Isomerization of cyclopropane to propylene in shock waves

Cyclopropane mixtures diluted with argon were heated to temperatures in the range 1100–1450 K behind incident and reflected shock waves. The rate of isomerization of cyclopropane to propylene was measured by tracing the time variation of absorption at 3.39 μm. The rate constant expression k = 4.60 × 10¹⁴ exp (−62.5 kcal/RT) s⁻¹ was determined, in accord with extrapolation from lower-temperature experiments.     

The rate constants of the elementary reactions of NH3 with O and OH

Two sets of discordant rate constants reported recently for the high-temperature reactions of NH₃ with O and OH were examined by comparing the calculated concentration profiles of NH₃ and OH with experiments by the shock tube technique forNH₃-N₂O-Ar mixtures. The rate constants were confirmed tobe: k₄ = 3.1 × 10¹²exp(−25.5 kJ/RT) cm³ mol⁻¹ s⁻¹ for NH₃ + O → NH₂ + OH and k₅ = 3.2×10¹² exp(−8.4 kJ/RT) for NH₃ + OH → NH₂ + H₂O.     

Thermal decomposition of vinylacetylene in shock waves: Rate constant of initiation reaction

The thermal decomposition of vinylacetylene was studied behind incident shock waves over the temperature range 1200–1750 K and over the pressure range 0.3–0.6 atm by tracing the time variation of absorption at 230 nm. The initiation reaction and the rate constant in the thermal decomposition of vinylacetylene were determined from the initial slope of the absorption curve as C₄H₄ → h₁, C₄H₃+H, k₁ = 6.1 × 10¹³ exp (−80 kcal/RT) s⁻¹.     

Theoretical and experimental studies of the diketene system: Product branching decomposition rate constants and energetics of isomers

The kinetics and mechanism for the thermal decomposition of diketene have been studied in the temperature range 510–603 K using highly diluted mixtures with Ar as a diluent. The concentrations of diketene, ketene, and CO₂ were measured by FTIR spectrometry using calibrated standard mixtures. Two reaction channels were identified. The rate constants for the formation of ketene (k₁) and CO₂ (k₂) have been determined and compared with the values predicted by the Rice–Ramsperger–Kassel–Marcus (RRKM) theory for the branching reaction. The first-order rate constants, k₁ (s⁻¹) = 10^{15.74 ± 0.72} exp(−49.29 (kcal mol⁻¹) (±1.84)/RT) and k₂ (s⁻¹) = 10^{14.65 ± 0.87} exp(−49.01 (kcal mol⁻¹) (±2.22)/RT); the bulk of experimental data agree well with predicted results. The heats of formation of ketene, diketene, cyclobuta-1,3-dione, and cyclobuta-1,2-dione at 298 K computed from the G2M scheme are −11.1, −45.3, −43.6, and −40.3 kcal mol⁻¹, respectively. © 2007 Wiley Periodicals, Inc. Int J Chem Kinet 39: 580–590, 2007     

Gel permeation chromatographic determination of activation rate constants in nitroxide-controlled free radical polymerization, 1. Direct analysis by peak resolution

The dissociation rate constant k_d related to the homolytic cleavage of the C ON bond formed between a polystyrene (PS) and 2,2,6,6-tetramethylpiperidin-1-oxyl (TEMPO) is determined by adopting the gel permeation chromatography peak-resolution method to the styrene polymerization with a PS-TEMPO adduct as a probe and the radical initiator tert-butyl hydroperoxide. The result was given by the Arrhenius equation, k_d = A exp(−E/(RT)) with A = 3.0 × 10¹³ s⁻¹ and E = 124 kJ · mol⁻¹.     

