Azacalix[6]arene hexamethyl ether: synthesis, structure, and selective uptake of carbon dioxide in the solid state

To investigate dynamic solid-state complexation hitherto unexplored in nitrogen-bridged calixarene analogues, azacalix[6]arene hexamethyl ether has been prepared in three steps by applying a 5+1 fragment-coupling approach by using a Buchwald- Hartwig aryl amination reaction with the aid of our previously devised temporal N-silylation protocol. X-ray crystallographic analysis and NMR spectroscopic measurements have revealed that the azacalix[6]arene is well endowed with hydrogen-bonding ability, by which both the molecular and crystal structures are controlled. The azacalix[6]arene is conformationally flexible in solution on the NMR time scale, whereas it adopts a definite 1,2,3-alternate conformation with S2 symmetry in the solid state as a result of intramolecular bifurcated hydrogen-bonding interactions. In the crystal, molecules of the azacalix[6]arene are mutually interacted by intermolecular hydrogen bonds to establish one-dimensional hexane-filled nanochannel crystal architecture. Although the single crystal was broken after desolvation, the resultant polycrystalline powder material was capable of selectively adsorbing CO2 among the four main gaseous components of the atmosphere. In contrast, carbocyclic p-tert-butylcalix[6]arene hexamethyl ether, the crystal structure of which was also elucidated for the first time in the present study, gave rise to almost no uptake of CO2. Additional solid-gas adsorption experiments for another three gases, such as N2, O2, and Ar, suggested that quadrupole/induced-dipole interactions and/or hydrogen-bonding interactions played an important role in permitting the observed selective uptake of CO2 by this new azacalix[6]arene in the solid state.     

Azacalix[7]arene heptamethyl ether: preparation, nanochannel crystal structure, and selective adsorption of carbon dioxide

To investigate the solid-state complexation of nitrogen-bridged calixarene analogues, azacalix[7]arene heptamethyl ether 1 has been prepared by applying a "5 + 2"-fragment coupling approach using Buchwald-Hartwig aryl amination reaction aided by our previously devised temporal N-silylation protocol. X-ray crystallographic analysis revealed that azacalix[7]arene 1 adopted a highly distorted 1,2-alternate conformation in the solid state as a result of intramolecular NH/O hydrogen bonding interactions and steric repulsion between the methoxy groups. In the crystal, molecules of 1 are mutually interacted by intermolecular NH/O and CH/pi interactions to establish one-dimensional (1D) hexane-filled nanochannel crystal architecture. Similarly to our recently reported azacalix[6]arene 2, the desolvated crystalline powder material of 1 was capable of selectively and rapidly adsorbing CO2 among the four main components of the atmosphere. The adsorption capacity of 1 for CO2 nearly doubled as compared to that of 2 because of the formation of the 1D nanochannel with almost twice the volume of the latter.     

Spontaneous and selective CO2 sorption under ambient conditions in seemingly nonporous molecular crystal of azacalix[5]arene pentamethyl ether

Described are the syntheses, crystal structures, and solid-gas adsorption behaviors of azacalix[4]arene tetramethyl ether and azacalix[5]arene pentamethyl ether. While the former compound exhibited no adsorption of four main atmospheric components, the latter selectively and rapidly adsorbed CO(2) at ambient temperature and pressure. X-ray crystallographic and potential energy distribution analysis revealed that azacalix[5]arene created an energetically favorable space for CO(2) in its seemingly nonporous crystal, leading to the observed selective CO(2) uptake under ambient conditions.     

Synthesis,structure, and conformation of terphenylene-derived azacalix[4]aromatics

Several novel azacalix[4]aromatics constituting terphenylene units have been synthesized via sequential nucleophilic aromatic substitution reactions of 5′-t-butyl-(1,1′:3′,1″-terphenyl)-3,3″-diamine 9 and 5′-t-butyl-(1,1′:3′,1″-terphenyl)– 4,4″-diamine 11 with 1,5-difluoro-2,4-dinitrobenzene and cyanuric chloride, respectively. The bridging –NH– functions of the tetra-nitro substituted azacalix[2]arene[2]terphenylenes 1 and 2 have been transformed to the corresponding –N(CH₃)– bridged azacalix[2]arene[2]terphenylenes 3 and 4 via N-alkylation. Single crystal X-ray analysis revealed that the terphenyl-3,3″-diamine derived azacalix[2]terphenylene[2]triazine 5 adopts a distorted chair conformation in the solid state, and the terphenyl-4,4″-diamine derived azacalix[2]terphenylene[2]triazine 6 was found to adopt a 1,3-alternate conformation.     

