Synthesis,Characterization and Properties of Single-Walled Carbon Nanohorns

Single-walled nanohorns (SWNHs) have been prepared by sub-merged arc discharge of graphite electrodes in liquid nitrogen. The samples were examined by scanning electron microscopy, transmission electron microscopy and Raman spectroscopy. Nitrogen and boron doped SWNHs have been prepared by the sub-merged arc discharge method using melamine and elemental boron as precursors. Intensification of Raman D-band and stiffening of G-band has been observed in the doped samples. The electrical resistance of the SWNHs varies in opposite directions with nitrogen and boron doping. Functionalization of SWNHs through amidation has been carried out for solubilizing them in non-polar solvents. Water-soluble SWNHs have been produced by acid treatment and non-covalent functionalization with a coronene salt. SWNHs have been decorated with nanoparticles of Au, Ag and Pt. Interaction of electron donor (tetrathiafulvalene, TTF) and acceptor molecules (tetracyanoethylene, TCNE) with SWNHs has been investigated by Raman spectroscopy. Progressive softening and stiffening of Raman G-band has been observed respectively with increase in the concentration of TTF and TCNE.     

不同银膜粒径对单壁碳纳米管SERS谱的影响

利用化学沉积法和溶胶法制备了粒径在20～100nm范围内不同的表面增强纳米结构活性银膜,系统地研究了单壁碳纳米管（SWCNT）的表面增强拉曼光谱（SERS）的G—band和D—band、比较玻璃和石英两种不同基片上的结果发现,单壁碳管的SERS谱随银膜粒径的变化有相同的变化趋势,G-band峰移对20～100nm范围内活性银膜粒径的差异不敏感,表明该波段所对应的碳管六元环本征振动比较稳定,与界面的化学相互作用较弱．D—band的峰形随基片和活性银膜粒径不同均有改变,且随着粒径变小,高频振动贡献有增大的趋势,表明无序碳与活性银膜间存在很强的相互作用。     

Maturation grade of coals as revealed by Raman spectroscopy: progress and problems

The present study questions the sensitivity and the accuracy of Raman spectroscopy as a tool for determining the maturity of natural organic matter (NOM). It focuses on the definition of optimized experimental parameters in order to maximize the quality of the Raman signal and control the accuracy and reproducibility of measurements. A series of 11 coals has been investigated, sampling a wide maturity range (2-7% vitrinite reflectance VR). The role of experimental parameters is first investigated. An excitation wavelength of 514.5 nm gives better results than 457.9 and 632.8 nm, minimizing the fluorescence background observed in the spectra of low-rank coals. Both Raman and fluorescence spectra were investigated with time-resolved experiments in air and argon. These data show that fluorescence and Raman spectra are sensitive to acquisition time and laser power parameters, and reveal a physicochemical instability of the samples under laser irradiation, mostly due to photo-oxidation processes. These data clearly show that the experiments, especially in air, should be performed with strictly constant acquisition parameters. In addition, the results of a whole series of coal measurements performed in air under constant experimental conditions show that Raman spectroscopy is definitely sensitive to the maturity of coal samples with VR> approximately 1%. The most sensitive spectral maturity tracers are the width of the D-band (FWHM-D), the ratio of the peak intensities of the D- and G-bands (I(D)/I(G)), the normalized ratio of the band integrated intensities A(D)/[A(D)+A(G)] for the maturity range VR=3-7% and the width of the G-band (FWHM-G) for VR=1-5%. However, the accuracy and reproducibility are definitely weaker in such measurements compared to the standard VR. Future work must solve the problem of sample stability under laser irradiation, and greatly increase the number of samples to improve the statistical significance of the results.     

