Tetrakis(4-pyridyl)porphyrin supramolecular complexes with cyclodextrins in aqueous solution

The formation of inclusion complexes of hydroxypropyl-beta-cyclodextrin, heptakis(2,6-di-O-methyl)-beta-cyclodextrin and heptakis(2,3,6-tri-O-methyl)-beta-cyclodextrin with 5,10,15,20-tetrakis(4-pyridyl)porphyrin (TpyP) has been studied in aqueous buffer solution (phosphate buffer pH = 7 and I = 0.01 M) to give a structural and spectroscopic characterization of a new class of potential sensitizers for photodynamic therapy. The interaction was investigated by a combination of UV/Vis absorption, fluorescence anisotropy, time-resolved fluorescence and circular dichroism. The experimental results point to the presence of the pigment in water in a monomeric complexed form. The fluorescence anisotropy measurements suggest that TpyP forms 1:1 complexes with heptakis(2,3,6-tri-O-methyl)-beta-cyclodextrin and hydroxypropyl-beta-cyclodextrin, while 1:2 complexes are obtained with heptakis(2,6-di-O-methyl)-beta-cyclodextrin.     

Cyclodextrins as carriers for cinchona alkaloids: a pH-responsive selective binding system

A series of cyclodextrin-cinchona alkaloid inclusion complexes were prepared from beta-cyclodextrin, heptakis(2,6-di-O-methyl)-beta-cyclodextrin and heptakis(2,3,6-tri-O-methyl)-beta-cyclodextrin and four cinchona alkaloids in ca. 90% yields, and their inclusion complexation behavior was investigated at pH 7.2 and 1.5 by means of fluorescence, UV/Vis and 2D NMR spectroscopy. The results showed that the cinchona alkaloids can be efficiently encapsulated in the cyclodextrin cavity in an acidic environment and sufficiently released in a neutral environment, which makes these cyclodextrin derivatives the potential carriers for cinchona alkaloids. The binding ability and molecular selectivity of cyclodextrins toward cinchona alkaloids were discussed from the viewpoint of the size-fit concept and multiple recognition mechanism between host and guest.     

Separation of stereoisomers of some terpene derivatives by capillary gas chromatography-mass spectrometry and high-performance liquid chromatography using beta-cyclodextrin derivative columns

Gas chromatographic separations of the stereoisomers of menthol derivatives, important intermediates in the synthesis of physiologically active natural products, were carried out on several substituted beta-cyclodextrin (CD) columns, including per-O-methyl-beta-cyclodextrin (PME-beta-CD), heptakis(2,3-di-O-acetyl-6-tert-butyldimethylsilyl)-beta-CD (DIAC-6-TBDS-beta-CD), and heptakis(2,3-di-O-methyl-6-tert-butyldimethylsilyl)-beta-CD (DIME-6-TBDS-beta-CD) as chiral stationary phases (CSPs). With the DIME-6-TBDS-beta-CD column, a separation of the Z- and E-isomers of methylidenementhol was accomplished; no separation was achieved with the other columns. The stereoisomers of methylidenementhol and the corresponding tert-butyldimethylsilyl (TBS) ether were separated on both the beta-CD and the heptakis(2,3,6-tri-O-methyl)-beta-cyclodextrin (TME-beta-CD) columns by high-performance liquid chromatography (HPLC) with a mobile phase involving acetonitrile and H(2)O. For the separation of the Z- and E-isomers of methylidenementhol, the TME-beta-CD column was superior. In contrast, the beta-CD column was preferable in the case of the corresponding TBS ether.     

