Synthesis and characterization of novel optically active poly(amide-imide)s via direct amidation

N,N′-Pyromelliticdiimido-di-l-methionine (3) was prepared from the reaction of pyromellitic dianhydride (1) with l-methionine (2) in glacial acetic acid and pyridine solution at refluxing temperature. The direct polycondensation reaction of the monomer diimide-diacid (3) with 1,3-phenylenediamine (4a), 1,4-phenylenediamine (4b), 2,6-diaminopyridine (4c), 3,5-diaminopyridine (4d), 4,4′-diaminodiphenylether (4e) and 4,4′-diaminodiphenylsulfone (4f) was carried out in a medium consisting of triphenyl phosphate, N-methyl-2-pyrolidone, pyridine and calcium chloride. The resulting poly(amide-imide)s having inherent viscosities 0.45-0.53 dl g⁻¹ were obtained in high yields and are optically active and thermally stable. All of the above compounds were fully characterized by IR spectroscopy, elemental analyses and specific rotation. Some structural characterization and physical properties of these new optically active poly(amide-imide)s are reported.     

Novel optically active poly(amide-imide)s from N,N-(4,4-carbonyldiphthaloyl)-bis-l-phenylalanine diacid chloride and aromatic diamines by microwave irradiation

3,3^′,4,4^′-benzophenonetetracarboxylic dianhydride (4,4^′-carbonyldiphthalic anhydride) (1) was reacted with l-phenylalanine (2) in a mixture of acetic acid and pyridine (3:2) and the resulting imide-acid [N,N^′-(4,4^′-carbonyldiphthaloyl)-bis-l-phenylalanine diacid] (4) was obtained in high yield. The compound (4) was converted to the N,N^′-(4,4^′-carbonyldiphthaloyl)-bis-l-phenylalanine diacid chloride (5) by reaction with thionyl chloride. A new facile and rapid polycondensation reaction of this diacid chloride (5) with several aromatic diamines such as 4,4^′-diaminodiphenyl methane (6a), 2,4-diaminotoluene (6b), 4,4^′-sulfonyldianiline (6c), p-phenylenediamine (6d), 4,4^′-diaminodiphenylether (6e), m-phenylenediamine (6f), benzidine (6g) and 2,6-diaminopyridine (6h) was developed by using a domestic microwave oven in the presence of a small amount of a polar organic medium such as o-cresol. The polymerization reactions proceeded rapidly, compared with the conventional solution polycondensation, and was completed within 7 min, producing a series of optically active poly(amide-imide)s with high yield and inherent viscosity of 0.22-0.52 dl/g. All of the above polymers were fully characterized by IR, elemental analyses and specific rotation. Some structural characterization and physical properties of this optically active poly(amide-imide)s are reported.     

Novel thermally stable and chiral poly(amide-imide)s bearing from N,N′-(4,4′-diphthaloyl)-bis-l-isoleucine diacid: Synthesis and characterization

Novel optically active aromatic poly(amide-imide)s (PAIs) were prepared from newly synthesized N,N′-(4,4′-diphthaloyl)-bis-l-isoleucine diacid (3) via polycondensation with various diamines. The diacid was synthesized by the condensation reaction of 3,3′,4,4′-biphenyltetracarboxylic dianhydride (1) with l-isoleucine (2) in a mixture of acetic acid and pyridine (3:2 v/v). All the polymers were obtained in quantitative yields with inherent viscosities of 0.20-0.43 dL g⁻¹. All the polymers were highly organosoluble in solvents like N-methyl-2-pyrrolidinone (NMP), N,N-dimethylacetamide (DMAc), N,N-dimethylformamide (DMF), dimethyl sulfoxide (DMSO), tetrahydrofuran, γ-butyrolactone, cyclohexanone and chloroform at room temperature or upon heating. These poly(amide-imide)s had glass transition temperatures between 198 and 231 °C, and their 10% weight-loss temperatures were ranging from 368 to 398 °C and 353 to 375 °C under nitrogen and air, respectively. The polyimide films had tensile strengths in the range of 63-88 MPa and tensile moduli in the range of 0.8-1.4 GPa. These poly(amide-imide)s possessed chiral properties and the specific rotations were in the range of −3.10° to −72.92°.     

