Polymerization of N-(fluoro phenyl) maleimides

Poly(N-aryl maleimide)s of characteristic structures have been synthesized and some of their physical properties studied. These include N-(2-fluoro phenyl), N-(3-fluoro phenyl), N-(4-fluoro phenyl), N-(2,4-difluoro phenyl), N-(2,5-difluoro phenyl), N-(2,3,5,6-tetrafluoro phenyl), and N-(pentafluoro phenyl). The polymerization of N-(fluoro phenyl) maleimides by free-radical initiation in bulk or in solution and by anionic catalyst have been studied to compare the characteristics of polymerization by γ-ray irradiation with that by free-radical initiation. The polymers were characterized by elemental analysis, intrinsic viscosity, spectroscopy (IR and NMR), programmed thermogravimetric analysis, and x-ray diffraction. Spectra of polymers prepared by radiation and anionic polymerization were nearly identical with those of polymers prepared by free-radical polymerization initiated by AIBN in bulk or in solution and by the self-initiated thermal polymerization. A variety of reaction conditions were tried, but all attempts to change the molecular structure of the polymers were unsuccessful. Rates of thermal degradation for poly[N-(fluoro phenyl) maleimide]s have been analyzed by using a multiple-heating-rate procedure. Overall activation energy, order of reaction, and frequency factor have been evaluated. On the basis of the comparison between the overall activation energy of the thermal degradation of poly[N-(fluoro phenyl) maleimide]s and NMR spectra of their corresponding monomers, it can be concluded that the ¹H shifts due to ethylenic protons are so characteristic in sign and magnitude as to be useful in thermal stability elucidation. Some qualitative explanations were given on the stability of these polymers as affected by the type and size of the substituent. The x-ray diffractograms of all samples show two rather broad peaks indicative of noncrystalline structures. The location of the peaks does not depend upon preparation conditions and temperature. Poly(N-maleimide)s of fluoroanilines have not been hitherto described.     

Studies on photocrosslinking and flame‐retardant properties of chalcone‐based polyacrylamides

A photocrosslinkable polycyclic chalcone‐based acrylamide has been synthesized by Claisen–Schmidt condensation reaction and then polymerized via free radical polymerization technique using azobisisobutyronitrile (AIBN) as an initiator. The resulting polymers have been characterized by FT‐IR, ¹H‐NMR and ¹³C‐NMR analytic techniques. The molecular weights of the polymers were determined by gel permeation chromatography. The thermal properties of synthesized polymers were characterized by TGA analysis, and the obtained results show good thermal and thermo‐oxidative stability which is required for a negative photo resist. The high flame‐retardant properties are calculated from limiting oxygen index (LOI) values and are found to be 36.9 and 32.0 for naphthyl and anthryl chalcone‐based polymers, respectively. The experimentally determined LOI values of polymers (PMNPA and PAPA) are 34.3 and 30.2, respectively, and the values are closer to theoretically found LOI values. However, the cone calorimetry of flame‐retardant PMNPA only showed a slight decrease in peak of heat release rate (PHRR) and total heat release (THR) compared to PAPA but the ignition time (TTI) of PMNPA is slightly higher than PAPA. The photocrosslinking properties of the polymers were investigated by UV spectroscopy technique and were found that with the increase in number of aromatic rings, the rate of crosslinking decreases. Thus polyacrylamides are useful in photolithography technology as well as flame‐retardant property in electrical appliances. Copyright © 2015 John Wiley & Sons, Ltd.     

Functionalized monomers based on N-(4-hydroxy phenyl)maleimide

N-(4-Hydroxy phenyl)maleimide (HPMI) is functionalized with acryloyl, methacryloyl, allyl, propargyl and cyanate groups and the structures of the materials are characterized by FTIR, ¹H NMR and ¹³C NMR. Thermal curing behaviours of the monomers and thermal stabilities of the polymers are studied using thermal analysis. Introduction of polymerizable groups shifts the curing exotherm to low temperatures, and the curing behaviour is dictated by the polymerizable substituent present in the aromatic ring. Polymer from acryloyl-functionalized monomer shows the highest thermal stability (402 °C), whereas the highest char value (49 % at 700 °C) is noted for the polymer obtained from propargyl-functionalized monomer. Polymers derived from functionalization of HPMI with acryloyl and methacryloyl showed better thermal stabilities. Thermosets formed by the thermal polymerization of HPMI functionalized with propargyl and cyanate groups showed higher char values at 700 °C in nitrogen atmosphere.     

