Controlled synthesis and fluorescent properties of poly(9-(4-vinylbenzyl)-9H-carbazole) via nitroxide-mediated living free-radical polymerization

The functional polymer containing carbazole unit, [(poly(9-(4-vinylbenzyl)-9H-carbazole) (PVBK)], was successfully prepared via nitroxide-mediated living free-radical polymerization of 9-(4-vinylbenzyl)-9H-carbazole (VBK). The controlled features of the polymerization were confirmed by the linear increase in the molecular weight with the monomer conversion while keeping the relative narrow molecular weight distribution (M_w/M_n ? 1.51), and successful chain extension with styrene. The resulting polymer absorbed light in the 305-355 nm range and exhibited fluorescent emission at 350 nm. The fluorescent intensity of the polymer was lower than that of monomer and was affected by the properties of the different solvents, which decreased in the following order: DMF > THF > CHCl₃ at the same concentration of carbazole units. The fluorescence intensity of the polymer was apparently influenced by chromophore concentration, and the maximum value was obtained when the carbazole unit concentration was around 8 × 10⁻⁵ mol/L. Moreover, it was shown that the strong fluorescence of PVBK can be quenched by methyl acrylate (MA).     

Study on the polymerizations of methyl methacrylate and styrene initiated with chlorotrimethylsilane and CuCl/N,N,N′,N″,N″-pentamethyldiethyltriamine

Methyl methacrylate (MMA) and styrene (St) have been radically polymerized in the presence of chlorotrimethylsilane and CuCl/N,N,N′,N″,N″-pentamethyldiethyltriamine (Me₃SiCl/CuCl/PMDETA). An analysis of the resultant polymers by ¹H NMR discloses terminal silyl group and chlorine atom in all the obtained polymers. Kinetics studies have been carried out by measuring monomer conversions and polymer molecular weights against polymerization time. The results indicate that, for both MMA and St polymerizations, the monomer conversions exhibit a quasi-linear relationship with polymerization time, and the polymer number-average molecular weight (M_n) also increases with monomer conversion. The molecular weights of both PS and PMMA exceed one hundred thousand. Regardless of molecular weight, all the polymers show narrow molecular distributions (M_w/M_n = 1.2-1.5). These polymerization reactions are speculated to follow a mechanism similar to that of atom transfer radical polymerization (ATRP).     

Synthesis and photophysical behaviors of temperature/pH-sensitive polymeric materials. I. Vinyl monomer bearing 9-aminoacridine and polymers

A novel acrylic monomer bearing acridinyl group, acridine-9-N-acrylamide (Ac-9AA) was synthesized from 9-aminoacridine (9AA) and acryloyl chloride in the presence of triethylamine in dry dichloromethane (CCl₂) at room temperature. The synthesized Ac-9AA was identified by IR, MS and ¹H NMR spectra. Homopolymer of Ac-9AA was obtained using AIBN as a thermal initiator in THF under 65-70 °C and the average molecular weights (M_w) of poly(Ac-9AA) obtained was very low, being in the order of ca. 10³. Copolymer of Ac-9AA and acrylamide was synthesized with thermal initiator and poly(Ac-9AA-co-AM) was characterized by the method of IR, UV-vis and DSC. The photophysical behaviors of Ac-9AA and its polymers were explored by recording the fluorescence spectra in solution, solid and film. In addition, the pH and temperature dependence on fluorescence of the water-soluble poly(Ac-9AA-co-AM) were investigated in detail. The results showed that the relative fluorescence intensity of poly(Ac-9AA-co-AM) had an excellent linear response to temperature in the range of 0-60 °C. Moreover, the fluorescence intensity increased continuously from low pH to high pH while the excitation maxima at 388 nm and emission maxima at 400 nm had redshift after the addition of HCl or NaOH, which results from the fact that the predominance of tautomeric forms of Ac-9AA changed at different medium. This investigation may provide a convenient way to prepared multifunctional macromolecule biomaterial bearing aminoacridine to probe pH and temperature in biological system.     

Direct construction of silicon-silicon bond by using the low-valent titanium reagent

The reductive dimerization or polymerization of organochlorosilanes has been achieved by using the low-valent titanium reducing agent other than the alkali metals that are invariable used in the Wurtz-type coupling reaction. Applying this method, the corresponding disilanes or poly(methylvinylsilane) was obtained in good yields. The poly(methylvinylsilane) synthesized by this method is highly pure with a high molecular weight and a narrow molecular weight distribution (M_w/M_n = 1.6, M_n = 16,860).     

