Synthesis of telechelic methacrylic siloxanes with cycloaliphatic substituents groups for UV-curable applications

Methacrylic functionalized siloxanes were prepared in a two-step process. In the first step, a series of telechelic glycidyl epoxy siloxanes were prepared, substituted with either methyl, cyclopentyl, or cyclohexyl groups. In the second step, the telechelic glycidyl epoxy groups were reacted with methacrylic acid. The reaction was monitored via acid value, and when the acid value was ?10, the reaction was terminated. Characterization of the methacrylic telechelic siloxane polymers were performed using ¹H NMR, ¹³C NMR and FT-IR. The methacrylated siloxanes were formulated with a free radical photo-initiator, UV-cured, and the rate of polymerization was monitored via photo-differential calorimetry. After curing, viscoelastic properties, and oxygen-permeability were evaluated. In addition, X-ray was used to evaluate the structure of the cured films. The rate of polymerization was dependent on substituent and increased with increasing substituent size. The oxygen permeability was dependent on crosslink density, and increased with increasing substituent size. The increase in permeability, and thus free volume was supported by X-ray studies which showed an increase in d-spacing with increasing alkyl size.     

Synthesis and properties of liquid crystalline urethane methacrylates for dental composite applications

Three novel liquid crystalline methacrylates have been synthesized and characterized to be tested as comonomers in light‐curing dental resin‐based composites. The selected formulations consist of an alkylammonium or cholesteryl urethane methacrylate and 2,2‐bis[4‐(2‐hydroxy‐3‐methacryloyloxypropyl)phenyl]propane (BisGMA) or a BisGMA derivate modified with urethane methacrylate groups, further diluted with triethyleneglycol dimethacrylate (TEGDMA) and reinforced with 70% filler (zirconium silicate nanopowder, silanized filler). This study addresses the relationships between the LC monomer structure, photopolymerization rates (by differential scanning photo calorimetry), and specific properties of the dental resin composites (volumetric shrinkage, water sorption, water solubility, and hydrophobicity). The investigation of LC properties by differential scanning calorimetry and polarizing microscopy indicated that the LC mesophase is stable to room temperature (cationic monomers) or at 40 °C (cholesteryl methacrylate). It was found that the polymerization rate for LC urethane methacrylates used in combination with BisGMA/TEGDMA (0.122–0.136 s^?1) is higher than that of the mesogenic monomers alone (0.085–0.107 s^?1). The structures of the urethane monomers and, consequently, the viscosity of the comonomer mixture influence both the rate and the degree of conversion (44.8–67.5 %) of the photopolymerization process. Polymerization shrinkage measured by pycnometry showed lower values for LC monomers (3.25–3.43 vol %) comparatively with the monomer mixture (5.19–6.65 vol %). Preliminarily, the effect of ammonium groups from two resin composites incorporating alkylammonium structures (4.5 wt %) was tested on Streptococcus mutans, and distinct zone of inhibition was observed. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Micellization and Thermogelation of Poly(ether urethane)s Comprising Poly(ethylene glycol) and Poly(propylene glycol)

A series of multiblock poly(ether urethane)s comprising poly(ethylene glycol) (PEG), and poly(propylene glycol) (PPG) segments were synthesized. Their aqueous solutions exhibited thermogelling behavior at critical gelation concentrations (CGC) ranging from 8 to 12 wt%. The composition and structural information of the copolymers were studied by GPC and ¹H NMR. The critical micellization concentration (CMC) and thermodynamic parameters for micelle formation were determined at different temperatures. The temperature response of the copolymer solutions were studied and found to be associated with the composition of the copolymers.     

Synthesis of a fluoro-diol and preparation of fluorinated waterborne polyurethanes with high elongation at break

In this study, a fluoro-diol, trifluoroethyl-2-methylpropanoate-β-dihydroxy ethylamine (TFMDA), was successfully synthesized by Michael Addition reaction between trifluoroethyl-2-methacrylate (TFEMA) and diethanolamine (DEA). The chemical structures were characterized by FT-IR and ¹H NMR methods. And then by the reaction of dicyclohexylmethylmethane-4,4′- diisocyanate (HMDI), poly(propylene glycol) (PPG), 2,2-dimethylolbutanoic acid (DMBA), diethylene glycol (DEG) and trifluoroethyl-2-methylpropanoate-β-dihydroxyethylamine (TFMDA), fluorinated waterborne polyurethane emulsions with different content of COOH and TFMDA were successfully prepared. It was demonstrated that all the polyurethane emulsions exhibited enhanced storage stability and all the polyurethane films possessed high elongation at break and exceeded 1000%. Addition of organic fluorine obviously improved the water-resistance property of the waterborne polyurethane films.     

