Synthesis, characterization, and ethylene polymerization behavior of [(RR′-admpzp)2Ti(OPr)2] complexes (RR′-admpzp = 1-dialkylamino-3-(3,5-dimethyl-pyrazol-1-yl)-propan-2-olate)

[(RR′-admpzp)₂Ti(OPrⁱ)₂] complexes (2a-c), synthesized from reaction of Ti(OPrⁱ)₃Cl (0.5 equiv) with 1-dialkylamino-3-(3,5-dimethyl-pyrazol-1-yl)-propan-2-ol compounds in the presence of triethylamine (0.5 equiv), are pseudo-octahedral with each RR′-admpzp ligand κ²-O,N(pyrazolyl) coordinated to the titanium center. In solution, 2a-c adopt isomeric structures that are in dynamic equilibrium. At 23 °C, 2a-c/1000 MAO catalyst systems furnished high molecular weight polymers with narrow molecular weight distributions (M_w/M_n = 2.7-2.8). At 100 °C, 2a-c/MAO catalyst systems exhibited increased polymerization activity and 2c/1000 MAO system furnished high molecular weight polyethylene with a molecular weight distribution (M_w/M_n = 2.1) that is close to that found for single-site catalysts.     

Syntheses and catalytic activities of Group 4 metal complexes derived from C(cage)-appended cyclohexyloxocarborane trianion

The reaction of Li[closo-1-Me-1,2-C₂B₁₀H₁₀] with cyclohexene oxide produced closo-1-Me-2-(2′-hydroxycyclohexyl)-1,2-C₂B₁₀H₁₀ (1) in 86% yield. Decapitation of (1) with potassium hydroxide in refluxing ethanol gave the corresponding cage-opened potassium salt of the carborane anion, [nido-1-Me-2-(2′-hydroxycyclohexyl)-1,2-C₂B₉H₁₀]⁻ (2) in 82% yield. Deprotonation of (2) with two equivalents of n-butyllithium in THF at −78 °C, followed by its further reaction with anhydrous MCl₄ · 2THF (M = Ti, Zr) produced the corresponding d⁰-half-sandwich metallacarboranes, closo-1-M(Cl)-2-Me-3-(2′-σ-O-cyclohexyl)-η⁵-2,3-C₂B₉H₉ (3 M = Zr; 4 M = Ti), in 59% and 51% yields, respectively. Reaction of Li[closo-1,2-C₂B₁₀H₁₁] with Merrifield’s peptide resin (1%) in refluxing THF gave the ortho-carborane-functionalized polymer (5) in 88% yield. The corresponding closo-1-polystyryl-2-(2′-hydroxycyclohexyl)-1,2-C₂B₁₀H₁₀ (6) was produced in 94% yield by refluxing a mixture of the lithium salt of (5) and cyclohexene oxide in THF for 2 days. Compound (6) was decapitated, deprotonated and then reacted with ZrCl₄ · 2THF to produce a polymer-supported d⁰-half-sandwich metallacarborane closo-1-Zr(Cl)-2-polystyryl-3-(2′-σ-O-cyclohexyl)-η⁵-2,3-C₂B₉H₉ (7) in 41% yield. Compounds (3) and (7), in the presence of MMAO-7 (13% ISOPAR-E), were found to catalyze the polymerization of ethylene and vinyl chloride in toluene to give high molecular weight PE (9.4 × 10³ (M_w/M_n = 1.8)) and PVC (2.1 × 10³ (M_w/M_n = 1.6)), respectively.     

Synthesis and characterization of phosphorous-bridged bisphenoxy titanium complexes and their application to ethylene polymerization

Phosphorous-bridged bisphenoxy titanium complexes were synthesized and their ethylene polymerization behavior was investigated. Bis[3-tert-butyl-5-methyl-2-phenoxy](phenyl)phosphine tetrahydrofuran titanium dichloride (4a) was obtained by treatment of 3 equiv of n-BuLi with bis[3-tert-butyl-2-hydroxy-5-methylphenyl](phenyl)phosphine hydrochloride salt (3a) followed by TiCl₄(THF)₂ in THF. THF-free complexes 5a-5d were synthesized more conveniently by the direct reaction of MOM-protected ligands (2a-2d) with TiCl₄ in toluene. X-ray analysis of 4a revealed that the ligand is bonded to the octahedral titanium (IV) center in a facial fashion and two chlorine atoms possess cis-geometry. Complexes 4a and 5a-5d were utilized as catalyst precursors for ethylene polymerization. Complex 5c gave high molecular weight polyethylene (M_w = 1,170,000, M_w/M_n = 2.0) upon activation with Al(ⁱBu)₃/[Ph₃C][B(C₆F₅)₄] (TB). Ethylene polymerization activity of 5d activated with Al(ⁱBu)₃/TB reached 49.0 × 10⁶ g mol (cat) ⁻¹ h⁻¹.     

