A water-soluble PPDO/PEG alternating multiblock copolymer: Synthesis, characterization, and its gel-sol transition behavior

Biodegradable and nontoxic alternating multiblock copolymers based on poly (p-dioxanone) (PPDO) and poly (ethylene glycol) (PEG) were synthesized by the coupling reaction of two bifunctional prepolymers, a dihydroxyl-terminated PPDO and dicarboxylated PEG. The prepolymers and the resulting PPDO/PEG multiblock copolymers were characterized by various analytical techniques such as FT-IR, ¹H NMR, GPC, DSC and TG. At high concentration levels above critical gelation concentration (CGC), the aqueous solution of copolymers formed a gel. Temperature-sensitive gel to sol transition behaviors were investigated by the test tube inverting method. Dynamic light scattering (DLS) was used to investigate the micelle of copolymers, whose association probably caused the gelation of the system. Therefore, this novel copolymer has a great potential in injectable drug-delivery system for long-term delivery of drugs.     

Nonisothermal crystallization and melting behavior of the copolymer derived from p-dioxanone and poly(ethylene glycol)

Nonisothermal crystallization and melting behaviors of poly(p-dioxanone)(PPDO)-b-poly(ethylene glycol)(PEG) with mole ratios of 80:20 and 30:70, has been studied by differential scanning calorimeter using various cooling rates. Crystallization behavior of each crystallizable segments of the copolymer was compared with the corresponding segment of homopolymer. For a given composition, the crystallization process began at higher temperature when the slower scanning rates were used. The kinetics of the PPDO segments and the PEG segments in the copolymers under nonisothermal crystallization conditions were analyzed by Ozawa equation and also the crystallization results of the copolymer segments were compared with the corresponding homopolymers. The results showed that the Ozawa equation fails to describe the whole crystallization process of the copolymer segments along with PPDO homopolymer, but describes the crystallization behavior of the PEG homopolymer. Crystallization activation energy and absolute crystallinity values were estimated from the cooling scans (using Kissinger’s method) and fusion endotherms of the subsequent heating scans, respectively.     

The influence of UV light on collagen/poly(ethylene glycol) blends

The photodegradation behaviour of the collagen and poly(ethylene glycol) PEG blends has been studied by Fourier transform infrared spectroscopy (FTIR), UV-Vis spectroscopy and viscometry. Surface properties before and after UV irradiation were observed using optical microscope.Collagen and PEG were immiscible and the films obtained from the mixture were fragile with poor mechanical properties. The photochemical stability of the collagen and PEG blend was different from that of the single components. In general collagen/PEG blends are less stable under UV irradiation than pure collagen. The influence of PEG on the photochemical stability of collagen depends on its concentration in the blend. Microscope photographs showed that the surface characteristics of collagen and collagen/PEG blends in film form are not drastically altered after UV irradiation.     

Amphiphilic biodegradable poly(CL-b-PEG-b-CL) triblock copolymers prepared by novel rare earth complex: Synthesis and crystallization properties

Amphiphilic biodegradable poly(CL-b-PEG-b-CL) triblock copolymers have been successfully prepared by the ring-opening polymerization of ε-caprolactone (CL) employing yttrium tris(2,6-di-tert-butyl-4-methylphenolate) [Y(DBMP)₃] as catalyst and double-hydroxyl capped PEGs (DHPEG) as macro-initiator. The triblock architecture, molecular weight, thermal and crystallization properties of the copolymers were characterized by NMR spectra, SEC, DSC and WAXD analyses. The isothermal crystallization behavior of the copolymers was investigated by POM analysis in detail, which is greatly influenced by the length of PCL and PEG blocks. On the POM micrograph of PEG_10,000-(PCL₈₆₀₀)₂, a unique morphology of concentric spherulites was observed due to the sequent crystallization of the PCL and PEG blocks.     