Exploring the interaction of ruthenium(II) polypyridyl complexes with DNA using single-molecule techniques

Here we explore DNA binding by a family of ruthenium(II) polypyridyl complexes using an atomic force microscope (AFM) and optical tweezers. We demonstrate using AFM that Ru(bpy)2dppz2+ intercalates into DNA (K(b) = 1.5 x 10(5) M(-1)), as does its close relative Ru(bpy)2dppx2+ (K(b) = 1.5 x 10(5) M(-1)). However, intercalation by Ru(phen)3(2+) and other Ru(II) complexes with K(b) values lower than that of Ru(bpy)2dppz2+ is difficult to determine using AFM because of competing aggregation and surface-binding phenomena. At the high Ru(II) concentrations required to evaluate intercalation, most of the DNA strands acquire a twisted, curled conformation that is impossible to measure accurately. The condensation of DNA on mica in the presence of polycations is well known, but it clearly precludes the accurate assessment by AFM of DNA intercalation by most Ru(II) complexes, though not by ethidium bromide and other monovalent intercalators. When stretching individual DNA molecules using optical tweezers, the same limitation on high metal concentration does not exist. Using optical tweezers, we show that Ru(phen)2dppz2+ intercalates avidly (K(b) = 3.2 x 10(6) M(-1)) whereas Ru(bpy)3(2+) does not intercalate, even at micromolar ruthenium concentrations. Ru(phen)3(2+) is shown to intercalate weakly (i.e., at micromolar concentrations (K(b) = 8.8 x 10(3) M(-1))). The distinct differences in DNA stretching behavior between Ru(phen)3(2+) and Ru(bpy)3(2+) clearly illustrate that intercalation can be distinguished from groove binding by pulling the DNA with optical tweezers. Our results demonstrate both the benefits and challenges of two single-molecule methods of exploring DNA binding and help to elucidate the mode of binding of Ru(phen)3(2+).     

Separation of drug enantiomers by capillary electrophoresis in the presence of neutral cyclodextrins

This is a selected review, highlighting our results obtained in an extended screening program ("The German-Chinese Drug Screening Program"), with a focus on a set of original data obtained with heptakis(2,3,6-tri-O-methyl)-beta-cyclodextrin (TM-beta-CD) as the chiral solvating agent (CSA). The enantioseparation of 86 drugs by capillary zone electrophoresis in the presence of this CSA was successful for 47 drugs. The migration separation factors (alpham) and the migration retardation factors (Rm) were compared with those found for native beta-cyclodextrin (beta-CD). The patterns thus obtained were also compared with those observed for hexakis(2,3,6-tri-O-methyl)-alpha-CD (TM-alpha-CD) and octakis(2,3,6-tri-O-methyl)-gamma-CD (TM-gamma-CD), respectively. From the statistical data, it can be concluded that there is a remarkable influence of the analyte structure on the electrophoretic data. A substructure 4H was found in the analyte structure that has a significant influence on the analytes' behaviour. Thus, analytes bearing the substructure 4H do not only have a strong affinity to the CDs but also a high rate of success of chiral separation in all systems reviewed. In light of this, the different ring sizes of native cyclodextrins (alpha-, beta- and gamma-CD) readily explain their behaviour towards a limited test set of chiral drugs. Sterical considerations point to the significance of side-on-binding versus inclusion in the cavity of the host. In addition to the findings from the screening program, numerous references to the literature are given.     

溶胶-凝胶法制备四种环糊精衍生物毛细管气相色谱柱

采用溶胶-凝胶法制备了七(2,3,6-三-O-乙基)-β-环糊精(全乙基-β-CD)、七(2,3,6-三-O-丙基)-β-环糊精(全丙基-β-CD)、七(2,3,6-三-O-辛基)-β-环糊精(全辛基-β-CD)和2,6-二-O-苄基-β-CD 4种环糊精衍生物毛细管气相色谱柱。在制备方法上,仿照一般动态法,大大简化了制备过程,缩短了制备时间。所得色谱柱的理论塔板数在3000/m左右,能够很好地分离苯衍生物的位置异构体,尤其对难分离的二甲苯、甲酚等取得了理想效果(α＞1),其中溶胶-凝胶法制备的全烷基(乙基、丙基、辛基)化环糊精衍生物柱的分离能力优于2,6位苄基衍生化的环糊精柱。 同一根柱不同次进样和不同柱之间表现出良好的重复性,保留时间的相对标准偏差小于8.5%;对使用大约40次后的溶胶-凝胶柱重新进行测试,柱效下降不明显,说明该类色谱柱的稳定性良好。     

Effects of cyclodextrins on the complexation between Methylene Blue and tetrakis(4-sulfonatophenyl)porphyrin in aqueous solutions