Vinyl addition polymerization of norbornene catalyzed by β-iminoamine Ni(II) complexes/methylaluminoxane systems

Two nickel(II) complexes (A and B) bearing β-iminoamine ligands, [2-(ArNCH)-C₆H₄-NMe₂] (La, Ar = 2,6-i-Pr₂C₆H₃; Lb, Ar = 2,6-Me₂C₆H₃), were synthesized and characterized by elemental analyses and ¹H NMR. X-ray crystal structure of complex B reveals that the six-membered chelate ring adopts a envelope conformation, with nickel(II) atom deviating from the plane of backbone aromatic ring by 1.164 Å. In the presence of methylaluminoxane (MAO), both complexes showed moderate activities of 10⁵ g mol_Ni⁻¹ h⁻¹ for norbornene polymerization. β-iminoamine Ni(II)/MAO catalysts gave unimodal polymers (M_w, 3.16-8.02 × 10⁵ g/mol) with a relatively narrow MWD (M_w/M_n, 1.59-2.14), indicative of single-site catalyst behavior. The obtained polymers are vinyl-type polynorbornenes (PNBs), which are soluble in common solvents such as toluene, cyclohexane and dichlorobenzene.     

Controlled/living cationic polymerization of styrene with BF3OEt2 as a coinitiator in the presence of water: Improvements and limitations

The controlled/living cationic polymerization of styrene using R-OH/BF₃OEt₂ (R-OH = 1-phenylethanol (1), 2-phenyl-2-propanol (2) and 1-(4-methoxyphenyl)ethanol (3)) at 0 °C in CH₂Cl₂ and in the presence of water was investigated. With 1/BF₃OEt₂, the poor control over molecular weight and molecular weight distribution was ascribed to a competitive protonic initiation induced by water. The molecular weight of the polymers obtained with 2/BF₃OEt₂ and 3/BF₃OEt₂ at low water content ([H₂O] ? 0.11 M) increased in direct proportion to the monomer conversion in agreement with the calculated values, assuming that one initiator molecule generates one polymer chain, but the molecular weight distribution was found relatively broad (M_w/M_n ∼ 1.8). ¹H NMR analyses confirmed that polymerization proceeds via reversible activation of C-OH terminus, but some loss of hydroxyl functionality was revealed. Some trials using high water contents in the recipe ([H₂O] ? 1.6 M) produced only traces of polymer due to catalyst decomposition.     

Synthesis and crystal structures of boratranes with methyl substituents on the atrane cage

Three monomeric boratranes B[(OCH₂CH₂)_nN(CH₂CMe₂O)_3−n] (n = 0, 1; n = 1, 2; n = 2, 3) have been synthesized by the reaction of B(OMe)₃ with a series of triethanolateamines such as [(OCH₂CH₂)_nN(CH₂CMe₂O)_3−n]³⁻ (n = 0, L1; n = 1, L2; n = 2, L3), where the number of CMe₂ groups adjacent to the OH functionality varied from 3 (L1H₃) to 2 (L2H₃) to 1 (L3H₃). These boratranes 1-3 have been characterized by solution ¹H, ¹³C{¹H} and ¹¹B NMR, and the crystal structures of 1 and 2 have been determined by single crystal X-ray diffraction.     