Preparation, characterization and curing properties of epoxy-terminated poly(alkyl-phenylene oxide)s

A series of dihydroxyl telechelic poly(alkyl-phenylene oxide)s (1) have been synthesized by oxidative polymerization of alkylphenols with various aromatic diols using manganese or copper amine catalysts. The novel telechelic derivatives (1) were epoxidized with epichlorohydrin yielding a series of new epoxidized poly(alkyl-phenylene oxide)s (EPPO, 2) and the structures, properties were studied by nuclear magnetic resonance spectroscopy (NMR), differential scanning calorimetry (DSC), thermo gravimetric analysis (TGA) and gel permeation chromatography (GPC). The 1:1 blends of diglycidyl ether of bisphenol-A (DGEBA) with EPPO resins were cured with three curing agents and the effects of chemical structure change on thermal property of the curing matrixes were discussed. Incorporation of EPPOs to DGEBA epoxy system resulted in a significant increase in its glass transition temperature (T_g), thermal stability and flame resistance. The T_g values and char yields arising from a DDM-cured epoxy resin are usually higher than those of dicyandiamide (DICY) or 2-methylimidazole (2-MI) analogues and the reactivity of epoxy blends with three curing agents presents an increase in the order of 2-MI, DDM and DICY. In general, the tetramethylbisphenol-A (TMBPA)-derived polymer exhibits the lowest T_g, char yield and dielectric constant among PPO derivatives whereas the biphenol polymers usually results in higher T_g and char yield due to its rigid rod structure.     

Synthesis of methacrylic copolymers with nona‐1‐butoxy trititanosiloxane as side groups and its application as a thermosetting resin

Methacrylic copolymers with a hydroxyl group on one end of the main chain and nona‐1‐butoxytrititanosiloxane as side groups (called methacrylic hybrid copolymers) were synthesized for use as baked‐finish‐type coating resins. The chemical structures of the side groups in the methacrylic hybrid copolymers were confirmed with the ash weight of the copolymers after combustion, the elemental ratio analysis of Si and Ti in the ash determined by inductively coupled plasma emission spectrometry, and the characteristic absorption band determined by Fourier transform infrared spectrophotometry. The methacrylic hybrid copolymers were cured at temperatures less than 150 °C in the absence of a curing accelerator. The cured copolymers exhibited a high thermal stability. The curing temperature of the copolymers was determined by the change in the absorption peak strength (peak area) of the 1655 cm⁻¹ band in the IR difference spectrum. The thermal stability of the copolymers was evaluated as the thermal‐degradation temperature measured by thermogravimetric analysis. The methacrylic hybrid copolymers were then be used as effective curing resins. The mixture, consisting of thermoplastic methacrylic terpolymer with hydroxyl and carboxyl groups and the methacrylic hybrid copolymers, were cured at less than 150 °C in the absence of a curing accelerator and exhibited a higher thermal‐degradation temperature than the copolymers. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1090–1098, 2001     

Studies on calcium‐containing poly(urethane ether)s

The calcium salt of mono(hydroxyethoxyethyl)phthalate [Ca(HEEP)₂] was synthesized by the reaction of diethylene glycol, phthalic anhydride, and calcium acetate. Calcium‐containing poly(urethane ether)s (PUEs) were synthesized by the reaction of hexamethylene diisocyanate (HMDI) or tolylene 2,4‐diisocyanate (TDI) with a mixture of Ca(HEEP)₂ and poly(ethylene glycol) (PEG₃₀₀ or PEG₄₀₀) with di‐n‐butyltin dilaurate as a catalyst. A series of calcium‐containing PUEs of different compositions were synthesized with Ca(HEEP)₂/PEG₃₀₀ (or PEG₄₀₀)/diisocyanate (HMDI or TDI) molar ratios of 2:2:4, 3:1:4, and 1:3:4 so that the coating properties of the PUEs could be studied. Blank PUEs without calcium‐containing ionic diols were also prepared by the reaction of PEG₃₀₀ or PEG₄₀₀ with HMDI or TDI. The PUEs were well characterized by Fourier transform infrared, ¹H and ¹³C NMR, solid‐state cross‐polarity/magic‐angle‐spinning ¹³C NMR, viscosity, solubility, and X‐ray diffraction studies. The thermal properties of the polymers were also studied with thermogravimetric analysis and differential scanning calorimetry. The PUEs were applied as top coats on acrylic‐coated leather, and their physicomechanical properties were also studied. The coating properties of PUEs, such as the tensile strength, elongation at break, tear strength, water vapor permeability, flexing endurance, cold crack resistance, abrasion resistance, color fastness, and adhesive strength, were better than the standard values. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2865–2878, 2003     

