The influence of nanodisperse iron(III) oxide on the morphology of microsized alumina fibers

The influence of fine-disperse iron oxide particles on the structure of alumina fibers prepared via the template synthesis has been studied. The template (fibers of bleached cotton cellulose) has been impregnated with mixed aqueous dispersions of aluminum and iron(III) hydroxides prepared via the sol–gel route. Thermal treatment of the precursor has afforded alumina ceramic fibers with average diameter of 3–10 µm containing uniformly distributed iron(III) oxide nanoparticles at the surface. Increase of the iron(III) oxide nanoparticles concentration has deteriorated the texture properties of the product.     

Long-Term Colloidally Stable Aqueous Dispersions of ≤5 nm Spinel Ferrite Nanoparticles

Applications in biomedicine and ferrofluids, for instance, require long-term colloidally stable, concentrated aqueous dispersions of magnetic, biocompatible nanoparticles. Iron oxide and related spinel ferrite nanoparticles stabilized with organic molecules allow fine-tuning of magnetic properties via cation substitution and water-dispersibility. Here, we synthesize≤5 nm iron oxide and spinel ferrite nanoparticles, capped with citrate, betaine and phosphocholine, in a one-pot strategy. We present a robust approach combining elemental (CHN) and thermal gravimetric analysis (TGA) to quantify the ratio of residual solvent molecules and organic stabilizers on the particle surface, being of particular accuracy for ligands with heteroatoms compared to the solvent. SAXS experiments demonstrate the long-term colloidal stability of our aqueous iron oxide and spinel ferrite nanoparticle dispersions for at least 3 months. By the use of SAXS we approved directly the colloidal stability of the nanoparticle dispersions for high concentrations up to 100 g L⁻¹.     

Interplay of colloidal stability of cellulose nanocrystals and their dispersibility in cellulose acetate butyrate matrix

Cellulose nanocrystals (CNC) prepared from eucalyptus cellulose CNCs were modified by the reaction with methyl adipoyl chloride, CNCm, or with a mixture of acetic and sulfuric acid, CNCa. The CNC were either dispersed at 0.1 wt% in the pure solvents ethyl acetate (EA), tetrahydrofuran (THF) and dimethylformamide (DMF) or in cellulose acetate butyrate (CAB) solutions prepared in these solvents at 0.9 wt%. The colloidal behavior of these dispersions was systematically investigated using a phase separation analyzer LUMiReader^®. The mechanical properties and morphological features of the films resulting from the mixtures of CAB and CNC were determined by dynamic mechanical analysis, optical microscopy and atomic force microscopy, respectively. Regardless the functional group attached to the surface of CNC, the best colloidal stability was observed for dispersions prepared in CAB/DMF solution. Higher degree of substitution of modified CNCs favored the colloidal stability in EA and THF. Composite films prepared from CAB/DMF solutions were more homogeneous and presented better mechanical performance than those prepared in CAB/EA or CAB/THF. The mechanical performance of composites and neat CAB prepared from DMF was CAB/CNCs > CAB/CNCm > CAB/CNCa > CAB, indicating that the modification weakens the percolation process, which is mediated by H bonding.     

Influence of high loading of cellulose nanocrystals in polyacrylonitrile composite films

Polyacrylonitrile-co-methacrylic acid (PAN-co-MAA) and cellulose nanocrystal (CNC) composite films were produced with up to 40 wt% CNC loading through the solution casting method. The rheological properties of the solution/suspensions and the structural, optical, thermal, and mechanical properties of the resulting films were investigated. The viscosity of the composite suspensions increased with higher CNC loadings and with longer aging times. PAN-co-MAA/CNC films maintained a similar level of optical transparency even with up to 40 wt% CNC loading. The glass transition temperature (Tg) increased from 92 to 118 °C, and the composites had higher thermal stability below 350 °C compared to both neat PAN-co-MAA and neat CNC. The mechanical properties also increased with higher CNC loadings, elastic modulus increased from 2.2 to 3.7 GPa, tensile strength increased from 75 to 132 MPa, and the storage modulus increased from 3.9 to 10.5 GPa. Using the Kelly and Tyson model the interfacial shear strength between the PAN-co-MAA and CNC was calculated to be 27 MPa.     