Selective synthesis of monomeric or dimeric titanatranes via fine tuning in triethanolateamine ligand

Monomeric titanatrane i-PrOTi(OCMe₂CH₂)₃N (1) and dimeric titanatranes [i-PrOTi(OCH₂CH₂)_nN(CH₂CMe₂O)_3−n]₂ (n = 1, 2; n = 2, 3) were synthesized by the reaction of Ti(O-i-Pr)₄ with a series of triethanolateamines such as (OCH₂CH₂)_nN(CH₂CMe₂O)_3−n³⁻ (n = 0, Lig¹; n = 1, Lig²; n = 2, Lig³), which vary by the number of CMe₂ groups adjacent to a OH functionality from 3 (Lig¹H₃) to 2 (Lig²H₃) to 1 (Lig³H₃). The resultant titanatranes 1–3 have been characterized by solution ¹H and ¹³C{¹H} NMR and their solid state structures have been determined by X-ray crystallography. Whereas compound 1 is monomeric in the solid state, compounds 2 and 3 are dimeric, due to the reduction of the steric congestion in the vicinity of the Ti.     

Synthesis and X-ray diffraction analysis/crystal structure of new germatranes containing methyl substituents in three five-membered chelating rings

Three monomeric germatranes, 1-isopropoxy-3,3,7,7,10,10-hexamethyl-2,8,9-trioxa-5-aza-1-germatricyclo[3.3.3.0^1,5]undecane (1), 1-isopropoxy-3,3,7,7-tetramethyl-2,8,9-trioxa-5-aza-1-germatricyclo[3.3.3.0^1,5]undecane (2), and 1-isopropoxy-3,3-dimethyl-2,8,9-trioxa-5-aza-1-germatricyclo[3.3.3.0^1,5]undecane (3) have been synthesized by the reaction of Ge(O-i-Pr)₄ in refluxing toluene with corresponding triethanolamines, (HOCH₂CH₂)_nN(CH₂CMe₂OH)_3−n (n = 0, L1H₃; n = 1, L2H₃; n = 2, L3H₃), where the number of CMe₂ groups adjacent to a OH functionality varied from 3 (L1H₃) to 2 (L2H₃), and to 1 (L3H₃). These germatranes 1-3 have been characterized by solution ¹H and ¹³C{¹H} NMR and the solid state structure of 2 has been determined by single crystal X-ray diffraction.     

Oxidative and hydrolytic DNA cleavage by Cu(II) complexes of salicylidene tyrosine schiff base and 1,10 phenanthroline/bipyridine

Ternary Cu(II) complexes [Cu(II)(saltyr)(B)] (1,2), (saltyr = salicylidene tyrosine, B = 1,10 phenanthroline (1) or 2,2′ bipyridine (2)) were synthesized and characterized by various techniques. The complexes exhibit square pyramidal (CuN₃O₂) geometry. CT-DNA binding studies revealed that the complexes show good binding propensity (K_b = 3.47 × 10⁴ M⁻¹ and 3.01 × 10⁴ M⁻¹ for 1 and 2, respectively). The role of these complexes in the oxidative and hydrolytic DNA cleavage was studied. The catalytic ability of 1 and 2 follows the order: 1 > 2. The rate constants for the hydrolysis of phosphodiester bond were determined as 2.80 h⁻¹ and 2.11 h⁻¹ for 1 and 2, respectively. It amounts to (0.58-0.77) × 10⁸ fold rate enhancement compared to non-catalyzed DNA cleavage, which is significant.     

Comparative studies of praseodymium(III) selective sensors based on newly synthesized Schiff's bases

Praseodymium ion selective polyvinyl chloride (PVC) membrane sensors, based on two new Schiff's bases 1,3-diphenylpropane-1,3-diylidenebis(azan-1-ylidene)diphenol (M₁) and N,N′-bis(pyridoxylideneiminato) ethylene (M₂) have been developed and studied. The sensor having membrane composition of PVC: o-NPOE: ionophore (M₁): NaTPB (w/w; mg) of 150: 300: 8: 5 showed best performances in comparison to M₂ based membranes. The sensor based on (M₁) exhibits the working concentration range 1.0 × 10⁻⁸ to 1.0 × 10⁻² M with a detection limit of 5.0 × 10⁻⁹ M and a Nernstian slope 20.0 ± 0.3 mV decade⁻¹ of activity. It exhibited a quick response time as <8 s and its potential responses were pH independent across the range of 3.5-8.5.The influence of the membrane composition and possible interfering ions have also been investigated on the response properties of the electrode. The sensor has been found to work satisfactorily in partially non-aqueous media up to 15% (v/v) content of methanol, ethanol or acetonitrile and could be used for a period of 3 months. The selectivity coefficients determined by using fixed interference method (FIM) indicate high selectivity for praseodymium(III) ions over wide variety of other cations. To asses its analytical applicability the prepared sensor was successfully applied for determination of praseodymium(III) in spiked water samples.     