Crystallization and melting behavior of poly(ethylene oxide)/poly(n-butyl methacrylate) blends

The phase diagram, crystallization and melting behavior of poly(ethylene oxide) (PEO)/poly(n-butyl methacrylate) (PnBMA) blends have been investigated using differential scanning calorimetry and optical microscopy. The results show that the blends are miscible up to 85 °C and show an lower critical solution temperature-type demixing at a higher temperature. The isothermal crystallization studies of the blends indicate a reduction in the overall rate of crystallization. Analysis of isothermal crystallization data by means of Avrami equation leads to average values of the Avrami index of 2.5 for pure PEO and 3.0 for the different blend compositions. The melting behavior of the blends reveals double endotherms, which is ascribed to both secondary crystallization and recrystallization. The melting point depression study yielded χ₁₂=0, indicating a relatively low interaction strength.     

A facile approach to preparation of long-chain-branched poly(p-dioxanone)

Long-chain-branched poly(p-dioxanone)s (LCB-PPDOs) with different branch densities were prepared via the chain-extending reaction of hydroxyl group terminated linear bi-functional PPDO (2a-PPDO) and star-like tri-functional PPDO (3a-PPDO) prepolymers, which were synthesized by the ring-opening polymerization of p-dioxanone (PDO) using 1,4-butanediol (BD) and trimethylolpropane (TMP) as multi-functional initiators, respectively. The undesirable gelation was successfully depressed by adjusting the chain length and feed ratio of prepolymers. The average molecular weight between branch points (M_b) and the average number of branch per 100,000 g/mol (B_n) of LCB-PPDOs were calculated from the ¹H NMR spectra. The average number of branch ranged from 0 to 6.72 branch points per 100,000 g/mol, and the number-average molecular weights between branch points ranged from 6900 to 20,500 g/mol. The results of differential scanning calorimetry (DSC) showed that the crystallization behavior of LCB-PPDOs was changed evidently with the branch density. Small-amplitude dynamic oscillatory rheometer was used to investigate the rheological properties of the melts of LCB-PPDO including zero-shear viscosity, storage modulus, relaxation times and loss angle, which largely depended on the branch density and length of LCB-PPDOs. Therefore, the rheological behaviors of PPDO can be well-controlled via synthesizing LCB-PPDOs with the desired architectures.     

Nonisothermal crystallization kinetics and melting behavior of bimodal medium density polyethylene/low density polyethylene blends

Nonisothermal crystallization kinetics and melting behavior of bimodal-medium-density- polyethylene (BMDPE) and the blends of BMDPE/LDPE were studied using differential scanning calorimetry (DSC) at various scanning rates. The Avrami analysis modified by Jeziorny and a method developed by Mo were employed to describe the nonisothermal crystallization process of BMDPE. The BMDPE DSC data were analyzed by the theory of Ozawa. Kinetic parameters such as the Avrami exponent (n), the kinetic crystallization rate constant (Z_c), the peak temperatures (T_p) and the half-time of crystallization (t_1/2) etc. were determined at various scanning rates. The appearance of double melting peaks and the double crystallization peaks in the heating and cooling DSC curves of BMDPE/LDPE blends indicated that the BMDPE and LDPE could crystallize respectively.     

聚氧化乙烯梳状聚合物共混物的非等温结晶动力学

用ＤＳＣ方法对乙烯基甲醚／马来酸酐交替共聚物多缩乙二醇酯（ＣＢＰ） 聚氧化乙烯（ＰＥＯ）共混体系的非等温结晶动力学进行了研究，用Ｍａｎｄｅｌｋｅｒｎ、Ｚ Ｊ（Ｚｉａｂｉｋｉ Ｊｅｚｉｏｒｎｙ）、Ｏｚａｗａ和对Ｏｚａｗａ方法的一种修正方法对该体系进行了处理．结果表明：得到了一种既没有结晶又有较多ＥＯ单元含量的共混物，ＣＢＰ对ＰＥＯ的结晶有抑制作用．Ａｖｒａｍｉ指数随冷却速率的加快在３８～５７之间波动．Ｍａｎｄｅｌｋｅｒｎ方法求得的结晶动力学参数Ｚｃ随冷却速率的增加而增加，共混物的Ｇｃ值不随冷却速率的变化而变化，随ＰＥＯ含量增加而减少，处理结果表明而Ｚ Ｊ理论能较好地解释本体系的非等温结晶过程和机理．     

Chemoselective immobilization of biomolecules through aqueous Diels-Alder and PEG chemistry

Aqueous Diels-Alder chemistry combined with a poly(ethylene glycol) (PEG) spacer was used to immobilize a diverse group of biomolecules onto a solid surface. Briefly, α, ω linear PEG conjugates were synthesized containing cyclopentadiene in the α position and either biotin, lactose, or protein A in the ω position. Linkers were coupled to N-maleimide (EMC)-functionalized glass substrates, and surface immobilization of biomolecules was confirmed by confocal fluorescence imaging.     