Synthesis and Characterization of UV-Curable Poly(dimethylsiloxane) Dimethacrylate

This paper presents a new route to the synthesis of UV-curable poly(dimethylsiloxane) dimethacrylate (PDMSDMA). PDMSDMA was essentially prepared by modification of poly(dimethylsiloxane), bis(3-aminopropyl) terminated (PDMS-NH₂) with methacrylic anhydride (MAA). The synthesized products were cured under UV in the presence of camphorquinone (CQ) used as a photoinitiator. The chemical structure of PDMSDMA samples was analyzed by FT-IR and ¹H-NMR spectroscopy. The ¹H-NMR spectrum of PDMSDMA revealed new peaks at 3.20 ppm, corresponding to methylene protons in  CH₂ NH , and 5.25 and 5.65 ppm, corresponding to vinylic protons in  NH CO CCH₃CH₂. The chemical structure of the cured products and the degree of curing were determined by solid state ¹³C CP/MAS NMR and FT-IR (Micro-ATR) spectroscopy. Various parameters, such as concentration of methacrylic anhydride, amount of camphorquinone, and curing time, were studied.     

Green polymer chemistry: Telechelic poly(ethylene glycol)s via enzymatic catalysis

This article reports our discovery that poly(ethylene glycol) (PEG) can quantitatively be functionalized by transesterification using Candida antarctica lipase B (Novozyme 435) as the catalyst. α‐ω telechelic PEG‐methacrylates and PEG‐acetates were successfully prepared using commercially available PEGs with both narrow and broad molecular weight distribution. ¹H and ¹³C NMR together with MALDI‐TOF mass spectroscopy verified the expected structures. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3024–3028, 2008     

Molecular architecture control in acrylic polymers by group transfer polymerization

The living polymerization of methacrylates by a repeated silyl Michael addition reaction (GTP)^a operates at room temperature and permits a high degree of molecular architecture control. Chelic, telechelic, block, comb, star, loop, and ladder polymers have been synthesized. For nucleophilic catalysts other than bifluoride, a dissociative mechanism is now proposed.     

Hydrogen bonding and rate enhancement in the photoinduced polymerization of telechelic urethane methacrylates based on a cycloaliphatic system: Tricyclodecane dimethanol

A new class of telechelic urethane methacrylic crosslinkers, based on a cycloaliphatic system (tricyclodecane dimethanol and tricyclodecane monomethanol), was synthesized. The synthesis was achieved by a two‐step condensation of 1,6‐hexamethylene diisocyanate or isophorone diisocyanate with tricyclodecane dimethanol and capping with hydroxyethyl methacrylate. Samples of hexanediol diacrylate, tricyclodecane monomethacrylate, and tricyclodecane dimethacrylate were used as non‐hydrogen‐bonding monomers for comparative studies of the curing kinetics. The photopolymerization of these telechelic systems was investigated with UV irradiation in the presence of 2,2‐diethoxy acetophenone as the photoinitiator, and the kinetics were followed by the monitoring of the double‐bond conversion at 815 cm^?1 with Fourier transform infrared spectroscopy. The hydrogen‐bonded crosslinkers had higher double‐bond conversions than their non‐hydrogen‐bonded counterparts under identical conditions. The higher cure rate could be explained by hydrogen‐bonding preassociation in these systems, which brought the methacrylate double bonds within close proximity. The temperature effects on the hydrogen bonding were also investigated. A decrease in the extent of the double‐bond conversion with increasing temperature was observed for the hydrogen‐bonded crosslinker, in contrast to an increased conversion with temperature for hexanediol diacrylate and tricyclodecane dimethacrylate. This was directly indicative of a reduction of hydrogen bonding at elevated temperatures leading to lower conversions. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4384–4395, 2006     

Synthesis of a novel methacrylic monomer iniferter and its application in surface photografting on crosslinked polymer substrates

