Physicochemical studies of green phosphorescent light-emitting materials from cyclometalated heteroleptic iridium(III) complexes

A series of novel imidazole ligands were synthesized and characterized. Phosphorescence studies of series of heteroleptic cyclometalated iridium(III) complexes reveal that these complexes possess dominantly (3)MLCT and (3)π-π* excited states and the solvent shifts of these complexes are interpreted by Richardt-Dimroth and Marcus solvent functions. The results consistent with prior assignments on the absorption band to a metal-to-ligand charge transfer excited state associated with chelating ligand. Emission kinetic studies exploited that the radiative transition (k(r)), increases with increasing λ(em) and linear correlation exists between ln(k(nr)) and energy gap. Electronic transition theory is applied to study the effect of E(g) and ΔQ(e) on non-radiative transition (k(nr)). With a larger ΔQ(e), favouring vibrational overlap and leading to a larger value for k(nr).     

Optical response of a cyclometalated iridium(III) hydrazino complex to carbon dioxide: generation of a strongly luminescent iridium(III) carbazate

A system pairing the luminescent core of [Ir(ppy)(2)L(2)](+) (ppy = 2-phenylpyridine) with simple hydrazino ancillary ligands (L = N(2)H(4)) has been prepared for the direct optical detection of carbon dioxide (CO(2)). Silver-assisted and silver-free techniques were used for the successful introduction of N(2)H(4) into the [Ir(ppy)(2)Cl](2) coordination sphere at room temperature to give the corresponding biscyclometalated iridium(III) hydrazino species as either a CF(3)SO(3)(-) (OTf(-), 2a) or Cl(-) (2b) salt. The silver-free route was accomplished by the direct replacement of the ligated Cl(-) using a slight excess of hydrazine. The luminescence profile of the cationic iridium(III) hydrazino complex 2a (λ(max) = 501 nm) undergoes a red shift (λ(max) = 524 nm), accompanied by a change in the peak shape during exposure to CO(2) in solution. The spectral changes observed are attributed to the formation of the corresponding neutral carbazate species Ir(ppy)(2)(H(2)NNHCOO) (3) and are not consistent with protonation of the ligated hydrazine. Conversion of the hydrazino species to the carbazate species is solvent-dependent and irreversible. The hydrazino and carbazate species have been structurally characterized by single-crystal X-ray diffraction; both compounds exhibit long-lived and intense room temperature luminescence in solution with τ = 1.56 and 1.80 μs and φ(em) = 0.42 and 0.45, respectively.     

Electrochemiluminescence of cyclometalated iridium (III) complexes

1. Download : Download high-res image (86KB)
2. Download : Download full-size image

     

Synthetically tailored excited states: phosphorescent, cyclometalated iridium(III) complexes and their applications

Phosphorescent iridium(III) complexes are being widely explored for their utility in diverse photophysical applications. The performance of these materials in such roles depends heavily on their excited-state properties, which can be tuned through ligand and substituent effects. This concept article focuses on methods for synthetically tailoring the properties of bis-cyclometalated iridium(III) materials, and explores the factors governing the nature of their lowest excited state.     

Highly efficient phosphorescent iridium (III) diazine complexes for OLEDs: Different photophysical property between iridium (III) pyrazine complex and iridium (III) pyrimidine complex

The synthesis and luminescence of four new iridium (III) diazine complexes (1-4) were investigated. HOMO and LUMO energy levels of the complexes were estimated according to the electrochemical performance and the UV-Vis absorption spectra, showing the pyrimidine complexes have a larger increase for the LUMO than the HOMO orbital in comparison with the pyrazine complexes. Several high-efficiency yellow and green OLEDs based on phosphorescent iridium (III) diazine complexes were obtained. The devices emitting yellow light based on 1 with turn-on voltage of 4.1 V exhibited an external quantum efficiency of 13.2% (power efficiency 20.3 lm/W), a maximum current efficiency of 37.3 cd/A. The electroluminescent performance for the green iridium pyrimidine complex of 3 is comparable to that of the iridium pyridine complex (PPY)₂Ir(acac) (PPY = 2-phenylpyridine), which is among the best reported.     