Effects of substrate and transfer on CVD-grown graphene over sapphire-induced Cu films

We differentiated the effects of Cu films deposited on single crystalline a-,r-,and c-plane sapphire substrates upon graphene films synthesized with atmospheric pressure chemical vapor deposition(CVD).The data illustrate that the realization of high-crystalline Cu film is dependent not only on the crystallinity of underlying substrate,but also on the symmetric match of crystallographic geometry between metal film and substrate.We also systematically investigated the effects of PMMA removal on the Raman ID/IG and IG/I2D values of transferred graphene.The results reveal that different PMMA removal methods do not alter the ID/IG values;instead,the residue of PMMA increases the IG/I2D values and the thermal decomposition of PMMA leads to higher IG/I2D values than the removal of PMMA with acetone.The effects of PMMA removal on variations of the Raman spectra are also discussed.     

Studying disorder in graphite-based systems by Raman spectroscopy

Raman spectroscopy has historically played an important role in the structural characterization of graphitic materials, in particular providing valuable information about defects, stacking of the graphene layers and the finite sizes of the crystallites parallel and perpendicular to the hexagonal axis. Here we review the defect-induced Raman spectra of graphitic materials from both experimental and theoretical standpoints and we present recent Raman results on nanographites and graphenes. The disorder-induced D and D' Raman features, as well as the G'-band (the overtone of the D-band which is always observed in defect-free samples), are discussed in terms of the double-resonance (DR) Raman process, involving phonons within the interior of the 1st Brillouin zone of graphite and defects. In this review, experimental results for the D, D' and G' bands obtained with different laser lines, and in samples with different crystallite sizes and different types of defects are presented and discussed. We also present recent advances that made possible the development of Raman scattering as a tool for very accurate structural analysis of nano-graphite, with the establishment of an empirical formula for the in- and out-of-plane crystalline size and even fancier Raman-based information, such as for the atomic structure at graphite edges, and the identification of single versus multi-graphene layers. Once established, this knowledge provides a powerful machinery to understand newer forms of sp(2) carbon materials, such as the recently developed pitch-based graphitic foams. Results for the calculated Raman intensity of the disorder-induced D-band in graphitic materials as a function of both the excitation laser energy (E(laser)) and the in-plane size (L(a)) of nano-graphites are presented and compared with experimental results. The status of this research area is assessed, and opportunities for future work are identified.     

Active sites of the functionalized coals and carbons for oxygen reduction reaction in a fuel cell

The active sites of the coals and carbons functionalized with added nitrogen, oxygen and iron were studied for the oxygen reduction reaction (ORR) in a fuel cell. The catalysts were characterized based on the XPS, Raman, TEM, XRD and N₂ adsorption measurements. The ORR activity was promoted by the addition of iron and aluminum as the inorganic components of the ash to the ash-free brown coal. The ORR activity of the ash-components added to the ash-free brown coal was correlated to the I _D/I _G ratio (deficient carbon degree) and the pyridinic nitrogen based on the Raman and XPS analyses, respectively. The active sites of the brown coal were formed at the pyridinic nitrogen on parts of the defective carbons associated with iron on the alumina. On the other hand, for the nitrogen-doped carbons without iron, the ORR activity was related to the pyrrolic-NH, pyridinic nitrogen species and the defective carbon degree. Based on these results, the active sites of the iron-added and nitrogen-doped coals and carbons were the iron sites coordinated with the pyridinic nitrogen, while the active sites of the iron-free and nitrogen-doped carbons without iron were the pyrrolic-NH and pyridinic-NH⁺ sites of parts of the defective carbons. The difference between the active sites of the nitrogen-doped coals and carbons in the presence of iron and those in the absence of iron was discussed. These results suggested that the pyridinic N as a base site transformed into pyridinic-NH⁺ as an acid site by attack of the proton from the anode.     