Preparation of cellulose-based fluorescent materials using Zinc sulphide quantum dot-decorated graphene by a one-step hydrothermal method

Cellulose-based fluorescent materials using Zinc sulphide (ZnS) quantum dot-decorated graphene were prepared by a one-step hydrothermal method. X-ray photoelectron spectroscopy analysis identified the chemical states of Zn, S, C, O, and N in the composite paper. Transmission electron microscopy showed that the graphite oxide was reduced to graphene sheets, and ZnS nanoparticles (<10 nm) were deposited on the surface of these sheets. Scanning electron microscopy indicated that graphene sheets were attached to the surface of paper fibers, and the paper structure and morphology of the fibers were not observably damaged during the hydrothermal reaction. The cellulose-based composite had strong ultraviolet absorption in the range of 200–340 nm, and its main absorption peak was at approximately 296 nm. The band edge emission of photoluminescence spectrum of the composite occurred at 466 nm with an excitation wavelength of 320 nm. The laser scanning confocal microscope image of the composite exhibited an intense blue fluorescence under UV light at 405 nm.     

Structural characterization of nano-crystalline Co3O4 ultra-fine fibers obtained by sol–gel electrospinning

In this paper, we report the obtention of ultrafine fibers of cobalt oxide (Co₃O₄) by combining electrospinning method with high-temperature calcinations from the precursor sol of poly(2-ethyl-2-oxazoline) (PEtOx)/cobalt acetate tetrahydrate [Co(CH₃COO)₂·4H₂O] in water. The optimum electrospinning conditions for obtaining precursor composite nanofibers from PEtOx/Co(CH₃COO)₂·4H₂O solution in water, to produce ceramic nanofibers, were studied. The average fiber diameter of the precursor composite fibers measured by scanning electron microscopy (SEM) was approximately 200 nm. Thermogravimetric analysis of PEtOx was performed to estimate the suitable calcination temperature of the precursor fibers. SEM images of the ceramic fibers obtained after calcination revealed the shrinkage in diameter due to complete degradation of the polymer and Co(CH₃COO)₂·4H₂O. Fourier transform infrared spectroscopy was used to ensure the complete pyrolysis of polymer during calcinations of the composite fibers. Crystalline properties of the ceramic fibers were studied by X-ray diffraction and high resolution transmission electron microscopy. The ceramic fibers are polycrystalline with an average grain size of ≈40 nm obtained at a calcination temperature of 773 K. It was observed that the grain sizes increased as the calcination temperature was increased, due to self assembly mechanism.     

Superhydrophobic polymer‐particle composite films produced using various particle sizes

Hydrophilic alumina (Al₂O₃) nanoparticles (25, 35, and 150 nm) are dispersed in different concentrations in solutions of a commercial hydrophobic poly(alkyl siloxane) (Silres BS‐290), and the suspensions are sprayed on glass surfaces. Static contact angles (θ_S), measured on surfaces of siloxane‐nanoparticle composite films that were prepared from dilute dispersions, increase rapidly with particle concentration. Composite films prepared from concentrated dispersions exhibit a maximum, constant θ_S (at saturation θ_S is 160°), which is not affected by the size of the particles. These films exhibit also very small contact angle hysteresis (5°), which is also independent of the particle size. Consequently, the same superhydrophobic character can be induced in siloxane films using nanoparticles, which can range from a few up to several tenths of nanometers. However, the particle size and more precisely the particle specific surface area affects dramatically the minimum critical particle concentration, which must be used in the dispersions to induce superhydrophobicity on the surface of the composite films, that is, to achieve θ_S = 150°. It is shown that critical particle concentration decreases exponentially with specific surface area. This result can be important for manufacturers of superhydrophobic surfaces who are interested in having a good control on the wettability of the composite films. Copyright © 2012 John Wiley & Sons, Ltd.     

Tuning percolation speed in layer-by-layer assembled polyaniline–nanocellulose composite films

Polyaniline of low molecular weight (ca. 10 kDa) is combined with cellulose nanofibrils (sisal, 4–5 nm average cross-sectional edge length, with surface sulphate ester groups) in an electrostatic layer-by-layer deposition process to form thin nano-composite films on tin-doped indium oxide (ITO) substrates. AFM analysis suggests a growth in thickness of ca. 4 nm per layer. Stable and strongly adhering films are formed with thickness-dependent coloration. Electrochemical measurements in aqueous H₂SO₄ confirm the presence of two prominent redox waves consistent with polaron and bipolaron formation processes in the polyaniline–nanocellulose composite. Measurements with a polyaniline–nanocellulose film applied across an ITO junction (a 700 nm gap produced by ion beam milling) suggest a jump in electrical conductivity at ca. 0.2 V vs. SCE and a propagation rate (or percolation speed) two orders of magnitude slower compared to that observed in pure polyaniline This effect allows tuning of the propagation rate based on the nanostructure architecture. Film thickness-dependent electrocatalysis is observed for the oxidation of hydroquinone.