Novel Flame‐Retardant and Thermally Stable Poly(Amide‐imide)s Based on Bicyclo[2,2,2]oct‐7‐Ene‐2,3,5,6‐Tetracarboxylic Diimide and Phosphine Oxide in the Main Chain: Synthesis and Characterization

Six novel poly(amide‐imide)s PAIs 5a‐f were synthesized through the direct polycondensation reaction of six chiral N,N′‐(bicyclo[2,2,2]oct‐7‐ene‐tetracarboxylic)‐bis‐L‐amino acids 3a‐f with bis(3‐amino phenyl) phenyl phosphine oxide 4 in a medium consisting of N‐methyl‐2‐pyrrolidone (NMP), triphenyl phosphite (TPP), calcium chloride (CaCl₂) and pyridine. The polymerization reaction produced a series of flame‐retardant and thermally stable poly(amide‐imide)s 5a‐f with high yield and good inherent viscosity of 0.39–0.83 dLg^?1. The resultant polymers were fully characterized by means of FTIR, ¹H NMR spectroscopy, elemental analyses, inherent viscosity, specific rotation and solubility tests. Thermal properties and flame retardant behavior of the PAIs 5a‐f were investigated using thermal gravimetric analysis (TGA and DTG) and limited oxygen index (LOI). Data obtained by thermal analysis (TGA and DTG) revealed that these polymers show good thermal stability. Furthermore, high char yields in TGA and good LOI values indicated that resultant polymers exhibited good flame retardant properties. N,N′‐(bicyclo[2,2,2]oct‐7‐ene‐tetracarboxylic)‐bis‐L‐amino acids 3a‐f were prepared in quantitative yields by the condensation reaction of bicyclo[2,2,2]oct‐7‐ene‐2,3,5,6‐tetracarboxylic dianhydride 1 with L‐alanine 2a , L‐valine 2b , L‐leucine 2c , L‐isoleucine 2d , L‐phenyl alanine 2e and L‐2‐aminobutyric acid 2f in acetic acid solution. These polymers can be potentially utilized in flame retardant thermoplastic materials.     

Influence of oxidation state of phosphorus on the thermal and flammability of polyurea and epoxy resin

The focus of this study is an investigation of the effect of oxidation state of phosphorus in phosphorus-based flame retardants on the thermal and flame retardant properties of polyurea and epoxy resin. Three different oxidation states of phosphorus (phosphite, phosphate and phosphine oxide) additives, with different thermal stabilities at a constant phosphorus content (1.5 wt.%) have been utilized. Thermal and flame retardant properties were studied by TGA and cone calorimetry, respectively. The thermal stability of both polymers decreases upon the incorporation of phosphorus flame retardants irrespective of oxidation state and a greater amount of residue was observed in the case of phosphite. Phosphate was found to be better flame retardant in polyurea, whereas phosphite is suitable for epoxy resin. Phosphite will react with epoxy resin by trans-esterification, which is demonstrated by FTIR and ³¹P NMR. Further, TG–FTIR and XPS studies also provide information on flame retardancy of both polymers with phosphorus flame retardants.     

