Antimicrobial finishing of cotton textile based on water glass by sol–gel method

A low temperature and cost-effective process for antimicrobial finishing of cotton textiles has been developed by sol–gel method. The antimicrobial treatment was performed by treating cotton textile with silica sols from water glass and then with silver nitrate solution. The antimicrobial activity was determined by using E. coli as a model for Gram-negative bacteria. The results showed that the treated textile has an excellent antimicrobial effect and laundering durability. SEM analysis showed coarse surface morphological change on the water glass treated cotton textile. The residual concentration of silver ion on fabrics was informed by ICP-MS. XPS results indicated that two different states of silver were present on the surface of the antimicrobial textile.     

Study of antimicrobial properties of cotton medical textiles treated with citric acid and dried/cured by microwaves

The purpose of this study was to examine antibacterial and antifungal activity of antibacterial finish based on Citric acid on cotton medical textiles. The ability to effectively reduce the number of gram-negative, gram-positive bacteria and yeast was evaluated, specifically comparing the antibacterial activity after two different drying/curing methods. Citric acid (CA) and diethyl–tetradecyl–[3–(trimethoxysilyl)-propyl] ammonium chloride (Quat) were used for hygiene and disinfection purposes of medical textiles in this study. It was applied by pad-dry process and its fixation to cellulose hydroxyls was enhanced either by high curing temperatures or microwaves (MW). Determination of antibacterial activity of finished products was performed according to ISO 20743:2007 standard before the washing and after the 10 washing cycles. Antibacterial activity was tested against gram-negative bacteria, Escherichia coli, gram-positive-Staphylococcus aureus and yeast, Candida albicans. Obtained results are confirming the possibility of eco-friendly CA application, for the purpose of antimicrobial finishing of cotton medical textiles. Prevention of nosocomial infections with the Citric acid is possible using both curing methods (convection and microwave) and furthermore, the treatment is durable up to 10 washing cycles. Citric acid, as one of the suitable active substances is crosslinked to the cellulose hydroxyls by the formation of ester linkages. Its antimicrobial effectiveness against the chosen microorganisms proved to be the best against S. aureus. Applied finish bath has additional crease proof effectiveness providing sufficient both antimicrobial and crease proof effectiveness, so as the durability against 10 washing cycles.     

UV protective textiles by the deposition of functional ethylcellulose nanoparticles

Ethylcellulose (EC) nanoparticles have been widely investigated for their use as drug delivery systems. However, their application on the textile field has been hardly studied. In this work, the use of EC nanoparticles as nanocarriers of active or lipid soluble compounds and their subsequent deposition on cotton textile is proposed in order to obtain functional textiles. A UV protective textile has been obtained after deposition of EC nanoparticles loaded with a liposoluble UV filter on cotton fabrics. The EC/cotton affinity and the attachment mechanism of EC nanoparticles on cotton substrate was studied by means of thermal behaviour evaluation, estimation of adhesion work (W_A) and wash resistance tests. It is proposed that during EC nanoparticles deposition on cotton fabric, entanglement of polymeric chains is favoured, thus improving adhesion of EC nanoparticles on cotton substrate. The functionality of cotton textile was assessed by ultraviolet protection factor (UPF) measurements, showing a high UPF value (UPF = 45). Evaluation of UPF as a function of washing cycles were carried out on treated cotton fabrics. Washed fabrics still provided good UV protection (UPF ≥ 25), evidencing the presence of nanoparticles after washing cycles and the durability of the conferred functionality.     

Toward a comprehensive understanding of textiles functionalized with silver nanoparticles

This article provides a comprehensive understanding of development of textiles functionalized with silver nanoparticles (AgNPs). There are three established methods to fabricate textiles functionalized with AgNPs, namely, solution‐immersion, layer‐by‐layer deposition, and sonochemical. In addition, several textile types such as cotton, wool, polyester, silk, cotton/polyester blend, polyamide, and regenerated cellulose have been used for the fabrication. The AgNP deposition mechanism on textiles is mainly due to electrostatic interaction between AgNPs and textile constituents. It was exhibited that the deposition of AgNPs on textiles can transform their textiles colors. In addition, it was demonstrated that the deposition of AgNPs on textiles is not permanent, particularly against washing treatment. Textiles modified with AgNPs have several promising applications such as antibacterial, antifungal, catalyst, electronic devices, water treatment, sun protection, air treatment, and surface‐enhanced Raman scattering, which are comprehensively discussed in this article. Future challenges in fabricating textiles functionalized with AgNPs remain on how this can be carried out to improve long‐term stabilization of AgNPs on textiles to achieve their permanent deposition by employing greener approaches.     

