Studies of structures of poly-ε-caprolactam/montmorillonite nanocomposite: Part 1. Tests of compression moulded specimens

A poly-ε-caprolactam (PA6) taken as a reference and its nanocomposite (PNC) containing 1.6 wt.% of montmorillonite were examined. The specimens as discs were prepared by compression moulding at 235 °C and 70 MPa. Using the novel version of TMA, in the PA6 and PNC specimens, within the temperature range from −100 to 250 °C, a semi-crystalline structure with anisotropy of distribution of the more ordered (crystalline?) portion was found in the surface layer up to 0.5 mm thick. The amorphous regions have differed in a state of order (different transition temperatures) and related compactness. The free volume fraction in amorphous regions determined in machine direction (normal to the surface) is increased when in transverse direction is reduced; simultaneously molecular weights of polymer chains between junctions were increased by incorporation of the nanofiller.     

Structural and thermal investigation of gadolinium gallium mixed oxides obtained by coprecipitation: Observation of a new metastable phase

Polycrystalline gadolinium gallium mixed oxides were prepared by coprecipitation and annealing at various temperatures below 1000 °C. The oxide materials appear to be X-ray amorphous after a heat treatment at 500 °C for 30 h, but after 30 h at 800 and 900 °C a major, unreported, hexagonal phase, isostructural with TAlO₃ compounds (where T=Y, Eu, Gd, Tb, Dy, Ho, Er) appears to crystallize. On the other hand, a highly energetic mechanical treatment of the amorphous powder previously annealed at 500 °C changes considerably the shape and position of exothermal events occurring in the range from 700 up to 900 °C. Subsequent annealing at 900 °C of the mechanically treated powder gives rise to the complete formation of the Gd₃Ga₅O₁₂ garnet structure at the expense of the hexagonal phase and of the minor Gd₄Ga₂O₉ oxide phase. However, a 7.0 wt% contamination is found to be due to tetragonal zirconia coming from vials and balls colliding media. The garnet phase may have strong deviations from the nominal stoichiometry of the garnet, as suggested by the refined lattice parameter obtained from the powder diffraction patterns and by the remarkable absence of intensity relative to the (220) Bragg peak position.     

Nonisothermal crystallization kinetics and spherulite morphology of poly(trimethylene terephthalate)

The nonisothermal melt crystallization behavior of poly(trimethylene terephthalate) (PTT) was investigated using the DSC technique. PTT peak exothermic crystallization temperature was found to move to lower temperatures as the cooling rate was increased. The modified Avrami equation exponent, n, was 4 when the cooling rates were between 5 and 15 °C/min, indicating a thermal nucleation and a three-dimensional spherical growth mechanism. When the cooling rate was increased to 25 °C/min, n gradually decreased to near 3, implying the nucleation mechanism changed to an athermal mode. PTT nonisothermal crystallization behavior could also be analyzed using the Ozawa equation and the combined equations of Ozawa and Avrami with very good fit of the data.PTT spherulite morphologies and the sign of the birefringence depended strongly on the spherulite's growth temperature. When the growth temperature was decreased from 222 to 170 °C, the spherulite changed from a saturation-type dendritic morphology to one with a colorful banded texture; the sign of the birefringence also changed in the following order: from a weakly positive spherulite → mixed spherulite → weakly negative spherulite → negative spherulite → positive spherulite → negative spherulite → positive spherulite.     

Mechanism of degradation induced embrittlement in polyethylene

The thermal oxidation of polyethylene films in air at 80 °C and 90 °C has been studied by tensile testing, IR spectrophotometry and molar mass determination from rheometric measurements. In the conditions under study, the polymer predominantly undergoes chain scission and embrittles suddenly when the weight average molar mass reaches a critical value (90 kg mol⁻¹), far before significant damage of the entanglement network (M_e = 1.9 kg mol⁻¹) in the amorphous phase.The following embrittlement mechanism is proposed: chain scission in the amorphous phase induces chemicrystallization. The thickness of the interlamellar amorphous layer (l_a) decreases until a critical value of the order of 6-7 nm, below which plasticity cannot be activated and the polymer behaves in a brittle manner, as previously shown for virgin polyethylene. Using (l_a, M_W) maps, it is possible to explain the differences observed in the embrittlement behaviour of semi-crystalline polymers predominantly undergoing chain scission.     