Rapid synthesis of optically active poly(amide-imide)s by direct polycondensation of aromatic dicarboxylic acid with aromatic diamines

4,4^′-(Hexafluoroisopropylidene)-N,N^′-bis(phthaloyl-l-leucine-p-amidobenzoic acid) (2) was prepared from the reaction of 4,4^′-(hexafluoroisopropylidene)-N,N^′-bis(phthaloyl-l-leucine) diacid chloride with p-aminobenzoic acid. The direct polycondensation reaction of monomer (2) with p-phenylenediamine (2a), 4,4^′-diaminodiphenylsulfone (2b), 2,4-diaminotoluene (2c), 2,6-diaminopyridine (2d), m-phenylene diamine (2e), benzidine (2f), 4,4^′-diaminodiphenylether (2g) and 4,4^′-diaminodiphenyl methane (2h) was carried out in a medium consisting of triphenyl phosphite, N-methyl-2-pyrolidone, pyridine, and calcium chloride. The homogeneous mixture was heated at 220 °C for 1 min under nitrogen. The resulting poly(amide-imide)s (PAIs) having inherent viscosities 0.27-0.78 dl/g were obtained in high yield and are optically active and thermally stable. All of the above polymers were fully characterized by IR spectroscopy, elemental analyses and specific rotation. Some structural characterization and physical properties of this new optically active PAIs are reported.     

Microwave-promoted synthesis of new optically active poly(ester-imide)s derived from N,N-(pyromellitoyl)-bis-l-leucine diacid chloride and aromatic diols

Pyromellitic dianhydride (benzene-1,2,4,5-tetracarboxylic dianhydride) (1) was reacted with l-leucine (2) in a mixture of acetic acid and pyridine (3:2) and the resulting imide-acid [N,N^′-(pyromellitoyl)-bis-l-leucine diacid] (4) was obtained in quantitative yield. The compound (4) was converted to the N,N^′-(pyromellitoyl)-bis-l-leucine diacid chloride (5) by reaction with thionyl chloride. A new facile and rapid polycondensation reaction of this diacid chloride (5) with several aromatic diols such as phenol phthalein (6a), bisphenol-A (6b), 4,4^′-hydroquinone (6c), 1,8-dihydroxyanthraquinone (6d), 1,5-dihydroxy naphthalene (6e), 4,4-dihydroxy biphenyl (6f), and 2,4-dihydroxyacetophenone (6g) was developed by using a domestic microwave oven in the presence of a small amount of a polar organic medium such as o-cresol. The polymerization reactions proceeded rapidly and are completed within 10 min, producing a series of optically active poly(ester-imide)s (PEIs) with good yield and moderate inherent viscosity of 0.10-0.27 dl/g. All of the above polymers were fully characterized by IR, elemental analyses and specific rotation. Some structural characterization and physical properties of these optically active PEIs are reported.     

Preparation and properties of aromatic poly(amide-imide)s derived from N-[3,5-bis(3,4-dicarboxybenzamido)phenyl]phthalimide dianhydride

An imide ring-containing diamide-dianhydride, N-[3,5-bis(3,4-dicarboxybenzamido)phenyl]phthalimide dianhydride (1) was prepared by the reaction of trimellitic anhydride chloride with N-(3,5-diaminophenyl)phthalimide in a medium consisting of methylene chloride and pyridine. A series of new alternating aromatic poly(amide-imide)s having inherent viscosities of 0.26-0.37 dl/g was synthesized using a two-step poly(amic-acid) precursor method. A reference monomer, 1,3-bis(3,4-dicarboxybenzamido)benzene dianhydride (2) without the phthalimido pendant group attached to the polymer main chain was prepared in order to study the structure-property relationship. In this case, the structure effects on some properties of the resulting poly(amide-imide)s including crystallinity, solubility, thermal stability, and film flexibility could be easily clarified. A diamide-triimide (3) as a model compound was also synthesized by the reaction of new dianhydride 1 with aniline to compare the characterization data as well as to optimize the polymerization conditions. The resulting polymers were fully characterized by FT-IR, UV-visible and ¹H NMR spectroscopy. Most of the polymers showed an amorphous nature and were readily soluble in a variety of organic solvents such as N,N-dimethylacetamide (DMAc), N,N-dimethylformamide (DMF), dimethyl sulfoxide (DMSO), N-methyl-2-pyrrolidone (NMP), and pyridine. The glass-transition temperatures of these polymers were recorded between 301 and 371 °C. All polymers showed no significant weight loss below 500 °C in nitrogen, and the decomposition temperatures at 10 wt.% loss range from 506 to 543 °C. The films of the resulting poly(amide-imide)s could be cast from their NMP solutions, and the transparency and flexibility of them were investigated.     