X-ray crystal structure of a p-hydroxycalix[6]arene derivative

The first molecular structure of a p-hydroxycalix[6]arene 6 has been determined by a single crystal X-ray diffraction study. The calix[6]arene molecule assumes a 1,2,3-alternate conformation with all OH groups at the upper rim engaged in H-bonds with pyridine molecules. The stacking of molecules of p-hydroxycalix[6]arene 6 along the a and c axes gives rise to a solvent pseudo-cylindrical cavity at the centre of the cell.     

Synthesis and structure of N-methylated azacalix[4]pyridines and azacalix[1]arene[3]pyridines

Reaction of azacalix[4]pyridine and azacalix[1]arene[3]pyridine with methyl iodide afforded N-methylated products selectively and highly efficiently. Crystal structures revealed that the modified electronic nature of the pyridines could change the conjugation between the bridging nitrogen and the neighbouring aromatics.     

Cyanocalix[4]arenes: synthesis,crystal structures and reactivity studies

Abstract

Herein, we describe an improved method to synthesise mono-, di- and tetra-cyanocalix[4]arene and report their crystal structure determinations. We also report our attempts to further functionalise the cyanocalix[4]arenes into dithiadiazolyl-calix[4]arenes, and propose a hypothesis as to why the cyano group on a calix[4]arene is an extremely challenging group to modify.     

杯芳烃的研究 I: 三乙酰氧基羟基杯[4]芳烃的合成及其与乙腈形成的包合物的晶体结构

本文报道了25,26,27-三乙酰氧基-28-羟基杯[4]芳烃的合成, 并通过^1H NMR,^1^2C NMR, IR以及元素分析对它进行了表征, 三乙酰氧基羟基杯[4]芳烃在乙腈中重结晶可得到1:1包合物的单晶, X射线结构分析确定它为单斜晶系, 其空间群为P21/n, 属分子间包合物, 在晶体中, 三乙酰氧基羟基杯[4]芳烃呈“内式"的部分锥形构象, 残留羟基处在分子中央, 被苯环和乙酰氧基所包围, 这种构象不利于对残留羟基的进攻。     

Synthesis,structures, and conformational characteristics of calixarene monoanions and dianions

The synthesis, complete characterization, and solid state structural and solution conformation determination of calix[n]arenes (n = 4, 6, 8) is reported. A complete series of X-ray structures of the alkali metal salts of calix[4]arene (HC4) illustrate the great influence of the alkali metal ion on the solid state structure of calixanions (e.g., the Li salt of monoanionic HC4 is a monomer; the Na salt of monoanionic HC4 forms a dimer; and the K, Rb, and Cs salts exist in polymeric forms). Solution NMR spectra of alkali metal salts of monoanionic calix[4]arenes indicate that they have the cone conformation in solution. Variable-temperature NMR spectra of salts HC4.M (M = Li, Na, K, Rb, Cs) show that they possess similar coalescence temperatures, all higher than that of HC4. Due to steric hindrance from tert-butyl groups in the para position of p-tert-butylcalix[4]arene (Bu(t)C4), the alkali metal salts of monoanionic Bu(t)C4 exist in monomeric or dimeric form in the solid state. Calix[6]arene (HC6) and p-tert-butylcalix[6]arene (Bu(t)C6) were treated with a 2:1 molar ratio of M(2)CO(3) (M = K, Rb, Cs) or a 1:1 molar ratio of MOC(CH(3))(3) (M = Li, Na) to give calix[6]arene monoanions, but calix[6]arenes react in a 1:1 molar ratio with M(2)CO(3) (M = K, Rb, Cs) to afford calix[6]arene dianions. Calix[8]arene (HC8) and p-tert-butylcalix[8]arene (Bu(t)()C8) have similar reactivity. The alkali metal salts of monoanionic calix[6]arenes are more conformationally flexible than the alkali metal salts of dianionic calix[6]arenes, which has been shown by their solution NMR spectra. X-ray crystal structures of HC6.Li and HC6.Cs indicate that the size of the alkali metal has some influence on the conformation of calixanions; for example, HC6.Li has a cone-like conformation, and HC6.Cs has a 1,2,3-alternate conformation. The calix[6]arene dianions show roughly the same structural architecture, and the salts tend to form polymeric chains. For most calixarene salts cation-pi arene interactions were observed.     