In aqueous solutions buffered at pH 10.1, Methylene Blue (MB) forms a complex with tetrakis(4-sulfonatophenyl)porphyrin (TSPP). The equilibrium constant for the formation of the MB-TSPP complex has been evaluated to be 2.35 x 10(5) mol(-1) dm3 from the fluorescence quenching of MB by TSPP. Effects of alpha-, beta-, and gamma-cyclodextrin (CD), and heptakis(2,3,6-tri-O-methyl)-beta-cyclodextrin on the complexation between MB and TSPP have been examined by means of absorption and fluorescence spectroscopy. The binding of CDs to TSPP and/or MB in the MB-TSPP complex causes the dissociation of the MB-TSPP complex.     

Novel behavior of O-methylated beta-cyclodextrins in inclusion of meso-tetraarylporphyrins

[structure: see text] The mechanism for formation of extremely stable 1:2 inclusion complexes of water-soluble meso-tetraarylporphyrins with heptakis(2,3,6-tri-O-methyl)-beta-cyclodextrin (TMe-beta-CD) in aqueous solutions has been studied by means of NMR spectroscopy and isothermal titration calorimetry. To simplify the system, 5,10,15-tris(3,5-dicarboxylatophenyl)-20-phenylporphyrin (1) was used as a guest porphyrin, because 1 forms only a 1:1 inclusion complex with cyclodextrin (CD). As host compounds, native beta-CD and the O-methylated-beta-CDs such as heptakis(2,3-di-O-methyl)- (2,3-DMe-beta-CD), heptakis(2,6-di-O-methyl)- (2,6-DMe-beta-CD), and TMe-beta-CDs were used. The thermodynamic parameters for complexation such as binding constants (K) and enthalpy (DeltaH degrees ) and entoropy changes (DeltaS degrees ) were determined by means of isothermal titration calorimetry. The K value for complexation of 1 with CD increases in the order beta-CD (K = (1.2 +/- 0.1) x 10(3) M(-)(1)) < 2,6-DMe-beta-CD ((1.2 +/- 0.1) x 10(4) M(-)(1)) < TMe-beta-CD ((6.9 +/- 0.4) x 10(6) M(-)(1)) < 2,3-DMe-beta-CD ((8.5 +/- 0.5) x 10(6) M(-)(1)), indicating participation of the secondary OCH(3) groups in extremely strong complexation of 1 with CD. Complex formation of 1 with beta-CD and 2,6-DMe-beta-CD is an enthalpically and entropically favorable process, while that with TMe-beta-CD and 2,3-DMe-beta-CD is an enthalpically much more favorable but an entropically less favorable process. The thermodynamic parameters suggest that inclusion of 1 into the cavities of TMe-beta-CD and 2,3-DMe-beta-CD is promoted by van der Waals interactions, which are stronger than those in the cases of beta-CD and 2,6-DMe-beta-CD. (13)C NMR spectra show that the conformations of both TMe-beta-CD and 2,3-DMe-beta-CD are altered upon inclusion of 1, while those of beta-CD and 2,6-DMe-beta-CD are mostly retained. On the basis of these results, it can be concluded that induced-fit type complexation of 1 with TMe-beta-CD and 2,3-DMe-beta-CD causes extremely strong binding of the host to the guest.     

General approach to the synthesis of persubstituted hydrophilic and amphiphilic beta-cyclodextrin derivatives.

Heptakis(2,3,6-tri-O-allyl)-beta-cyclodextrin 2 was converted to heptakis[2,3,6-tri-O-(2,3-dihydroxypropyl)]-beta-cyclodextrin 3 by osmium tetroxide-catalyzed dihydroxylation. A diastereomeric mixture of 3 was treated with sodium periodate followed by sodium borohydride to give heptakis[2,3,6-tri-O-(2-hydroxyethyl)]-beta-cyclodextrin 5 in 86% yield. Compound 5 could be quantitatively transformed into heptakis(2,3,6-tri-O-carboxymethyl)-beta-cyclodextrin 6 by TEMPO-mediated oxidation. The same reaction sequence was also applied to heptakis(2,6-di-O-allyl-3-O-methyl)-beta-cyclodextrin 8, heptakis(2,3-di-O-allyl-6-O-methyl)-beta-cyclodextrin 12, and heptakis(2,3-di-O-allyl-6-O-butyl)-beta-cyclodextrin 16; the analogous corresponding hydroxyethyl and carboxymethyl derivatives were isolated in high yields. All products were proved to be chemically uniform.     