PET分子量对PET/PC共混体系高压结晶行为的影响

以往高压合成的聚合物伸直链晶体尺寸较小且合成时间过长,不能满足单晶应用的要求。加入10wt%PC于不同分子量的PET中,采用自制高压装置,制备共混体系,用WAXD,SEM,DSC等表征手段,研究了PET/PC共混体系在高压下的结晶行为。研究结果表明:通过PET/PC体系在高压下化学反应诱导的自组装,不同分子量PET的PET/PC共混体系均在较短的时间内生成了尺寸较大的聚酯伸直链晶体,对应于三斜晶系,其中PET/PC体系最适于大尺寸伸直链晶体的合成,仅需6hr时间即生成PE需200hr方可合成的40μm厚度的伸直链晶体。同时提出了PET1/PC体系中伸直链晶体高温下缺陷自我修复模型。     

Nonisothermal crystallization kinetics and spherulite morphology of poly(trimethylene terephthalate)

The nonisothermal melt crystallization behavior of poly(trimethylene terephthalate) (PTT) was investigated using the DSC technique. PTT peak exothermic crystallization temperature was found to move to lower temperatures as the cooling rate was increased. The modified Avrami equation exponent, n, was 4 when the cooling rates were between 5 and 15 °C/min, indicating a thermal nucleation and a three-dimensional spherical growth mechanism. When the cooling rate was increased to 25 °C/min, n gradually decreased to near 3, implying the nucleation mechanism changed to an athermal mode. PTT nonisothermal crystallization behavior could also be analyzed using the Ozawa equation and the combined equations of Ozawa and Avrami with very good fit of the data.PTT spherulite morphologies and the sign of the birefringence depended strongly on the spherulite's growth temperature. When the growth temperature was decreased from 222 to 170 °C, the spherulite changed from a saturation-type dendritic morphology to one with a colorful banded texture; the sign of the birefringence also changed in the following order: from a weakly positive spherulite → mixed spherulite → weakly negative spherulite → negative spherulite → positive spherulite → negative spherulite → positive spherulite.     

Aqueous solution behavior of p(N-isopropyl acrylamide) in the presence of water-soluble macromolecular species

We report here the polymerization of N-isopropyl acrylamide (NIPAM) via the reversible addition fragmentation chain transfer (RAFT) process. Two trithiocarbonates (S,S′-bis(α,α′-dimethyl-α″-acetic acid)-trithiocarbonate and 2-dodecylsulfanylthiocarbonylsulfanyl-2-methyl propionic acid) were used as the chain transfer agents in conjunction with 4,4′-azobis(4-cyanovaleric acid) and 2,2′azobis(2-methylpropionamidine) dihydrochloride as the initiating species. Poly(NIPAM) is a thermo-responsive polymer that has a sharp lower critical solution temperature (LCST). Herein, we investigated the aqueous solution behaviour of well defined p(NIPAM) prepared by the RAFT process as a function of molecular weight (degree of polymerization: 50, 100 and 200) and temperature. Furthermore, we examine the influence of varying concentrations of macromolecular species (neutral polyethylene glycol (M_n - 3400 g/mol) and ionic bovine serum albumin (M_n - 63 000 g/mol)) on the LCST of p(NIPAM). The aqueous solution behaviour was assessed by spectrophotometry, dynamic light scattering and surface tensiometry. The macromolecular additives was found to have a significant effect on the coil to globular transition of the lower molecular weight p(NIPAM).     

