Utilization of Immonium Product Ions for the Determination of Peptides with Intra-loops in Biological Matrices

Abstract

Triple quadrupole mass spectrometers are generally not considered a choice of instrument for determination of peptide molecules, for the reason that a collision cascade or a multiple fragmentation in the triple quadrupoles tends to decrease the sensitivity of peptide detection. Vasopressin, a peptide drug with an intra-chain disulfide bond, however, was found to generate a different fragmentation pattern. Its 20 member intra-loop went through an abrupt bond cleavage and structurally distinctive immonium ions produced in the secondary fragmentation were observed in abundance. With these immonium ions, an effective methodology for analyzing the peptides with intra-loops in biological matrices was developed in this report.     

Rapid sequencing and disulfide mapping of peptides containing disulfide bonds by using 1,5-diaminonaphthalene as a reductive matrix

MS/MS is indispensable for the amino acid sequencing of peptides. However, its use is limited for peptides containing disulfide bonds. We have applied the reducing properties of 1,5-diaminonaphthalene (1,5-DAN) as a MALDI matrix to amino acid sequencing and disulfide bond mapping of human urotensin II possessing one disulfide bond, and human guanylin possessing two disulfide bonds. 1,5-DAN was used in the same manner as the usual MALDI matrices without any pre-treatment of the peptide, and MS/MS was performed using a matrix-assisted laser desorption/ionization quadrupole ion trap time-of-flight mass spectrometer (MALDI QIT TOFMS). The results demonstrated that MS/MS of the molecular ions reduced by 1,5-DAN provided a series of significant b-/y-product ions. All 11 amino acid residues of urotensin II were identified using 1,5-DAN, while only 5 out of 11 residues were identified using 2,5-dihydroxybenzoic acid (DHB); similarly 11 out of 15 amino acid residues of guanylin were identified using 1,5-DAN, while only three were identified using DHB. In addition, comparison of the theoretical and measured values of the mass differences between corresponding MS/MS product ions using 1,5-DAN and DHB narrowed down the possible disulfide bond arrangement candidates. Consequently, 1,5-DAN as a reductive matrix facilitates rapid amino acid sequencing and disulfide mapping for peptides containing disulfide bonds.     

Site-specific detection of S-nitrosylated PKB alpha/Akt1 from rat soleus muscle using CapLC-Q-TOF(micro) mass spectrometry

Protein Kinase Balpha(PKBalpha, or Akt1) is believed to play a crucial role in programmed cell death, cancer progression and the insulin-signaling cascade. The protein is activated by phosphorylation at multiple sites and subsequently phosphorylates and activates eNOS. Free cysteine residues of the protein may capture reactive, endogenously produced nitric oxide (NO) as S-nitrosothiols. Site-specific detection of S-nitrosylated cysteine residues, usually at low stoichiometry, has been a major challenge in proteomic research largely due to the lack of mass marker for S-nitrosothiols that are very labile under physiologic conditions. In this report we describe a sensitive and specific MS method for detection of S-nitrosothiols in PKB alpha/Akt1 in rat soleus muscle. PKB alpha/Akt1 was isolated by immunoprecipitation and 2D-gel electrophoresis, subjected to in-gel tryptic digestion, and cysteinyl nitrosothiols were reacted with iodoacetic acids [2-C(12)/C(13) = 50/50] under ascorbate reduction conditions. This resulted in the production of relatively stable carboxymethylcysteine (CMC) immonium ions (m/z 134.019 and m/z 135.019) within a narrow argon collision energy (CE = 30 +/- 5 V) in the high MS noise region. In addition, free and disulfide-linked cysteine residues were converted to carboxyamidomethylcysteines (CAM). Tryptic S-nitrosylated parent ion was detected with a mass accuracy of 50 mDa for the two CMC immonium ions at the triggered elution time during capillary liquid chromatography (LC) separation. A peptide containing Cys(296) was discriminated from four co-eluting tryptic peptides under lock mass conditions (m/z 785.8426). S-nitrosothiol in the tryptic peptide, ITDFGLBKEGIK (B: CAM, [M + 2H](2+) = 690.86, Found: 690.83), is believed to be present at a very low level, since the threshold for the CMC immonium trigger ions was set at 3 counts/s in the MS survey. The high levels of NO that are produced under stress conditions may result in increased S-nitrosylation of Cys(296) which blocks disulfide bond formation between Cys(296) and Cys(310) and suppresses the biological effects of PKB alpha/Akt1. With the procedures developed here, this process can be studied under physiological and pathological conditions.     