Electrochemiluminescent peptide nucleic acid-like monomers containing Ru(II)-dipyridoquinoxaline and Ru(II)-dipyridophenazine complexes

A series of Ru(II)-peptide nucleic acid (PNA)-like monomers, [Ru(bpy)(2)(dpq-L-PNA-OH)](2+) (M1), [Ru(phen)(2)(dpq-L-PNA-OH)](2+) (M2), [Ru(bpy)(2)(dppz-L-PNA-OH)](2+) (M3), and [Ru(phen)(2)(dppz-L-PNA-OH)](2+) (M4) (bpy = 2,2'-bipyridine, phen = 1,10-phenanthroline, dpq-L-PNA-OH = 2-(N-(2-(((9H-fluoren-9-yl)methoxy)carbonylamino)ethyl)-6-(dipyrido[3,2-a:2',3'-c]phenazine-11-carboxamido)hexanamido)acetic acid, dppz-L-PNA-OH = 2-(N-(2-(((9H-fluoren-9-yl) methoxy)carbonylamino)ethyl)-6-(dipyrido[3,2-f:2',3'-h]quinoxaline-2-carboxamido)acetic acid) have been synthesized and characterized by IR and (1)H NMR spectroscopy, mass spectrometry, and elemental analysis. As is typical for Ru(II)-tris(diimine) complexes, acetonitrile solutions of these complexes (M1-M4) show MLCT transitions in the 443-455 nm region and emission maxima at 618, 613, 658, and 660 nm, respectively, upon photoexcitation at 450 nm. Changes in the ligand environment around the Ru(II) center are reflected in the luminescence and electrochemical response obtained from these monomers. The emission intensity and quantum yield for M1 and M2 were found to be higher than for M3 and M4. Electrochemical studies in acetonitrile show the Ru(II)-PNA monomers to undergo a one-electron redox process associated with Ru(II) to Ru(III) oxidation. A positive shift was observed in the reversible redox potentials for M1-M4 (962, 951, 936, and 938 mV, respectively, vs Fc(0/+) (Fc = ferrocene)) in comparison with [Ru(bpy)(3)](2+) (888 mV vs Fc(0/+)). The ability of the Ru(II)-PNA monomers to generate electrochemiluminescence (ECL) was assessed in acetonitrile solutions containing tripropylamine (TPA) as a coreactant. Intense ECL signals were observed with emission maxima for M1-M4 at 622, 616, 673, and 675 nm, respectively. At an applied potential sufficiently positive to oxidize the ruthenium center, the integrated intensity for ECL from the PNA monomers was found to vary in the order M1 (62%) > M3 (60%) > M4 (46%) > M2 (44%) with respect to [Ru(bpy)(3)](2+) (100%). These findings indicate that such Ru(II)-PNA bioconjugates could be investigated as multimodal labels for biosensing applications.     

pH-dependence of complexion constants and complex mobility in capillary electrophoresis separations of dipeptide enantiomers

The chiral separation of the LL- and DD-enantiomers of the dipeptides Ala-Tyr, Phe-Phe, and Asp-PheOMe has been investigated at pH 2.5 and pH 3.5 using beta-cyclodextrin (beta-CD), heptakis-(2,6-di-O-methyl)-beta-cyclodextrin, and heptakis-(2,3,6-tri-O-methyl)-beta-cyclodextrin as chiral selectors. According to electrospray mass spectrometry, heptakis-(2,6-di-O-methyl)-beta-cyclodextrin was a mixture of six isomers. Reversal of the enantiomer migration order upon increasing the buffer pH from 2.5 to 3.5 was observed for all peptides with beta-cyclodextrin, for Ala-Tyr and Phe-Phe in the presence of heptakis-(2,3,6-tri-O-methyl)-beta-cyclodextrin, and for Ala-Tyr using heptakis-(2,6-di-O-methyl)-beta-cyclodextrin. The migration behavior could be explained on the basis of the complexation constants and the mobilities of the peptide-cyclodextrin complexes. Both, the binding constants and complex mobilities decreased with increasing pH as the overall-charge of the peptides decreased. While the complexation constants primarily determined the migration order at pH 2.5, complex mobility dominated in most cases at pH 3.5.     