Chemical and ultrastructural changes in cotton cellulose induced by laundering and textile use

The textile industry is currently under pressure to decrease environmental load related to both the manufacture and the use of textiles. Material recycling may be one of many ways to accomplish such a decrease. Age-induced property changes in cotton textiles are important to understand in order to facilitate the recycling of cotton textiles. Consequently, this study investigates ultrastructural and chemical changes that take place in the cellulose of cotton sheets over a long time period of use and laundering. Ultrastructural changes were studied using water retention value (WRV), specific surface area measurement, scanning electron microscopy and solid state NMR spectroscopy. Chemical changes through measurement of intrinsic viscosity with and without reductive treatment, molecular mass distribution and carboxylate group content. A substantial decrease in mass average molecular mass from 1,320 to 151 kDa was observed when subjecting the sheets to more than 50 launderings. In contrast, only small differences in WRV, in fibril dimensions and crystallinity estimated using solid state NMR spectra, were observed between sheets laundered 2–4 times and more than 50 times. On one hand, the combination of minor laundering effects of WRV and solid state NMR spectra, together with the large decrease in molecular mass are positive indications for the possibility of recycling cotton into regenerated cellulosic fibres. On the other hand, results show that the specific surface area decreased, which implies that the reactivity of cotton cellulose may decrease during long-term use and laundering.     

Multi-Hollow Surface Dielectric Barrier Discharge for Bacterial Biofilm Decontamination

The plasma-activated gas is capable of decontaminating surfaces of different materials in remote distances. The effect of plasma-activated water vapor on Staphylococcus epidermidis, methicillin-resistant Staphylococcus aureus, Pseudomonas aeruginosa, and Escherichia coli biofilm contamination was investigated on the polypropylene nonwoven textile surface. The robust and technically simple multi-hollow surface dielectric barrier discharge was used as a low-temperature atmospheric plasma source to activate the water-based medium. The germicidal efficiency of short and long-time exposure to plasma-activated water vapor was evaluated by standard microbiological cultivation and fluorescence analysis using a fluorescence multiwell plate reader. The test was repeated in different distances of the contaminated polypropylene nonwoven sample from the surface of the plasma source. The detection of reactive species in plasma-activated gas flow and condensed activated vapor, and thermal and electrical properties of the used plasma source, were measured. The bacterial biofilm decontamination efficiency increased with the exposure time and the plasma source power input. The log reduction of viable biofilm units decreased with the increasing distance from the dielectric surface.     

Polyamide grafted with polypyrrole: formation, properties, and stability

Conducting textiles of polyamide (PA) fabrics and polypyrrole (PPy) were prepared by in situ oxidative chemical polymerisation of pyrrole (Py) on the surface of PA textiles using FeCl₃ as oxidant. The anionic surfactant, dodecylbenzenesulphonic acid, was used as co-dopant during Py polymerisation on the textile surface. The influence of the monomer amount and polymerisation conditions on formation of the conducting PPy layer, conductivity, morphology, and stability of the prepared PA/PPy was studied. The conductivity of modified textiles decreased rapidly after the washing process, so a special Py-functionalised silane (1-(3-(triethoxysilyl)propylamino)-3-(1-H-pyrrole-1-yl)propan-2-ol; SP) was synthesised and applied to the PA surface prior to PPy formation. The presence of SP on the PA surface after completion of the sol-gel process was verified by Fourier transform infrared spectroscopy with an attenuated total reflectance. Pyrrole polymerisation was subsequently applied to the SP pre-treated textile surface. The influence of SP concentration on both the fastness of the conducting layer after the washing process and stability of the electrical conductivity of the prepared PA/PPy samples was investigated. Surface conductivity of the samples treated and untreated by the sol-gel process of SP was measured both prior to and after washing of the prepared textiles. It was found that an application of 0.6 mass % of SP significantly improved the fastness of the PPy layers. Examination of the modified PA surface using scanning electron microscopy disclosed the differences in the formation of PPy on PA textiles when using SP and also showed differences on the PPy modified textile surface prior to and after washing. The method of X-ray photoelectron spectroscopy was used for a detailed study of the surface composition. It was confirmed that the pre-treatment with Py-functionalised triethoxysilane significantly influenced the chemical composition of the PA surface modified with PPy.     