(Methacryloyl ethylenedioxycarbonyl) benzyl N,N‐diethyldithiocarbamate (HEMA‐E‐In) was synthesized and used as a monomer iniferter to develop a novel, photopatternable grafting technology. This molecule functions as both a methacrylic monomer and a photoiniferter (photoinitiator–transfer agent–terminator). The structure of HEMA‐E‐In was characterized by ¹H NMR, Fourier transform infrared, and ultraviolet–visible spectroscopies. In the presence of the monomer iniferter, methyl methacrylate was polymerized by exposure to 365‐nm ultraviolet radiation, confirming the initiation capability of HEMA‐E‐In. After the copolymerization of HEMA‐E‐In into a methacrylate‐based polymer, attenuated total reflectance Fourier transform infrared spectra revealed that the photoiniferter functionality was present at the surface of this polymeric substrate. Photografting of poly(ethylene glycol) monomethacrylate monomer from the surface caused a significant change in the hydrophobicity of the surface as demonstrated by contact angle measurements. The novel monomer photoiniferter HEMA‐E‐In initiates the polymerization of bulk monomer and provides a reactive functionality that facilitates further initiation and polymer modification by the polymerization of different monomers. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1885–1891, 2002     

METHACRYLOYL DERIVITIZED HYPERBRANCHED POLYESTER. 1. SYNTHESIS,CHARACTERIZATION, AND COPOLYMERIZATION

Three hyperbranched multi-methacrylates (H20-MMA, H30-MMA and H40-MMA) have been synthesized by reacting Boltorn dendritic polyols with methacrylic anhydride and methacryloyl chloride. Their structures were characterized by FT-IR and NMR (¹H and ¹³C) and molecular weights were measured by GPC. These multi-methacrylates (H-MMAs) mixed well with a variety of monomers such as acrylic acid (AA), methacrylic acid (MA), methyl methacrylate (MMA), 2-hydroxy-ethyl methacrylate (HEMA), tri(ethylene glycol) dimethdimethacrylate (TEGDMA), and bisphenol A glycidyl dimethacrylate (BisGMA). The initial studies on thermal polymerization activities of 10% of H-MMAs with AA, MA, and MMA showed that they gave higher polymerization enthalpy than the corresponding homopolymerization. The resulting materials showed one glass transition temperature, indicating a typical single-phase resin. The H-MMAs can effectively copolymerize with AA, MA, and MMA, with essentially no homopolymers produced, as indicated by acetone extraction studies. This indicated that the hyperbranched multi-methacrylates have the potential to be used as crosslinking agents or modifiers with a number of monomers to produce new thermosets.     

Investigation of ultraviolet curable waterborne polyurethane acrylate dispersion based on hydroxyl-terminated polybutadiene

A new kind of ultraviolet (UV) curable waterborne polyurethane acrylate dispersion was synthesized based on hydroxyl-terminated polybutadiene (HTPB), poly-(propylene glycol) (PPG), isophorene diisocyanate (IPDI), 2-hydroxy ethyl acrylate (HEA) and dimethylol propionic acid (DMPA) after neutralizing by triethylamine (TEA). 2-Hydroxy-1-[4-2-hydroxyethoxy) phenyl]-2-methyl-1-propanone (Irgacure 2959) was used as a photoinitiator and deionized water as a diluent. Fourier transform infrared (FTIR) analysis was used to identify the chain structure of the UV-curable polyurethane prepolymer based on HTPB and the curing process. Effects of relative content of HTPB and PPG on emulsion stability, resistance to water and ethanol, thermal stability, compatibility of soft and hard segment, as well as the mechanical property of the cured film were investigated. Translated from Polymer Materials Science and Engineering, 2006, 22(3): 199–203 (in Chinese)     

Calcium‐containing poly(urethane‐urea)s: Synthesis,spectral, and thermal studies

A calcium salt of mono(hydroxypentyl)phthalate [Ca(HPP)₂] was synthesized by the reaction of 1,5‐pentanediol, phthalic anhydride, and calcium acetate. Four different bisureas such as hexamethylene bis(ω,N‐hydroxyethylurea), tolylene 2,4‐bis(ω,N‐hydroxyethylurea), hexamethylene bis(ω,N‐hydroxypropylurea), and tolylene 2,4‐bis(ω,N‐hydroxypropylurea) were prepared by reacting ethanolamine or propanolamine with hexamethylene diisocyanate (HMDI) or tolylene 2,4‐diisocyanate (TDI). Calcium‐containing poly(urethane‐urea)s (PUUs) were synthesized by reacting HMDI or TDI with 1:1 mixtures of Ca(HPP)₂ and each of the bisureas with di‐n‐butyltin dilaurate as a catalyst. The PUUs were well characterized by Fourier transform infrared spectroscopy, ¹H and ¹³C NMR, solid‐state ¹³C–cross‐polarization/magic‐angle spinning NMR, viscosity, solubility, elemental analysis, and X‐ray diffraction studies. Thermal properties of the polymers were also examined with thermogravimetric analyses and differential scanning calorimetry. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1809–1819, 2004     