Enantiomeric separation of gemfibrozil chiral analogues by capillary electrophoresis with heptakis(2,3,6-tri-O-methyl)-beta-cyclodextrin as chiral selector

The enantiomeric separation of gemfibrozil chiral analogues was performed by capillary zone electrophoresis (CZE). Resolution of the enantiomers was achieved using heptakis(2,3,6-tri-O-methyl)-beta-cyclodextrin (TM-beta-CD) as chiral selector dissolved into a buffer solution. In order to optimize the separation conditions, type, pH and concentration of running buffer and chiral selector concentration were varied. For each pH value, the optimum chiral selector concentration that produced the resolution of the isomers was found. The migration order of labile diastereoisomers formed was valued at the optimum experimental conditions by adding a pure optical isomer to the racemic mixture. Data from 1H NMR studies confirmed host-guest interaction between TM-beta-CD and 5-(2,5-dimethylphenoxy)-2-ethylpentanoic acid sodium salt. The hypothesized stoichiometry host:guest was 1:1. An apparent equilibrium constant (Ka) was estimated monitoring the chemical shift variation as a function of TM-beta-CD concentration. Salt effect on complexation equilibrium constant was also investigated.     

Light-induced charge separation and photocatalytic hydrogen evolution from water using Ru(II)Pt(II)-based molecular devices: effects of introducing additional donor and/or acceptor sites

In our hopes to improve the photocatalytic efficiency of photo-hydrogen-evolving molecular devices, several new dyads and triads possessing a photosensitizing Ru(bpy)(phen)(2)(2+) (or Ru(phen)(3)(2+)) chromophore (abbreviated as Ru(II)) attached to both/either a phenothiazine moiety (abbreviated as Phz) and/or H(2)-evolving PtCl(2)(bpy) units (abbreviated as Pt), such as Phz-Ru(II)-Pt2 (triad), Ru(II)-Pt2 (dyad), and Ru(II)-Pt3 (dyad), were synthesized and their basic properties together with the photo-hydrogen-evolving characteristics were investigated in detail. The (3)MLCT phosphorescence from the Ru(II) moiety in these systems is substantially quenched due to the highly efficient photoinduced electron transfer (PET). Based on the electrochemical studies, the driving forces for the PET were estimated as -0.07 eV for Phz-Ru(II)-Pt2, -0.24 eV for Ru(II)-Pt2, and -0.22 eV for Ru(II)-Pt3, revealing the exergonic character of the PET in these systems. Luminescence lifetime studies revealed the existence of more than two decay components, indicative of a contribution of multiple PET processes arising from the presence of at least two different conformers in solution. The major luminescence decay components of the hybrid systems [τ(1) = 6.5 ns (Ru(II)-Pt2) and τ(1) = 1.04 ns (Phz-Ru(II)-Pt2) in acetonitrile] are much shorter than those of Phz-free/Pt-free Ru(bpy)(phen)(2)(2+) derivatives. An important finding is that the triad Phz-Ru(II)-Pt2 affords a quite long-lived charge separated (CS) state (τ(CS) = 43 ns), denoted as Phz(+)˙-Ru(Red)-Pt2, as a result of reductive quenching of the triplet excited state of Ru(bpy)(phen)(2)(2+) by the tethering Phz moiety, where Ru(Red) denotes Ru(bpy)(phen)(2)(+). Moreover, the lifetime of Phz(+)˙-Ru(Red)-Pt2 was observed to be much longer than that of Phz(+)˙-Ru(Red). The photocatalytic H(2) evolution from water driven by these systems was examined in an aqueous acetate buffer solution (pH 5.0) containing 4-19% dimethylsulfoxide (solubilising reagent) in the presence of EDTA as a sacrificial electron donor. Dyads Ru(II)-Pt2 and Ru(II)-Pt3 were found to exhibit improved photo-hydrogen-evolving activity compared to the heterodinuclear Ru-Pt dyads developed so far in our group. On the other hand, almost no catalytic activity was observed for Phz-Ru(II)-Pt2 in spite of the formation of a strongly reducing Ru(Red) site (Phz(+)˙-Ru(Red)-Pt2), indicating that the electron transfer from the photogenerated Ru(Red) unit to the PtCl(2)(bpy) unit is not favoured presumably due to the slow electron transfer rate in the Marcus inverted region.     