A Diels‐Alder/retro Diels‐Alder strategy to synthesize polymers bearing maleimide side chains

Polymers containing thiol‐reactive maleimide groups on their side chains have been synthesized by utilization of a novel methacrylate monomer containing a masked maleimide. Diels‐Alder reaction between furan and maleimide was adapted for the protection of the reactive maleimide double bond prior to polymerization. AIBN initiated free radical polymerization was utilized for synthesis of copolymers containing masked maleimide groups. No unmasking of the maleimide group was evident under the polymerization conditions. The maleimide groups in the side chain of the polymers were unmasked into their reactive form by utilization of retro Diels‐Alder reaction. This cycloreversion was monitored by thermo gravimetric analysis (TGA), differential scanning calorimetry (DSC), and ¹H and ¹³C NMR spectroscopy. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4545–4551, 2007     

L-glutamic acid as a versatile platform for rapid synthesis of functional polyesters via facile Passerini multicomponent polymerization

In this work, a series of polyesters with different functional side groups were successfully prepared by Passerini three-component polymerization (P-3CP) in “one-pot” from biorenewable l -glutamic acid (l -GA)-based monomers. First, the polymerization conditions including monomer feed ratios, solvents and comonomer were systematically studied using Boc-protected l -GA with adipaldehyde and tert-butyl isocyanide. Under the optimal polymerization conditions, a variety of N-substituted l -GA-based monomers as well as functional isocyanides were attempted in the P-3CP to produce polyesters with different functionalities. Moreover, it was found that after removal of pendant protecting groups, the obtained l -GA-based polyester degraded spontaneously into small molecules via 1,5-intramolecular cyclization between the pendant amine groups and the ester groups in polymer backbone. The structures and thermal properties of obtained polymers were determined by ¹H NMR, IR, SEC, MALDI-ToF-MS, DSC, and TGA measurements. Starting from biorenewable l -GA, this approach will provide a facile and straightforward route to produce functional and biodegradable polyesters, thus effectively expanding the range of biodegradable polymers.     

Bismaleimides chain-extended by imidized benzophenone tetracarboxylic dianhydride and their polymerization to high temperature matrix resins

Heat-resistant polymers were obtained by thermal polymerization of several bismaleimides or their substituted derivatives. The chain of the polymer precursors was extended by incorporation of imidized benzophenone tetracarboxylic dianhydride between the maleimide rings in order to impart a degree of flexibility in the polymers. The bismaleimides and their corresponding tetraamic acids were characterized by infrared (IR) and proton nuclear magnetic resonance (¹H-NMR) spectroscopy. The differential thermal analysis (DTA) thermograms of the monomers showed exotherms at 200–340°C attributed to the thermally induced polymerization reactions. The influence of different substituents in the maleic double bond on the curing temperature was investigated. The thermal stability of the cured resins was evaluated by thermogravimetric analysis (TGA) and isothermal gravimetric analysis (IGA). They were stable up to 367–433°C both in nitrogen and air atmosphere and afforded 57–68% char yield at 800°C under anaerobic conditions. The structure of the aromatic and aliphatic diamines utilized for imidization was correlated with the thermal stability of the cured resins. The bismaleimide derived from p-phenylenediamine gave the most heat-resistant resin because of its higher rigidity.     

Synthesis and characterization of thermally stable and flame retardant poly (benzoxazine-co-urethane) matrices

Abstract

The flame-retardant behavior of organic polymers is considered as very important criteria to utilize them in the form of coatings, encapsulants, sealants, and matrices for high performance industrial applications. A new type of poly (benzoxazine-co-urethane) (PBZ-co-PU) matrices have been developed using dimethylol benzoxazine monomers (BZM and BZE) and tris(p-isocyanatophenyl)thiophosphate (Desmodur) through A₂?+?B₃ approach followed by thermal curing. The molecular structure of developed PBZ-co-PU was confirmed by FT-IR spectra and their thermal stability and flame retardant behavior were studied by standard methods. Data obtained from TGA and DSC, indicate that the PBZ-co-PU possesses higher Tg, better thermal stability and LOI than those of neat PBZ. Further, it was also observed that among the two matrix systems (PBZ-co-PU-1 and PBZ-co-PU-2) studied, the PBZ-co-PU-1 based system exhibited higher T_g, thermal stability and flame retardant behavior than those of PBZ-co-PU-2.     