Studies of structures of poly-ε-caprolactam/montmorillonite nanocomposite: Part 2. Tests of annealed specimens

Using the novel version of thermomechanical analysis (TMA) method, a poly-ε-caprolactam (PA6) and its nanocomposite (PNC) containing 1.6 wt.% of montmorillonite (MMT) were examined. Several disc specimens of those as investigated in the first part of this article were then melted, annealed, and sheared at a rate of 0.5 s⁻¹ engendering ca. 140% strain at 240 °C in a rotational rheometer, and next solidified in ambient air. In PNC as in PA6 specimens prepared in the same way, an amorphous isotropic structure in the surface layer up to 0.5 mm thick was identified, with topological regions differing in thermal expansion properties and related a state of order. This finding differs from other tests, which detect a high level of crystallinity. Probably, it is related with small thickness of the tested layer of material and kinetics of solidification in ambient air.An increase in the free volume fraction, V_f^TMA, evaluated as equal to 3ΔαT_g (Δα is the difference in linear thermal expansion coefficients below and above the glass transition temperature T_g) and resulted from melting, annealing, shearing, and next solidification in ambient air was observed. It suggests that these operations introduce into the specimen some amount of gases (e.g., evaporated water absorbed when cooling) what increases thermal expansion over high-temperature transition of the high-temperature topological region. It means that V_f^TMA is a sum of all voids within a specimen tested (not only a real free volume) independently on their origin. Because of this, it is better to term it as micro or nanoporosity.     

Temperature-dependent structural study of microporous CsAlSi5O12

CsAlSi₅O₁₂ crystals were synthesized at high temperature by slow cooling of a vanadium oxide flux. Single-crystal X-ray diffraction structure analysis and electron microprobe analyses yielded the microporous CAS zeolite framework structure of Cs_0.85Al_0.85Si_5.15O₁₂ composition. High-temperature single-crystal and powder X-ray diffraction studies were utilized to analyze anisotropic thermal expansion. Rietveld refined cell constants from powder diffraction data, measured in steps of 25 °C up to 700 °C, show a significant decrease in expansion above 500 °C. At 500 °C, a displacive, static disorder-dynamic disorder-type phase transition from the acentric low-temperature space group Ama2 to centrosymmetric Amam (Cmcm in standard setting) was found. Thermal expansion below the phase transition is governed by rigid-body TO₄ rotations accompanied by stretching of T-O-T angles. Above the phase transition at 500 °C all atoms, except one oxygen (O6), are fixed on mirror planes. Temperature-dependent polarized Raman single-crystal spectra between −270 and 300 °C and unpolarized spectra between room temperature and 1000 °C become increasingly less resolved with rising temperature confirming the disordered static-disordered dynamic type of the phase transition.     

Competition of phase dissolution and crystallization in poly(ε-caprolactone)/poly(styrene-co-acrylonitrile) blend

Blend of poly(ε-caprolactone) (PCL) and poly(styrene-co-acrylonitrile) (SAN) containing 27.5 wt% of acrylonitrile was studied. The PCL/SAN blend having LCST (lower critical solution temperature) phase boundary above the melting point T_m of PCL offered an excellent opportunity to investigate the competition of liquid-solid phase transition (crystallization) and liquid-liquid phase transition (phase dissolution). A blend with the critical composition (80/20 PCL/SAN) underwent a temperature-jump above LCST to proceed spinodal decomposition, yielding a regularly phase-separated structure (SD structure). Then, it was quenched to the temperatures below T_m at which both the crystallization and the phase dissolution could occur. By transmission electron microscopy it was found that during isothermal annealing after quenching to high temperatures close to T_m (e.g. 51 °C), the SD structure gradually disappeared, and then the crystallization started from a single-phase mixture to yield normal crystalline structure similar to that of a neat crystalline polymer. At lower temperatures (e.g. 40 °C), crystallization quickly occurred and the SD structure was preserved, implying that the crystallization prevailed over the dissolution yielding a bi-continuous structure consisting of amorphous (SAN-rich) and crystalline (PCL-rich) regions. At intermediate temperatures (e.g. 45 °C), the phase dissolution competed with the crystallization, resulting in a bi-continuous structure with longer periodic distance and a broad boundary having a gradient in composition of amorphous region between PCL crystal lamellae. Light-scattering analysis quantitatively revealed a competition of the crystallization and the phase dissolution in terms of the crystallization rate (from H_v scattering) and the apparent diffusion coefficient for dissolution (from V_v scattering).     