Entrapment of [Ru(bpy)3]2+ in the anionic metal-organic framework: novel photoluminescence behavior exhibiting dual emission at room temperature

[Ru(bpy)(3)](2+) (bpy = 2,2'-bipyridine) ions were entrapped into the cavities of two-dimensional anionic sheet-like coordination polymeric networks of [M(dca)(3)](-) (dca = dicyanamide; M = Mn(II) and Fe(II)). The prepared compounds, {[Ru(bpy)(3)][Mn(dca)(3)](2)}(n) (1) and {[Ru(bpy)(3)][Fe(dca)(3)](2)}(n) (2), were structurally characterized by X-ray single crystal analysis. The spectroscopic properties of the [Ru(bpy)(3)](2+) ion dramatically changed on its entrapment in [M(dca)(3)](-). The [Ru(bpy)(3)](2+) moiety present in 1 and 2 exhibits novel dual photo-emission at room temperature.     

Ruthenium(II)-polyazine light absorbers bridged to reactive cis-dichlororhodium(III) centers in a bimetallic molecular architecture

Bimetallic complexes of the form [(bpy)(2)Ru(BL)RhCl(2)(phen)](PF(6))(3), where bpy = 2,2'-bipyridine, phen = 1,10-phenanthroline, and BL = 2,3-bis(2-pyridyl)pyrazine (dpp) or 2,2'-bipyrimidine (bpm), were synthesized, characterized, and compared to the [{(bpy)(2)Ru(BL)}(2)RhCl(2)](PF(6))(5) trimetallic analogues. The new complexes were synthesized via the building block method, exploiting the known coordination chemistry of Rh(III) polyazine complexes. In contrast to [{(bpy)(2)Ru(dpp)}(2)RhCl(2)](PF(6))(5) and [{(bpy)(2)Ru(bpm)}(2)RhCl(2)](PF(6))(5), [(bpy)(2)Ru(dpp)RhCl(2)(phen)](PF(6))(3) and [(bpy)(2)Ru(bpm)RhCl(2)(phen)](PF(6))(3) have a single visible light absorber subunit coupled to the cis-Rh(III)Cl(2) moiety, an unexplored molecular architecture. The electrochemistry of [(bpy)(2)Ru(dpp)RhCl(2)(phen)](PF(6))(3) showed a reversible oxidation at 1.61 V (vs Ag/AgCl) (Ru(III/II)), quasi-reversible reductions at -0.39 V, -0.74, and -0.98 V. The first two reductive couples corresponded to two electrons, consistent with Rh reduction. The electrochemistry of [(bpy)(2)Ru(bpm)RhCl(2)(phen)](PF(6))(3) exhibited a reversible oxidation at 1.76 V (Ru(III/II)). A reversible reduction at -0.14 V (bpm(0/-)), and quasi-reversible reductions at -0.77 and -0.91 V each corresponded to a one electron process, bpm(0/-), Rh(III/II), and Rh(II/I). The dpp bridged bimetallic and trimetallic display Ru(dpi)-->dpp(pi*) metal-to-ligand charge transfer (MLCT) transitions at 509 nm (14,700 M(-1) cm(-1)) and 518 nm (26,100 M(-1) cm(-1)), respectively. The bpm bridged bimetallic and trimetallic display Ru(dpi)-->bpm(pi*) charge transfer (CT) transitions at 581 nm (4,000 M(-1) cm(-1)) and 594 nm (9,900 M(-1) cm(-1)), respectively. The heteronuclear complexes [(bpy)(2)Ru(dpp)RhCl(2)(phen)](PF(6))(3) and [{(bpy)(2)Ru(dpp)}(2)RhCl(2)](PF(6))(5) had (3)MLCT emissions that are Ru(dpi)-->dpp(pi*) CT in nature but were red-shifted and lower intensity than [(bpy)(2)Ru(dpp)Ru(bpy)(2)](PF(6))(4). The lifetimes of the (3)MLCT state of [(bpy)(2)Ru(dpp)RhCl(2)(phen)](PF(6))(3) at room temperature (30 ns) was shorter than [(bpy)(2)Ru(dpp)Ru(bpy)(2)](PF(6))(4), consistent with favorable electron transfer to Rh(III) to generate a metal-to-metal charge-transfer ((3)MMCT) state. The reported synthetic methods provide means to a new molecular architecture coupling a single Ru light absorber to the Rh(III) center while retaining the interesting cis-Rh(III)Cl(2) moiety.     