A new approach to prepare high molecular weight poly(p-dioxanone) by chain-extending from dihydroxyl terminated propolymers

As poly(p-dioxanone) (PPDO) with a high molecular weight (viscosity-average molecular weight (M_ν) > 100,000 g/mol) is not easy to be obtained in a short time, a new approach has been developed to produce high molecular weight poly(p-dioxanone) (HPPDO-T) by chain-extending reaction of hydroxyl-terminated PPDO (HPPDO) prepolymers using toluene-2,4-diisocyanate (TDI) as chain extender. Here HPPDO prepolymers were synthesized via ring-opening polymerization of p-dioxanone (PDO) monomer initiated by 1,4-butanediol (BD) with Stannous octoate (SnOct₂) as catalyst. The resulting polymers, having a highest M_ν of 250,000 g/mol, were characterized by ¹H NMR, TG, DSC and WXRD. HPPDO prepolymers can react with TDI more effectively than the PPDO prepolymers initiated by mono-functional initiators, and the molecular weights of resulting chain-extended products increase several decade times in an hour comparing to the prepolymers. The chain extended products HPPDO-T have better thermal stability, and higher glass transition temperatures and lower crystallization rates than PPDO homopolymer.     

Effect of hydrophilic macro-RAFT agent in surfactant-free emulsion polymerization

Here we report, synthesis of different molecular weight poly (styrene sulfonate) based macro-RAFT agents and their use as shell material in surfactant-free emulsion polymerization of styrene. Concentration and molecular weight of hydrophilic macro-RAFT agent has an influence on colloidal stability, particle size distribution and self-assembly. Microscopic and zeta-potential studies of colloids reveal that, the macro-RAFT agents used with low molecular weight (M_n = 1200) are comparable more efficient than high molecular weight (M_n = 46,800 and 116,000) for imparting narrow particle size distribution with good colloidal stability.     

Stereocontrol during photo-initiated controlled/living radical polymerization of acrylamide in the presence of Lewis acids

Poly(acrylamide) (PAM) with controlled molecular weight and tacticity was prepared by UV-irradiation-initiated controlled/living radical polymerization in the presence of dibenzyl trithiocarbonate (DBTTC) and Y(OTf)₃. The rapid and facile photo-initiated controlled/living polymerization at ambient temperature led to controlled molecular weight and narrow polydispersity (M_w/M_n = 1.12-1.24) of PAM. The coordination of Y(OTf)₃ with the last two amide groups in the growing chain radical effectively enhanced isotacticity of PAM. The isotactic sequence of dyads (m), triads (mm) and pentads (mmmm) in PAM were 70.32%, 50.95%, and 29.97%, respectively, which were determined by the resonance of methine (CH) groups in PAM under ¹³C NMR experiment. Factors affecting stereocontrol during the polymerization were studied, including the type of Lewis acids, concentration of Y(OTf)₃, and monomer conversion. It is intriguing that the meso tacticity increased gradually with chain propagation and quite higher isotacticity (m = 93.01%, mm = 86.57%) was obtained in the later polymerization stage (conversion 65-85%).     

Surface structure of thin asymmetric PS-b-PMMA diblock copolymers investigated by atomic force microscopy

Asymmetric poly(styrene-b-methyl methacrylate) (PS-b-PMMA) diblock copolymers of molecular weight M_n = 29,700 g mol⁻¹ (M_PS = 9300 g mol⁻¹M_PMMA = 20,100 g mol⁻¹, PD = 1.15, χ_PS = 0.323, χ_PMMA = 0.677) and M_n = 63,900 g mol⁻¹ (M_PS = 50,500 g mol⁻¹, M_PMMA = 13,400 g mol⁻¹, PD = 1.18, χ_PS = 0.790, χ_PMMA = 0.210) were prepared via reversible addition-fragmentation chain transfer (RAFT) polymerization. Atomic force microscopy (AFM) was used to investigate the surface structure of thin films, prepared by spin-coating the diblock copolymers on a silicon substrate. We show that the nanostructure of the diblock copolymer depends on the molecular weight and volume fraction of the diblock copolymers. We observed a perpendicular lamellar structure for the high molar mass sample and a hexagonal-packed cylindrical patterning for the lower molar mass one. Small-angle X-ray scattering investigation of these samples without annealing did not reveal any ordered structure. Annealing of PS-b-PMMA samples at 160 °C for 24 h led to a change in surface structure.     