Hydrolytic aging of crystallizable shape memory poly(ester urethane): Effects on the thermo-mechanical properties and visco-elastic modeling

The shape memory functionality of a segmented poly(ester urethane) and its hydrolytically aged specimens has been studied by cyclic thermo-mechanical measurements with an imposed strain of 100%. The shape memory effect was triggered by a melting transition in the soft segment phase. Aging was enforced by immersion in hot de-ionized water. In the course of the immersion the tensile properties (secant moduli, stress and strain at yield and break) were impaired by hydrolysis. Advanced specimen embrittlement finally led to rupture during the first thermo-mechanical cycle. This happened after 68 days of aging at 55 °C and correspondingly after 8 days at 80 °C. The residual strain after the first cycle, which was about 25%, increased significantly with aging time. Therefore, the total strain recoverability became ever smaller: aged specimens needed conditioning by at least two cycles for a full development of shape recoverability. Likewise the recovery force decreased continuously. Despite these degradation effects, it was observed that the shape fixity and the cycle-related shape recovery of appropriately conditioned specimens (number of cycles N > 2) remained on a constant high level (at round 100% and between 90% and 100%, respectively) throughout the whole aging period. These observations are discussed within the framework of a simplified model of the behavior of crystallizable shape memory polymers. The amorphous state of the polymer is described by the equation of the linear visco-elastic solid. As for the semi-crystalline state the material is assumed to react elastically with respect to deviations from the configuration, which was frozen up under constraint conditions. The curves of the dependence of the material behavior on aging time at 55 °C match perfectly those at 80 °C when the time axis is adjusted by a factor of 8.5, from which the apparent activation energy for hydrolytic aging in the amorphous state of 82 kJ mol⁻¹ could be deduced.     

Evaluation of a new polymeric stationary phase with reversed-phase properties for high temperature liquid chromatography

The performance of a polymeric stationary phase with reversed-phase properties (ET-RP1) was evaluated for LC separations at elevated temperature. The most significant observation was that the reduced plate height (h) decreased from 3.4 at 25 °C (optimal flow 0.5 mL/min) to 2.4 at 150 °C (optimal flow 2.5 mL/min) which is comparable to the efficiency obtained with silica-based reversed-phase columns of 4.6 mm ID operated at 0.8 mL/min. The phase showed no deterioration after long use at 150 °C within the pH range 1–9. Catalytic activity originating from the stationary phase material, e.g. as experienced on zirconium columns operated at elevated temperature, was absent. The performance of ET-RP1 is illustrated with the analysis of some pharmaceutical samples by LC and LC–MS. Operation at elevated temperature also allows to reduce the amount of organic modifier or to replace acetonitrile and methanol by the biodegradable ethanol.     

Correlation of optical properties and temperature-induced irreversible phase transitions in europium-doped yttrium carbonate nanoparticles

Nanophase europium-doped yttrium carbonate precursors are subjected to heat treatments, ranging from 300 °C to 1100 °C for dwell times of 5 min, 30 min, and 180 min. XRD, TEM, FT-IR, fluorescence, fluorescence excitation, and fluorescence lifetime measurements are used to characterize the materials. Upon heating, the material transitions through several amorphous stages until it reaches the crystalline cubic Y₂O₃ phase. DSC measurements show an exothermic transition at 665.7 °C, indicating the formation of crystalline Y₂O₃. The grain size development is fitted by the relaxation equation and yields an activation energy of 50.3 kJ/mol. The amorphous phases are characterized by inhomogenously broadened optical spectra. Heating up to 700 °C leads to an increased fluorescence lifetime (from about 1 ms to 2.4 ms). As the material is heated to higher temperatures and completes the formation of the crystalline cubic Y₂O₃ phase, the optical spectra become narrower and the fluorescence lifetime decreases to about 1.2 ms.     