Long-range electron transfer across molecule-nanocrystalline semiconductor interfaces using tripodal sensitizers

Four tripodal sensitizers, Ru(bpy)(2)(Ad-tripod-phen)(2+) (1), Ru(bpy)(2)(Ad-tripod-bpy)(2+) (2), Ru(bpy)(2)(C-tripod-phen)(2+) (3), and Ru(bpy)(2)(C-tripod-bpy)(2+) (4) (where bpy is 2,2'-bipyridine, phen is 1,10-phenanthroline, and Ad-tripod-bpy (phen) and C-tripod-bpy (phen) are tripod-shaped bpy (phen) ligands based on 1,3,5,7-tetraphenyladamantane and tetraphenylmethane, respectively), have been synthesized and characterized. The tripodal sensitizers consist of a rigid-rod arm linked to a Ru(II)-polypyridine complex at one end and three COOR groups on the other end that bind to metal oxide nanoparticle surfaces. The excited-state and redox properties of solvated and surface-bound 1-4 have been studied at room temperature. The absorption spectra, emission spectra, and electrochemical properties of 1-4 in acetonitrile solution are preserved when 1-4 are bound to nanocrystalline (anatase) TiO(2) or colloidal ZrO(2) mesoporous films. This behavior is indicative of weak electronic coupling between TiO(2) and the sensitizer. The kinetics for excited-state decay are exponential for 1-4 in solution and are nonexponential when 1-4 are bound to ZrO(2) or TiO(2). Efficient and rapid (k(cs) > 10(8) s(-)(1)) excited-state electron injection is observed for 1-4/TiO(2). The recombination of the injected electron with the oxidized Ru(III) center is well described by a second-order kinetic model with rate constants that are independent of the sensitizer. The sensitizers bound to TiO(2) were reversibly oxidized electrochemically with an apparent diffusion coefficient approximately 1 x 10(-11) cm(2) s(-)(1).     

Single-isomer sulfated alpha-cyclodextrins for capillary electrophoresis. Part 2. Hexakis(6-O-sulfo)-alpha-cyclodextrin: synthesis, analytical characterization, and initial screening tests

The second member of the family of single-isomer sulfated alpha-cyclodextrins, the sodium salt of hexakis(6-O-sulfo)-alpha-cyclodextrin (HxS), has been synthesized, analytically characterized, and used as the resolving agent for the capillary electrophoretic separation of the enantiomers of nonionic, weak-acid and weak-base analytes present in our initial screening kit. HxS interacted less strongly with many of the analytes tested than the larger-ring analogs, heptakis(6-O-sulfo)-beta-cyclodextrin (HS) and octakis(6-O-sulfo)-gamma-cyclodextrin (OS). For some of the analytes, the separation selectivities obtained with HxS were complementary to those observed with hexakis(2,3-di-O-acetyl-6-O-sulfo)-alpha-cyclodextrin (HxDAS), HS, and OS. For all analytes, the effective mobilities and separation selectivities as a function of the background electrolyte concentration of HxS followed the trends that were found for HxDAS, HS, and OS.     