Synthesis and characterization of new soluble and thermally stable poly(ester-imide)s derived from N-[3,5-bis(N-trimellitoyl)phenyl]phthalimide and various bisphenols

A new dicarboxylic acid chloride (2) bearing three preformed imide rings was synthesized by treating N-(3,5-diaminophenyl)phthalimide with trimellitic anhydride followed by refluxing with thionyl chloride. A novel family of aromatic poly(ester-imide)s with inherent viscosities of 0.27-0.35 dl g⁻¹ were prepared from 2 with various bisphenols such as resorcinol (3a), hydroquinone (3b), 2,2′-dihydroxybiphenyl (3c), 4,4′-dihydroxybiphenyl (3d), bisphenol-A (3e), 2,2′-dimethyl-4,4′-dihydroxybiphenyl (3f), 1,5-dihydroxynaphthalene (3g), 2,7-dihydroxynaphthalene (3h), and 2,2′-dihydroxy-1,1′-binaphthyl (3i) by high-temperature solution polycondensation in nitrobenzene using pyridine as hydrogen chloride quencher. All of the resulted polymers were fully characterized by FT-IR and NMR spectroscopy and elemental analyses. The poly(ester-imide)s exhibited excellent solubility in some polar organic solvents. From differential scanning calorimetry, the polymers showed glass-transition temperatures between 259 and 353 °C. Thermal behaviors of the obtained polymers were characterized by thermogravimetric analysis and the 10% weight loss temperatures of the poly(ester-imide)s were found to be in the range between 451 and 482 °C in nitrogen. Furthermore, crystallinity of the polymers was estimated by means of wide-angle X-ray diffraction.     

Synthesis and characterization of new soluble and thermally stable aromatic poly(amide-imide)s based on N-[3,5-bis(N-trimellitoyl)phenyl]phthalimide

A new dicarboxylic acid, N-[3,5-bis(N-trimellitoyl)phenyl]phthalimide (1a), bearing three preformed imide rings was synthesized from the condensation of N-(3,5-diaminophenyl)phthalimide and trimellitic anhydride in glacial acetic acid at 1:2 molar ratio. For study of structure-properties relationship 1,3-bis(N-trimellitoyl)benzene (1b, as a reference) was also synthesized in a similar manner. 1a and 1b were characterized by spectroscopic methods and elemental analyses.A series of wholly aromatic poly(amide-imide)s with inherent viscosities of 0.63-1.09 dl g⁻¹ was prepared by triphenyl phosphite-activated polycondensation from the triimide-dicarboxylic acid 1a and the reference monomer 1b with various aromatic diamines. All of the polymers were fully characterized by FT-IR and ¹H NMR spectroscopy. The effects of the phthalimide pendent group on the polymers properties such as solubility, crystallinity, and thermal stability were investigated by comparison of the polymers. The polymers obtained from triimide-dicarboxylic acid 1a exhibited excellent solubility in a variety of solvents such as N-methyl-2-pyrrolidone, N,N-dimethylacetamide, N,N-dimethylformamide, and dimethylsulfoxide. These poly(amide-imide)s possessed glass-transition temperatures from 334 to 403 °C and exhibited excellent thermal stabilities and had 10% weight losses from 541 to 568 °C under a nitrogen atmosphere. Poly(amide-imide)s containing phthalimide pendent groups showed higher solubility, higher T_g and T_d10% values than those having no phthalimide pendent groups.     

