Dynamic properties of microemulsions modified with homopolymers and diblock copolymers: the determination of bending moduli and renormalization effects

The properties of bicontinuous microemulsions, consisting of water, oil, and a surfactant, can be modified by the addition of diblock copolymers (boosting effect) and homopolymers (inverse boosting effect) or a combination of both. Here, the influence of the addition of homopolymers (PEP(X) and PEO(X), X=5k or 10k molecular weight) on the dynamics of the surfactant layer is studied with neutron spin echo spectroscopy (NSE). Combining the results with the previous findings for diblock copolymers allows for a better separation of viscosity and bending modulus effects. With the addition of homopolymers, a significant increase of the relaxation rate compared to the pure microemulsion has been observed. The influence on the bending rigidity kappa is measured with NSE experiments. Homopolymer addition reduces kappa by up to Deltakappa approximately -0.5k(B)T, whereas the diblock copolymer yields an increase of kappa by approximately 0.3k(B)T. Comparison of the bending moduli that are obtained by analysis of the dynamics to those obtained from small angle neutron scattering (SANS) sheds light on the different renormalization length scales for NSE and SANS. Variation of the surfactant concentration at otherwise constant conditions of homopolymer or diblock-copolymer concentration shows that NSE results are leading to the pure bending rigidity, while the renormalized one is measured with SANS.     

用双硫酯链转移法合成嵌段聚合物

研究了以双硫酯为链转移剂进行的均聚和嵌段共聚物的合成。首先合成大分子链转移剂,得到分子量可控、多分散性系数（PDI）较小（＜1.30）的均聚物。用末端带有双硫酯基因的PSt,PBMA和PBA为链转移剂,加入第二单体聚合得到分子量可控、且PDI较小的两嵌段聚合物。嵌段聚合时必须加入微量的自由基引发剂以形成大分子自由基,达到较好的控制聚合效果。     

Synthesis and photoresponsive behavior of azobenzene‐containing side‐chain liquid crystalline diblock polymers with polypeptide block

Well‐defined azobenzene‐containing side‐chain liquid crystalline diblock copolymers composed of poly[6‐(4‐methoxy‐azobenzene‐4′‐oxy) hexyl methacrylate] (PMMAZO) and poly(γ‐benzyl‐L ‐glutamate) (PBLG) were synthesized by click reaction from alkyne‐ and azide‐functionalized homopolymers. The alkyne‐terminated PMMAZO homopolymers were synthesized by copper‐mediated atom transfer radical polymerization with a bromine‐containing alkyne bifunctional initiator, and the azido‐terminated PBLG homopolymers were synthesized by ring‐opening polymerization of γ‐benzyl‐L ‐glutamate‐N‐carboxyanhydride in DMF at room temperature using an amine‐containing azide initiator. The thermotropic phase behavior of PMMAZO‐b‐PBLG diblock copolymers in bulk were investigated using differential scanning calorimetry and polarized light microscopy. The PMMAZO‐b‐PBLG diblock copolymers exhibited a smectic phase and a nematic phase when the weight fraction of PMMAZO block was more than 50%. Photoisomerization behavior of PMMAZO‐b‐PBLG diblock copolymers and the corresponding PMMAZO homopolymers in solid film and in solution were investigated using UV–vis. In solution, trans–cis isomerization of diblock copolymers was slower than that of the corresponding PMMAZO homopolymers. These results may provide guidelines for the design of effective photoresponsive anisotropic materials. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Phase behavior of binary blends of diblock copolymer/homopolymer confined in spherical nanopores

Binary blends of a diblock copolymer (AB) and an incompatible homopolymer (C) confined in spherical cavities are studied using a simulated annealing technique. The phase behavior of the blends is examined for four typical cases, representing the different selectivity of the pore surface to the A, B, and C species. The internal morphology of the spherical polymeric particles is controlled by the homopolymer volume fraction, the degree of confinement, and the composition of the copolymer. Inside a particle, the homopolymers segregate to form one or, under some conditions, two domains; thus, the homopolymers may act as an additional controlling parameter of the shape and symmetry of the copolymer domain. A rich array of confinement-induced novel diblock copolymer morphologies is predicted. In particular, core-shell particles with the copolymers as the shell wrapping around a homopolymer core or a copolymer-homopolymer combined core and Janus-like particles with the copolymers and the homopolymers on different sides are obtained.     