Fragmentation of intra-peptide and inter-peptide disulfide bonds of proteolytic peptides by nanoESI collision-induced dissociation

Characterisation and identification of disulfide bridges is an important aspect of structural elucidation of proteins. Covalent cysteine-cysteine contacts within the protein give rise to stabilisation of the native tertiary structure of the molecules. Bottom-up identification and sequencing of proteins by mass spectrometry most frequently involves reductive cleavage and alkylation of disulfide links followed by enzymatic digestion. However, when using this approach, information on cysteine-cysteine contacts within the protein is lost. Mass spectrometric characterisation of peptides containing intra-chain disulfides is a challenging analytical task, because peptide bonds within the disulfide loop are believed to be resistant to fragmentation. In this contribution we show recent results on the fragmentation of intra and inter-peptide disulfide bonds of proteolytic peptides by nano electrospray ionisation collision-induced dissociation (nanoESI CID). Disulfide bridge-containing peptides obtained from proteolytic digests were submitted to low-energy nanoESI CID using a quadrupole time-of-flight (Q-TOF) instrument as a mass analyser. Fragmentation of the gaseous peptide ions gave rise to a set of b and y-type fragment ions which enabled derivation of the sequence of the amino acids located outside the disulfide loop. Surprisingly, careful examination of the fragment-ion spectra of peptide ions comprising an intramolecular disulfide bridge revealed the presence of low-abundance fragment ions formed by the cleavage of peptide bonds within the disulfide loop. These fragmentations are preceded by proton-induced asymmetric cleavage of the disulfide bridge giving rise to a modified cysteine containing a disulfohydryl substituent and a dehydroalanine residue on the C-S cleavage site.     

Disulfide bond cleavages observed in SORI-CID of three nonapeptides complexed with divalent transition-metal cations

Tandem MS sequencing of peptides that contain a disulfide bond is often hampered when using a slow heating technique. We show that complexation of a transition-metal ion with a disulfide-bridge-containing nonapeptide yields very rich tandem mass spectra, including fragments that involve the cleavage of the disulfide bond up to 56% of the total product ion intensity. On the contrary, MS/MS of the corresponding protonated nonapeptides results predominantly in fragments from the region that is not involved in the disulfide bond. Eleven different combinations of three nonapeptides and three metal ions were measured using Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS) combined with sustained off-resonance irradiation collision induced dissociation (SORI-CID). All observed fragments are discussed with respect to four different types of product ions: neutral losses, b/y-fragmentation with and without the disulfide bond cleavage, and losses of internal amino acids without rupture of the disulfide bridge. Furthermore, it is shown that the observed complementary fragment pairs obtained from peptide-metal complexes can be used to determine the region of the binding site of the metal ion. This approach offers an efficient way to cleave disulfide-bridged structures using low energy MS/MS, which leads to increased sequence coverage and more confidence in peptide or protein assignments.     

Collision Induced Dissociation Products of Disulfide-Bonded Peptides: Ions Result from the Cleavage of More Than One Bond

Disulfide bonds are a post-translational modification (PTM) that can be scrambled or shuffled to non-native bonds during recombinant expression, sample handling, or sample purification. Currently, mapping of disulfide bonds is not easy because of various sample requirements and data analysis difficulties. One step towards facilitating this difficult work is developing a better understanding of how disulfide-bonded peptides fragment during collision induced dissociation (CID). Most automated analysis algorithms function based on the assumption that the preponderance of product ions observed during the dissociation of disulfide-bonded peptides result from the cleavage of just one peptide bond, and in this report we tested that assumption by extensively analyzing the product ions generated when several disulfide-bonded peptides are subjected to CID on a quadrupole time of flight (QTOF) instrument. We found that one of the most common types of product ions generated resulted from two peptide bond cleavages, or a double cleavage. We found that for several of the disulfide-bonded peptides analyzed, the number of double cleavage product ions outnumbered those of single cleavages. The influence of charge state and precursor ion size was investigated, to determine if those parameters dictated the amount of double cleavage product ions formed. It was found in this sample set that no strong correlation existed between the charge state or peptide size and the portion of product ions assigned as double cleavages. These data show that these ions could account for many of the product ions detected in CID data of disulfide bonded peptides. We also showed the utility of double cleavage product ions on a peptide with multiple cysteines present. Double cleavage products were able to fully characterize the bonding pattern of each cysteine where typical single b/y cleavage products could not.     