Synthesis of new substituted cyclopentadienyl titanium monomethoxydifluorides with BF3 · OEt2 as fluorinating reagent and their use in syndiotactic polymerization of styrene

Five substituted cyclopentadienyl titanium trimethoxide complexes, RCpTi(OMe)₃ (R=Me (2b), ⁱPr (2c), Me₃Si (2d), allyl (2e), PhCH₂ (2f)), were prepared. By reacting RCpTi(OMe)₃ with BF₃OMe₂, six RCpTiF₂(OMe) (R=H (3a), Me (3b), ⁱPr (3c), Me₃Si (3d), allyl (3e), PhCH₂ (3f)) were obtained. When activated with methylaluminoxane (MAO), the activities of RCpTiF₂(OMe) system were less than those of RCpTi(OMe)₃ system in solution polymerization of styrene, but the polymers made by RCpTiF₂(OMe) exhibited higher Mw and melting point than those by RCpTi(OMe)₃. Both systems produced polymers with similar syndiotacticities in the range 92.4-97.6%. Introduction of a substituent group into the Cp-ligand enhanced the melting points of the polymers, and meanwhile decreased the catalytic activities of RCpTi(OMe)₃/MAO and RCpTiF₂(OMe)/MAO systems, where the order of activity was RCp=Cp > MeCp > ⁱPrCp > Me₃SiCp > CH₂CHCH₂Cp > PhCH₂Cp. Complexes 2a (CpTi(OMe)₃) and 3a showed the highest activities respectively for both systems, and are three to four times more active than CpTiCl₃. In bulk polymerization, the difference of activities between RCpTi(OMe)₃/MAO and RCpTiF₂(OMe)/MAO systems became small, where complexes 2e and 3e exhibited remarkably higher activities compared with their solution polymerization activities. The maximum polymerization activities were found at the polymerization temperature of 50 °C for most of the complexes. The influence of the polymerization time (t_P), polymerization temperature (T_P) and Al/Ti ratio on the activities of complexes 2b and 3b were investigated. It was observed that the initial rate of propagation of complex 2b was higher than that of complex 3b and the highest activities of both catalysts were reached at the relatively low Al/Ti ratio of 150 and decrease for larger ratios.     

Microwave-assisted rapid synthesis of novel optically active poly(amide-imide)s containing hydantoins and thiohydantoins in main chain

Rapid and highly efficient synthesis of novel optically active poly(amide-imide)s (PAIs) 6(a-f) was achieved using microwave irradiation. These were made from the polycondensation reactions of 4,4^′-carbonyl-bis(phthaloyl-l-alanine) diacid chloride [N,N^′-(4,4^′-carbonyldiphthaloyl)] bisalanine diacid chloride 5 with six different derivatives of hydantoin and thiohydantoin compounds 4(a-f) in the presence of a small amount of a nonpolar organic medium that acts as a primary microwave absorber. Hydantoin and thiohydantoin derivatives 4(a-e) were synthesis from the reactions between benzil or benzil derivatives 3(a-e) with urea and thiourea. 5,5-Dimethylhydantoin 4f was synthesis from the reactions between acetone cyanohydrin 3f and ammonium carbonate. The polycondensation proceeded rapidly, and was completed within 10 min giving a series of PAIs with an inherent viscosity about 0.25-0.45 dL/g. The resulting PAIs 6(a-f) were obtained in a high yield and were optically active and thermally stable. All of the above compounds were fully characterized by means of Fourier transform infrared spectroscopy, elemental analyses, inherent viscosity (η_inh), solubility tests and specific rotation. Thermal properties of the PAIs 6(a-f) were investigated using thermal gravimetric analysis.     

Preparation,characterization and thermal degradation study of poly(amide imide)s based on tri-component mixture of PMDA/BTDA,diamines and acid chloride

A series of poly(amide imide)s (PAIs) having alternate (amide–amide) and (imide–imide) units (polymers 1–14 and 22–35), and random distribution of amide-imide linkages (polymers 15–21 and 36–42) were prepared by low temperature solution polymerization of benzene-1,2,4,5-tetracarboxylic dianhydride (PMDA)/benzophenone-3,3′,4,4′-tetracarboxylic dianhydride (BTDA), diamines (cyclic and aromatic) and acid chloride in dimethylforamide. All the polymers were readily soluble in polar aprotic solvents with inherent viscosities in the range of 0.134–0.878. The process of cycloimidization of poly(amide amic acid)s (PAAs) to PAIs was investigated by TGA and FT-IR techniques at four different temperatures i.e., 175, 200, 225, and 260 °C. The rate of cycloimidization was calculated by taking into account the theoretical weight loss (W_T), obtained from [n × M_w (H₂O)/M_w (R_U)] W, where M_w (H₂O) molecular weight of water, W weight of PAA taken for TGA, M_w (R_U) the molecular weight of repeat unit of PAA, n number of water molecules eliminated per repeat unit of PAA upon cycloimidization. For a particular diamine, the extent of percentage cycloimidization at the end of the isothermal heating was higher for PAAs containing trimellitic anhydride chloride (TMAc) unit, irrespective of the nature of the dianhydride and diamine. Thermal and thermooxidative degradation of PAIs was investigated by TGA in nitrogen and oxygen atmosphere. The initial decomposition temperatures (IDT) of polymers are above 260 °C, and vary widely (from 260 to 501 °C) depending upon the structure of the polymer backbone. PAIs containing TMAc exhibited higher thermal stability as compared to those polymers having diacid chloride units, in both N₂/O₂ atmospheres.     