Atom transfer radical polymerization of styrene initiated by triphenylmethyl chloride

Triphenylmethyl chloride (TPMCl) was employed for the first time as the initiator of atom transfer radical polymerization (ATRP) of styrene in the presence of CuCl/N,N,N′,N″,N″-pentamethyldiethylenetriamine (PMDETA) as catalyst and cyclohexanone as solvent. The kinetic plot was first-order with respect to monomer. A linear increase of number average molecular weight (M_n) vs. monomer conversion was observed, and the molecular weight distribution (MWD) was relatively narrow (M_w/M_n = 1.2-1.5). ¹H NMR spectra revealed the ω-Cl group at the chain end. Another two initiators, benzyl chloride (BzCl) and diphenylmethyl chloride (DPMCl), were also employed in contrast with triphenylmethyl chloride to investigate the influence of phenyl numbers on the polymerization.     

Modification effect of spherical zirconia with SiCl4 as a support of methylaluminoxane for heterogeneous single-site catalyst

Unmodified and SiCl₄-modified spherical zirconia-supported methylaluminoxane were used as cocatalyst for propylene polymerization as well as ethylene/1-hexene copolymerization in combined with Me₂Si(η³-C₁₃H₈)(η¹-N^tBu)TiMe₂ (1) at 0 °C. The modification with SiCl₄ improved the catalytic activity. The improvement was clearer in ethylene/1-hexene copolymerization than in propylene polymerization. The number average molecular weight (M_n) of polypropylenes increased linearly against the polymerization time regardless the cocatalyst used to give polymers with narrow molecular weight distribution (M_w/M_n < 1.32), indicating the living nature of the catalytic systems. Thus, propagation rate constant (k_p) and the number of active centers (C^*) were evaluated from M_n and the number of polymer-chains. When the zirconia was modified with SiCl₄, the k_p value decreased and the C^* increased. The latter effect was more significant to enhance the catalytic activity.     

Synthesis, characterization, and ethylene polymerization behavior of [(RR′-admpzp)2Ti(OPr)2] complexes (RR′-admpzp = 1-dialkylamino-3-(3,5-dimethyl-pyrazol-1-yl)-propan-2-olate)

[(RR′-admpzp)₂Ti(OPrⁱ)₂] complexes (2a-c), synthesized from reaction of Ti(OPrⁱ)₃Cl (0.5 equiv) with 1-dialkylamino-3-(3,5-dimethyl-pyrazol-1-yl)-propan-2-ol compounds in the presence of triethylamine (0.5 equiv), are pseudo-octahedral with each RR′-admpzp ligand κ²-O,N(pyrazolyl) coordinated to the titanium center. In solution, 2a-c adopt isomeric structures that are in dynamic equilibrium. At 23 °C, 2a-c/1000 MAO catalyst systems furnished high molecular weight polymers with narrow molecular weight distributions (M_w/M_n = 2.7-2.8). At 100 °C, 2a-c/MAO catalyst systems exhibited increased polymerization activity and 2c/1000 MAO system furnished high molecular weight polyethylene with a molecular weight distribution (M_w/M_n = 2.1) that is close to that found for single-site catalysts.     

Towards more controlled poly(n-butyl methacrylate) by atom transfer radical polymerization

The homogeneous controlled/‘living’ free radical polymerization of n-butyl methacrylate in toluene or o-xylene at 90 °C, in bulk and in solution, using the novel combination of the catalyst bis-triphenylphosphine iron(II)chloride tetrahydrate (FeCl₂ · 4H₂O(PPh₃)₂) with ethyl 2-bromoisobutyrate ((CH₃)₂CBrCO₂Et)) and α,α-dichloroacetophenone (CHCl₂COPh) as initiators has been investigated. The rate of polymerization initiated by the two initiators exhibited first-order kinetic with respect to the monomer. A linear increase of the number-average molecular weight (M_n) versus monomer conversion was observed for these systems. Among the two initiation systems, ethyl 2-bromoisobutyrate gave the fastest polymerization rate. A system with Fe³⁺ added at the beginning of the polymerization was examined and the lowest polydispersity (M_w/M_n∼1.2) was found when 10% Fe³⁺, relative to Fe²⁺ was added.     

A novel strategy for synthesis of amphiphilic π-shaped copolymers by RAFT polymerization

The amphiphilic π-shaped copolymers with narrow molecular weight distribution (M_w/M_n = 1.04-1.09) based on polystyrene (PSt) and poly(ethylene glycol) have been synthesized successfully. The reversible addition-fragmentation transfer (RAFT) polymerization of St in the presence of dibenzyl trithiocarbonate and N,N′-azobis(isobutyronitrile) (AIBN) yielded macro RAFT agent PSt-SC(S)S-PSt, subsequent reaction with excess maleic anhydride (MAh) at 80 °C in tetrahydrofuran afforded the PSt-MAh-SC(S)S-MAh-PSt. It was used as RAFT agent in the RAFT polymerization of St, and finally the amphiphilic π-shaped copolymers were obtained by the reaction of MAh with hydroxyl-terminated poly(ethylene glycol methyl ether) at 90 °C for 48 h. Their structures were confirmed by FT-IR and ¹H NMR spectra, and their molecular weight and molecular weight distribution were measured by gel permeation chromatography.     