Preparation and Characterization of Homo‐ and Co‐Polymers of Some Vinyl Monomers via ATRP by Using Imine Macrocycle as Ligand

Imine macrocyclic ligand M₁ was involved in homo‐ and co‐polymerization of some vinyl monomers via atom transfer radical polymerization technique (ATRP). Hereby, vinyl acetate, styrene and methyl acrylate monomers were homopolymerized. On the other hand, they were involved in copolymerization with MMA. M₁∶CuBr∶initiator∶monomer percentages were 1∶2∶4∶400. ¹HNMR confirmed the structures of the resulting polymers. The thermal behaviors of some selected polymers were studied.     

Flame retardance and shrinkage reduction of polystyrene modified with acrylate-containing phosphorus and crosslinkable spiro-orthoester moieties

Styrene was radically copolymerized with a spiro-orthoester with an acrylate group (SOE-AC), and terpolymerized with SOE-AC and diethyl(methacryloyloxymethyl)phosphonate (DEMMP). This was done for several different feed ratios, to obtain polymers with spiro-orthoester moieties in the side chain. These polymers were then crosslinked with ytterbium triflate, as cationic initiator, via the double ring-opening polymerization. The thermal stability and fire retardant properties of these materials were evaluated by TGA and LOI. The DEMMP-containing polymers give materials which were significantly more flame retardant than the nonphosphorus-containing materials, as indicated by the LOI measurements. The volume changes measured upon crosslinking of the polymers were evaluated by density measurements with a gas pycnometer. In all the cases, expansion was observed. This indicates that SOE-AC is an effective monomer for crosslinkable polymers without volume changes.     

Bis(benzoxazine-maleimide)s as a novel class of high performance resin: Synthesis and properties

A new class of benzoxazine-containing monomers, namely bis(benzoxazine-maleimide)s, has been prepared from hydroxyphenylmaleimide, paraformaldehyde and various diamines. This series of difunctional maleimide benzoxazines has been difficult to synthesize using previously reported benzoxazine synthesis conditions. The structures of the monomers are confirmed by Fourier transform infrared spectroscopy (FTIR), ¹H and ¹³C nuclear magnetic resonance spectroscopy (NMR) and elemental analysis. Polymerization behavior of the monomers is studied by differential scanning calorimetry (DSC), showing two exotherms at different temperature ranges. The 1st exotherm is due to the combination of benzoxazine ring-opening polymerization and addition-polymerization of bismaleimide. FTIR is also used to investigate the polymerization process. The dynamic mechanical analyses (DMA) of the obtained polymers reveal the glass-transition temperatures as high as 289-307 °C. Thermogravimetric analyses (TGA) show the 5% weight loss temperatures ranging from 374 to 383 °C with char yield ranging from 55% to 62% at 800 °C in N₂ atmosphere.     

Thermal and optical properties of some phosphorus‐containing poly(1,3,4‐oxadiazole‐ester‐imide)s

A series of phosphorus‐containing poly(1,3,4‐oxadiazole‐ester‐imide)s was prepared by polycondensation reaction of an aromatic dianhydride, namely 1,4‐[2‐(6‐oxido‐6H‐dibenz<c,e><1,2>oxaphosphorin‐6‐yl)]‐naphthalene‐bis(trimellitate)dianhydride, with different aromatic diamines containing 1,3,4‐oxadiazole ring. A solution imidization procedure was used to convert quantitatively the poly(amic acid) intermediates to the corresponding polyimides. The chemical structures of the monomers and polymers were confirmed by Fourier transform infrared, ¹H NMR and ³¹P NMR spectroscopy. The polymers were easily soluble in polar solvents such as N‐methyl‐2‐pyrrolidone (NMP), N,N‐dimethylformamide and tetrahydrofuran. They exhibited good thermal properties having the decomposition temperature above 380°C and the glass transition temperature in the range of 201–232°C. Due to the presence of phosphorus the polymers gave high char yield in termogravimetric analysis, hence good flame retardant properties. Optical properties were analyzed in solution by using UV–vis and photoluminescence spectroscopy. Solutions of the polymers in NMP exhibited photoluminescence in the blue region. Copyright © 2010 John Wiley & Sons, Ltd.     