Syntheses,characterizations and crystal structures of monomeric or macrocyclic compounds of di- or triorganotin (IV) moieties with 4,4′-thiodibenzenethiol

Six organotin compounds with 4,4′-thiodibenzenethiol (LH₂) of the type R_nSnL_4−nSnR_n (n = 3: R = Me 1, Ph 2, PhCH₂3, n = 2: R = Me 4, Ph 5, PhCH₂6) have been synthesized. All compounds were characterized by elemental analysis, IR and NMR (¹H, ¹³C, and ¹¹⁹Sn) spectra. The structures of compounds 1, 2, 4, 5 and 6 were also determined by X-ray diffraction analysis, which revealed that compounds 1 and 2 were monomeric structures, compounds 4, 5 and 6 were centrosymmetric dinuclear macrocyclic structures, and all the tin(IV) atoms are four-coordinated. Furthermore, supramolecular structures were also found in compounds 1, 2, 4, 5 and 6, which exhibit one-dimensional chains, two-dimensional networks or three-dimensional structures through intermolecular C–H?S weak hydrogen bonds (WHBs), non-bonded Sn?S interactions or C–H?π interactions.     

Structural studies of phosphor-1,1-diselenoato Mn(I) and Re(I) complexes

Mononuclear complexes of the type, M(CO)₄[Se₂P(OR)₂] (M = Mn, R = ⁱPr, 1a; Et, 1b; M = Re, R = ⁱPr, 3a; Et, 3b) can be prepared from either [-Se(Se)P(OⁱPr)₂]₂ (A) or [Se{-Se(Se)P(OEt)₂}₂] (B) with M(CO)₅Br. O,O′-dialkyl diselenophosphate ([(RO)₂PSe₂]^-, abbreviated as dsep) ligands generated from A and B act as a chelating ligand in these complexes. Upon refluxing in acetonitrile, these mononuclear complexes yield dinuclear complexes with a general formula of [M₂(CO)₆{Se₂P(OR)₂}₂] (M = Mn, R = ⁱPr, 2a; Et, 2b; M = Re, R = ⁱPr, 4a; Et, 4b). Dsep ligands display a triconnective, bimetallic bonding mode in the dinuclear compounds and this kind of connective pattern has never been identified in any phosphor-1,1-diselenoato metal complexes. Compounds 2b, 3b, and 4 are structurally characterized. Compounds 2b and 3b display weak, secondary Se?Se interactions in their lattices.     

Palladiumdichloride (ferrocenylethynyl)phosphanes and their use in Pd-catalyzed Heck-Mizoroki- and Suzuki-Miyaura carbon-carbon cross-coupling reactions

In this work the synthesis of phosphane selenides (FcCC)_nPh_3−nPSe (2a, n = 1; 2b, n = 2; 2c, n = 3; Fc = ferrocenyl, (η⁵-C₅H₄)(η⁵-C₅H₅)Fe) from (FcCC)_nPh_3−nP (1a, n = 1; 1b, n = 2; 1c, n = 3) and selenium is described to estimate the σ-donor properties of these systems by ³¹P{¹H} NMR spectroscopy. Progressive replacement of phenyl by ferrocenylethynyl causes a shielding of the phosphorus atom with increasing of the ¹J(³¹P-⁷⁷Se) coupling constants.The palladiumdichloride metal-organic complexes [((FcCC)_nPh_3−nP)₂PdCl₂] (3a, n = 1; 3b, n = 2; 3c, n = 3) have been used as (pre)catalysts in the Suzuki-Miyaura (reaction of 2-bromo-toluene (4a) and 4-bromo-acetophenone (4b), respectively, with phenyl boronic acid (5) to give 2-methyl biphenyl (6a) and 4-acetyl biphenyl (6b)) and in the Heck-Mizoroki reaction (treatment of iodobenzene (7) with tert-butyl acrylate (8) to give E-tert-butyl cinnamate (9)).The structures of molecules 1a, 1c, 2c, and 3c in the solid state were determined by single X-ray structure analysis showing that the structural parameters of these systems are unexceptional and correspond to those of related phosphanes, seleno phosphanes, and palladium dichloride complexes.     

