Investigation of the hydration of nonfouling material poly(sulfobetaine methacrylate) by low-field nuclear magnetic resonance

The strong surface hydration layer of nonfouling materials plays a key role in their resistance to nonspecific protein adsorption. Poly(sulfobetaine methacrylate) (polySBMA) is an effective material that can resist nonspecific protein adsorption and cell adhesion. About eight water molecules are tightly bound with one sulfobetaine (SB) unit, and additional water molecules over 8:1 ratio mainly swell the polySBMA matrix, which is obtained through the measurement of T(2) relaxation time by low-field nuclear magnetic resonance (LF-NMR). This result was also supported by the endothermic behavior of water/polySBMA mixtures measured by differential scanning calorimetry (DSC). Furthermore, by comparing both results of polySBMA and poly(ethylene glycol) (PEG), it is found that (1) the hydrated water molecules on the SB unit are more tightly bound than on the ethylene glycol (EG) unit before saturation, and (2) the additional water molecules after forming the hydration layer in polySBMA solutions show higher freedom than those in PEG. These results might illustrate the reason for higher resistance of zwitterionic materials to nonspecific protein adsorptions compared to that of PEGs.     

Evaluation of the stability of nonfouling ultrathin poly(ethylene glycol) films for silicon-based microdevices

The creation of nonfouling surfaces is one of the major prerequisites for microdevices for biomedical and analytical applications. Poly(ethylene glycol) (PEG), a water soluble, nontoxic, and nonimmunogenic polymer has the unique ability of reducing nonspecific protein adsorption and cell adhesion and, therefore, is generally coupled with a wide variety of surfaces to improve their biocompatibility. The performance of these modified surfaces for long-term biomedical applications largely depends on the stability of these PEG films. To this end, we have investigated the stability of covalently coupled ultrathin PEG films on silicon in aqueous in vivo like conditions for a period of 4 weeks. The PEG-modified silicon substrates were incubated in PBS (37 degrees C, pH 7.4, 5% CO2) for different periods of time and then characterized using the techniques of ellipsometry, contact angle measurement, X-ray photoelectron spectroscopy, and atomic force microscopy. The ability of the PEG-modified surfaces to control protein fouling was examined by protein adsorption studies using fluorescein isothiocyanate labeled bovine serum albumin and ellipsometry. Furthermore, the ability of these films to control fibroblast adhesion was examined. Studies suggest that the PEG-modified surfaces retain their protein and cell repulsive nature even though the PEG film thickness decreases for the period of investigation.     

Cross-linked magnetic nanoparticles from poly(ethylene glycol) and dodecyl grafted poly(succinimide) as magnetic resonance probes

Cross-linked magnetic nanoparticles were developed to improve the structural stability of amphiphilic polymer coated magnetic nanoparticles. These nanoparticles show strong potential for biomedical applications such as magnetic resonance imaging (MRI).     

Conformational analysis of poly(ethylene oxide) and model compounds by nuclear magnetic resonance spectroscopy

In order to determine the conformation of poly(ethylene oxide) (PEO), ¹³C satellite spectra of PEO, 1,2-dimethoxyethane (DME), and dioxane were measured at various temperatures in various solvents, and analyzed. Relations between the coupling constants were derived from the linearity between the parameters N = J_AB + J_A′B and L = J_A′B in AA′BB′ spectra of PEO and DME. The vicinal coupling constants for the individual rotational isomers were obtained from the above relations and the temperature dependences of N and L and the enthalpy differences were calculated in each solvent. The gauche rotamer is more stable than the trans isomer by 250–500 cal/mole in all cases examined.     