ESI‐MS/MS analysis of protonated N‐methyl amino acids and their immonium ions

Methylation is one of the important posttranslational modifications of biological systems. At the metabolite level, the methylation process is expected to convert bioactive compounds such as amino acids, fatty acids, lipids, sugars, and other organic acids into their methylated forms. A few of the methylated amino acids are identified and have been proved as potential biomarkers for several metabolic disorders by using mass spectrometry–based metabolomics workstation. As it is possible to encounter all the N‐methyl forms of the proteinogenic amino acids in plant/biological systems, it is essential to have analytical data of all N‐methyl amino acids for their detection and identification. In earlier studies, we have reported the ESI‐MS/MS data of all methylated proteinogenic amino acids, except that of mono‐N‐methyl amino acids. In this study, the N‐methyl amino acids of all the amino acids ( 1 ‐ 21 ; including one isomeric pair) were synthesized and characterized by ESI‐MS/MS, LC/MS/MS, and HRMS. These data could be useful for detection and identification of N‐methyl amino acids in biological systems for future metabolomics studies. The MS/MS spectra of [M + H]⁺ ions of most N‐methyl amino acids showed respective immonium ions by the loss of (H₂O, CO). The other most common product ions detected were [MH‐(NH₂CH₃]⁺, [MH‐(RH)]⁺ (where R = side chain group) ions, and the selective structure indicative product ions due to side chain and N‐methyl group. The isomeric/isobaric N‐methyl amino acids could easily be differentiated by their distinct MS/MS spectra. Further, the MS/MS of immonium ions inferred side chain structure and methyl group on α‐nitrogen of the N‐methyl amino acids.     

Strategies for locating disulfide bonds in a monoclonal antibody via mass spectrometry

The location of the disulfide bonds in a recombinant monoclonal antibody was confirmed by matrix-assisted laser desorption/ionization-time-of-flight (MALDI-TOF) and electrospray ionization (ESI) mass spectrometry (MS). A non-reduced Endoproteinase Lys-C (Endo Lys-C) digest of the antibody was analyzed directly by MALDI-TOFMS. The sample was then reduced on-plate by depositing dithiothreitol (DTT) on the sample spot and re-analyzed by MALDI-TOFMS. The disulfide bonds were assigned based on the disappearance of certain mass ions in the non-reduced digest and the appearance of product ions in the reduced digest. A rapid LC/ESI-MS protocol was also developed to determine the location of the disulfide bonds. The peptides generated from the Endo Lys-C digest of the antibody were partially separated on a high performance liquid chromatography (HPLC) column by utilizing a steep gradient and analyzed by ESI-MS. The masses of the partially resolved peptides were determined by deconvoluting the mass spectra.     

Simple and sensitive quantification of bioactive peptides in biological matrices using liquid chromatography/selected reaction monitoring mass spectrometry coupled with trichloroacetic acid clean-up

A simple and sensitive liquid chromatography/electrospray ionization tandem mass spectrometric (LC/ESI-MS/MS) method has been developed for the quantification of bioactive peptides in biological fluids. The method employs protein precipitation with 4% trichloroacetic acid (TCA) and selected reaction monitoring (SRM) using an immonium ion as the product ion. This method was applied to determine the synthetic parathyroid hormone (PTH) analog (MW 1721) in rat plasma and human hepcidin-25 (MW 2789) in human serum. TCA clean-up showed a sufficient recovery for peptides with a MW of less than 3000, and would be useful as a simple and rapid method because of direct injection of the supernatant without evaporation or dilution. In addition, TCA clean-up allowed us not only to reduce sample preparation time, but also to select an immonium ion as a product ion of SRM, which led to detection more sensitive than SRM using other types of product ions. The lower limits of quantitation (LLOQs) of the PTH analog and the human hepcidin-25 were 0.2 ng/mL and 5 ng/mL, respectively. This method was fully validated with acceptable linearity, intra- and inter-assay precisions, and accuracy. Furthermore, this simple and rapid method is applicable to pharmacokinetic studies.     