Effects of supercritical CO2 exposure on diffusion and adsorption kinetics of CH4, CO2 and water vapor in various rank coals

The physico-chemical effects caused by supercritical CO₂ (ScCO₂) exposure is one of the leading problems for CO₂ storage in deep coal seams as it will significantly alter the flow behaviors of gases. The main objective of this study was to investigate the effects of ScCO₂ injection on diffusion and adsorption kinetics of CH₄, CO₂ and water vapor in various rank coals. The powdered coal samples were immersed in ScCO₂ for 30 days using a high-pressure sealed reactor. Then, the diffusion and adsorption kinetics of CH₄, CO₂ and water vapor in the coals both before and after exposure were examined. Results indicate that the diffusivities of CH₄ and CO₂ are significantly increased due to the combined matrix swelling and solvent effect caused by ScCO₂ exposure, which may induce secondary faults and remove some volatile matters that block the pore throats. On the other hand, the diffusivities of water vapor are reduced due to the elimination of surface functional groups with ScCO₂ exposure. It is concluded that density of the surface function groups is the controlling factor for water vapor diffusion rather than the pore properties. The unipore model and pseudo-first-order equation can simulate the diffusion and adsorption kinetics of CH₄ and CO₂ very well, but the unipore model is not capable of well describing water vapor diffusion. The effective diffusivity (D_e), diffusion coefficient (D) and adsorption rates (k₁) of CH₄ and CO₂ are significantly increased after ScCO₂ exposure, while the values of water vapor are decreased notably. Thus, the injection of ScCO₂ will efficiently improve the transport properties of CH₄ and CO₂ but hinder the movement of water molecules in coal seams.     

Distribution and source identification of dissolved sulfate by dual isotopes in waters of the Babu subterranean river basin,SW China

Sulfur and oxygen isotopes were employed to identify SO₄ ^2? sources in surface water and groundwater in the Babu subterranean river basin (BSRB). Our study revealed SO₄ ^2? enrichment in the BSRB waters compared with adjacent areas. The SO₄ ^2? in some samples originated mainly from precipitation; in others, it was derived mainly from sulfide dissolution in coal seams or from gypsum dissolution. In the water at the subterranean river exit, 13% of SO₄ ^2? originated from precipitation, 40% from sulfide oxidation in coal seams, and 47% from gypsum dissolution.     

Fe对胜利褐煤焦结构和气化反应性能的影响

酸洗褐煤负载不同含量的Fe催化剂在固定床反应器上进行热解,然后采用FT-IR、Raman spectra、TPD和TG研究Fe催化剂对煤焦官能团、碳微晶结构、表面活性位和气化反应性的影响。FT-IR结果表明,催化热解作用下煤焦中-OH、-CH₃、-CH₂活性官能团数量增加。Raman光谱测试结果显示,随着Fe含量的增加,I_G/I_all由0.095减少到0.087,I_D3/I_all由0.090增加至0.097,表明在Fe催化作用下部分大芳香环结构转变为小芳香环结构。TPD实验结果表明,活性位数量随着煤焦中Fe含量升高而不断增加。在3%含Fe量时煤焦活性位数量随着吸附温度的升高而增加,800 ℃后煤焦表面活性位数量开始降低。750 ℃条件下CO₂吸附量随着吸附时间的延长而增加,45 min后煤焦达到饱和吸附状态。煤焦-水蒸气等温气化实验表明,煤焦气化反应性与活性位数量有密切的关系,Fe催化剂主要通过增加煤焦表面活性位数量提高煤焦气化反应性。     

双相碳改性硅酸铁锂正极材料研究

以活化的天然石墨为碳源,采用固相辅助回流法成功合成了双相碳改性的Li₂FeSiO₄复合材料。采用XRD、SEM、HRTEM和Raman光谱分析了Li₂FeSiO₄/(C+G)复合材料的物相、形貌及其微观结构;并研究了活化石墨用量对Li₂FeSiO₄/(C+G)复合材料的电化学性能的影响。结果表明：活化石墨以石墨微晶和无定形碳的形态共存于Li₂FeSiO₄/(C+G)材料中,活化石墨用量为5%时所得样品的首次放电容量较高(170.3mAh·g^-1),循环50次后其容量保持率为88.7%,表现出了良好的电化学性能。     

Carbonization and graphitization of pitch applied for anode materials of high power lithium ion batteries