A new approach to prepare high molecular weight poly(p-dioxanone) by chain-extending from dihydroxyl terminated propolymers

As poly(p-dioxanone) (PPDO) with a high molecular weight (viscosity-average molecular weight (M_ν) > 100,000 g/mol) is not easy to be obtained in a short time, a new approach has been developed to produce high molecular weight poly(p-dioxanone) (HPPDO-T) by chain-extending reaction of hydroxyl-terminated PPDO (HPPDO) prepolymers using toluene-2,4-diisocyanate (TDI) as chain extender. Here HPPDO prepolymers were synthesized via ring-opening polymerization of p-dioxanone (PDO) monomer initiated by 1,4-butanediol (BD) with Stannous octoate (SnOct₂) as catalyst. The resulting polymers, having a highest M_ν of 250,000 g/mol, were characterized by ¹H NMR, TG, DSC and WXRD. HPPDO prepolymers can react with TDI more effectively than the PPDO prepolymers initiated by mono-functional initiators, and the molecular weights of resulting chain-extended products increase several decade times in an hour comparing to the prepolymers. The chain extended products HPPDO-T have better thermal stability, and higher glass transition temperatures and lower crystallization rates than PPDO homopolymer.     

Morphology and structure of poly(p-dioxanone)

The morphology of solution grown single crystals of poly(p-dioxanone) was investigated. Different crystallization conditions (solvent, precipitant agent and temperature) were tested. Dendritic growth, screw dislocations and striations were observed. Crystals usually exhibited a lozenge morphology, whose apex angle changed with the crystallization conditions. In all cases, however, a single crystal electron diffraction pattern was recorded. Spherulitic morphologies were obtained by evaporation of formic acid solutions. Lamellae gave rise to well resolved electron diffraction patterns that allowed determination of the main packing characteristics. Patterns of tilted specimens helped establish an orthorhombic unit cell, whose parameters indicate a deviation from the all trans molecular conformation. Quantum mechanical calculations were performed on small model compounds to study the conformational preferences. Simulated diffraction patterns were consistent with a unit cell containing four repeat units and a P2₁2₁2₁ space group. Molecular packing suggests the existence of different kinds of folds for an assumed adjacent reentry. Polyethylene decoration hardly highlighted a crystal sectorization. Also enzymatic degradation of lamellar crystals was evaluated by using a Pseudomonas cepacia lipase.     

Nonisothermal crystallization and morphology of poly(butylene succinate)/layered double hydroxide nanocomposites

Biodegradable poly(butylene succinate) (PBS) and layered double hydroxide (LDH) nanocomposites were prepared via melt blending in a twin-screw extruder. The morphology and dispersion of LDH nanoparticles within PBS matrix were characterized by transmission electron microscopy (TEM), which showed that LDH nanoparticles were found to be well distributed at the nanometer level. The nonisothermal crystallization behavior of nanocomposites was extensively studied using differential scanning calorimetry (DSC) technique at various cooling rates. The crystallization rate of PBS was accelerated by the addition of LDH due to its heterogeneous nucleation effect; however, the crystallization mechanism and crystal structure of PBS remained almost unchanged. In kinetics analysis of nonisothermal crystallization, the Ozawa approach failed to describe the crystallization behavior of PBS/LDH nanocomposites, whereas both the modified Avrami model and the Mo method well represented the crystallization behavior of nanocomposites. The effective activation energy was estimated as a function of the relative degree of crystallinity using the isoconversional analysis. The subsequent melting behavior of PBS and PBS/LDH nanocomposites was observed to be dependent on the cooling rate. The POM showed that the small and less perfect crystals were formed in nanocomposites.     

Fire retardant poly(ethylene terephthalate)/polycarbonate/triphenyl phosphite blends

Flame retardant recycled PET blends containing PC and triphenyl phosphite (TPP) have been designed using the following sequential processing strategy: PET and PC are first melt blended with a transesterification catalyst, allowing the compatibilisation of the blend, before adding TPP. The presence of this last component was shown to stop the transesterification reaction between PET and PC, avoiding chain breaking. In addition, TPP acts as a chain extender of PET, allowing the average chain length to be increased. The optimized blends obtained present “V-0” UL94 rating due to a better thermal stability leading to low flammability and to the development of an important, stable and covering char layer, resulting in self-extinguishability and very low Heat Release Rates during combustion.     