Direct nanopatterning of silsesquioxane/poly(ethylene glycol) blends with high stability and nonfouling properties

A free‐radical‐polymerizable SSQ/PEG blend with direct patternability has been proposed as an ideal nonfouling material for nanostructure‐based biomedical applications. Cured SSQ/PEG networks show an UV transparency of >90% at 365 nm, high resistance to organic/aqueous solutions, hydrophilicity and Young's moduli of 1.898–2.815 GPa. SSQ/PEG patterns with 25‐nm linewidths, 25‐nm spacing, and an aspect ratio of 4:1 were directly fabricated on transparent substrates by UV embossing, and cured SSQ/PEG networks with long‐term stability under chemical, thermal, and biological stress showed strong resistance to the nonspecific adsorption of biomolecules. These characteristics may offer a new strategy for the development of a number of medical nanodevice applications such as labs‐on‐a‐chip.

     

Surface modification of polyethersulfone membranes by blending triblock copolymers of methoxyl poly(ethylene glycol)-polyurethane-methoxyl poly(ethylene glycol)

The surface of polyethersulfone (PES) membrane was modified by blending triblock copolymers of methoxyl poly(ethylene glycol)-polyurethane-methoxyl poly(ethylene glycol) (mPEG-PU-mPEG), which were synthesized through solution polymerization with mPEG Mns of 500 and 2000, respectively. The PES and PES/mPEG-PU-mPEG blended membranes were prepared through spin coating coupled with liquid-liquid phase separation. FTIR and (1)H NMR analysis confirmed that the triblock copolymers were successfully synthesized. The functional groups and morphologies of the membranes were studied by ATR-FTIR and SEM, respectively. It was found that the triblock copolymers were blended into PES membranes successfully, and the morphologies of the blended membranes were somewhat different from PES membrane. The water contact angles and platelet adhesion were decreased after blending mPEG-PU-mPEG into PES membranes. Meanwhile, the activated partial thromboplastin time (APTT) for the blended membranes increased. The anti-protein-fouling property and permeation property of the blended membranes improved obviously. SEM observation and 3-(4, 5-Dimethylthiazol-2-yl)-2, 5-diphenyl tetrazolium bromide (MTT) assay proved the surfaces of the blended membranes promoted human hepatocytes adhesion and proliferation better than PES membrane.     

Segmented block copolymers of poly(ethylene glycol) and poly(ethylene terephthalate)

A new series of segmented copolymers were synthesized from poly(ethylene terephthalate) (PET) oligomers and poly(ethylene glycol) (PEG) by a two‐step solution polymerization reaction. PET oligomers were obtained by glycolysis depolymerization. Structural features were defined by infrared and nuclear magnetic resonance (NMR) spectroscopy. The copolymer composition was calculated via ¹H NMR spectroscopy. The content of soft PEG segments was higher than that of hard PET segments. A single glass‐transition temperature was detected for all the synthesized segmented copolymers. This observation was found to be independent of the initial PET‐to‐PEG molar ratio. The molar masses of the copolymers were determined by gel permeation chromatography (GPC). © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4448–4457, 2004     

Detecting pore size distribution of activated carbon by low-field nuclear magnetic resonance

In this study, the transverse relaxation time (T₂) of activated carbon (AC) in different relative environment humidity was detected firstly by low-field nuclear magnetic resonance (LFNMR). The pore size (diameter) of AC distributions was calculated by the relationship between T₂ and surface relaxation rate (ρ), where ρ was obtained by the detection of nine porous materials with known pore size. The results showed that the pore size distributions of AC calculated by ρ < 0.19 nm/ms were in good agreement with that obtained by nitrogen adsorption method and proved that LFNMR as a new detection method was feasible for characterizing AC pore size distribution.     

29Si nuclear magnetic resonance of poly(methylphenyl)silane

A Cl-terminated poly(methylphenyl)silane is synthesized and analyzed by ²⁹Si-NMR spectroscopy. Assignments are proposed for the different peaks observed. A modification of the chemical shifts of the peaks relative to the main chain atoms is observed upon heating. From these experimental results and computational calculations on model compounds, the assignments of the three main peaks to configurationally different Si atoms are confirmed. © 1996 John Wiley & Sons, Inc.     