Synthesis of poly(Schiff-base)s by organometallic processes

Some new monomers with Schiff-base structures and bromine final atoms were obtained by combining condensation reactions of dialdehydes or diamines with p-bromoaniline or p-bromobenzaldehyde. The corresponding polymers were synthesized by Ni- or Pd-catalyzed polycondensation reactions in combination with 2,5-dihexylbenzene-1,4-diboronic acid. The new structures were characterized by spectral methods (¹H NMR, IR, UV-vis) as well as by thermal analyses (TGA, DSC).     

In situ synthesis of a novel transparent poly (methyl methacrylate) resin with markedly enhanced flame retardancy

A novel phosphorus‐containing monomer, (6‐oxido‐6H‐dibenzo[c,e][1,2]oxaphosphinin‐6‐yl)methyl acrylate (DOPO‐AA), is first synthesized and characterized by Fourier transform infrared spectra (FTIR), ¹H nuclear magnetic resonance (NMR) and ³¹P NMR. The monomer is then introduced into poly (methyl methacrylate) (PMMA) matrix via in situ copolymerization to produce a new PMMA based copolymer (PMMA/DOPO‐AA). From UV–vis spectra, microscale combustion calorimeter (MCC) and thermogravimetric analyses (TGA) results, the as‐fabricated PMMA/DOPO‐AA copolymers not only keep relatively high transparency, but also exhibit remarkable improvements in the flame retardancy and thermal stability, such as increased T_0.5 by 60.2°C and limited oxygen index (LOI) by 4.1, and decreased peak heat released rate (PHRR) by 34.7%. Thermal degradation behaviors investigated by real time Fourier transform infrared spectra (RTIR), char structure analysis studied by scanning electron microscope (SEM) and pyrolysis gaseous products studied by TGA coupled with FTIR (TGA‐FTIR) demonstrate that the catalytic charring function of DOPO‐AA in condensed phase and DOPO flame retardant systems in the gas phase are two key factors for the property enhancements. This work not only provides a promising flame‐retardant monomer for polymers, but also will stimulate more efforts on the development of DOPO‐containing flame‐retardant monomers. Copyright © 2015 John Wiley & Sons, Ltd.     

Novel high phosphorus content phosphaphenanthrene-based efficient flame retardant additives for lithium-ion battery

The novel phosphate derivatives of phosphaphenanthrene with high-density phosphorus were synthesized and used as flame retardant additives for Li-ion batteries. The structures of compounds were characterized by ¹H NMR, ¹³C NMR, ³¹P NMR, FT-IR, and HR-MS. The excellent thermal stability of compounds was ascertained by thermogravimetric analysis and differential scanning calorimetry. The compounds were added to conventional electrolytes as flame retardant additives and evaluated their ionic conductivity, electrochemical stability, self-extinguishing properties, and combustion performance. The results showed that the compound containing higher phosphorus content has efficient flame retardant properties.     

Kinetic studies of the decomposition of flame retardant containing high-impact polystyrene

The thermal decomposition of flame retardant free high-impact polystyrene (HIPS) and four HIPS samples containing brominated flame retardants has been studied using TGA at different heating rates between 2.5 and 10 K min⁻¹. Decabromodiphenyl ether (DPE) and decabromodibenzyl (DDB) were used as flame retardants, and two of the samples contained antimony trioxide (Sb₂O₃) synergist besides the brominated additives. The activation energies (E_A) and frequency factors (k₀) were calculated by the methods of Kissinger and Ozawa. A compensation effect was observed and used for the identification of changes in the degradation kinetics. In a third step, the kinetic model of the reaction was determined. Both Kissinger and Ozawa showed that the HIPS degraded with an E_A of 200 kJ mol⁻¹. The choice of the flame retardant had, however, little impact on the TGA plot. The addition of a flame retardant as well as the addition of Sb₂O₃ reduced the E_A. Fire retardant free HIPS degraded mainly by power-law kinetics, while the addition of a flame retardant caused the mechanism to change to a phase-boundary controlled mechanism after a weight loss of 80 wt%.     