ZnO-TiO2 hybrid nanocrystal-loaded,wash durable,multifunction cotton textiles

Life-threatening diseases, especially those caused by pathogens and harmful ultraviolet radiation (UV-R), have triggered increasing demands for comfortable, antimicrobial, and UV-R protective clothing with a long service life. However, developing such textiles with exceptional wash durability is still challenging. Herein, we demonstrate how to fabricate wash durable multifunctional cotton textiles by growing in situ ZnO-TiO₂ hybrid nanocrystals (NCs) on the surface of cellulosic fabrics. The ZnO-TiO₂ hybrid NCs presented high functional efficiency, owing to their high charge transfer/separation. Ultrafine fiber surface pores, utilized as nucleating sites, endowed the uniform growth of NCs and their physical locking. The resulting fabrics presented excellent UV protection factors up to 54, displayed bactericidal efficiency of 100% against Staphylococcus aureus and Escherichia coli, and optimum self-cleaning efficacy. Moreover, the functionalized textiles exhibited robust washing durability, maintaining antibacterial and anti-UV-R efficiency even after 30 extensive washing cycles.

Graphical abstract

     

The antimicrobial activity of the cotton fabric grafted with an amino-terminated hyperbranched polymer

An amino-terminated hyperbranched polymer (HBP-NH₂) was grafted to cotton fabric by a reaction between the aldehyde groups of oxidized cotton fabric and the amino groups of the HBP-NH₂ to provide cotton fabric with durable antimicrobial properties. The antimicrobial activities of the HBP-NH₂ aqueous solutions and the HBP-NH₂ grafted cotton fabrics were evaluated quantitatively against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli). The results indicated that the HBP-NH₂ grafted cotton fabric showed 92% of bacterial reduction to S. aureus and 95% of bacterial reduction to E. coli, respectively. The antimicrobial activities of the HBP-NH₂ grafted cotton fabrics were maintained at over 91% reduction level even after being exposed to 20 consecutive home laundering conditions. Several influence factors, which may affect the amount of HBP-NH₂ grafted onto the cotton fabrics, were also discussed.     

Biocompatible antimicrobial cotton modified with tricarbimide‐based N‐halamine

Two N‐halamine precursors, 1‐glycidyl‐s‐triazine‐2,4,6‐trione and 1‐(2,3‐dihydroxypropyl)‐s‐triazine‐2,4,6‐trione, were synthesized and tethered onto cotton fabrics via the crosslinking agent 1,2,3,4‐butanetetracarboxylic acid. The modified samples were characterized by Fourier Transform Infrared Spectroscopy (FTIR) and Scanning Electron Microscope (SEM). The modified fabrics were rendered biocidal activities upon exposure to dilute hypochlorite solutions. The chlorinated cotton swatches were challenged with Staphylococcus aureus (ATCC 6538) and Escherichia coli O157:H7 (ATCC 43895) and exhibited excellent biocidal efficacy. The stability and rechargeability of the modified samples during washing and ultraviolet irradiation were also investigated. In vitro cell cytocompatibility studies demonstrated that the antibacterial cotton has good biocompatibility. Copyright © 2014 John Wiley & Sons, Ltd.     

Antibacterial cotton treated with N-halamine and quaternary ammonium salt

Quaternary ammonium salts and N-halamines are widely used as biocides in antimicrobial coatings, and have been extensively studied over the past two decades. In this work, 5,5-dimethyl-3-(3′-triethoxysilylpropyl)hydantoin (SPH), and 3-(trimethoxysilylpropyl) octadecyl dimethyl ammonium chloride (SPODA) were synthesized and coated onto cotton fibers using a pad-dry process (PD) and the traditional pad-dry-cure process (PDC). The coated cotton swatches were characterized by FT-IR and SEM. The quaternary ammonium salt showed a relatively lower inactivating bacteria efficacy than did the N-halamine compounds. The chlorinated swatches coated with both SPH and SPODA using the PD process could inactivate about 7 logs of the Staphylococci aureus within 5–10 min and 7 logs of Escherichia coli O157:H7 within 10–30 min, respectively. The addition of quats in N-halamine coatings improved antimicrobial activity against Gram-negative bacteria E. coli O157:H7. However, this result was not observed when the PDC process was applied in coatings because of the increasing hydrophobicity of the coated samples under high coating temperature.     

Do multi-use cellulosic textiles provide safe protection against the contamination of sterilized items?