Carbosiloxandendrimere mit terminalen SiH-Bindungen

An efficient method for the preparation of carbosiloxane dendrimers with end-grafted SiH-bonds is given by using the alcohols HOCH(Me)(CH₂)₄SiMe_3 − nH_n (4a: n = 1, 4b: n = 2, 4c: n = 3), which themselves are accessible by the hydrosilylation of MeCOCH₂CH₂CHCH₂ (1) with the chlorosilanes HSiMe_3 − nCl_n (2a: n = 1, 2b: n = 2, 2c: n = 3) and hydrogenation of the latter species with Li[AlH₄]. Alcohols 4a-4c can be used as starting materials for the preparation of carbosiloxane dendrimers of the 1^st-3^rd generation. For the synthesis of the 1^st generation dendrimers, Me_4 − mSiCl_m (5a: m = 1, 5b: m = 2, 5c: m = 3, 5d: m = 4) is reacted with 4a-4c in presence of NEt₃ as base. The dendritic molecules Me_4 − mSi[OCH(Me)(CH₂)₄SiMe_3 − nH_n]_m (n = 1: 6a, m = 1; 6b, m = 2; 6c, m = 3; 6d, m = 4. n = 2: 7a, m = 1; 7b,m = 2; 7c, m = 3; 7d, m = 4. n = 3: 8a, m = 3; 8b, m = 4) are thereby obtained in excellent yield. Carbosiloxane dendrimers of the 2^nd and 3^rd generation with a MeSiO₃- or SiO₄-core can be isolated from the reaction of MeSi(OCH₂CH₂CH₂SiMe₂Cl)₃ (9), MeSi(OCH₂CH₂CH₂SiMeCl₂)₃ (11), Si(OCH₂CH₂CH₂SiMe₂Cl)₄ (13) and MeSi(OCH₂CH₂CH₂SiMe(OCH₂CH₂CH₂SiMe₂Cl)₂)₃ (15) with 4a or 4b, respectively, under similar reaction conditions. Thereby MeSi[OCH₂CH₂CH₂SiMe₂OCH(Me)(CH₂)₄SiMe₂H]₃ (10), MeSi[OCH₂CH₂CH₂SiMe[OCH(Me)(CH₂)₄SiMe_3 − nH_n]₂]₃ (12a, n = 1; 12b, n = 2), Si[OCH₂CH₂CH₂SiMe[OCH(Me)(CH₂)₄SiMe₂H]₂]₄ (14) and MeSi[OCH₂CH₂CH₂SiMe[OCH₂CH₂CH₂SiMe₂OCH(Me)(CH₂)₄SiMe_3 − nH_n]₂]₃ (16) are formed as colourless oils.Compounds 3, 4, 6-8, 10, 12, 14 and 16 were characterised by elemental analysis as well as spectroscopic (IR, NMR) and mass spectrometric (ESI-TOF) studies.     

New 3d–4f supramolecular systems constructed by [Fe(bipy)(CN)4] and partially blocked lanthanide cations

The reaction of acetonitrile (1–5) and mixed acetonitrile/water 1:1 (6–9) solutions containing the cyanide-bearing [Fe(bipy)(CN)₄]⁻ building block (bipy = 2,2′-bipyridine) and the partially blocked [Ln(bpym)]³⁺ cation (Ln = lanthanide trivalent cation and bpym = 2,2′-bipyrimidine) has afforded two new families of 3d–4f supramolecular assemblies of formula [Ln(bpym)(NO₃)₂(H₂O)₃][Fe(bipy)(CN)₄] · H₂O · CH₃CN [Ln = Sm (1), Gd (2), Tb (3), Dy (4) and Ho (5)] and [Ln(bpym)(NO₃)₂(H₂O)₄][Fe(bipy)(CN)₄] [Ln = Pr (6), Nd (7), Sm (8), Gd (9)]. They crystallize in the P2₁/c (1–5) and P2/c (6–9) space groups and their structures are made up of [Fe(bipy)(CN)₄]⁻ anions (1–9) and [Ln(bpym)(NO₃)₂(H₂O)_n]⁺ cations [n = 3 (1–5) and 4 (6–9)] with uncoordinated water and acetonitrile molecules (1–5) which are interlinked through an extensive network of hydrogen bonds and π–π stacking into three-dimensional motifs. Both families have in common the occurrence of the low-spin iron(III) unit [Fe(bipy)(CN)₄]⁻ where two bipy–nitrogen and four cyanide–carbon atoms build a somewhat distorted octahedral surrounding around the iron atom [Fe–N = 1.980(3)–1.988(3) Å (1–5) and 1.988(2)–1.992(2) Å (6–9); Fe–C = 1.904(5)–1.952(4) Å (1–5) and 1.911(2)–1.948(3) Å (6–9)]. The main structural difference between both families concerns the environment of the lanthanide atom which is nine- (1–5)/10-coordinated (6–9) with a chelating bpym, two bidentate nitrate and three (1–5)/four (6–9) water molecules building distorted monocapped (1–5)/bicapped (6–9) square antiprisms. This different lanthanide environment is at the origin of the different hydrogen bonding pattern of the two families of compounds.     