The artificial graphite materials were prepared by carbonizing coal tar pitch using two methods, namely, one- and two-step processes, and all sintered samples were graphitized at 2800 °C. Effects of different heat treatments on the performance of the samples were characterized by scanning electron microscopy, transmission electron microscopy (TEM), X-ray diffraction, Brunauer–Emmett–Teller, electrochemical impedance spectroscopy (EIS), particle size analysis, polarized light microscopy, and charge–discharge measurements. All samples show a typical graphite crystalline structure; moreover, the degree of graphitization (g factor) and crystallite size along the c-axis (L _c ) were calculated from (002) peak. The polarized light microscopy indicates that the coke with carbonization at 700 °C has an obvious wide domain (D) optical structure, while that with two-step sintering at 400 and 700 °C has a mixed optical structures of wide D, flow domains, and mosaics. TEM analysis revealed a number of irregular graphene layer images which are caused by the defects of graphite. EIS shows that the sample carbonized by two-step has a larger diffusion coefficient than the sample carbonized at 700 °C by one step. Higher carbonization temperature leads to better cycle performance as the temperature increasing from 500 to 700 °C in the one-step route. Specifically, the charge (Li⁺ extraction) capacity at the 50th cycle increases from 318 mA?h?g^?1 to 357 mA?h?g^?1. The results show that the rate performance of the artificial graphite is improved with the addition of the presintering at 400 °C.     

Laser light scattering of the molecular weight distribution of unfractionated phenolphthalein poly(aryl ether sulfone)

Two unfractionated samples of phenolphthalein poly(aryl ether sulfone) (PES-C) were characterized in CHCl₃ at 25°C by applying a recently developed laser light-scattering (LLS) procedure. The Laplace inversion of precisely measured intensity–intensity time correlation function lead us first to an estimate of the characteristic line-width distribution G(Λ) and then to the translational diffusion coefficient distribution G(D). A combination of static and dynamic LLS results enabled us to determine D = (2.69 × 10⁻⁴)M^−0.553, which agrees with the calibration of D = (2.45 × 10⁻⁴)M^−0.55 previously established by a set of narrowly distributed PES-C samples. Using this newly obtained scaling between D and M, we were able to convert G(D) into a differential weight distribution f_w(M) for the two PES-C samples. The weight-average molecular weights calculated from f_w(M) are comparable to that obtained directly from static LLS. Our results showed that using two broadly distributed samples instead of a set of narrowly distributed samples have provided not only similar final results, but also a more practical method for the PES-C characterization. © 1997 John Wiley & Sons, Inc.     

Sorption charateristics of methane among various rank coals: impact of moisture

Enhanced coalbed methane (ECBM) in deep coal seams is being actively investigated around the world. Since the in situ coal seams are always saturated with water, methane sorption behavior on coal in the presence of water can help accurately assess the amount of recoverable methane. Thus, methane sorption isotherms have been measured on a high-rank anthracite, a low-volatile bituminous, a middle-volatile bituminous and a high-volatile bituminous coal with the manometric technology at 30 °C under six different moisture contents. The Dubinin–Astakhov (D–A) equation was used to fit the experimental sorption isotherm data. In all cases, the moisturized coals exhibited lower sorption capacity than the corresponding dry materials and moisture has a significant effect on CH₄ sorption capacity. The maximum sorption capacity, V ₀, displays a linear decline with the moisture content for the Changcun and Malan samples, but it is nonlinear for the other two coal samples. The net heat of CH₄ sorption, βE, is also reduced by the presence of water, but varies only slightly between a relatively small span of about 8.8 and 10.0 kJ mol^?1 for the dry samples studied, despite the difference in coal rank. In addition, the maximum sorption capacity of CH₄ in dry coals presents the typical “U-shape” trend with coal rank. Moisture has a greater impact on the sorption capacity in low-rank coals than that in high-rank coals. The mechanisms responsible for the effect of moisture on CH₄ sorption among various rank coals are also presented. The pore-blocking effect is the main influencing factor for high-rank anthracite, whereas, the competition sorption is dominant for low-rank coals.     