Combustion properties and thermal degradation behavior of polylactide with an effective intumescent flame retardant

An intumescent flame retardant spirocyclic pentaerythritol bisphosphorate disphosphoryl melamine (SPDPM) has been synthesized and its structure was characterized by Fourier transformed infrared spectrometry (FTIR), ¹H and ³¹P nuclear magnetic resonances (NMR). A series of polylactide (PLA)-based flame retardant composites containing SPDPM were prepared by melt blending method. The combustion properties of PLA/SPDPM composites were evaluated through UL-94, limiting oxygen index (LOI) tests and microscale combustion calorimetry (MCC) experiments. It is found that SPDPM integrating acid, char and gas sources significantly improved the flame retardancy and anti-dripping performance of PLA. When 25 wt% flame retardant was added, the composites achieved UL-94 V0, and the LOI value was increased to 38. Thermogravimetric analysis (TGA) showed that the weight loss rate of PLA was decreased by introduction of SPDPM. In addition, the thermal degradation process and possible flame retardant mechanism of PLA composites with SPDPM were analyzed by in situ FTIR.     

s-Triazine containing flame retardant hyperbranched polyamines: Synthesis, characterization and properties evaluation

A s-triazine containing hyperbranched polyamine (HBPA) has been synthesized from cyanuric chloride and aromatic diamine, 4,4′-(1,4-phenylenediisopropylidene) bis-aniline by nucleophilic displacement polymerization technique using an A₂ + B₃ approach with high yield (>80%). The synthesized polymer has been characterized by ¹H NMR, ¹³C NMR, FT-IR spectroscopic studies, elemental analysis, solubility and measurement of solution viscosity. The thermogravimetric (TG) analysis and differential scanning calorimetric (DSC) studies indicate that the polymer is thermostable upto 290 °C without any decomposition and has glass transition temperature of 243 °C. The flame retardancy of the pure powder polymer and the blends with linear commercial polymers such as plasticized PVC and LDPE with this hyperbranched polymer were investigated by the measurement of limiting oxygen index (LOI) value. The results show that the polymer has self-extinguishing characteristic (LOI = 38) and acts as an effective flame retardant additive for the above linear base polymers. The synergistic effect of this hyperbranched flame retardant was observed with triphenyl phosphine oxide in the same base polymers. The flammability efficiency of the hyperbranched polyamine is also evaluated by help of thermogravimetric (TG) analysis. The heat aging and leaching in different chemical media did not influence the flame retardancy of the blends.     

Chemical oxidative polymerization of m-phenylenediamine and its derivatives using aluminium triflate as a co-catalyst

Aromatic diamine monomers, including m-phenylenediamine (mPD), 2-methyl-m-phenylenediamine (2Me-mPD), 4-methyl-m-phenylenediamine (4Me-mPD) and trimethyl-m-phenylenediamine (tMe-mPD), were polymerized by chemical oxidation using ammonium persulfate as an oxidant. Aluminium triflate (Al(OTf)₃) was also used for the first time as a co-catalyst under various polymerization conditions. The polymerization yield was improved when Al(OTf)₃ was introduced to the polymerization reaction for most polymers. The poly(2-methyl-m-phenylenediamine) (P(2Me-mPD)), poly(4-methyl-m-phenylenediamine) (P(4Me-mPD)) and poly(trimethyl-m-phenylenediamine) (P(tMe-mPD)) polymers exhibited better solubility than poly(m-phenylenediamine) (P(mPD)) polymers in most common solvents. The homopolymers obtained were characterized by FT-IR, ¹H and ¹³C NMR, WAXD and TGA. The results showed that the yield, solubility and structure of the polymers are significantly dependent on the polymerization conditions. TGA measurements indicated that the polymers have good thermal stability and decompose above 400 °C in nitrogen.