Oxidation behaviour and kinetic properties of shape memory CuAlxNi4 (x=13.0 and 13.5) alloys

Although the copper-based shape memory alloys (SMA) have some important problems such as controlling of the kinetic properties in the shape memory ability, they have relatively more advantages when compared to nitinol, such as lower price and simpler production technology. In order to determine the kinetic properties and oxidation rates of shape memory CuAl_xNi₄ (x=13 and 13.5) alloys with polycrystalline forms, the alloys have been homogenized in β-phase field at 930 °C for 30 min and immediately quenched in iced-brine water at −3 °C. The transformation temperatures in a period of three thermal cycles which include heating and cooling processes have been determined through Shimadzu DSC-50 differential scanning calorimeter. Activation energies of forward and reverse martensitic transformations have been calculated by using the Kissenger method. Thermogravimetric analysis with Shimadzu TGA-50 have been carried out for the determination of mass changes of alloys during heating and cooling cycles with two temperature rates selected as 10 and 30 °C/min up to 900 °C. It has been shown that increasing aluminium content reduces the oxidation rates of the alloys. It has also been established that CuAlNi shape memory alloys have a good stabilization in martensitic phase.     

Formation of γ-Fe2O3 nanoparticles and vacancy ordering: An in situ X-ray powder diffraction study

The formation of maghemite, γ-Fe₂O₃ nanoparticles has been studied by in situ X-ray powder diffraction. The maghemite was formed by thermal decomposition of an amorphous precursor compound made by reacting lauric acid, CH₃(CH₂)₁₀COOH with Fe(NO₃)₃·9H₂O. It has been shown that cubic γ-Fe₂O₃ was formed directly from the amorphous precursor and that vacancy ordering starts about 45 min later at 305 °C resulting in a tripled unit cell along the c-axis. The kinetics of grain growth was found to obey a power law with growth exponents n equal to 0.136(6) and 0.103(5) at 305 and 340 °C, respectively. Particles with average sizes of 12 and 13 nm were obtained in 86 and 76 min at 305 and 340 °C, respectively. The structure of cubic and vacancy ordered phases of γ-Fe₂O₃ was studied at 305 °C by Rietveld refinements.     

Development of a headspace solid phase microextraction-gas chromatography method for monitoring volatile compounds in extended time-course experiments of olive oil

A novel method for monitoring fibre performance and death, based on a Shewhart control plot, for use in headspace analysis by solid phase microextraction-gas chromatography (SPME-GC) is presented. The method is also demonstrated to be effective in standardising fibre response in extended time-course experiments, where several fibres may be required to complete a lengthy study. Extraction conditions that gave good total recovery and diversity of compounds, from olive oil headspace were found to be: 1 g oil sample in 10 mL vessel; exposure of DVB-CAR-PDMS, 50/30 μm fibre for 30 min at 40 °C; and desorption for 3 min at 250 °C. Calibration curves were constructed for 25 compounds commonly reported in olive oil headspace; with coefficients of determination (R²) ranging from 0.959 to 0.994 and limits of detection (LOD) from 0.01 to 0.59 μg/g. The method was applied to monitor the change in concentration of select C6 volatile compounds, which have implications in sensory quality - E-2-hexenal, hexanal, E-2-hexen-1-ol, hexanol - over a period of 12 months storage.     

A study of the reactivity of elemental Cr/Se/Te thin multilayers using X-ray reflectometry, in situ X-ray diffraction and X-ray absorption spectroscopy

The reactivity of [Cr/Se/Te] multilayers under annealing was investigated using X-ray reflectometry, in situ X-ray diffraction, X-ray absorption fine structure (XAFS) measurements and transmission electron microscopy. For all samples, interdiffusion was complete at temperatures between 100 and 300 °C, depending on the repeating tri-layer thickness. A crystalline phase nucleated approximately 20 °C above the temperature where interdiffusion was finished. The first crystalline phase in a binary Cr/Te sample was layered CrTe₃ nucleating at 230 °C. In ternary samples (Se:Te=0.6-1.2), the low-temperature nucleation of such a layered CrQ₃ (Q=Se, Te) phase is suppressed and instead the phase Cr₂Q₃ nucleates first. Interestingly, this phase decomposes around 500 °C into layered CrQ₃. In contrast, binary Cr/Se samples form stable amorphous alloys after interdiffusion and Cr₃Se₄ nucleates around 500 °C as the only crystalline phase. Evaluation of the XAFS data of annealed samples yield Se-Cr distances of 2.568(1) and 2.552(1) Å for Cr₂Q₃ and CrQ₃, respectively. In the latter sample, higher coordination shells around Se are seen accounting for the Se-Te contacts in the structure.     