Complex coacervation core micelles. Colloidal stability and aggregation mechanism

Complex coacervation core micelles were prepared with various polyelectrolytes and oppositely charged diblock copolymers. The diblock copolymers consist of a charged block and a water-soluble neutral block. Our experimental technique was dynamic light scattering in combination with titrations. At mixing ratios where the excess charge of the polyelectrolyte mixture is approximately zero, micelles may be formed. The colloidal stability of these micelles depends on the block lengths of the diblock copolymers and the molecular weight of the homopolymers. In addition, the chemical nature of the corona blocks and nature of the ionic groups of the polyelectrolytes also influence the stability and aggregation mechanism. A corona block that is three times longer than the core block is a prerequisite for stable micelles. If this ratio is further increased, the molecular weight of the homopolymers as well as the type of the ionic groups starts to play a major role. With very asymmetric block length ratios, no micelles are formed. In addition, if the neutral block is too short, the polymeric mixture forms a macroscopic precipitate. With a constant core block, the aggregation number decreases with increasing corona block length, as is predicted by scaling models for polymeric micelles with a neutral corona.     

Effect of water addition on the coupling of homopolymers by click chemistry

Homopolymers bearing terminal azide and alkyne groups can be coupled via click chemistry to yield diblock copolymers. When performed in solvents that dissolved both homopolymers, the click reaction was found in this study to be inefficient, probably due to the embedding of the reactive end groups inside the random coils of the polymers. The efficiency was only slightly affected by the addition of a small amount of water into the reaction mixture. However, the reaction efficiency increased dramatically near the water volume fraction where one or both of the reacting polymers began to precipitate. Further increases in water content caused the polymer(s) to undergo macroscopic phase separation and the click reaction efficiency decreased once again. A possible explanation for the observed effect of water on the polymer coupling reaction is proposed. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Solution properties of styrene-p-chlorostyrene diblock copolymers—I. Conformational behaviour in dilute solutions

The conformational behaviour of styrene-p-chlorostyrene diblock copolymers in dilute solutions was studied and compared with that of the corresponding triblock copolymers. Eight styrene-p-chlorostyrene diblock copolymers, of almost equimolar composition but with different molecular weights, were prepared using an anionic polymerization technique. The intrinsic viscosities of the copolymers were measured in non-selective solvents, such as toluene and 2-butanone, and in a selective solvent, cumene. The osmotic second virial coefficients of the diblock copolymers were measured in toluene. The data were analysed on the basis of two parameter theories. The unperturbed dimensions for the diblock copolymers can be expressed as a composition average of those for the parent homopolymers and the long-range interaction parameters of the diblock copolymers in toluene, 2-butanone and cumene are smaller than those of the triblock copolymers of the same composition. It means that the diblock copolymer chains in these 3 solvents had a more compact conformation than the triblock copolymers of the same composition and molecular weight.     

The effect of compatibilization and rheological properties of polystyrene and poly(dimethylsiloxane) on phase structure of polystyrene/poly(dimethylsiloxane) blends

The compatibilization effect of polystyrene (PS)‐poly(dimethylsiloxane) (PDMS) diblock copolymer (PS‐b‐PDMS) and the effect of rheological properties of PS and PDMS on phase structure of PS/PDMS blends were investigated using a selective extraction technique and scanning electron microscopy (SEM). The dual‐phase continuity of PS/PDMS blends takes place in a wide composition range. The formation and the onset of a cocontinuous phase structure largely depend on blend composition, viscosity ratio of the constituent components, and addition of diblock copolymers. The width of the concentration region of the cocontinuous structure is narrowed with increasing the viscosity ratio of the blends and in the presence of the small amount diblock copolymers. Quiescent annealing shifts the onset values of continuity. The experimental results are compared with the volume fraction of phase inversion calculated with various theoretical models, but none of the models can account quantitatively for the observed data. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 898–913, 2004     