Acid-base-induced fac → mer isomerization of luminescent iridium(iii) complexes

Luminescent Ir(C^N)₃ complexes (C^N = cyclometalated arylpyridine ligand) exist in the form of two stable isomers with distinct photophysical and electrochemical properties: fac and mer. Herein, we show that fac-Ir(C^N)₃ complexes can be converted into the thermodynamically less stable mer forms by a consecutive reaction with first acid and then base. The chemically induced isomerization is fast, quantitative, and stereoselective, and it can be inversed by light. The new isomerization process opens the possibility to use highly luminescent Ir(C^N)₃ complexes as molecular switches.

From fac to mer and back: a clean, fast and simple procedure for the transformation of fac-Ir(C^N)₃ complexes into the thermodynamically less stable mer isomers is described. The process enables the interconversion of luminophores with distinct photophysical properties.     

Multisignaling detection of Hg2+ based on a phosphorescent iridium(III) complex

A multisignaling chemosensor for Hg(2+) based on the iridium(III) complex Ir(thq)(2)(acac) was realized through UV-Vis absorption, phosphorescent emission and electrochemical measurements. Upon addition of Hg(2+), an obvious blue-shift in absorption spectra and a strong decrease of emission intensity were measured for Ir(thq)(2)(acac), which could be observed by the naked eye. Hg(2+) is coordinated to Ir(thq)(2)(acac), forming a 1 : 1 complex. Because Hg(2+) is a thiophilic metal ion, the interaction between Hg(2+) and the sulfur atom of cyclometalated ligands is responsible for the significant variations in optical and electrochemical signals.     

Aggregation induced colour change for phosphorescent iridium(III) complex-based anionic surfactants

We describe a new class of water soluble metallosurfactant molecules based on luminescent neutral iridium(III) complexes. The compounds possess an alkyl chain terminated with a negatively charged group, a sulphate. Due to their amphiphilic nature they assemble in aggregates in water and their photophysical properties, as well as the morphological characterization of the assemblies are presented. In particular, UV-Vis absorption, steady-state and time-resolved emission spectroscopy, dynamic light scattering and scanning electron microscopy techniques have been employed towards the analysis of the assemblies in different media. Comparison with the single components shows that the aggregates have very different photophysical properties. Importantly, the change in colour upon self-assembly is a remarkable feature which could be used for the design of probes which can change properties in different environments.     

Proximity effects on the phosphorescent properties of dinuclear salicylaldiminato cyclometalated iridium(III) complexes linked with polymethylene spacers

Transition Metal Chemistry - The synthesis, structure and photophysical properties of dinuclear bis(phenylpyridine)(salicylaldiminato)Ir(III) complexes bearing polymethylene linkers are described...     

Synthesis of a highly phosphorescent emitting iridium(III) complex and its application in OLEDs

A rigid ligand benzo[de]benzo[4,5]imidazo[2,1-α]isoquinolin-7-one (biio) was designed and conveniently synthesized, and the corresponding bis-cyclometalated iridium complex (biio)₂Ir(acac) (acac = acetylacetone) was prepared. The light emitting and electrochemical properties of this complex were studied. The complex has the characters of simply synthetic procedure and strong phosphorescence. The electroluminescent device using this complex as dopant was fabricated. The device had the structure of ITO/NPB (40 nm)/Ir complex:CBP (7%, 30 nm)/BCP (15 nm)/Alq₃ (30 nm)/LiF (1 nm)/Al (100 nm). The maximum emission of the device was at 496 nm. The maximum brightness of the device can reach 79640 cd m⁻² with an external quantum efficiency of 12.1% and a maximum current efficiency of 31.7 cd A⁻¹.     

Efficient electrogenerated chemiluminescence from cyclometalated iridium(III) complexes

Very efficient electrogenerated chemiluminescence (ECL) phenomena were realized by deliberately tuning electron-transfer reactions from electrochemically generated electron donor to metal complex radical cations. By controlling the relative positions of HOMO and LUMO levels (oxidation potential and reduction potential) of Ir(III) complexes, we could obtain 77 times higher ECL from iridium(III) complexes in the presence of TPA than that of the Ru(bpy)32+/TPA system. This high ECL efficiency of new Ir(III) complexes can be used in many interesting applications such as sensors and luminescent devices.     