Thermal degradation kinetics of the biodegradable aliphatic polyester, poly(propylene succinate)

The preparation of the biodegradable aliphatic polyester poly(propylene succinate) (PPSu) using 1,3-propanediol and succinic acid is presented. Its synthesis was performed by two-stage melt polycondensation in a glass batch reactor. The polyester was characterized by gel permeation chromatography, ¹H NMR spectroscopy and differential scanning calorimetry (DSC). It has a number average molecular weight 6880 g/mol, peak temperature of melting at 44 °C for heating rate 20 °C/min and glass transition temperature at −36 °C. After melt quenching it can be made completely amorphous due to its low crystallization rate. According to thermogravimetric measurements, PPSu shows a very high thermal stability as its major decomposition rate is at 404 °C (heating rate 10 °C/min). This is very high compared with aliphatic polyesters and can be compared to the decomposition temperature of aromatic polyesters. TG and Differential TG (DTG) thermograms revealed that PPSu degradation takes place in two stages, the first being at low temperatures that corresponds to a very small mass loss of about 7%, the second at elevated temperatures being the main degradation stage. Both stages are attributed to different decomposition mechanisms as is verified from activation energy determined with isoconversional methods of Ozawa, Flyn, Wall and Friedman. The first mechanism that takes place at low temperatures is auto-catalysis with activation energy E = 157 kJ/mol while the second mechanism is a first-order reaction with E = 221 kJ/mol, as calculated by the fitting of experimental measurements.     

Application of solid-phase microextraction for the determination of organophosphorus pesticides in textiles by gas chromatography with mass spectrometry

A method based on solid-phase microextraction (SPME) and gas chromatography with mass spectrometry (GC/MS) for the determination of 18 organophosphorus pesticides (OPPs) in textiles is described. Commercially available SPME fibers, 100 μm PDMS and 85 μm PA, were compared and 85 μm PA exhibited better performance to the OPPs. Various parameters affecting SPME, including extraction and desorption time, extraction temperature, salinity and pH, were studied. The optimized conditions were: 35 min extraction at 25 °C, 5% NaSO₄ content, pH 7.0, and 3.5 min desorption in GC injector port at 250 °C. The linear ranges of the SPME-GC/MS method were 0.1-500 μg L⁻¹ for most of the OPPs. The limits of detection (LODs) ranged from 0.01 μg L⁻¹ (for bromophos-ethyl) to 55 μg L⁻¹ (for azinphos-methyl) and the RSDs were between 0.66% and 9.22%. The optimized method was then used to analyze 18 OPPs in textile sample, and the determined recoveries were ranged from 76.7% to 126.8%. Moreover, the distribution coefficients of the OPPs between 85 μm PA fiber and simulative sweat solution (K_pa/s) were determined. The determined K_pa/s of the OPPs correlated well with their octanol-water partition coefficients (r = 0.764 and 0.678) and water solubility (r = −0.892 and −0.863).     

Alkaline extraction in combination with microwave-assisted extraction followed by solid-phase extraction treatment for polycyclic aromatic hydrocarbons in a sediment sample

Microwave-assisted extraction using 1 M KOH/methanol (alkaline-MAE) in combination with solid-phase extraction treatment was developed and applied to polycyclic aromatic hydrocarbons (PAHs) in a sediment sample. Although various conditions were examined (100 or 150 °C for 10 or 30 min), comparable concentrations of PAHs to those obtained by conventional extraction with 1 M KOH/methanol at 70 °C for 4 h were obtained, even at 100 °C for 10 min. The concentrations obtained by using MeOH at 150 °C for 30 min without KOH were lower (by 1.3-37%) than those obtained by alkaline-MAE at 150 °C for 30 min. Since the developed technique can introduce higher concentration of benzo[ghi]perylene relative to those using pressurized liquid extraction (toluene, 150 °C, 15 MPa, 10 min, two cycles), the developed alkaline-MAE is a effective technique.     