Reaction to fire of recycled poly(ethylene terephthalate)/polycarbonate blends

In the present paper, we study the effect of both morphology and compatibilization on the reaction to fire of blends of recycled poly(ethylene terephthalate) (PETr) with recycled polycarbonate (PCr). It is shown that while the flame retardancy of blends containing less than 50% w/w of PCr increases almost linearly with PCr content, blends containing more than 50% w/w of PCr react to fire like pure PCr. This change of reaction to fire correlates with the formation of a continuous PCr phase in the blend.The compatibilization of the blend by a trans-esterification reaction leading to the formation of copolymers at the interface decreases the overall fire performances due to PETr chain breaking as a side effect which results in a strong decrease of blend viscosity and of the temperature at which mass loss begins.     

Non-isothermal crystallization kinetics of poly(trimethylene terephthalate)/poly(ethylene 2,6-naphthalate) blends

The glass-transition temperature and non-isothermal crystallization of poly(trimethylene terephthalate)/poly(ethylene 2,6-naphthalate) (PTT/PEN) blends were investigated by using differential scanning calorimeter (DSC). The results suggested that the binary blends showed different crystallization and melting behaviors due to their different component of PTT and PEN. All of the samples exhibited a single glass-transition temperature, indicating that the component PTT and PEN were miscible in amorphous phase. The value of T_g predicted well by Gordon-Taylor equation decreased gradually with increasing of PTT content. The commonly used Avrami equation modified by Jeziorny, Ozawa theory and the method developed by Mo were used, respectively, to fit the primary stage of non-isothermal crystallization. The kinetic parameters suggested that the PTT content improved the crystallization of PEN in the binary blend. The crystallization growth dimension, crystallization rate and the degree of crystallinity of the blends were increased with the increasing content of PTT. The effective activation energy calculated by the advanced iso-conversional method developed by Vyazovkin also concluded that the value of E_a depended not only on the system but also on temperature, that is, the binary blend with more PTT component had higher crystallization ability and the crystallization ability is increased with increasing temperature. The kinetic parameters U^* and K_g were also determined, respectively, by the Hoffman-Lauritzen theory.     

Formation of nanoporous poly(aryl amide ether) (PAAE) films by selective removal of poly(ethylene glycol) (PEG) from PEG/PAAE composite films

Poly(aryl amide ether) (PAAE) thin films with nanometer-sized pores have been prepared in two steps: (1) solution casting of partially miscible poly(ethylene glycol) (PEG)/PAAE blends from one of their common solvents, dimethyl sulfoxide (DMSO), results in formation of PEG/PAAE nanocomposite films; (2) selective removal of PEG component by water washing yields nanosized, porous PAAE films. The pores have been found to have a small size variation and cover the whole surface homogeneously. With an increase in PEG contents, the sizes of the pores increase but the size distributions do not have much changes. This has been ascribed to formation of small PEG domains in PEG/PAAE composite films, which is facilitated by the strong interactions, mostly hydrogen bonds, between PEG and PAAE macromolecular chains.     

Effect of temperature on the intrinsic viscosity of poly(ethylene glycol)/poly(vinyl pyrrolidone) blends in aqueous solutions

In this work the intrinsic viscosity of poly(ethylene glycol)/poly(vinyl pyrrolidone) blends in aqueous solutions were measured at 283.1–313.1 K. The expansion factor of polymer chain was calculated by use of the intrinsic viscosities data. The thermodynamic parameters of polymer solution (the entropy of dilution parameter, the heat of dilution parameter, theta temperature, polymer–solvent interaction parameter and second osmotic virial coefficient) were evaluated by temperature dependence of polymer chain expansion factor. The obtained thermodynamic parameters indicate that quality of water was decreased for solutions of poly(ethylene oxide), poly(vinyl pyrrolidone) and poly(ethylene oxide)/poly(vinyl pyrrolidone) blends by increasing temperature. Compatibility of poly(ethylene oxide)/poly(vinyl pyrrolidone) blends were explained in terms of difference between experimental and ideal intrinsic viscosity and solvent–polymer interaction parameter. The results indicate that the poly(ethylene glycol)/poly(vinyl pyrrolidone) blends were incompatible.