Cyclopolymerization XXXIII. Radical polymerizations and copolymerizations of 1,6-dienes with 2-phenylallyl group and thermal properties of polymers derived therefrom

Radical polymerizations of α-allyloxymethylstyrene (1) and copolymerizations of α-(2-phenylallyloxy)methylstyrene (2) were undertaken to acquire comprehensive understanding on polymerization behavior of these dienes and to get polymers with high thermal stability and high glass transition temperature (T_g). One of the monofunctional counterparts of 1 is a derivative of α-methylstyrene, the ceiling temperature of which is low, and the other is an allyl compound that is well-known for the low homopolymerization tendency. This means that the intermolecular propagation reactions leading to pendant uncyclized units are suppressed during the polymerization of 1 to yield highly cyclized polymers. In fact, the degree of cyclization of poly(1) obtained at 140 °C attained the value 92%. Structural studies revealed that repeat cyclic units of poly(1) consist exclusively of five-membered rings. Poly(1) was found to be stable up to 300 °C, but its T_g values were detected at around 100 °C. They are considerably lower than the targeted values which should lie between 180 and 220 °C. An additional drawback of poly(1) is its low molecular weight probably due to a degradative chain transfer. For this reason, copolymerizations of 2 with 1 and with styrene were also carried out to seek for the possibility to control the thermal properties precisely. Monomer 2 was chosen, since it has been reported in our previous work that it yields polymers with thermal stability up to 300 °C and T_g higher than 250 °C. Copolymerization of 2 with styrene afforded polymers with desired thermal properties and high molecular weight.     

Syntheses, structures and catalytic activity of copper(II) complexes bearing N,O-chelate ligands

Copper complexes [Cu(Lⁿ)₂] 1-4 bearing N,O-chelating β-ketoamine ligands Lⁿ based on condensation products of 1-phenyl-3-methyl-4-benzoyl-5-pyrazolone with aniline (L¹), α-naphthylamine (L²), o-methylaniline (L³), and p-nitroaniline (L⁴), respectively, were synthesized and characterized by IR, ¹H NMR and X-ray crystallography (except 2). They were shown to catalyze the vinyl polymerization of norbornene when activated by methylaluminoxane (MAO). Both steric and electronic effects are important and influential factors contributing to the catalytic activity of the complexes with the order of 2 > 4 > 3 > 1.     

Colorless poly(ether-imide)s deriving from 2,2-bis[4-(3,4-dicarboxyphenoxy)phenyl]propane dianhydride(BPADA) and aromatic bis(ether amine)s bearing pendent trifluoromethyl groups

A series of poly(ether-imide)s (III) characterized by colorless, highly solubility was synthesized from 2,2-bis[4-(3,4-dicarboxyphenoxy)phenyl]propane dianhydride(BPADA) and various fluorinated aromatic diamines (I_a-h) in DMAc via polycondensation to form poly(amic acid) (II), followed by chemical (C) and thermal (H) imidization. These polymers had inherent viscosities ranging from 0.60 to 1.3 dL/g. These polyimides were highly soluble in a variety of organic solvent such as amide-type, ether-type and chlorinated solvents. Moreover, these poly(ether-imide) films were almost colorless, with an ultraviolet-visible absorption cutoff wavelength below 390 nm and low b* value (a yellowness index) of 4.6-18.0. The III series showed strength tensile of 72-101 MPa, elongation at break of 11-25%, initial modulus of 1.5-2.0 GPa. The glass transition temperature (T_g) of III_a-h were in the range of 202-267 °C, and the decomposition temperature above 493 °C and left 40-65% char yield at 800 °C in nitrogen. They had the lower dielectric constants of 3.39-3.72 (1 MHz) and moisture absorptions in the range of 0.11-0.40%.     