Oxidative homolysis of a nitrosylchromium complex

Metal(III)-polypyridine complexes [M(NN)(3)](3+) (M = Ru or Fe; NN = bipyridine (bpy), phenanthroline (phen), or 4,7-dimethylphenanthroline (Me(2)-phen)) oxidize the nitrosylpentaaquachromium(III) ion, [Cr(aq)NO](2+), with an overall 4:1 stoichiometry, 4 [Ru(bpy)(3)](3+) + [Cr(aq)NO](2+) + 2 H(2)O --> 4 [Ru(bpy)(3)](2+) + [Cr(aq)](3+) + NO(3)(-) + 4 H(+). The kinetics follow a mixed second-order rate law, -d[[M(NN)(3)](3+)]/dt = nk[[M(NN)(3)](3+)][[Cr(aq)NO](2+)], in which k represents the rate constant for the initial one-electron transfer step, and n = 2-4 depending on reaction conditions and relative rates of the first and subsequent steps. With [Cr(aq)NO](2+) in excess, the values of nk are 283 M(-1) s(-1) ([Ru(bpy)(3)](3+)), 7.4 ([Ru(Me(2)-phen)(3)](3+)), and 5.8 ([Fe(phen)(3)](3+)). In the proposed mechanism, the one-electron oxidation of [Cr(aq)NO](2+) releases NO, which is further oxidized to nitrite, k = 1.04x10(6) M(-1) s(-1), 6.17x10(4), and 1.12x10(4) with the three respective oxidants. Further oxidation yields the observed nitrate. The kinetics of the first step show a strong correlation with thermodynamic driving force. Parallels were drawn with oxidative homolysis of a superoxochromium(III) ion, [Cr(aq)OO](2+), to gain insight into relative oxidizability of coordinated NO and O(2), and to address the question of the "oxidation state" of coordinated NO in [Cr(aq)NO](2+).     

Synthesis, characterization, and supramolecular properties of a hydrophilic porphyrin--beta-cyclodextrin conjugate

Reductive amination of 6-deoxy-6-formyl-beta-cyclodextrin with 5-(p-aminophenyl)-10,15,20-tris(p-sulfonatophenyl)porphyrin in the presence of an excess of sodium cyanoborohydride affords the hydrophilic cyclodextrin-porphyrin conjugate 3 in 23% yield. The structure of 3 was confirmed by NMR spectroscopy and mass spectrometry techniques. Compound 3 showed a marked tendency to dimerize in aqueous conditions via the formation of intermolecular porphyrin-cyclodextrin inclusion complexes and/or through electrostatic interactions. Information on the structure of these aggregates has been obtained by the use of circular dichroism and UV-vis spectroscopy. Aggregation can be avoided by the use of heptakis(2,3,6-tri-O-methyl)-beta-cyclodextrin (TM beta CD) that forms a 1:1 inclusion complex with compound 3.     

Chiral capillary electrophoresis: facts and fiction on the reproducibility of resolution with randomly substituted cyclodextrins

Comparative enantioseparation of the enantiomers of 1,1'-binaphthyl-2,2'-diyl hydrogen phosphate was performed with cyclodextrin (CD)-modified capillary electrophoresis (CE). Two single isomers, beta-CD, heptakis(2,3,6-tri-O-methyl)-beta-CD (TM-beta-CD), and heptakis(2,6-di-O-methyl)-beta-CD (DM-beta-CD) of 98% purity as well as heptakis(2,3-di-O-acetyl)-beta-CD were used and compared in terms of resolution power to randomly methylated and corresponding acetylated beta-CDs, which were synthesized in our laboratory. The methylated ones were characterized by means of matrix-assisted laser desorption/ionization-time of flight-(MALDI-TOF) mass spectrometry. By testing defined mixtures of single isomers and comparing their resolution power to randomly substituted CDs of similar degree of substitution we could show, that a simple characterization by the average molecular degree of substitution (DS) is not sufficient. In order to get reproducible results, a clearly defined substitution pattern is necessary, which is not given using randomly substituted CDs. Taken together, a validation of a chiral separation with "undefined" CD derivatives is almost impossible.