Formation of diagnostic product ions from cyanobacterial cyclic peptides by the two-bond fission mechanism using ion trap liquid chromatography/multi-stage mass spectrometry

Product ions obtained by tandem mass spectrometry (MS/MS) are quite effective for the amino acid sequencing of linear peptides. However, in the case of cyclic peptides, the fragmentation pattern is complicated because the cleavages occur randomly and product ions are generated as a(n), b(n), c(n), x(n), y(n) and z(n) series ions; therefore, the authors have never obtained sufficient sequence information. In order to overcome this problem, we applied ion trap liquid chromatography/multi-stage mass spectrometry (LC/MS(n)) and characterized the product ions obtained from anabaenopeptins and aeruginopeptins as the cyclic peptides. For the anabaenopeptins, MS(2) analysis did not provide sufficient sequence information on the cyclic structure, and MS(3) analysis was applied to sequence the constituent amino acids. Diagnostic product ions were obtained by the MS(3) analysis and were quite effective for obtaining the sequence information of the constituent amino acids. MS(2) analysis was, however, sufficient to obtain the sequence information of the aeruginopeptins. In both cases, the resulting product ions obtained from the cyclic structures were formed by the two-bond fission mechanism of the precursor ion, in which an initial fission of the cyclic structure to a linear one and subsequent fission(s) at the peptide bonds are included. The fragmentations were similar for the structurally related compounds, indicating that the cleavages occurred at definite peptide bonds. In addition, the resulting product ions are generated as b(n) series ions and the mass difference facilitates the amino acid sequencing. Thus, ion trap LC/MS(n) provides sequence information, and the resulting product ions are reproducible among the structurally related compounds and reliable for the sequencing of the constituent amino acids of the cyclic structure.     

Energetic switch of the proline effect in collision‐induced dissociation of singly and doubly protonated peptide Ala‐Ala‐Arg‐Pro‐Ala‐Ala

Suppression of the selective cleavage at N‐terminal of proline is observed in the peptide cleavage by proteolytic enzyme trypsin and in the fragment ion mass spectra of peptides containing Arg‐Pro sequence. An insight into the fragmentation mechanism of the influence of arginine residue on the proline effect can help in prediction of mass spectra and in protein structure analysis. In this work, collision‐induced dissociation spectra of singly and doubly charged peptide AARPAA were studied by ESI MS/MS and theoretical calculation methods. The proline effect was evaluated by comparing the experimental ratio of fragments originated from cleavage of different amide bonds. The results revealed that the backbone amide bond cleavage was selected by the energy barrier height of the fragmentation pathway although the strong proton affinity of the Arg side chain affected the stereostructure of the peptide and the dissociation mechanism. The thermodynamic stability of the fragment ions played a secondary role in the abundance ratio of fragments generated via different pathways. Fragmentation studies of protonated peptide AACitPAA supported the energy‐dependent hypothesis. The results provide an explanation to the long‐term arguments between the steric conflict and the proton mobility mechanisms of proline effect.     

Hyphenated mass spectrometric techniques-indispensable tools in clinical and forensic toxicology and in doping control

Hyphenated mass spectrometric techniques, particularly gas chromatography/mass spectrometry (GC/MS) and liquid chromatography/mass spectrometry (LC/MS), are indispensable tools in clinical and forensic toxicology and in doping control owing to their high sensitivity and specificity. They are used for screening, library-assisted identification and quantification of drugs, poisons and their metabolites, prerequisites for competent expertise in these fields. In addition, they allow the study of metabolism of new drugs or poisons as a basis for developing screening procedures in biological matrices, most notably in urine, or toxicological risk assessment. Concepts and procedures using GC/MS and LC/MS techniques in the areas of analytical toxicology and the role of mass spectral libraries are presented and discussed in this feature article. Finally, perspectives of their future position are discussed.     

Investigation of some biologically relevant redox reactions using electrochemical mass spectrometry interfaced by desorption electrospray ionization

Recently we have shown that, as a versatile ionization technique, desorption electrospray ionization (DESI) can serve as a useful interface to combine electrochemistry (EC) with mass spectrometry (MS). In this study, the EC/DESI-MS method has been further applied to investigate some aqueous phase redox reactions of biological significance, including the reduction of peptide disulfide bonds and nitroaromatics as well as the oxidation of phenothiazines. It was found that knotted/enclosed disulfide bonds in the peptides apamin and endothelin could be electrochemically cleaved. Subsequent tandem MS analysis of the resulting reduced peptide ions using collision-induced dissociation (CID) and electron-capture dissociation (ECD) gave rise to extensive fragment ions, providing a fast protocol for sequencing peptides with complicated disulfide bond linkages. Flunitrazepam and clonazepam, a class of nitroaromatic drugs, are known to undergo reduction into amines which was proposed to involve nitroso and N-hydroxyl intermediates. Now in this study, these corresponding intermediate ions were successfully intercepted and their structures were confirmed by CID. This provides mass spectrometric evidence for the mechanism of the nitro to amine conversion process during nitroreduction, an important redox reaction involved in carcinogenesis. In addition, the well-known oxidation reaction of chlorpromazine was also examined. The putative transient one-electron transfer product, the chlorpromazine radical cation (m/z 318), was captured by MS, for the first time, and its structure was also verified by CID. In addition to these observations, some features of the DESI-interfaced electrochemical mass spectrometry were discussed, such as simple instrumentation and the lack of background signal. These results further demonstrate the feasibility of EC/DESI-MS for the study of the biology-relevant redox chemistry and would find applications in proteomics and drug development research.     