Chiroptical switching system based on the host-guest interaction between metal cations and poly(phenylacetylene)s bearing polycarbohydrate ionophore

Polycarbohydrate macromonomers with different degrees of polymerization (DP), that is, end-functionalized (1 → 6)-2,5-anhydro-3,4-di-O-ethyl-d-glucitols with 4-ethynylbenzoyl groups (macromonomer 2: DP = 6.6, and macromonomer 3: DP = 9.5) were synthesized. The copolymerizations of these macromonomers and phenylactylene (PA) were carried out in various molar ratios to give poly(phenylacetylene)s bearing a polycarbohydrate ionophore as the graft chain with various grafting rates, poly-(2_x-co-PA_y) and poly-(3_x-co-PA_y). These polymers showed split-type circular dichroism (CD) spectra in the long absorption region of the conjugated polymer backbones (280-500 nm). This indicated that poly-(2_x-co-PA_y) and poly-(3_x-co-PA_y) had predominantly one-handed helical conformations in the backbones. The CD spectral patterns of these polymers were inverted in the presence of metal cationic guest molecules. On the other hand, control experiments using poly(phenylacetylene)s bearing a monocarbohydrate (poly-(4_x-co-PA_y)) and metal cations did not show such a CD spectral inversion. These results clearly indicated that the chiroptical switching of the poly(phenylacetylene)s bearing polycarbohydrate ionophore was attributable to the host-guest complexation of the polycarbohydrate ionophore with metal cations.     

Banchromene and other secondary metabolites from the endophytic fungus Fusarium sp. obtained from Piper guineense inhibit the motility of phytopathogenic Plasmopara viticola zoospores

A new chromene, (S)-banchromene (1), together with seven known compounds, ergosterol, beauvericin (2), fusaproliferin (3), radicinin (4), poly(3-hydroxybutyric acid) (PHB, 5), N-methylpyrrolidone and an inseparable mixture of isochromene derivatives 6a, 6b, were isolated from a culture of Fusarium sp. strain CAMKT24b1, an endophytic fungus from the leaves and twigs of Piper guineense (Piperaceae). The structures of these metabolites were elucidated on the basis of their spectroscopic data; the absolute configuration of 1 was determined by ab initio-calculation of the optical rotation. In tests with the zoospores of the grapevine downy mildew pathogen Plasmopara viticola, compounds 1–4 showed moderate to high levels of motility-impairing activity at concentrations as low as 2.5 μg/mL. Compound 2 was the most active, exhibiting both motility-halting and lytic activities. Furthermore, compounds 2 and 3 displayed significant cytotoxic activity against brine shrimp larvae (Artemia salina) at 10 μg/mL. This is the first report on motility inhibitory and lytic activities of metabolites from an endophytic Fusarium species against the zoospores of the downy mildew pathogen P. viticola.     

Synthesis, characterization and fluorimetric studies of novel photoactive poly(amide-imide) from anthracene 9-carboxaldehyde and 4,4′-diaminodiphenyl ether by microwave irradiation

Trimellitic anhydride acid chloride (2) was obtained by the reaction of trimellitic anhydride (1) and excess amount of thionyl chloride. The acid chloride was reacted with 4,4′-diaminodiphenyl ether (3), and produced the monomer 4. Anthracene-9-carboxaldehyde (5) was reacted with sulfuryl chloride to produce anthracene-9-carboxylic acid chloride (6) in a quantitative yield. Through the reaction of 6 and 2,4,6-triamino-1,3,5-triazine (7), the monomer 8 was produced in high yield. Two monomers were characterized by ¹H NMR and FT-IR spectroscopy, and then were used in the polymerization reaction. A new facile and rapid polycondensation reaction of the two monomers was performed by using a domestic microwave oven. The polymerization reaction proceeded rapidly, compared with the conventional solution polycondensation and was completed within 10 min, producing a photoactive poly(amide-imide) in a quantitative yield. The resulting polymer was characterized by IR, ¹H NMR and TGA techniques. Thermogravimetric analysis indicated that polymer 9 was thermally stable in nitrogen atmosphere. In addition the initial decomposition temperature, 5% and 10% weight loss (T5, T10) were 284, 356 and 408 °C. The residual weight percent at 700 °C was 51.5%, which shows it is moderately thermally stable. Fluorescence properties of polymer 9 were investigated in several solvents. The ideal concentration of each case was determined by fluorescence self quenching phenomena. Also the self quenching mechanism was studied according to the specific behavior of the polymer in different solvents.     