双相碳改性硅酸铁锂正极材料研究

以活化的天然石墨为碳源,采用固相辅助回流法成功合成了双相碳改性的Li2FeSiO4复合材料。采用XRD、SEM、HRTEM和Raman光谱分析了Li2FeSiO4/(C+G)复合材料的物相、形貌及其微观结构;并研究了活化石墨用量对Li2FeSiO4/(C+G)复合材料的电化学性能的影响。结果表明:活化石墨以石墨微晶和无定形碳的形态共存于Li2FeSiO4/(C+G)材料中,活化石墨用量为5%时所得样品的首次放电容量较高(170.3 mAh·g-1),循环50次后其容量保持率为88.7%,表现出了良好的电化学性能。     

低阶煤热萃取物与瘦煤共炭化焦炭的微观结构及显微强度研究

以众唯瘦煤作为主炼焦煤,大同长焰煤萃取物作为添加剂,进行共炭化处理制备坩埚焦。利用偏光显微镜法定量研究焦炭光学显微组分,获得焦炭的各向异性指数(DRAS);采用XRD及分峰拟合的方法研究了焦炭的微晶粒径(L_c)、芳香缩合度(I_a)、石墨化度(g);利用Raman光谱结合分峰拟合的方法研究了焦炭中理想石墨微晶含量(I_g)。对所得焦炭的光学显微组分进行定量分析发现:大同长焰煤热解萃取产物的添加对共炭化焦炭的光学显微组分有显著的影响,利用偏光显微镜法计算出焦炭的DRAS与XRD和Raman计算的焦炭微晶参数呈现很好一致性。并且,焦炭的显微强度与其微观结构关联性极大。     

Carboxylic acid-assisted solid-state synthesis of LiFePO4/C composites and their electrochemical properties as cathode materials for lithium-ion batteries

To enhance the capability of LiFePO₄ materials, we attempted to coat carbon by incorporating various organic carboxylic acids as carbon sources. The purity of LiFePO₄ was confirmed by XRD analysis. Galvanostatic cycling, cyclic voltammetry, electric impedance spectroscopy, and conductivity measurements were used to evaluate the material’s electrochemical performance. The best cell performance was delivered by the sample coated with 60 wt.% malonic acid. Its first-cycle discharge capacity was 149 mA h g^?1 at a 0.2 C rate or 155 mA h g^?1 at a 0.1 C rate. The presence of carbon in the composite was verified by total organic carbon and Raman spectral analysis. The actual carbon content of LiFePO₄ was 1.90 wt.% with the addition of 60 wt.% malonic acid. The LiFePO₄/C samples sintered with 60 wt.% various carboxylic acids were measured by Raman spectral analysis. The intense broad bands at 1,350 and 1,580 cm^?1 are assigned to the D and G bands of residual carbon in LiFePO₄/C composites, respectively. The peak intensity (I _D/I _G) ratio of the synthesized powders is from 0.907 to 0.935. Carbon coatings of LiFePO₄ with low I _D/I _G ratios can be produced by incorporating carboxylic acid additives before the final calcining process. The use of carboxylic acid as a carbon source increases the overall conductivity (～10^?4 S cm^?1) of the material.     

Aggregate morphology and flow behaviour of micellar alkylglycoside solutions

Solutions of n-nonyl-β-D-glucoside (C₉G₁), n-decyl-β-D-glucoside (C₁₀G₁), n-dodecyl-β-D-maltoside (C₁₂G₂), n-tetradecyl-β-D-maltoside (C₁₄G₂) and C₉G₁/C₁₀G₁ mixtures have been characterised by capillary viscometry and rheology in H₂O and D₂O, in order to map the influence of surfactant characteristics on micellisation over a wide concentration range. For the maltosides, the micellar solutions are shear thinning with a zero-shear viscosity that scales with concentration according to a power law with an exponent of about 5.8. In contrast, solutions of the glucosides C₉G₁, C₁₀G₁ and their mixtures show Newtonian flow behaviour and a much lower scaling exponent (<2.4). In C₉G₁/C₁₀G₁ mixtures, the scaling exponent decreases monotonously with increasing C₁₀G₁ content. The flow behaviour correlates with the packing requirements of the various surfactants, and are compatible with the idea that the maltosides form worm-like micelles, whereas the glucosides form branched, interconnected micelles (C₉G₁) and space-filling micellar networks (C₁₀G₁).     