Diffusion of ethylene glycol accompanied by reactions in poly(ethylene terephthalate) melts

Diffusion coefficients of ethylene glycol (EG) have been measured in poly(ethylene terephthlate) (PET) melts by a quartz-spring sorption apparatus. A simple mathematical model was developed to investigate the sorption behavior accompanied by chemical reactions of EG and PET at high temperatures. Diffusion coefficients are deduced from experimental data for an asymptotically thin sample in order to minimize the effects of reactions. The diffusion coefficient of EG is strongly dependent on the vapor pressure of EG and temperature but not on the molecular weight of PET in this experimental range (degree of polymerization 80–120). The diffusion coefficient of EG in PET melt at 265°C is 2.58 × 10^?7 cm²/s at the limit of zero concentration of EG. The activation energy for diffusion is 38.4 kcal/gmol, and the heat of solution for sorption is ?44.9 kcal/gmol. The concentrations of the volatile materials resulting from reactions in PET-EG system were analyzed with gas chromatography. In addition, a fit of the current model to experimental data yields frequency factors for the polymerization reaction (k₁) and the acetaldehyde formation reaction (k₂) to be 5.84 × 10⁸ cm³/mol ? min and 3.90 × 10¹¹ min^?1, respectively.     

Synthesis and characterization of poly(ethylene glycol) methyl ether endcapped poly(ethylene terephthalate)

Linear and branched poly(ethylene terephthalate) (PET) copolymers with polyethylene glycol) (PEG) methyl ether (700 or 2000 g/mol) end groups were synthesized using conventional melt polymerization. DSC analysis demonstrated that low levels of PEG end groups accelerated PET crystallization. The incorporated PEG end groups also decreased the crystallization temperature of PET dramatically, and copolymers with a high content of PEG (>17.6 wt%) were able to crystallize at room temperature. Rheological analysis demonstrated that the presence of PEG end groups effectively decreased the melt viscosities and facilitated melt processing. XPS and ATR-FTIR revealed that the PEG end groups tended to aggregate on the surface, and the surface of compression molded films containing 34.0 wt% PEG were PEG rich (85 wt% PEG). PEG end-capped PET (34.0 wt% PEG) and PET films were immersed into a fibrinogen solution (0.7 mg/mL BSA) for 72 h to investigate the propensity for protein adhesion. XPS demonstrated that the concentration of nitrogen (1.05%) on the surface of PEG endcapped PET film was statistically lower than PET (7.67%). SEM analysis was consistent with XPS results, and revealed the presence of adsorbed protein on the surface of PET films.     

Vibrational analysis of molten poly(ethylene glycol)

The infrared absorption of poly(ethylene glycol) was measured in the molten state. Characteristic bands of the molten state were identified. Normal vibrations and frequency distributions were treated for various conformation models with CH₂CH₂O repeat units. The infrared absorption peaks of the molten state closely correspond to the frequency distribution peaks of the TGT conformation with gauche O? CH₂? CH₂? O groups, although infrared bands due to trans O? CH₂? CH₂? O groups are also observed. Vibrational assignments of the infrared bands and Raman lines were made on the basis of potential energy distributions.     

Crystallization of photo-chain extended poly(ethylene glycol)

Coumarin-functionalized poly(ethylene glycol) (PEG) monols and diols were isothermally crystallized at temperatures between 20 and 35 °C before and after exposure to approximately 110 J cm⁻² of ultra-violet A (λ > 300 nm, UVA) irradiation. Irradiation dimerized the coumarin groups and chain-extended the coumarin-functionalized PEG oligomers. The higher molecular weights reduced the crystal growth rate by as much as 50% compared to the non-irradiated coumarin-functionalized PEG oligomers under ambient crystallization conditions. Hoffman’s kinetic nucleation theory was utilized to evaluate the types of nucleation that occurred for the coumarin-functionalized PEG diols (COU-PEG-COU). Crystallization regimes II and III were observed for the coumarin-modified PEG oligomers before and after exposure to UVA light.