化学裂解结合生物质谱对多肽二硫键的定位

二硫键是一种与多肽及蛋白质结构和功能密切相关的化学键. 当多肽中存在多个半胱氨酸时, 形成的二硫键可能会存在多种配对方式. 快速且精准地定位多肽中多对二硫键对研究多肽的结构与功能间的关系十分重要. 本文开发了一种基于化学裂解和生物质谱的新方法, 对利那洛肽中3对二硫键进行了精准定位. 通过解析裂解后特异肽段的二级质谱图, 确定利那洛肽中3对二硫键的配对方式分别为Cys1-Cys6, Cys2-Cys10和Cys5-Cys13. 该方法为二硫键的定位研究提供了新思路.     

Use of an integrated MS--multiplexed MS/MS data acquisition strategy for high-coverage peptide mapping studies

Liquid chromatography/mass spectrometry (LC/MS) peptide maps have become a basic tool for characterizing proteins of biological and pharmaceutical interest. The ability to generate reproducible maps with high protein sequence coverage is a central goal of methods development. We have applied a recently developed analytical approach (termed LC/MS(E)) to LC/MS peptide mapping. Using the LC/MS(E) approach, the mass detector alternates between a low-energy scanning mode (MS) for accurate mass peptide precursor identification, and an elevated-energy mode (MS(E)) for generation of accurate mass multiplex peptide fragmentation data. In this paper, we evaluate this analytical approach against a tryptic digest of yeast enolase. From the low-energy data, high peptide map coverage (98% of sequence from peptides >3 amino acids) was reproducibly obtained. The MS signal for essentially equimolar peptides varied over 2 orders of magnitude in intensity, and peptide intensities could be precisely and reproducibly measured. Using the temporal constraint that MS(E) peptide fragment ions exhibit chromatographic profiles that parallel the precursor ions that generated them, we were able to produce accurate mass time-resolved MS/MS information for all enolase peptides with sufficient abundance to produce a detectable fragment ion.     

Application of MALDI TOF/TOF mass spectrometry and collision-induced dissociation for the identification of disulfide-bonded peptides

This paper describes a method for the fast identification and composition of disulfide-bonded peptides. A unique fragmentation signature of inter-disulfide-bonded peptides is detected using matrix-assisted laser desorption/ionization (MALDI) time-of-flight (TOF)/TOF mass spectrometry and high-energy collision-induced dissociation (CID). This fragmentation pattern identifies peptides with an interconnected disulfide bond and provides information regarding the composition of the peptides involved in the pairing. The distinctive signature produced using CID is a triplet of ions resulting from the cleavage of the disulfide bond to produce dehydroalanine, cysteine or thiocysteine product ions. This method is not applicable to intra-peptide disulfide bonds, as the cleavage mechanism is not the same and a triplet pattern is not observed. This method has been successfully applied to identifying disulfide-bonded peptides in a number of control digestions, as well as study samples where disulfide bond networks were postulated and/or unknown.     

Characterizing closely spaced, complex disulfide bond patterns in peptides and proteins by liquid chromatography/electrospray ionization tandem mass spectrometry

Identifying the Cys residues involved in disulfide linkages of peptides and proteins that contain complex disulfide bond patterns is a significant analytical challenge. This is especially true when the Cys residues involved in the disulfide bonds are closely spaced in the primary sequence. Peptides and proteins that contain free Cys residues located near disulfide bonds present the additional problem of disulfide shuffling via the thiol-disulfide exchange reaction. In this paper, we report a convenient method to identify complex disulfide patterns in peptides and proteins using liquid chromatography/electrospray ionization tandem mass spectrometry (LC/ESI-MS/MS) in combination with partial reduction by tris(2-carboxyethyl)phosphine (TCEP). The method was validated using well-characterized peptides and proteins including endothelin, insulin, alpha-conotoxin SI and immunoglobulin G (IgG2a, mouse). Peptide or protein digests were treated with TCEP in the presence of an alkylation reagent, maleimide-biotin (M-biotin) or N-ethylmaleimide (NEM), followed by complete reduction with dithiothreitol and alkylation by iodoacetamide (IAM). Subsequently, peptides that contained alkylated Cys were analyzed by capillary LC/ESI-MS/MS to determine which Cys residues were modified with M-biotin/NEM or IAM. The presence of the alkylating reagent (M-biotin or NEM) during TCEP reduction was found to minimize the occurrence of the thiol-disulfide exchange reaction. A critical feature of the method is the stepwise reduction of the disulfide bonds and the orderly, sequential use of specific alkylating reagents.     