     

Preparation and nonlinear optical properties of Au nanoparticles doped TiO2 thin films

Nano-sized noble metal nanoparticles doped dielectric composite films with large third-order nonlinear susceptibility due to the confinement and the enhancement of local field were considered to be applied for optical information processing devices, such as optical switch or all optical logical gates. In this paper, sol–gel titania thin films doped with gold nanoparticles (AuNPs, ~10 nm in average size) were prepared. AuNPs were firstly synthesized from HAuCl₄ in aqueous solution at ~60 °C, using trisodium citrate as the reducing agent, polyvinylpyrrolidone as the stable agent; then the particle size and optical absorption spectra of the AuNPs in aqueous solutions were characterized by transmitting electron microscopy and UV–Vis–NIR spectrometry. Sol–gel 2AuNPs–100TiO₂ (in %mol) thin films (5 layers, ~1 μm in thickness) were deposited on silica glass slides by multilayer dip-coating. After heat-treated at 300–1,000 °C in air, the AuNPs–TiO₂ thin films were investigated by X-ray diffraction, scanning electron microscopy and atomic force microscopy. The nonlinear optical properties of the AuNPs–TiO₂ thin films were measured with the Z-scan technique, using a femtosecond laser (200 fs) at the wavelength of 800 nm. The third-order nonlinear refractive index and nonlinear absorption coefficient of 2AuNPs–100TiO₂ films were at the order of 10^?12 cm²/W, and the order of 10^?6 cm/W, respectively, and the third-order optical nonlinear susceptibility χ⁽³⁾ was ~6.88 × 10^?10 esu.     

High-k titanium–aluminum oxide dielectric films prepared by inorganic–organic hybrid solution

In this paper, high-k titanium–aluminum oxide (ATO) dielectric film has been realized by using organic–inorganic hybrid precursor solution. X-ray diffraction pattern revealed that the ATO films (Ti content less than 67 at%) remain amorphous phase for annealing treatment at 400 °C. And all of the amorphous ATO films had very smooth and uniform surface with root mean square (RMS) roughness of less than 0.5 nm. Meanwhile, the results showed that the ATO film (Ti:Al = 1:8) had the best performance, including RMS roughness of 0.33 nm, relative permittivity of 15, and leakage current density of 1.41 × 10^?6 A/cm² at 1 MV/cm.     

Structure,optical and magnetic properties of LaFeO3 nanoparticles prepared by polymerized complex method

This work reports the study the structure, optical and magnetic properties of LaFeO₃ nanoparticles synthesized by the polymerized complex method. The LaFeO₃ nanoparticles were successfully obtained from calcination of the precursor at different temperatures from 750 to 1,050 °C in air for 2 h. The calcined LaFeO₃ nanoparticles were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), UV–Visible spectroscopy, X-ray photoelectron spectroscopy (XPS), X-ray absorption near edge spectroscopy (XANES) and vibrating sample magnetometry. The XRD and TEM results showed that all LaFeO₃ samples had a single phase nature with the orthorhombic structure. The estimated crystallite sizes were in the range of 44.5 ± 2.4–74.1 ± 4.9 nm. UV–Vis spectra showed strong UV and Vis absorption with small band gap energy. The valence states of Fe ions were in the Fe³⁺ and Fe⁴⁺ state, as confirmed by XPS and XANES results. The weak ferromagnetic behavior with specific saturation magnetization of 0.1 emu/g at 10 kOe was obtained for the small particle of 44.5 ± 2.4 nm. The uncompensated spins at the surface was proposed as playing a part in the magnetic properties of small sized LaFeO₃.     

Biodegradable magnetic gel: synthesis and characterization

Biodegradable polymer-based magnetic gels have been synthesized using hydroxypropyl cellulose and maghemite. These magnetic gels have a network of nanoparticles of hydroxypropyl cellulose (30–100 nm) and a homogeneous distribution of nanosized maghemite (~7 nm). This has been observed in a STEM micrograph. The surface structure of the gels has been observed by atomic force microscopy, while transmission electron microscopy has shown the distribution of iron oxide in HPC gel nanoparticles. These gels have magneto-elastic properties. The magnetic susceptibility and magnetization of these gels are measured by a superconducting quantum interference device magnetometer.     