Hydrothermal Microwave Synthesis of MnO<Subscript>2</Subscript> in the Presence of Melamine: The Role of Temperature and pH

Nanocrystalline manganese dioxide have been prepared by hydrothermal microwave treatment of mixed solutions of potassium permanganate and 2,4,6-triamino-1,3,5-triazine (melamine) in pH range 0.5–3. Phase and chemical composition and morphology of the samples was studied by XRD, Raman spectroscopy, and SEM. Conditions (solution pH and temperature) for the formation of single phase MnO₂ powders (α-MnO₂, γ-MnO₂, δ-MnO₂, and δ*-MnO₂) under hydrothermal microwave treatment were determined.     

Raman spectra of carriers in ionic-liquid-gated transistors fabricated with poly(2,5-bis(3-tetradecylthiophen-2-yl)thieno[3,2-b]thiophene)

We observed the Raman spectra of carriers, positive polarons and bipolarons, generated in a poly(2,5-bis(3-tetradecylthiophen-2-yl)thieno[3,2-b]thiophene) (PBTTT-C14) film by FeCl₃ vapor doping. Electrical conductivity and Raman measurements indicate that the dominant carriers in the conducting state were bipolarons. We identified positive polarons and bipolarons generated in an ionic-liquid-gated transistor (ILGT) fabricated with PBTTT-C14 as an active semiconductor and an ionic liquid 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl) imide [BMIM][TFSI] as a gate dielectric using Raman spectroscopy. The relationship between the source−drain current (I_D) at a constant source−drain voltage (V_D) and the gate voltage (V_G) was measured. I_D increased above −V_G = 1.1 V and showed a maximum at −V_G = 2.0 V. Positive polarons were formed at the initial stage of electrochemical doping (−V_G = 0.8 V). As I_D increased, positive bipolarons were formed. Above V_G = −2.0 V, bipolarons were dominant. The charge density (n), the doping level (x), and the mobility of the bipolarons were calculated from the electrochemical measurements. The highest mobility (μ) of bipolarons was 0.72 cm² V⁻¹ s⁻¹ at x = 110 mol%/repeating unit (−V_G = 2.0 V), whereas the highest μ of polarons was 4.6 × 10⁻⁴ cm² V⁻¹ s⁻¹ at x = 10 mol%.     

Strahlungschemie von Kohlenwasserstoffen. 19. Mitteilung. Die Deuteriumabspaltung in isotop-isomeren Cyclohexanen

The G-value for D₂ production has been measured for C₆D₁₂ and for gem-, cis-, and trans-C₆H₁₀D₂. The G-values for the unimolecular process are 0.24, 0.023, 0.010 and 0.004, resp. In C₆D₁₂ two bimolecular processes can be distinguished: one includes ‘hot’ D-atoms, e. g. a species that shows no isotope effect for the hydrogen abstraction yielding D₂ and HD, resp.; its G-value is 1.22. The other process goes via thermal D-atoms, it has a G-value of 1.97 and gives an isotope effect for abstraction: k_D/k_H = 0.075 (10°C). In the partially deuteriated cyclohexanes, only the former process can be observed. Its G-value depends on the irradiation temperature and phase, is independent of the position of the D-atoms in the molecule and amounts to 0.035 (10°C), 0.028 (?40°C solid), 0.040 (?40°C liquid with 25% hexane). The following conclusions can be drawn: the unimolecular detachment shows no intramolecular isotope effect in partially deuteriated molecules and comes only from the gem-, cis- and trans-positions. Most of the G-values for the D₂ and HD production by different reaction paths can be cross-checked by G-values from different mixtures. The agreement between these values is excellent.