Pressure-induced formation of diblock copolymer "micelles" in supercritical fluids. A combined study by small angle scattering experiments and mean-field theory. II. Kinetics of the unimer-aggregate transition

We developed a simple time-dependent mean-field theory to describe the phase separation kinetics of either homopolymers or AB-diblock copolymers in supercritical (SC) fluids. The model, previously used to describe the phase behavior of AB-block copolymers under the assumption of strong solvent selectivity for just one copolymer chain, has been extended to study the kinetics of the phase separation process. Time resolved small angle x-ray scattering (TR-SAXS) measurements have been performed on different AB-diblock copolymers containing a perfluorinated chain and dissolved in SC-CO2. The data obtained over a wide range of pressure and temperature confirm our theoretical predictions. Particularly interesting is the presence of two relaxation frequencies for the homogeneous solution --> spherical aggregate transition, where the two relaxation processes depend on the depth of the pressure jump and on temperature. The whole phenomenon could be explained as an initial SC solvent/polymer phase separation followed by a slow reorientation process to form spherical aggregates driven by the copolymer solvophilic moiety.     

Phase behavior and interfacial properties of diblock copolymer-homopolymer ternary mixtures: Influence of volume fraction of copolymers and interaction energy

We use a Monte Carlo method to study the phase and interfacial behaviors of A-b-B diblocks in a blend of homopolymers, A and B, which are confined between two asymmetric hard and impenetrable walls. Our results show that, when the interaction strength is weak, the block copolymersare uniformly distributed in the ternary mixtures under considered concentrations. Under strong interaction strength, distribution region of the block copolymers changes from a single smooth interface to a curved interface or multi-layer interface in the ternary mixtures. Furthermore, our findings show that with increasing volume fraction of A-b-B diblock copolymer(фC), copolymer profiles broaden while фC≥ 0.4, a lamellar phase is formed and by further increasing фC, more thinner layers are observed. Moreover, the results show that, with the increase of фC, the phase interface first gradually transforms from plane to a curved surface rather than micelle or lamellar phase while with the increase of the interaction between A and B segments(ε_(AB)), the copolymer chains not only get stretched in the direction perpendicular to the interface, but also are oriented. The simulations also revealthat the difference between symmetric and asymmetric copolymers is negligible in statistics if the lengths of two blocksare comparable.     

Microfluidic fabrication of monodisperse biocompatible and biodegradable polymersomes with controlled permeability

We describe a versatile technique for fabricating monodisperse polymersomes with biocompatible and biodegradable diblock copolymers for efficient encapsulation of actives. We use double emulsion as a template for the assembly of amphiphilic diblock copolymers into vesicle structures. These polymersomes can be used to encapsulate small hydrophilic solutes. When triggered by an osmotic shock, the polymersomes break and release the solutes, providing a simple and effective release mechanism. The technique can also be applied to diblock copolymers with different hydrophilic-to-hydrophobic block ratios, or mixtures of diblock copolymers and hydrophobic homopolymers. The ability to make polymer vesicles with copolymers of different block ratios and to incorporate different homopolymers into the polymersomes will allow the tuning of polymersome properties for specific technological applications.     

Liquid-crystal Assembly of Semiflexible-coil/Homopolymer Blends: a Dissipative Particle Dynamics Study

The liquid-crystal assembly of semiflexible-coil diblock copolymers with coil or semiflexible homopolymers is studied by dissipative particle dynamics simulation. Phase diagrams of the blends and orientation ordering parameters among semiflexible blocks are constructed as a function of chain stiffness and homopolymer volume fraction. For semiflexible-coil/coil blends with varying stiffness of semiflexible blocks, we display the rich phase behaviors of the system transited from coil-coil/coil to rod-coil/coil blends. The disorder-lamellae or lamellae-liquid crystalline transition and “dry brush” phenomenon induced by coil homopolymers are observed. For semiflexible-coil/semiflexible blends, adding semiflexible homopolymers also leads to a disorder-order transition and even a transition between monolayer and bilayer smectic-A phase. The results demonstrate that blending homopolymers into semiflexible copolymers can induce liquid-crystal assembly and even improve the orientation ordering of semiflexible blocks effectively.     