X-Ray Structure of an Inclusion Compound of 5,5'-Biscalix[4]arene-hexabenzoate with Toluene

The structure of the 1:3 complex between 5,5'-biscalix[4]arene-hexabenzoateand toluene has been determined by a single crystal X-ray diffraction study. Thetwo calix[4]arene subunits of the 5,5'-biscalix[4]arene system are related by aninversion center and are joined by an eclipsed biphenyl para-para linkage. Each calix[4]arene moiety displays a 1,3-alternate conformation and includes a toluene molecule within two opposite benzoate groups, while a third toluene molecule lies close to a crystallographic inversion center.     

Azacalix[4]arene tetramethyl ether with inherent chirality generated by substitution on the nitrogen bridges

The first inherently chiral azacalix[4]arene has been prepared by introducing three benzyl groups onto the nitrogen bridges. The highly enantioenriched compound was easily obtained via a moderately enantioselective cyclization followed by a simple crystallization procedure. NMR and X-ray crystallographic studies revealed that easy access to the enantiomer was permitted by the non-racemizable 1,3-alternate conformation in solution, up to 110 °C, as well as by the preferential crystallization of a racemic compound.     

Azacalix[4]arene cation radicals: spin-delocalised doublet- and triplet-ground states observed in the macrocyclic m-phenylene system connected with nitrogen atoms

Electron paramagnetic resonance spectroscopy has unmasked for the first time the spin-delocalised doublet- and triplet-ground states of azacalix[4]arene cation radicals.     

Aminolysis reaction of calix [ 4 ] arene esters and crystal structures and conformational behaviors of calix[4]arene amides

We first make use of aminolysis of calix[4]arene esters to synthesize calix[4]arene amides. When the two ethyl esters of the calix[4]arene esters are aminolysized, the 1, 3-amide derivative is formed selectively. The crystal structures of the calix-[4]arene with two butyl amide (3b) and four butyl amide moieties (4b) were determined. The intermolecular hydrogen bonds make 4b form two-dimensional net work insolid state. The 1H NMR spectra prove that 3b is of a pinched cone conformation, while 4b and tetraheptylamide-calix[4]arene (6b) take fast interconversion between two C2v isomers in solution and appear an apparent cone conformation at room temperature. As decreasing temperature, the interconversion rate decreases gradually and, finally, the interconversion process is frozen at Tc = -10℃, which makes both conformations of 4b and 6b the pinched cone structures. The hydrogen bond improves the interconversion barrier, and the large different values of the potential barrier between 6b and 4b (or 6b) may     

Facile, rapid, and high-yield synthesis of pillar[5]arene from commercially available reagents and its X-ray crystal structure

We monitored the progress of formation of dimethoxypillar[5]arene by size-exclusion chromatography. Surprisingly, the cyclization reaction completely finished in just 3 min. By improving the reaction conditions and purification process, we successfully obtained dimethoxypillar[5]arene in a short time and in high yield (71%) from commercially available reagents. By improving the deprotection reaction of the methoxy moieties, pillar[5]arene was isolated quantitatively. Single crystal X-ray analysis confirmed the structure of pillar[5]arene in the solid state.     

per-Hydroxylated pillar[6]arene: synthesis, X-ray crystal structure, and host-guest complexation

A per-hydroxylated pillar[6]arene was prepared. Single-crystal X-ray analysis demonstrated that its molecules are arranged in an up-to-down manner to form infinite channels in the solid state. Its host-guest complexation with a series of bispyridinium salts in solution was further investigated. It was found that the per-hydroxylated pillar[6]arene could form a 1:1 complex with paraquat in acetone with an association constant of 2.2 × 10(2) M(-1). This complex is a [2]pseudorotaxane as shown by its crystal structure, which is the first pillar[6]arene-based host-guest complex crystal structure.     