Controlled/living cationic polymerization of styrene with BF3OEt2 as a coinitiator in the presence of water: Improvements and limitations

The controlled/living cationic polymerization of styrene using R-OH/BF₃OEt₂ (R-OH = 1-phenylethanol (1), 2-phenyl-2-propanol (2) and 1-(4-methoxyphenyl)ethanol (3)) at 0 °C in CH₂Cl₂ and in the presence of water was investigated. With 1/BF₃OEt₂, the poor control over molecular weight and molecular weight distribution was ascribed to a competitive protonic initiation induced by water. The molecular weight of the polymers obtained with 2/BF₃OEt₂ and 3/BF₃OEt₂ at low water content ([H₂O] ? 0.11 M) increased in direct proportion to the monomer conversion in agreement with the calculated values, assuming that one initiator molecule generates one polymer chain, but the molecular weight distribution was found relatively broad (M_w/M_n ∼ 1.8). ¹H NMR analyses confirmed that polymerization proceeds via reversible activation of C-OH terminus, but some loss of hydroxyl functionality was revealed. Some trials using high water contents in the recipe ([H₂O] ? 1.6 M) produced only traces of polymer due to catalyst decomposition.     

Poly(methylmethacrylate-dimethylsiloxane) triblock copolymers synthesized by transition metal mediated living radical polymerization: bulk and surface characterization

Well-defined poly(MMA-b-DMS-b-MMA) triblock copolymers were prepared by copper(I) mediated living radical polymerization. This was achieved by polymerization of methylmethacrylate (MMA) with different concentrations of 2-bromoisobutyrate terminated polydimethylsiloxane (PDMS). The polymerization occurred in controlled manner with the molecular weight found by ¹H NMR close to that predicted and a narrow molecular weight distribution (M_w/M_n∼1.2). Copolymers were obtained with M_n=2100, 4900, 10 100 and 29 500 g mol⁻¹ respectively with poly(MMA) (PMMA) terminal blocks and a central PDMS block of 5500 g mol⁻¹ in each case.DSC analysis showed most of the poly(MMA-b-DMS-b-MMA) triblock copolymers exhibits two T_g’s, one at low temperature corresponding to the T_g of PDMS microphase and a second at high temperature corresponding to the T_g of the PMMA microphase. TEM images show microphase segregation morphology in bulk for the triblock copolymers, with a higher degree of segregation for copolymers containing higher PDMS content. XPS measurements were performed to determine the chemical composition at the surface. For all the copolymers PDMS enrichment is observed at the surface. Copolymers containing higher percentage of PDMS exhibit higher phase separation and better enrichment of PDMS at the surface. The surface tension determined by contact angle measurements of the copolymer film containing 59 mol% of PDMS was 19.15 mN m⁻¹.     

Vinyl polymerization of norbornene catalyzed by a series of bis(β-ketoiminato)nickel (II) complexes in the presence of methylaluminoxane

A series of nickel complexes with β-ketoiminato ligands based on pyrazolone derivative were synthesized and characterized, which are highly active catalyst precursors for norbornene polymerization under mild reaction conditions through a vinyl-type polymerization mechanism. The catalytic activity could be up to 3.38 × 10⁷ g polymer/mol Ni h. The molecular weight distributions of the polynorbornenes (M_w/M_n = 2.05-2.56) indicate the presence of a single active species in the polymerization process.     

A versatile synthesis of poly(lauryl acrylate) using N-(n-octyl)-2-pyridylmethanimine in copper mediated living radical polymerization

A facile synthesis of poly(lauryl acrylate) has been achieved by atom transfer radical polymerization using benzyl-2-bromoisobutyrate, copper (I) bromide, and N-(n-octyl)-2-pyridylmethanimine (OPMI). The latter was of great interest as its synthesis was very easy to carry out and as it allowed the reaction mixture to be homogeneous, which was essential for the control of the reaction. The polymerization was controlled under these conditions and was optimized with the addition of copper (II) bromide as deactivator. We proved that the synthesis of poly(lauryl acrylates) with well defined molecular weights and narrow polydispersities was possible using a ligand which does not require difficult synthesis and purification. We also showed the ability of pyridylmethanimine ligands to control ATRP of an acrylate derivative. Best results were obtained at 130 °C in xylene for [Initiator]₀/[Cu(I)Br]₀/[Cu(II)Br₂]₀/[OPMI]/[lauryl acrylate] equal to 1/1/0.05/2.2/181, respectively (M_n = 19,942, DPI = 1.28).     