Interplay of chemical and physical factors in reacting polymer blends. Theoretical considerations

Various effects produced by copolymers in polymer blends are discussed, with an emphasis on the role of interchain interactions. Simple theoretical models are considered to study the following problems: the interplay of diffusion and macromolecular reaction in compatible and incompatible blends, the stabilizing effect of premade diblock copolymer on the system of minor phase particles in incompatible blends, the kinetics of transesterification in a homogeneous blend. The effect of diblock copolymer on the Ostwald ripening in a polymer blend is stated in more details; the possibility of narrowing the size distribution of minor phase particles is predicted.     

Micellar characteristics of diblock polyacrylate-polyethylene oxide copolymers in aqueous media

The formation and structural features of micelles from low molecular weight diblock copolymers of poly(methylmethacrylate-b-ethylene oxide) PMMA-PEO (varying in total molecular weight) and poly(butylmethacrylate-b-ethylene oxide) PBMA-PEO in water, aqueous NaCl and urea solutions were examined by surface tension, dye spectral, cloud point, viscosity and small angle neutron scattering (SANS) measurements. The increasing concentrations of NaCl reduce the onset concentration of micellization and phase separation, while urea has reverse effect. The analysis of the SANS curves revealed the presence of prolate ellipsoidal micelles in diblock copolymers at various experimental concentrations and temperatures studied. The effect of temperature, NaCl and urea on the neutron scattering profiles are more or less the same which is well supported by viscosity and surface tension measurements. The diblock copolymers form spherical micelles of aggregation number in the range of 522-664. The micelles are very temperature stable.     

Theoretical aspects of small-angle neutron scattering from multiphase polymers

A molecular theory for small-angle neutron scattering from polymer mixtures is reviewed and extended to consider multiphase polymer systems such as block copolymers and their blends with homopolymers. Methods are developed for the isolation of scattering functions for individual components in these blends. These methods rely on two contrast-matching techniques: the concept of “composition matching,” where a mixture of deuterium-labeled and protonated species is used to match the contrast of a third component; and the synthesis of “phase-matched” block copolymers, where the contrast of the block copolymer sequences are matched. Methods are discussed specifically for the isolation of single chain and single sequence scattering functions for diblock and triblock copolymers, their blends with homopolymers, and star copolymers.     

The structure and phase transitions in polymer blends,diblock copolymers and liquid crystalline polymers: The Landau-Ginzburg approach

The polymer systems are discussed in the framework of the Landau-Ginzburg model. The model is derived from the mesoscopic Edwards Hamiltonian via the conditional partition function. We discuss flexible, semiflexible and rigid polymers. The following systems are studied: polymer blends, flexible diblock and multi-block copolymer melts, random copolymer melts, ring polymers, rigid-flexible diblock copolymer melts, mixtures of copolymers and homopolymers and mixtures of liquid crystalline polymers. Three methods are used to study the systems: mean-field model, self consistent one-loop approximation and self consistent field theory. The following problems are studied and discussed: the phase diagrams, scattering intensities and correlation functions, single chain statistics and behavior of single chains close to critical points, fluctuations induced shift of phase boundaries. In particular we shall discuss shrinking of the polymer chains close to the critical point in polymer blends, size of the Ginzburg region in polymer blends and shift of the critical temperature. In the rigid-flexible diblock copolymers we shall discuss the density nematic order parameter correlation function. The correlation functions in this system are found to oscillate with the characteristic period equal to the length of the rigid part of the diblock copolymer. The density and nematic order parameter measured along the given direction are anticorrelated. In the flexible diblock copolymer system we shall discuss various phases including the double diamond and gyroid structures. The single chain statistics in the disordered phase of a flexible diblock copolymer system is shown to deviate from the Gaussian statistics due to fluctuations. In the one loop approximation one shows that the diblock copolymer chain is stretched in the point where two incompatible blocks meet but also that each block shrinks close to the microphase separation transition. The stretching outweights shrinking and the net result is the increase of the radius of gyration above the Gaussian value. Certain properties of homopolymer/copolymer systems are discussed. Diblock copolymers solubilize two incompatible homopolymers by forming a monolayer interface between them. The interface has a positive saddle splay modulus which means that the interfaces in the disordered phase should be characterized by a negative Gaussian curvature. We also show that in such a mixture the Lifshitz tricritical point is encountered. The properties of this unusual point are presented. The Lifshitz, equimaxima and disorder lines are shown to provide a useful tool for studying local ordering in polymer mixtures. In the liquid crystalline mixtures the isotropic nematic phase transition is discussed. We concentrate on static, equilibrium properties of the polymer systems.     