Cation-anion interactions involving hydrogen bonds: Syntheses and crystal structures study of hexafluorotitanate(IV) salts with pyridine and methyl substituted pyridines

Fluorotitanates (LH)₂[TiF₆]·nH₂O (1: R = pyridine, n = 1, 2: R = 2-picoline, n = 2, 3: R = 2,6-lutidine, n = 0, 4: R = 2,4,6-collidine, n = 0) and (LH)[TiF₅(H₂O)] (3a: L = 2,6-lutidine) have been synthesized by the reaction of pyridine or corresponding methyl substituted pyridines and titanium dioxide dissolved in hydrofluoric acid. The crystal structures of ionic compounds 1, 2, 3, 3a and 4 have been determined by single-crystal X-ray diffraction analysis. The hydrogen bonding led to the formation of discrete (LH)₂[TiF₆] units (4), chains (1-3), and layers (3a). The additional π-π interactions present in 1, 2, and 4 results in chain structures of 1 and 4 and in a layer structure of 2. The [TiF₆]²⁻ and [TiF₅(H₂O)]⁻ anions were observed by ¹⁹F NMR spectroscopy in aqueous solutions of 1, 2, 3, 3a and 4.     

Platinum-catalyzed double silylations of alkynes with bis(dichlorosilyl)methanes

Bis(dichlorosilyl)methanes 1 undergo the two kind reactions of a double hydrosilylation and a dehydrogenative double silylation with alkynes 2 such as acetylene and activated phenyl-substituted acetylenes in the presence of Speier’s catalyst to give 1,1,3,3-tetrachloro-1,3-disilacyclopentanes 3 and 1,1,3,3-tetrachloro-1,3-disilacyclopent-4-enes 4 as cyclic products, respectively, depending upon the molecular structures of both bis(dichlorosilyl)methanes (1) and alkynes (2). Simple bis(dichlorosilyl)methane (1a) reacted with alkynes [R¹-CC-R²: R¹ = H, R² = H (2a), Ph (2b); R¹ = R² = Ph (2c)] at 80 °C to afford 1,1,3,3-tetrachloro-1,3-disilacyclopentanes 3 as the double hydrosilylation products in fair to good yields (33-84%). Among these reactions, the reaction with 2c gave a trans-4,5-diphenyl-1,1,3,3-tetrachloro-1,3-disilacyclopentane 3ac in the highest yield (84%). When a variety of bis(dichlorosilyl)(silyl)methanes [(Me_nCl_3 − nSi)CH(SiHCl₂)₂: n = 0 (1b), 1 (1c), 2 (1d), 3 (1e)] were applied in the reaction with alkyne (2c) under the same reaction conditions. The double hydrosilylation products, 2-silyl-1,1,3,3-tetrachloro-1,3-disilacyclopentanes (3), were obtained in fair to excellent yields (38-98%). The yields of compound 3 deceased as follows: n = 1 > 2 > 3 > 0. The reaction of alkynes (2a-c) with 1c under the same conditions gave one of two type products of 1,1,3,3-tetrachloro-1,3-disilacyclopentanes 3 and 1,1,3,3-tetrachloro-1,3-disilacyclopent-4-enes (4): simple alkyne 2a and terminal 2b gave the latter products 4ca and 4cb in 91% and 57% yields, respectively, while internal alkyne 2c afforded the former cyclic products 3cc with trans form between two phenyl groups at the 3- and 4-carbon atoms in 98% yield, respectively. Among platinum compounds such as Speier’s catalyst, PtCl₂(PEt₃)₂, Pt(PPh₃)₂(C₂H₄), Pt(PPh₃)₄, Pt[ViMeSiO]₄, and Pt/C, Speier’s catalyst was the best catalyst for such silylation reactions.     