Phosphorescent iridium(III) complexes with nonconjugated cyclometalated ligands

A series of blue phosphorescent iridium(III) complexes 1-4 with nonconjugated N-benzylpyrazole ligands were synthesized and their structural, electrochemical, and photophysical properties were investigated. Complexes 1-4 exhibit phosphorescence with yields of 5-45 % in degassed CH2Cl2. Of the compounds, 1 showed emission that was nearly true blue at 460 nm with a lack of vibronic progression. These photophysical data clearly demonstrate that the methylene spacer of the cyclometalated N-benzylpyrazole chelate effectively interrupts the pi conjugation upon reacting with a third L X chelating chromophore. This gives a feasible synthesis for the blue phosphorescent complexes with a sufficiently large energy gap. In another approach, these complexes were investigated for their suitability for the host material in phosphorescent OLEDs. The device was synthesized by using 1 as the host for the green-emitting [Ir(ppy)3] dopant, which exhibits an external quantum conversion efficiency (EQE) of up to 11.4 % photons per electron (and 36.6 cdA(-1)), with 1931 Commission Internationale de L'Eclairage (CIE) coordinates of (0.30, 0.59), a peak power efficiency of 21.7 lmW(-1), and a maximum brightness of 32000 cdm(-2) at 14.5 V. At the practical brightness of 100 cdm(-2), the efficiency remains above 11 % and 18 lmW(-1), demonstrating its great potential as the host material for phosphorescent organic light-emitting diodes.     

An iridium(III) complex of oximated 2,2'-bipyridine as a sensitive phosphorescent sensor for hypochlorite

The designed synthesis of a sensitive phosphorescent chemosensor [Ir(ppy)(2)(L1)](PF(6)) (1) (Hppy = 2-phenylpyridine, L1 = 4'-methyl-2,2'-bipyridyl-4-carbaldehyde oxime) was carried out for selective detection of hypochlorite (ClO(-)). Complex 1 is weakly emissive in solution at ambient temperature due likely to rapid isomerization of C=N-OH as an effective non-radiative decay process. When 1 reacts with ClO(-), however, the emission is remarkably enhanced, in which the oxime in L1 is converted to a carboxylic acid in L2 (4'-methyl-2,2'-bipyridine-4-carboxylic acid). The produced complex [Ir(ppy)(2)(L2)](PF(6)) (2) exhibits bright orange-yellow luminescence originating from [5d(Ir) → π*(bpy)] (3)MLCT and [π(ppy) → π*(bpy)] (3)LLCT triplet excited states as suggested from the DFT computational studies. The selective and competitive experiments reveal that complex 1 shows high sensing selectivity and sensitivity for ClO(-) over other reactive oxygen species (ROS) and metal ions.     

Aggregation-induced phosphorescent emission (AIPE) of iridium(III) complexes

A novel aggregation-induced phosphorescent emission (AIPE) was observed for iridium(III) complexes. This interesting phenomenon was attributed to the intermolecular packing, resulting in a switch from the non-emissive 3LX excited state to the emissive 3MLLCT transition, which is confirmed by X-ray diffraction studies as well as theoretical calculations.     

Blue phosphorescence from mixed cyano-isocyanide cyclometalated iridium(III) complexes

The synthesis, structure, and photophysical and electrochemical properties of cyclometalated iridium complexes with ancillary cyano and isocyanide ligands are described. In the first synthetic step, cleavage of dichloro-bridged dimers [Ir(N=C)2(mu-Cl)]2 (N=C = 2-phenylpyridine, 2-(2-fluorophenyl)pyridine, and 2-(2,4-difluorophenyl)pyridine) by isocyanide ligands gave monomeric species of the types Ir(N=C)2(RNC)(Cl) (RNC = t-butyl isocyanide, 1,1,3,3-tetramethylbutyl isocyanide, 2-morpholinoethyl isocyanide, and 2,6-dimethylphenyl isocyanide). In turn, the chloride was replaced by cyanide giving Ir(N=C)2(RNC)(CN). The X-ray structures for two of the complexes show that the trans-pyridyl/cis-phenyl geometry of the parent dimer is preserved, with the ancillary ligands positioned trans to the cyclometalated phenyls. The cyano complexes all display strong blue photoluminescence in ambient, deoxygenated solutions with the first lambdamax ranging from 441 to 458 nm, quantum yields spanning 0.60 to 0.75, and luminescent lifetimes of 12.0-21.4 mus. A lack of solvatochromism and highly structured emission indicate that the lowest energy excited state is triplet ligand centered with some admixture of singlet metal-to-ligand charge-transfer character.     