Soy protein–nanocellulose composite aerogels

Organic aerogels based on two important and widely abundant renewable resources, soy proteins (SP) and nanofibrillar cellulose (NFC) are developed from precursor aqueous dispersions and a facile method conducive of channel- and defect-free systems after cooling and freeze-drying cycles that yielded apparent densities on the order of 0.1 g/cm³. NFC loading drives the internal morphology of the composite aerogels to transition from network- to fibrillar-like, with high density of interconnected cells. Composite aerogels with SP loadings as high as ca. 70 % display a compression modulus of 4.4 MPa very close to that obtained from reference, pure NFC aerogels. Thus, the high compression modulus of the composite system is not compromised as long as a relatively low amount of reinforcing NFC is present. The composite materials gain moisture (up to 5 %) in equilibrium with 50 % RH air, independent of SP content. Furthermore, their physical integrity is unchanged upon immersion in polar and non-polar solvents. Fast liquid sorption rates are observed in the case of composite aerogels in contact with hexane. In contrast, water sorption is modulated by the chemical composition of the aerogel, with an important contribution from swelling. The potential functionalities of the newly developed SP–NFC composite green materials can benefit from the reduced material cost and the chemical features brought about the amino acids present in SPs.     

Effect of continuous magnetic field on the growth mechanism of nanoporous anodic alumina films on different substrates

The effects induced by an external homogeneous magnetic field on the oxide film growth on aluminum in aqueous solutions of oxalic and sulfuric acid and on surface morphology of the alumina films were studied. Aluminum films of 100 nm thickness were prepared by thermal evaporation on SiO₂/Si and glass-ceramic substrates. The pore diameter for oxalic acid alumina films on the SiO₂/Si substrate decreased by 0.8 nm, the interpore distance by 5.9 nm, and cell diameter by 6.9 nm if a magnetic field of 0.5 T was applied. When aluminum was anodized in sulfuric acid on the same substrate, the significant changes in parameters of porous structure of alumina, which were similar to the ones in oxalic acid, are firstly observed in stronger magnetic fields (of 0.7 T). On the basis of data obtained in this study and of previous investigation on the negative space charge and thermally activated defects in anodic alumina, we concluded that the intensity of the magnetic field is associated with energy of electron traps and that the changes of cell diameter characterize the trap concentration. The energy of electron traps in oxalic acid alumina films was proved to be smaller than the one in films formed in sulfuric acid, but the concentration of traps was of the same order of magnitude. When the substrate was replaced with the glass-ceramic one, the pore diameter in oxalic acid alumina films increased to ca. 17.6 nm.     

The bark biorefinery: a side-stream of the forest industry converted into nanocomposites with high oxygen-barrier properties

The purpose of the bark biorefinery concept is to upgrade the different constituents present in bark to multiple value-added bio-based products. Non-cellulosic polysaccharides (NCP) and cellulose nanocrystals (CNC) sequentially isolated from the inner bark of Norway spruce were used as raw materials for the formulation of renewable nanocomposites. The film formation abilities of NCP/CNC formulations prepared with different proportions of CNC were studied. Homogeneous transparent films with a glossy appearance were obtained when more than 30 wt% CNC was incorporated. The influence of the CNC content on the NCP/CNC films was assessed in terms of structural, thermal, mechanical and oxygen-barrier properties. All the films showed better performances with increasing CNC content, which was explained by the strong interactions between the two components. The effect on the film performances of adding sorbitol as a plasticizer was also evaluated. The presence of sorbitol decreased the thermal stability, the stiffness and the oxygen permeability of the films at 80 % RH. However, the addition of sorbitol enhanced the elongation of the films and further improved their oxygen-barrier properties at 50 % RH. The composite properties could thus be tailored by adding different amounts of sorbitol and CNC, resulting in all-carbohydrate materials with performances similar to or even better than the conventional barrier materials used in packaging.     