Half-sandwich cyclopentadienyl rhodium complexes bearing pendant sulfur or oxygen ligands and their catalytic behaviors in ethylene polymerization

Two half-sandwich rhodium complexes with sulfur or oxygen functionalized cyclopentadienyl ligands [η⁵-C₅H₄(CH₂)₂SCH₂CH₃]RhI₂3, {[η⁵-C₅H₄(CH₂)₂OCH₃]RhI₂}₂4 have been synthesized and characterized by IR, ¹H-NMR spectra and Elemental analyses. The molecular structures of complexes 3 and 4 have been determined by X-ray crystallographic analysis. Complexes 3, 4 with a pendent arm on cyclopentadienyl ligand have been tested as catalysts for ethylene and norbornene polymerization in the presence of MAO. Complexes 3 and 4 kept high activities of ca. 10⁶ g PE mol⁻¹ Rh h⁻¹ with morderate molecular weight (M_w ≈ 10⁵ g mol⁻¹) of polyethylene in the ethylene polymerization. Catalytic activities, molecular weights of polyethylene have been investigated under the various reaction conditions.     

Supramolecular assemblies in the crystals of carboxylate salts prepared from a ferrocene β-aminoalcohol

(Ferrocenylmethyl)(2-hydroxyethyl)amine (1) reacts with mono- (CH₃CO₂H and PhCO₂H) and dicarboxylic acids (HO₂C(CH₂)_nCO₂H (n = 0-2), (E)- and (Z)-HO₂CCHCHCO₂H) to give the respective carboxylates, viz [1H](RCO₂) (2, R = CH₃; 3, R = Ph), [1H]₂(O₂C(CH₂)_nCO₂) (4, n = 0; 5, n = 1; 6, n = 2), [1H]₂((E)-O₂CCHCHCO₂) (7) and [1H]₂((Z)-HO₂CCHCHCO₂) (8), as defined crystalline solids. Crystal structures of 2-8 have been determined by single-crystal X-ray diffraction analysis, revealing extensive hydrogen bonding interactions based predominantly on charge-supported N⁺-H···O⁻ and O-H···O⁻ hydrogen bonds, and on C-H···O contacts. Whereas the crystal assemblies of the monocarboxylate salts propagate preferentially in one dimension (2: cross-linked chains, 3: columnar stacks), those of the salts prepared from the dicarboxylic acids (including hydrogenmaleate 8) are best described as layered composite arrays resulting via alternation of polar, hydrogen-bonded layers and of non-polar sheets constituted by the ferrocenyl substituents.     

Novel hydridotris(pyrazolyl)borate ruthenium(II) complexes containing the water-soluble phosphane 1,3,5-triaza-7-phosphaadamantane: Synthesis and evaluation of DNA binding properties

A series of half-sandwich ruthenium(II) complexes containing κ³(N,N,N)-hydridotris(pyrazolyl)borate (κ³(N,N,N)-Tp) and the water-soluble phosphane 1,3,5-triaza-7-phosphaadamantane (PTA) [RuX{κ³(N,N,N)-Tp}(PPh₃)_2−n(PTA)_n] (n = 2, X = Cl (1), n = 1, X = Cl (2), I (3), NCS (4), H (5)) and [Ru{κ³(N,N,N)-Tp}(PPh₃)(PTA)L][PF₆] (L = NCMe (6), PTA (7)) have been synthesized. Complexes containing 1-methyl-3,5-diaza-1-azonia-7-phosphaadamantane(m-PTA) triflate [RuCl{κ³(N,N,N)-Tp}(m-PTA)₂][CF₃SO₃]₂ (8) and [RuX{κ³(N,N,N)-Tp}(PPh₃)(m-PTA)][CF₃SO₃] (X = Cl (9), H (10)) have been obtained by treatment, respectively, of complexes 1, 2 and 5 with methyl triflate. Single crystal X-ray diffraction analysis for complexes 1, 2 and 4 have been carried out. DNA binding properties by using a mobility shift assay and antimicrobial activity of selected complexes have been evaluated.