A facile approach to preparation of long-chain-branched poly(p-dioxanone)

Long-chain-branched poly(p-dioxanone)s (LCB-PPDOs) with different branch densities were prepared via the chain-extending reaction of hydroxyl group terminated linear bi-functional PPDO (2a-PPDO) and star-like tri-functional PPDO (3a-PPDO) prepolymers, which were synthesized by the ring-opening polymerization of p-dioxanone (PDO) using 1,4-butanediol (BD) and trimethylolpropane (TMP) as multi-functional initiators, respectively. The undesirable gelation was successfully depressed by adjusting the chain length and feed ratio of prepolymers. The average molecular weight between branch points (M_b) and the average number of branch per 100,000 g/mol (B_n) of LCB-PPDOs were calculated from the ¹H NMR spectra. The average number of branch ranged from 0 to 6.72 branch points per 100,000 g/mol, and the number-average molecular weights between branch points ranged from 6900 to 20,500 g/mol. The results of differential scanning calorimetry (DSC) showed that the crystallization behavior of LCB-PPDOs was changed evidently with the branch density. Small-amplitude dynamic oscillatory rheometer was used to investigate the rheological properties of the melts of LCB-PPDO including zero-shear viscosity, storage modulus, relaxation times and loss angle, which largely depended on the branch density and length of LCB-PPDOs. Therefore, the rheological behaviors of PPDO can be well-controlled via synthesizing LCB-PPDOs with the desired architectures.     

Kinetic and mechanistic study of the quasiliving cationic polymerization of styrene with the 2-phenyl-2-propanol/AlCl3 · OBu2 initiating system

The cationic polymerization of styrene with the 2-phenyl-2-propanol (CumOH)/AlCl₃ · OBu₂ initiating system at various dibutyl ether concentrations in a mixture of 1,2-dichloroethane and n-hexane (55:45 v/v) at −15 °C was investigated. The experimental results showed that an increase in dibutyl ether concentration leads to a noticeable decrease in the polymerization rate as well as to the more controlled polymerization in terms of molecular weight (M_n) and molecular weight distribution (MWD) evolutions. The kinetic investigation revealed that the polymerization proceeds in two stages. The first stage is characterized by high polymerization rate and slow initiation relative to propagation. During this stage molecular weight decreases or does not change and MWD increases with conversion. In the second stage considerably slower quasiliving polymerization of styrene occurs. The quasiliving nature of the styrene polymerization by the CumOH/AlCl₃ · OBu₂ system is proved and mechanistic scheme of the polymerization is proposed.     

Molecular weight characterization of poly[(R)-3-hydroxybutyrate] synthesized by genetically engineered strains of Escherichia coli

This study investigated the relationship of growth conditions, host strains and molecular weights of poly[(R)-3-hydroxybutyrate] [P(3HB)] synthesized by genetically engineered Escherichia coli. Various PHA synthases belonging to types I-IV enzymes were expressed in E. coli JM109 under the same experimental conditions, and the molecular weights of the polymers were characterized by gel permeation chromatography. The results demonstrate that P(3HB) polymers have varied molecular weights and polydispersities dependent on the characteristics of the individual PHA synthase employed. P(3HB) with high number-average molecular weights (M_n) [(1.5-4.0) × 10⁶] and narrow polydispersities (1.6-1.8) were synthesized by PHA synthases from Ralstonia eutropha (type I), Delftia acidovorans (type I) and Allochromatium vinosum (type III). Contrary to these, P(3HB) with relatively low M_n [(0.17-0.79) × 10⁶] and broad polydispersities (2.2-9.0) were synthesized by PHA synthases from Aeromonas caviae (type I), Pseudomonas sp. 61-3 (type II) and Bacillus sp. INT005 (type IV). Furthermore, the molecular weights of P(3HB) synthesized under various culture conditions, in various hosts of E. coli and by mutants of PHA synthase were characterized. It was found that, in addition to culture pH [Kusaka et al. Appl Microbiol Biotechnol 1997;47:140], other variances such as culture temperature, host strain and use of mutants are effective in changing polymer molecular weight.