Degradation and calcification in vitro of new bioresorbable terpolymers of lactides with an improved degradation pattern

Experimental implants produced from poly(l-lactide/?-caprolactone/glycolide) 80/10/10% (polymer 1), poly(l-lactide/dl-lactide/glycolide) 80/10/10% (polymer 2) and poly(l-lactide/dl-lactide/glycolide) 80/5/15% (polymer 3) were subjected to in vitro degradation in a buffer solution at 37 °C and pH = 7.4 and calcification in vitro was performed at 37 °C in a simulated body fluid for 4, 8, 12, 16, 24, 28, 32 and 36 weeks. In vitro degradation was performed in static and pseudodynamic modes. Samples from poly(l-lactide) were used as a control. The changes in the materials during the course of degradation were assessed from the measurements of molecular weight, mechanical properties and crystallinity. The changes in the appearance of the materials upon degradation and calcification were observed using a scanning electron microscope with an EDAX attachment. The decrease of molecular weight at 4 weeks was 66% for polymer 1, 56% for polymer 2 and 20% for polymer 3. Samples retained 55% of their bending strength at 4 weeks (polymer 1), 50% at 12 weeks (polymer 2) and 99% at 12 weeks (polymer 3). The bending modulus of polymer 3 remained practically unchanged during the first 12 weeks of degradation. Subsequently it increased by 44% at week 16 and remained unchanged up to 24 weeks and next decreased to 33% of the initial value at the end of the experiment at week 32. The bending modulus of polymer 2 decreased 35% at week 8 and subsequently increased to 44% of the initial value at week 16 and remained at this level until week 20. Next the modulus decreased to 84% of the initial value at week 24. The bending modulus of polymer 1 progressively decreased over the first 12 weeks of degradation to 40% of the initial value. The maximum crystallinity attained by the samples at the end of the experiments was 60% for polymer 1 and 38% for polymers 2 and 3. In the static mode the pH remained constant up to week 8 for polymer 1, week 20 for polymer 2 and week 28 for polymer 3. It decreased to 3.8 at weeks 12, 20 and 36 for polymers 1, 2 and 3, respectively. All the samples underwent calcification from week 16 of the experiments with the Ca/P ratio ranging from 0.92 to 1.20.     

Thermal hydrosilylation of olefin with hydrosilane. Preparative and mechanistic aspects

The reaction of trichlorosilane (1a) at 250 °C with cycloalkenes, such as cyclopentene (2a), cyclohexene (2b), cycloheptene (2c), and cyclooctene (2d), gave cycloalkyltrichlorosilanes [C_nH_2n−1SiCl₃: n = 5 (3a), 6 (3b), 7 (3c), 8 (3d)] within 6 h in excellent yields (97-98%), but the similar reactions using methyldichlorosilane (1b) instead of 1a required a longer reaction time of 40 h and afforded cycloalkyl(methyl)dichlorosilanes [C_nH_2n−1SiMeCl₂: n = 5 (3e), 6 (3f), 7 (3g), 8 (3h)] in 88-92% yields with 4-8% recovery of reactant 2. In large (2, 0.29 mol)-scale preparations, the reactions of 2a and 2b with 1a (0.58 mol) under the same condition gave 3a and 3b in 95% and 94% isolated yields, respectively. The relative reactivity of four hydrosilanes [HSiCl_3−mMe_m: m = 0-3] in the reaction with 2a indicates that as the number of chlorine-substituent(s) on the silicon increases the rate of the reaction decreases in the following order: n = 3 > 2 > 1 ? 0. In the reaction with 1a, the relative reactivity of four cycloalkenes (ring size = 5-8) decreases in the following order: 2d > 2a > 2c > 2b. Meanwhile linear alkenes like 1-hexene undergo two reactions of self-isomerization and hydrosilylation with hydrosilane to give a mixture of the three isomers (1-, 2-, and 3-silylated hexanes). In this reaction, the reactivity of the terminal 1-hexene is higher than the internal 2- and 3-hexene. The redistribution of hydrosilane 1 and the polymerization of olefin 2 occurred rarely under the thermal reaction condition.