Density functional theory for copolymers confined in a nanoslit

A density functional theory is developed for copolymers confined in a nanoslit on the basis of our previous work for homopolymers. The theory accurately captures the structural characteristics for diblock and alternating copolymers composed of hard-sphere or square-well segments. Satisfactory agreement is obtained between the theoretical predictions and simulation results in segment density profiles, segment fractions, and partition coefficients. Structures under confinement strongly depend on the substituent segment sizes for the hard-sphere copolymers and also on the segment-wall attractions for the square-well copolymers. Alternating copolymers are found to behave as homopolymers with effective segment size, and effective segment-segment and segment-wall interactions.     

可逆加成-断裂链转移方法合成两亲液晶嵌段功能大分子及其自组装的研究

采用可逆加成-断裂链转移(RAFT)可控聚合反应方法,合成制备了一系列窄分子量分布、结构规整的两亲液晶嵌段功能大分子聚甲基丙烯酸亚己基胆固醇酯-b-聚甲基丙烯酸羟乙酯(PMA6Chol-block-PHEMA).运用核磁共振(NMR)、凝胶渗透色谱仪(GPC)、示差扫描热分析仪(DSC)和热失重分析仪(TGA)对制备所得两亲嵌段功能大分子的化学结构、热物理性能以及液晶相结构与转变温度进行了研究.在此基础上,采用纳米沉淀法研究了所得系列液晶嵌段功能大分子在混合溶剂中的自组装,制备得到微米尺度球形组装体.研究结果表明刚性胆固醇液晶共聚单元的存在对于溶液自组装产生重要影响.     

Formation and structure of the microemulsion phase in two-dimensional ternary AB+A+B polymeric emulsions

We present an analysis of the structure of the fluctuation-induced microemulsion phase in a ternary blend of balanced AB diblock copolymers with equal amounts of A and B homopolymers. To this end, graphical analysis methods are employed to characterize two-dimensional configuration snapshots obtained with the recently introduced field-theoretic Monte Carlo method. We find that a microemulsion forms when the mean curvature diameter of the lamellar phase coincides roughly with the periodicity of the lamellar phase. Further, we provide evidence to the effect of a subclassification of the microemulsion into a genuine and a defect-driven region.     

Interfacial tension of a demixed A/B polymer blend with A-B diblock copolymer near the critical point

Effects of A-B diblock copolymers on the interfacial tension of a demixed homopolymer A/B blend near the critical point has been studied theoretically and experimentally. A simple theory developed here predicts that a crossover from weak to strong reduction of interfacial tension with addition of a small amount of diblock copolymers can be observed upon going away from the critical temperature, where the interfacial tension exhibits a maximum in its temperature dependence, if polymeric index of the diblock copolymer is much larger than that of the homopolymers. The temperature of the maximum approaches the critical point with increasing copolymer concentration. These predictions have experimentally been confirmed for a demixed oligo(styrene)/oligo(dimethylsiloxane) blend with poly(styrene)-block-poly(dimethylsiloxane).