Rapid mass spectral identification of contryphans. Detection of characteristic peptide ions by fragmentation of intact disulfide-bonded peptides in crude venom

The mass spectrometric cleavage of intact disulfide-bonded peptides in conus venom has been investigated. Contryphans containing a single disulfide bond are shown to fragment preferentially at X-Pro bonds, giving rise to linearized, unsymmetrical cystine peptides, which subsequently fragment by multiple pathways at the disulfide bridge. Cleavage at the disulfide bond can be initiated by initial loss of the CalphaH or CbetaH proton, resulting in distinct product ions, with the subsequent loss of elemental sulfur, H2S or H2S2. Contryphans from Conus amadis, Conus loroisii, and Conus striatus are presented as examples, in which detailed assignment of the product ions resulting from tandem mass spectrometric analysis of the intact disulfide is also accomplished. Characteristic fragments arising from conserved contryphan sequences can be used as diagnostic, permitting rapid identification of this class of peptides in crude venom. The observed fragment ions obtained for contryphans in diverse cone snail species are also compared.     

The effect of histidine oxidation on the dissociation patterns of peptide ions

Oxidative modifications to amino acid side chains can change the dissociation pathways of peptide ions, although these variations are most commonly observed when cysteine and methionine residues are oxidized. In this work we describe the very noticeable effect that oxidation of histidine residues can have on the dissociation patterns of peptide ions containing this residue. A common product ion spectral feature of doubly charged tryptic peptides is enhanced cleavage at the C-terminal side of histidine residues. This preferential cleavage arises as a result of the unique acid/base character of the imidazole side chain that initiates cleavage of a proximal peptide bond for ions in which the number of protons does not exceed the number of basic residues. We demonstrate here that this enhanced cleavage is eliminated when histidine is oxidized to 2-oxo-histidine because the proton affinity and nucleophilicity of the imidazole side chain are lowered. Furthermore, we find that oxidation of histidine to 2-oxo-histidine can cause the misassignment of oxidized residues when more than one oxidized isomer is simultaneously subjected to tandem mass spectrometry (MS/MS). These spectral misinterpretations can usually be avoided by using multiple stages of MS/MS (MS(n)) or by specially optimized liquid chromatographic separation conditions. When these approaches are not accessible or do not work, N-terminal derivatization with sulfobenzoic acid avoids the problem of mistakenly assigning oxidized residues.     

Liquid chromatography/tandem mass spectrometry based targeted proteomics quantification of P-glycoprotein in various biological samples

P-Glycoprotein (P-gp/ABCB1) is expressed in membrane barriers to exclude pharmacological substrates from cells, and therefore influences the ADME/Tox properties and efficacy of therapeutics. In the present study, a liquid chromatography/tandem mass spectrometry (LC/MS/MS)-mediated targeted proteomics was developed to quantitate P-gp protein. With the aid of in silico predictive tools, a unique 9-mer tryptic peptide of P-gp protein was synthesized (with the stable isotope labeled (SIL) peptide as internal standard) and applied for quantitative LC/MS/MS method development. For LC/MS/MS quantification, the N-glycosylation of the peptide, polymorphism and transmembrane region was intended to be excluded during the peptide selection. The lower limit of quantification was established to be 0.025 nM with the linearity of the standard curve ranging to 20 nM of P-gp signature peptides in the matrix digested surrogate bovine serum albumin. The digestion efficiency, both the accuracy (relative error) and the precision (coefficient of variation) of the method, was verified by using the synthetic quantification peptide and the synthetic surrogate substrate peptide that mimics the sequence of tryptic peptide and associated flanking tryptic cleavage sites at the N- and C-terminals. By applying the method developed, the absolute amounts of human, dog and mouse P-gp (Mdr1a) were quantified in various biological samples. LC/MS/MS-mediated P-gp quantification was achieved as a highly sensitive, selective and reproducible assay and could be directly applicable to many current research needs related to P-gp.