and 0.79–1.34 dL/g, respectively. All the synthesized polymers showed excellent solubility in amide‐type solvents such as N‐methyl‐2‐pyrrolidinone, N,N‐dimethylacetamide, and N‐dimethylformamide and afforded transparent and tough films via solvent casting. Polymer films of VII _a–h , VIII _a–h , and X _a,b had tensile strengths of 91–113 MPa, elongations to break of 8–40%, and initial moduli of 2.1–2.8 GPa. The glass‐transition temperatures of the polyamides and poly(amide imide)s were 254–276 and 255–292 °C, respectively, and the imide‐containing poly(amide imide)s had better thermal stability than the polyamides. The polyamides showed higher transparency and were much lighter in color than the poly(amide imide)s, and their cutoff wave numbers were below 400 nm. In comparison with isomeric IX _{c – h} , poly(amide imide)s VIII _c–h exhibited less coloring and showed lower yellowness indices. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3116–3129, 2004     

Development of Oligomeric Phthalonitrile Resins for Advanced Composite Applications

Phthalonitrile endcapped oligomers containing aromatic ether and imide linkages have been synthesized and characterized. The phthalonitrile terminated oligomers were prepared in two step (one spot) method by the reaction of an excess amount of pyromellitc dianhydride (PMDA) with aromatic diamines, in a N,N-dimethylacetamide (DMAc)/toluene solvent mixture to form anhydride terminated oligomeric intermediate that was terminated by the reaction with 4-(aminophenoxy) phthaloitrile. The average molecular weights of the prepared oligomers were determined by GPC analysis. The oligomeric phthalonitrile monomers have been converted to network polymers using 4,4'-diaminodiphenyl sulfone (DDS) (5.0 wt %) curing additive at elevated temperatures. Differential scanning calorimetric (DSC) analysis was used to follow the polymerization as the oligomeric phthalonitrile/diamine mixtures and prepolymers. An isothermal rheometric analysis was conducted to determine the complex viscosity of the prepolymers during polymerization reaction. Viscosity increases as a function of time due to crosslinking, which depends upon the concentration and reactivity of the curing agent. The TGA analysis of cured resins showed superior thermal and thermo-oxidative stability. The temperature of 10% weight loss from TGA are in the range of 498-511 °C in N₂ and 448–461 °C in air atmosphere. Char yield at 800 °C is 41.7–50.2% in air and 70.6–83.1% in N_2.     

Soluble and thermally stable polyamides bearing 1,1′-thiobis(2-naphthoxy) groups

A new-type of sulfide containing diacid (1,1′-thiobis(2-naphthoxy acetic acid)) was synthesized from 2-naphthol in three steps. Reaction of 2-naphthol with sulfur dichloride afforded 1,1′-thiobis(2-naphthol) (TBN). 1,1′-Thiobis(2-naphthoxy acetic ester) (TBNAE) was successfully synthesized by refluxing the TBN with methylcholoroacetate in the presence of potassium carbonate. The related diacid was synthesized by basic solution reduction of TBNAE. The obtained diacid was fully characterized and used to prepare novel thermally stable poly(sulfide ether amide)s via polyphosphorylation reaction with different aromatic diamines. The properties of these new polyamides were investigated and compared with similar polyamides. These polyamides showed inherent viscosities in the range of 0.39-0.87 dL g⁻¹ in N,N-dimethylacetamide (DMAc) at 30 °C and at a concentration of 0.5 g dL⁻¹. All the polyamides were readily soluble in a variety of polar solvents such as DMAc and tetrahydrofuran (THF). These polyamides showed glass transition temperature (T_g) between 241-268 °C. Thermogravimetric analysis measurement revealed the decomposition temperature at 10% weight loss (T₁₀) ranging from 441- 479 °C in argon atmosphere.     

New poly(amide–imide)s syntheses. XXIII. Synthesis and properties of poly(amide–imide)s derived from 4,4′‐[1,4‐phenylenebis(isopropylidene‐1,4‐phenyleneoxy)]dianiline and various bis(trimellitimide)s

A series of poly(amide–imide)s III_a–m containing flexible isopropylidene and ether groups in the backbone were synthesized by the direct polycondensation of 4,4′‐[1,4‐phenylenebis(isopropylidene‐1,4‐phenyleneoxy)]dianiline (PIDA) with various bis(trimellitimide)s II_a–m in N‐methyl‐2‐pyrrolidone (NMP) using triphenyl phosphite and pyridine as condensing agents. The resulting poly(amide–imide)s had inherent viscosities in the range of 0.80–1.36 dL/g. Except for those from the bis(trimellitimide)s of p‐phenylenediamine and benzidine, all the polymers could be cast from DMAc into transparent and tough films. They exhibited excellent solubility in polar solvents. The 10% weight loss temperatures of the polymers in air and in nitrogen were all above 495°C, and their T_g values were in the range of 201–252°C. Some properties of poly(amide–imide)s III were compared with those of the corresponding poly(amide–imide)s V prepared from the bis(trimellitimide) of diamine PIDA and various aromatic diamines. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 69–76, 1999     

Preparation and properties of new poly(amide‐imide)s based on 1,4‐bis(4‐trimellitimidophenoxy)naphthalene and aromatic diamines

A diimide dicarboxylic acid, 1,4‐bis(4‐trimellitimidophenoxy)naphthalene (1,4‐BTMPN), was prepared by condensation of 1,4‐bis(4‐aminophenoxy)naphthalene and trimellitic anhydride at a 1 : 2 molar ratio. A series of novel poly(amide‐imide)s (IIa–k) with inherent viscosities of 0.72 to 1.59 dL/g were prepared by triphenyl phosphite‐activated polycondensation from the diimide‐diacid 1,4‐BTMPN with various aromatic diamines (Ia–k) in a medium consisting of N‐methyl‐2‐pyrrolidinone (NMP), pyridine, and calcium chloride. The poly(amide‐imide)s showed good solubility in NMP, N,N‐dimethylacetamide, and N,N‐dimethylformamide. The thermal properties of the obtained poly(amide‐imide)s were examined with differential scanning calorimetry and thermogravimetry analysis. The synthesized poly(amide‐imide)s possessed glass‐transition temperatures in the range of 215 to 263°C. The poly(amide‐imide)s exhibited excellent thermal stabilities and had 10% weight losses at temperatures in the range of 538 to 569°C under a nitrogen atmosphere. A comparative study of some corresponding poly(amide‐imide)s also is presented. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1–8, 2000     

Capacites calorifiques de durcisseurs amines et resines epoxydes

Heat capacities of some amines (aniline, N-methyl aniline, meta-phenylene diamine, diamino diphenyl methane, diamino diphenyl sulfone and diamino diphenyl oxide) and two epoxy resins (phenyl glycidyl ether and diglycidyl ether of bisphenol A) have been determined in the solid and liquid states versus temperature. The heat capacity increments related to the functional groups have been evaluated compared to references like benzene, aniline and phenyl glycidyl ether.