Hydrogen bonding receptors of tetraamide derivatives derived from thiacalix[4]arene in cone- and 1,3-alternate conformation

Novel ditopic receptors of tetraamide derivatives possessing four 2-pyridyl groups derived from thiacalix[4]arene in cone- and 1,3-alternate conformation were prepared. The structure of one of the tetraamide derivatives was confirmed by a single crystal X-ray analysis. The tetrathiacalix[4]arene tetraamides show strong intramolecular hydrogen bonding. The binding behaviour towards Ag⁺ and halides has been investigated by ¹H NMR titration experiments.     

Syntheses and conformations of tetrahomodioxacalix[4]arene tetraamides and tetrathioamides

A series of tetrahomodioxacalix[4]arene tetraamides and tetrathioamides with four p-phenyl groups on their upper rim were synthesized. From the (1)H and (13)C NMR and crystal structure, N-butylamido homooxacalix[4]arene (4) was found to be in the 1,3-alternate conformation and has intramolecular hydrogen bonding between N-H and facing oxygen atoms of the carbonyl O=C group. This hydrogen bonding decreased the metal ion complex ability. Transformation of the 1,3-alternate N-butylamido (4) into N-butylthioamido homooxacalix[4]arene (5) using Lawesson's reagent gave a conformational change to the C-1,2-alternate.     

Synthesis of tetraazacalix[2]arene[2]triazines: tuning the cavity by the substituents on the bridging nitrogen atoms

[Structure: see text] A number of tetraazacalix[2]arene[2]triazines bearing different substituents on the bridging nitrogen atoms were synthesized efficiently using a fragment coupling strategy. The N-arylation of the parent azacalix[2]arene]2]triazine afforded tetra(arylaza)calix[2]arene[2]triazine in 91% yield. The introduction of different substituents on the bridging positions led to the regulation of the cavity of the resulting macrocyclic molecules.     

Evidence for cation-π interactions in calixcrown·KPic complexes from X-ray crystal structure analysis and energy calculations

Abstract

The crystal and molecular structures of the 1,3-diisopropoxy-p-tertbutyl calix[4]arene crown-5 fixed in the partial cone conformation and that of its potassium picrate salt have been determined by single crystal X-ray diffraction studies. Energy calculations have been performed to gain more insight on the stabilizing cation…ligand interactions. The calculation of the total potential energy indicates that the contribution which comes from the electrostatic polarization induced by the electric field of the cation on the rotated nucleus gives a net stabilizing contribution of almost 6 kcal/mol. A comparison between the molecular geometry of some partial cone 1,3-disubstituted-p-tertbutylcalix[4]arene derivatives is reported and discussed in view of the preorganization principle.     

Imidazobenzimidazole fused azacalix[4]arenes: Synthesis,structure, and Zn2+-selective colorimetric-fluorometric sensor

Tetra(amino)azacalix[4]arene skeleton was functionalized at the bridging NH sites using various aromatic aldehydes via formation of imidazobenzimidazole fused heterocycles. X-ray single crystal analysis revealed distorted 1,3-alternate conformations for the resulting macrocycles. Anthracenyl and pyrenyl modified imidazobenzimidazole fused azacalix[4]arenes existed as dimers in the solid state, associated mainly through π-π stacking interactions between the planar polycyclic fluorophores. The tetrapyrenyl modified product was further used as a Zn²⁺-selective sensor, which showed naked-eye detected color change and enhanced excimer emission. The stoichiometry between the sensor and Zn²⁺ was determined to be 1:1 and the association constant was 1.1 × 10⁵ L/mol. The sensing process was highly selective and showed strong anti-interference with presence of other cations. The UV-vis spectral changes in the sensing process were completely reversible by alternate addition of Zn²⁺ and F⁻, showing an efficient ‘‘on–off-on’’ result.