Water-Soluble Magnetic Nanocomposites Based on Carboxymethyl Cellulose and Iron(III) Oxide

The one-step synthesis of water-soluble composites from maghemite (γ-Fe₂O₃) nanoparticles with a diameter of 12 ± 4 nm and a biocompatible polysaccharide, namely, sodium salt of carboxymethyl cellulose, is described. The role of the polymer matrix consists in stabilization of the resulting nanoparticles by the electrostatic interaction of polymer carboxyl groups with the surface atoms of iron in the (3+) oxidation state. The dissolution of the composites in water affords aggregatively stable dispersions responding to the external magnetic field. The content of the magnetic phase (iron oxide) in the formulation of the maghemite–carboxymethyl cellulose composite is defined by the ratio of components during the synthesis.     

Effects of silver nanoparticles doping on morphology and luminescence behaviour of ferroelectric liquid crystals Langmuir–Blodgett films

We report the deposition of Langmuir–Blodgett (LB) thin films of low-weight dispersed composite systems of ferroelectric liquid crystals (FLCs)–functionalised silver (Ag) nanoparticles. Because of their amphiphilic nature the molecules form stable Langmuir monolayers, which were transferred to silicon substrates. We noticed that absorption wave numbers are present for each bond constituting FLC–nanoparticles composite system, ensuring a complete transfer of molecules from water sub-phase. XRD showed intense peaks at 2θ = 3.2° due to the layer structure of FLC molecules. We infer from the morphology of LB films that doping of nanoparticles do not provide any hindrance to SmC* layer structure of FLC molecules. The photoluminescence study indicates blue shift in emission spectra and peak intensity increases with Ag nanoparticles concentration.     

Structural,electrical and optical properties of tin doped cadmium oxide thin films obtained by sol–gel

Transparent and conducting tin doped cadmium oxide thin films were obtained by mixing cadmium oxide and tin oxide precursor solutions by the sol–gel method. Different tin contents in solution were studied: 0, 0.5, 1, 2, 3, 5 and 10 at.%. The films were sintered at 550 °C and, after that, annealed in N₂/H₂ gas mixture, in order to decrease their resistivity. X-ray diffraction patterns showed that doping of tin diminishes the [111] light preferred orientation of films and provokes a decrease of the average crystallite size from 30 to 12 nm. Atomic force microscopy images revealed morphological changes with the addition of tin content. All the films showed a high transmission around 75 % in the 600 < λ < 1,700 nm range and a shift of the absorption edge towards the blue region as the tin concentration was increased. The cadmium oxide films doped with 1 at.% of tin showed the lowest resistivity of 5.7 × 10^?4 Ω cm and a band gap energy value of 2.7 eV. For their characteristics, these CdO:Sn films are good candidates as transparent conductive electrodes in CdS/CdTe and CdS/CIGS type solar cells.     

Carbon nanocones/discs – a new type of filler to improve the thermal and mechanical properties of polymer films

The mechanical characteristics and thermal properties of composite films based on the thermally stable aromatic polyimide (PI) (PMDA‐ODA) and carbon nanocones/discs (CNC) were studied. The introduction of CNC to PMDA‐ODA leads to the substantial increase of film stiffness. The Young's modulus values of the composite films are somewhat higher than those of the previously characterized composite films of this PI filled with nanoclay, carbon nanofibers, and asbestos‐like hydrosilicate nanotubes. The introduction of CNC into PMDA‐ODA (concentrations of CNC were up to 15 vol%) does not cause any marked aggregation of nanoparticles. The presence of CNC in the PI matrix does not affect the glass transition temperature of the polymer but hinders chain mobility at temperatures above T_g. This behavior makes it possible to increase the working temperature range of the composite films containing more than 5 vol% of CNCs, up to the temperature of thermal decomposition. The introduction of CNC into PMDA‐ODA leads to dramatic (～12 orders of magnitude) increase of active electrical conductivity of the material. Copyright © 2011 John Wiley & Sons, Ltd.     

Synthesis of TiO2/Bi2WO6 nanofibers with electrospinning technique for photocatalytic methyl blue degradation

TiO₂/Bi₂WO₆ composite nanofibers have been successfully synthesized by a simple electrospinning process. XRD, SEM, HR-TEM, nitrogen adsorption–desorption isotherms and UV–visible diffuse reflectance spectra were used to characterize the composite nanofibers. The composite fibers with diameters about 100 nm was composed of nanoparticles and possessed of high specific surface area (49.6 m² g^?1) and porous structure. Besides, the TiO₂/Bi₂WO₆ composite nanofibers exhibited excellent visible photocatalytic property in the photodegradation of methylene blue (MB), and over 97.2 % of MB was degraded within 5.5 h.