The aim of this study was to determine whether multiple use cellulosic medical textiles (cotton blends, Tencel^®) could provide protection against contamination after sterilization, regardless of the barrier system of only qualified materials, as per EN 868-2, used in the process. New methods for testing permeability and durability of the microbial barrier cellulosic textiles were developed. The most resistant endospores of two apathogenic bacteria of the Bacilllus genus (Geobacillus stearothermophilus and Bacillus atrophaeus) were used. Testing was conducted after 1, 10, 20, 30 and 50 washing and sterilization cycles under real hospital conditions of the University Hospital Centre Zagreb. The retention period of the microbial barrier of the diagonally packaged packages (one layer; EN ISO 11607-1:2009) after sterilization was tested after the time period of 1, 2 and 3 months of storage under controlled conditions. Bacterial permeability occurred in cellulosic medical textiles when they were contaminated with an extremely high quantity of aerobe bacterial spores. During the testing of microbial barrier durability, the package remained uncontaminated after 1, 2 and 3 months of storage. Medical cellulose textiles used under real hospital conditions functioned properly as a microbial barrier system after 50 cycles of washing and sterilization and 3 months of storage, as the sterilized content was not contaminated at all; they could be used as a microbe barrier system for packing in sterilization, regardless of the fact that they did not meet the standard EN 868-02:2009 Packaging materials for terminally sterilized medical devices. Part 2: sterilization wrap—requirements and test methods or the International standard, for example EN ISO 11607-1:2009 Packaging for terminally sterilized medical devices, part 1: requirements for materials, sterile barrier systems and packaging systems.     

ICP-OES determination of metals present in textile materials

The aim of this work was to quantify the content of elements present in textile materials since it is known that textiles containing metals may represent a health hazard to consumers. Determination of metal content can be also useful to the textile industry since some metals present in textiles may contribute to problems during textile production. Extraction of metals from different textile materials was performed in an artificial acidic sweat solution according to the Öko Tex standard for materials coming into direct contact with the skin. After extraction from textile products made of cotton, flax, wool, silk, viscose, and polyester materials, all elements were determined by means of inductively coupled plasma-optical emission spectrometry (ICP-OES). Results in the sweat extracts (minimum-maximum in μg/mL) were: Al 0.11-1.58, Cd 0.02-0.05, Cr 0.01-0.32, Cu 0.05-1.95, Mn 0.01-2.17, and Ni 0.05-0.10. Concentrations of other elements were bellow detection limits. The total amount of metals present was determined after microwave assisted acidic digestion of textile materials with 7 M nitric acid. According to the results, the majority of the detected elements were below the concentration limits given by the Öko Tex, and for this reason the textile materials investigated do not represent a health hazard to consumers.     

In situ photoreduction of Ag+-ions by TiO2 nanoparticles deposited on cotton and cotton/PET fabrics

The possibility of in situ photoreduction of Ag⁺-ions using TiO₂ nanoparticles deposited on cotton and cotton/PET fabrics in the presence of amino acid alanine and methyl alcohol has been discussed. The possible interaction between TiO₂, alanine and Ag⁺-ions was evaluated by FTIR analysis. The fabrication of TiO₂/Ag nanoparticles on both fabrics was confirmed by SEM, EDX, XRD, XPS and AAS analyses. Cotton and cotton/PET fabrics impregnated with TiO₂/Ag nanoparticles provided maximum reduction of Gram-negative bacteria Escherichia coli and Gram-positive bacteria Staphylococcus aureus. Although excellent antibacterial activity was preserved after ten washing cycles, a significant amount of silver leached out from the fabrics into the washing bath. The perspiration fastness assessment revealed that smaller amounts of silver were also released from the fabrics into artificial sweat at pH 5.50 and 8.00. In addition, deposited TiO₂/Ag nanoparticles imparted maximum UV protection to fabrics.     

Reverse Thinking of the Aggregation-Induced Emission Principle: Amplifying Molecular Motions to Boost Photothermal Efficiency of Nanofibers**

Using reverse thinking of the aggregation-induced emission (AIE) principle, we demonstrate an ingenious and universal protocol for amplifying molecular motions to boost photothermal efficiency of fibers. Core–shell nanofibers having the olive oil solution of AIE-active molecules as the core surrounded by PVDF-HFP shell were constructed by coaxial electrospinning. The molecularly dissolved state of AIE-active molecules allows them to freely rotate and/or vibrate in nanofibers upon photoexcitation and thus significantly elevates the proportion of non-radiative energy dissipation, affording impressive heat-generating efficiency. Photothermal evaluation shows that the core–shell nanofibers with excellent durability can reach up to 22.36 % of photothermal conversion efficiency, which is 26-fold as the non-core–shell counterpart. Such a core–shell fiber can be used for photothermal textiles and solar steam generation induced by natural sunlight with green and carbon-zero emission.     