含刚性链节和脲端基聚醚增韧剂改性环氧树脂的研究———反应活性及力学性能

合成了一系列既含环氧丙烷聚醚（ＰＰＧ）柔性间隔基、又含刚性介晶结构单元的端脲基活性改性剂（ＬＣＥＵＰＰＧ），并对其改性环氧树脂Ｅ ５１／双氰双胺（Ｅ ５１／ｄｉｃｙ）体系的固化反应活性、改性剂含量对增韧体系动态力学性能及冲击性能的影响进行了研究．结果表明：ＬＣＥＵＰＰＧ的加入对固化体系具有明显的增韧作用，冲击强度提高了３～７倍；其对Ｅ ５１／ｄｉｃｙ固化反应具有明显的促进作用，可使固化反应表观活化能（Ｅａ）降低５０～７０ＫＪ／ｍｏｌ、固化温度降低３０～４０℃；体系的玻璃化转变温度（Ｔｇ）略有下降，但模量基本不降低或略有升高；β 转变向低温方向移动．     

Synthesis, structure and mesomorphism of new cholesteric monomers and smectic comblike polymers

Seven new cholesteric monomers (M-1−M-7) and the corresponding smectic comblike polymers containing cholesteryl groups (P-1−P-7) were synthesized. The chemical structures and purity were characterized by FT-IR, ¹H NMR, and elemental analyses. The specific optical rotations were evaluated with a polarimeter. The mesomorphism was investigated by polarizing optical microscopy, differential scanning calorimetry, thermogravimetric analysis, and X-ray diffraction. The specific optical rotation values of these monomers and polymers with the same numbers of phenyl ring and terminal groups were nearly equal, however, they decreased with increasing the aryl numbers in the mesogenic core. M-1−M-7 showed oily streak texture and focal conic texture, or fingerprint texture, or spiral texture of cholesteric phase. P-1−P-7 showed the smectic A phase. The melting, clearing, and glass transition temperatures increased, and the mesophase temperature ranges widened with increasing the aryl number in the mesogenic core. Surprisingly, although the molecular structures of M-6 and M-7 were similar to those of M-4, namely the mesogenic cores contained three phenyl rings, their phase behavior had a considerable difference, and T_m and T_i of M-6 and M-7 were less than those of M-4. In addition, M-6 and M-7 also showed an obvious glass transition. TGA showed that all the polymers had good thermal stabilities.     

Poly(propylene glycol)‐based ammonium ionenes as segmented ion‐containing block copolymers

The synthesis and characterization of series of segmented poly(propylene glycol) (PPG)‐based ammonium ionenes is described. Bromine end‐capped oligomers were successfully synthesized using the reaction of 6‐bromohexanoyl chloride with 1000, 2000, and 4000 g/mol PPGs. ¹H NMR spectroscopy, titration studies, and matrix‐assisted laser desorption ionization‐time of flight (MALDI‐TOF) mass spectrometry revealed the difunctionality of the oligomers. First, a series of PPG‐based ammonium ionenes was synthesized from bromine end‐capped PPG oligomers and N,N,N′,N′‐tetramethyl‐1,6‐hexanediamine. For this series, a single glass transition temperature (T_g) of approximately ?66 °C was observed through differential scanning calorimetry (DSC); dynamic mechanical analysis (DMA) showed the onset of flow ranged from 20 to 80 °C. In addition, a series of PPG‐based ammonium ionenes containing 1,12‐dibromododecane was synthesized to increase the aliphatic hard segment (HS) content and enhance the mechanical properties of the resulting materials. For these, two T_g's were observed using DMA; DMA also showed the onset of flow of ionenes containing higher HS content (33 wt %) occurred in the range of 100–140 °C. Tensile analysis for these ionenes demonstrated an average tensile strength at break ranging from 0.2 to 2.4 MPa. Small angle X‐ray scattering (SAXS) profiles for these ionenes showed that Bragg distances increase linearly with the molecular weight of PPG soft segment. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 4159–4167, 2010     

Photocurable Fluorinated Methacrylates: Synthesis and Polymerization

A series of hydroxy fluoroalkyl methacrylates were synthesized in 50% yields by the esterification reaction of the methacryloyl chloride with fluoroalkyl diol. These fluorinated methacrylates undergo rapid photopolymerization using Igacure651 as a photoinitiator. Hydrogels were prepared from various molar ratios of 2-hydroxyethylmethacrylate (HEMA), ethylene glycol dimethacrylate and fluorine containing monomers with a photoinitiator. Analyzing the water contents and contact angles of the hydrogels, we found that the content of fluorinate monomers increased, water contents decreased and contact angles increased.