Bio-oil production from Onopordum acanthium L. by slow pyrolysis

In this study, the usability of the plant thistle, Onopordum acanthium L., belonging to the family Asteraceae (Compositae), in liquid fuel production has been investigated. The experiments were performed in a fixed-bed Heinze pyrolysis reactor to investigate the effects of heating rate, pyrolysis temperature and sepiolite percentage on the pyrolysis product yields and chemical compositions. Experiments were carried out in a static atmosphere with a heating rate of 7 °C/min and 40 °C/min, pyrolysis temperature of 350, 400, 500, 550 and 700 °C and particle size of 0.6 < D_p < 0.85 mm. Catalyst experiments were conducted in a static atmosphere with a heating rate of 40 °C/min, pyrolysis temperature of 550 °C and particle size of 0.6 < D_p < 0.85 mm. Bio-oil yield increased from 18.5% to 27.3% with the presence of 10% of sepiolite catalyst at pyrolysis temperature of 550 °C, with a heating rate of 40 °C/min, and particle size of 0.6 < D_p < 0.85 mm. It means that the yield of bio-oil was increased at around 48.0% after the catalyst added. Chromatographic and spectroscopic studies on the bio-oil showed that the oil obtained from O. acanthium L. could be used as a renewable fuels and chemical feedstock.     

Investigation of temperature-responsivity and aqueous chromatographic characteristics of a thermo-responsive monolithic column

A thermo-responsive and macroporous monolithic cryogel was directly prepared by in situ free-radical redox cryo-polymerization in a stainless steel chromatographic column (100 mm × 4.6 mm i.d.) using N-isopropylacrylamide (NIPAAm) as functional monomer and PEG-20,000 as porogen at −12 °C. The internal morphology of resulting monolithic cryogel was estimated by scanning electron microscopy (SEM). Based on that, a submicron skeleton structure was observed. Besides, the gravimetrically determined rates of swelling/deswelling for thermo-responsive monolithic cryogel were much higher than that of hydrogel adopting the same component proportion via conventional method (25 °C for 24 h). Simultaneously, a temperature-dependent resolution of steroids was also achieved using only water as a mobile phase. The theoretical plate number of every analyte was more than 2000.     

High-pressure transitions in MgAl2O4 and a new high-pressure phase of Mg2Al2O5

Phase transitions in MgAl₂O₄ were examined at 21-27 GPa and 1400-2500 °C using a multianvil apparatus. A mixture of MgO and Al₂O₃ corundum that are high-pressure dissociation products of MgAl₂O₄ spinel combines into calcium-ferrite type MgAl₂O₄ at 26-27 GPa and 1400-2000 °C. At temperature above 2000 °C at pressure below 25.5 GPa, a mixture of Al₂O₃ corundum and a new phase with Mg₂Al₂O₅ composition is stable. The transition boundary between the two fields has a strongly negative pressure-temperature slope. Structure analysis and Rietveld refinement on the basis of the powder X-ray diffraction profile of the Mg₂Al₂O₅ phase indicated that the phase represented a new structure type with orthorhombic symmetry (Pbam), and the lattice parameters were determined as a=9.3710(6) Å, b=12.1952(6) Å, c=2.7916(2) Å, V=319.03(3) Å³, Z=4. The structure consists of edge-sharing and corner-sharing (Mg, Al)O₆ octahedra, and contains chains of edge-sharing octahedra running along the c-axis. A part of Mg atoms are accommodated in six-coordinated trigonal prism sites in tunnels surrounded by the chains of edge-sharing (Mg, Al)O₆ octahedra. The structure is related with that of ludwigite (Mg, Fe²⁺)₂(Fe³⁺, Al)(BO₃)O₂. The molar volume of the Mg₂Al₂O₅ phase is smaller by 0.18% than sum of molar volumes of 2MgO and Al₂O₃ corundum. High-pressure dissociation to the mixture of corundum-type phase and the phase with ludwigite-related structure has been found only in MgAl₂O₄ among various A²⁺B³⁺₂O₄ compounds.