Stable and tunable phosphorescent neutral cyclometalated Au(III) diaryl complexes

A series of novel luminescent cyclometalated Au(III) neutral complexes of the type cis-[(N(∧)C)AuL] [N(∧)C = 2-phenylpyridine (ppy), L = 1,1'-biphenyl (1)] and cis-[(N(∧)C)AuL(2)] [N(∧)C = 2-phenylpyridine (ppy), L = C(6)H(5) (2), C(6)F(5) (3), C(6)H(4)-CF(3)-p (4), 2-C(4)H(3)S (5)]; [N(∧)C = 2-(2-thienyl)pyridine (thpy), L = C(6)H(5) (6), C(6)F(5) (7)]; [N(∧)C = 2-(5-methyl-2-thienyl)pyridine (5 m-thpy), L = C(6)F(5) (8)] were successfully synthesized. The X-ray crystal structures of all compounds except 3 have been determined. These complexes were found to show long-lived emission in solution at room temperature. The emission origins of the complexes have been tentatively assigned to be derived from triplet states predominantly bearing intraligand (IL) character with some perturbation from the metal center. Density functional theory (DFT) calculations were performed to evaluate the stability associated with the complexes and TD-DFT calculations to ascertain the nature of the excited state. Variation of the cyclometalated ligands in the complexes readily leads to the tuning of the nature of the lower energy emissive states.     

pH-responsive aldehyde-bearing cyclometalated iridium(III) complex for tracking intracellular pH fluctuations under external stimulation

Intracellular pH undertakes critical functions in various biological and pathological processes. It is important to monitor intracellular pH fluctuations for understanding physiological and pathological processes. Here, one aldehyde-bearing cyclometalated iridium(III) complex ([(4-pba)₂Ir(dcphen)]PF₆, 4-pba = 4-(2-pyridyl) benzaldehyde, dcphen = 4,7-dichloro-1,10-phenanthroline, probe 1) was synthesized and used to track intracellular pH fluctuations. Probe 1 displayed pH-dependent luminescence property in pH range of 1.81–6.81 with an evaluated pK_a value of 4.30 in BR buffer-DMSO (v:v = 99:1). An intramolecular hydrogen bonds assisted pH-responsive mechanism was proposed for the pH-responsive behavior of probe 1. Probe 1 was successfully applied for imaging and tracking pH fluctuations in HeLa cells under external stimulation with fast response time, good photostability as well as low cytotoxicity and high cell permeability. This work demonstrates that aldehyde-bearing cyclometalated iridium(III) complex can be used as alternative pH-responsive probe for real-time tracking intracellular pH fluctuations, which provides a strategy for the design of pH-responsive probe in versatile applications.     

Synthesis and luminescence of a charge-neutral, cyclometalated iridium(III) complex containing N--C--N- and C--N--C-coordinating terdentate ligands

The first examples of iridium(III) complexes containing a terdentate, N--C--N-coordinated 1,3-di(2-pyridyl)benzene derivative, cyclometalated at C2 of the benzene ring, are reported. This mode of binding becomes significant only if competitive cyclometalation at C4/C6 is blocked, and the ligand 1,3-di(2-pyridyl)-4,6-dimethylbenzene (dpyxH) has been prepared to achieve this condition. The charge-neutral complex [Ir(dpyx)(dppy)], 2, (dppyH(2) = 2,6-diphenylpyridine) has been isolated, containing dpyx and dppy bound to the metal through one and two carbon atoms, respectively. A terpyridyl analogue, [Ir(dpyx)(ttpy)](PF(6))(2), 3, (ttpy = 4'-tolylterpyridine) has also been prepared and its X-ray crystal structure determined, confirming the N--C--N binding mode of dpyx. Complex 2 emits strongly in degassed solution at 295 K (lambda(max) = 585 nm, phi = 0.21, tau = 3900 ns, in CH(3)CN). In solution, the excited state can also undergo photodissociation, through cleavage of one of the Ir-C(dppy) bonds.