A novel approach for fixation of β-cyclodextrin on cotton fabrics

Cyclodextrins are cyclic oligosaccharides, which form complexes with different organic substances such as drugs, odors, and etc. Due to the complexing abilities of cyclodextrins (CDs), they may also be used in textile industry as an auxiliary in washing, dyeing, and wastewater treatment. Fixation of CDs on textiles is possible using reactive derivatives of cyclodextrins or crosslinking agents. In this study we have investigated the use of polyaminocarboxylic acids (PACAs) as novel crosslinking agents for the fixation of β-CD on cotton fabrics. Fixation of β-CD on cotton fabric has been quantified by measuring the weight increase of the treated samples. The influence of the concentration of the catalyst (sodium hypophosphite) was studied, too. The presence of β-CD on the cotton has been investigated by the phenolphthalein test and host–guest complexation with organic volatile molecules: cyclohexene, chlorobenzene, cyclohexene-1-one and toluene.     

Antimicrobial efficacy and light stability of N-halamine siloxanes bound to cotton

N-halamine silane syntheses and coatings of cotton fabrics as siloxanes were addressed for a series of silanes. The coated fabrics were chlorinated by exposure to dilute sodium hypochlorite with a range of chlorine loadings from 0.20% to 0.26%. Two types of N–Cl moieties were involved in the N-halamine siloxanes, amine and amide. The siloxane-coated cotton swatches were very effective in inactivating Escherichia coli O157:H7 and Staphylococcus aureus, each in 10 min contact time. The N–Cl bond and compound stabilities under UV irradiation and ambient light exposure were also investigated. Both UV and laboratory light stability tests show that most of the chlorine on cotton coated with 3-(3-triethoxysilylpropyl)-7,7,9,9-tetramethyl-1,3,8-triazaspiro[4.5]decane-2,4-dione could be regenerated after irradiation, while most of the lost chlorine from 5,5-dimethyl-3-(3′-triethoxysilylpropyl)hydantoin and 4-[3-triethoxysilylpropoxyl]-2,2,6,6-tetramethylpiperidine could not be recovered upon rechlorination.     

Epoxide tethering of polymeric <Emphasis Type="Italic">N</Emphasis>-halamine moieties

Three heterocyclic N-halamine structures containing amine, amide, or both functional groups were immobilized onto cotton fabric through epoxide tethering. The coatings were rendered biocidal upon exposure to dilute household bleach solution. The coatings exhibited superior biocidal functionality with complete inactivation of about 6 logs of Staphylococcus aureus and Escherichia coli O157:H7 within 2–10 min contact time depending on the structure. Moreover, the coatings were quite stable against repeated laundering so that recharging was not even necessary after 50 washing cycles. Stability of the coatings against ultraviolet light exposure was studied with a comparison of the amide- and amine-containing N-halamines.     

Antibiotic protected silver nanoparticles for microbicidal cotton

Surface coating of metal nanoparticles is one of the major aspects to be optimized in the design of antimicrobial nanoparticles. The novelty of this work is that antimicrobial derivatives have been used as stabilizers to protect silver nanoparticles (Ag NPs). Microbicidal activity studies of fabricated cotton textiles coated with these Ag@Antibio were performed. Protective ligand layers of Ag NPs resulted to be a deterministic factor in their antimicrobial activity. The best bactericidal activity was obtained for Fabric TAM (coated with Ag NPs with triarylmethane derivates in surface, Ag@TAMSH), with a bacterial decrease of 3 log units for the S. aureus strain. Intrinsic antibiotic activity and partial positive charge of the TAMSH probably enhanced their antimicrobial effects. Fabric Eu (coated with Ag NPs with eugenol derivates in surface, Ag@EugenolSH) and Fabric FQPEG (coated with Ag NPs embedded in PEG-fluoroquinolone derivatives in surface, Ag@FQPEG) displayed antibacterial activity for both Staphylococcus aureus and Pseudomonas aeruginosa strains. These coated antimicrobial cotton fabrics can be applied in different medical textiles.