Temperature dependence of the rate coefficients for the reaction of chlorine atoms with chloromethanes

Rate coefficients for the reaction of Cl atoms with CH₃Cl (k₁), CH₂Cl₂ (k₂), and CHCl₃ (k₃) have been determined over the temperature range 222–298 K using standard relative rate techniques. These data, when combined with evaluated data from previous studies, lead to the following Arrhenius expressions (all in units of cm³ molecule⁻¹ s⁻¹): k₁ = (2.8 ± 0.3) × 10⁻¹¹ exp(−1200 ± 150/T); k₂ = (1.5 ± 0.2) × 10⁻¹¹ exp(−1100 ± 150/T); k₃ = (0.48 ± 0.05) × 10⁻¹¹ exp(−1050 ± 150/T). Values for k₁ are in substantial agreement with previous measurements. However, while the room temperature values for k₂ and k₃ agree with most previous data, the activation energies for these rate coefficients are substantially lower than previously recommended values. In addition, the mechanism of the oxidation of CH₂Cl₂ has been studied. The dominant fate of the CHCl₂O radical is decomposition via Cl‐atom elimination, even at the lowest temperatures studied in this work (218 K). However, a small fraction of the CHCl₂O radicals are shown to react with O₂ at low temperatures. Using an estimated value for the rate coefficient of the reaction of CHCl₂O with O₂ (1 × 10⁻¹⁴ cm³ molecule⁻¹ s⁻¹), the decomposition rate coefficient for CHCl₂O is found to be about 4 × 10⁶ s⁻¹ at 218 K, with the barrier to its decomposition estimated at 6 kcal/mole. As part of this work, the rate coefficient for Cl atoms with HCOCl was also been determined, k₇ = 1.4 × 10⁻¹¹ exp(−885/T) cm³ molecule⁻¹ s⁻¹, in agreement with previous determinations. © 1999 John Wiley & Sons, Inc. Int J Chem Kinet 31: 515–524, 1999     

Thermal decomposition of N2O near 900 K studied by FTIR spectrometry: Comparison of experimental and theoretical O(3P) formation kinetics

The spin-forbidden dissociation reaction of the N₂O(X¹Σ⁺) ground state has been investigated by both quantum calculations and experiments. Ab initio prediction at the CCSD(T)/CBS(TQ5)//CCSD(T)/aug-cc-pVTZ+d level of theory gave the crossing point (MSX) energy at 60.1 kcal/mol for the N₂O(X¹Σ⁺) → N₂() + O(³P) transition, in good agreement with published data. The T- and P-dependent rate coefficients, k₁(T,P), for the nonadiabatic thermal dissociation predicted by nonadiabatic Rice-Ramsperger-Kassel-Marcus (RRKM) calculations agree very well with literature data. The rate constants at the high- and low-pressure limits, k₁^∞ = 10^11.90 exp (−61.54 kcal mol⁻¹/RT) s⁻¹ and k₁^o = 10^14.97 exp(−60.05 kcal mol⁻¹/RT) cm³ mol⁻¹ s⁻¹, for example, agree closely with the extrapolated results of Röhrig et al. at both pressure limits. The second-order rate constant (k₁^o) is also in excellent agreement with our result measured by FTIR spectrometry in the present study for the temperature range of 860-1023 K as well as with many existing high-temperature data obtained primarily by shock-wave heating up to 3340 K. Kinetic modeling of the NO product yields measured at long reaction times in the present work also allowed us to reliably estimate the rate constant for reaction (3), O + N₂O → N₂ + O₂, based on its strong competition with the NO formation from reaction (2) which has been better established. The modeled values of k₃ confirmed the previous finding by Davidson et al. with significantly smaller values of A-factor and activation energy than the accepted ones. A least-squares analysis of both sets of data gave k₃ = 10^{12.22 ± 0.04} exp[− (11.65 ± 0.24 kcal mol⁻¹/RT)] cm³ mol⁻¹ s⁻¹, covering the wide temperature range of 988-3340 K.     

High‐Temperature Rate Constants for H + Tetramethylsilane and H + Silane and Implications about Structure–Activity Relationships for Silanes

The shock‐tube technique has been used to investigate the reactions H + SiH₄ → H₂ + SiH₃ (R1) and H + Si(CH₃)₄ → Si(CH₃)₃CH₂ + H₂ (R2) behind reflected shock waves. C₂H₅I was used as a thermal in situ source for H atoms. For reaction (R1), the experiments covered a temperature range of 1170–1251 K and for (R2) 1227–1320 K. In both cases, the pressures were near 1.5 bar. In these experiments, H atoms were monitored with atomic resonance absorption spectrometry. Fits to the H‐atom temporal concentration profiles applying postulated chemical kinetic reaction mechanisms were used for determining the rate constants k₁ and k₂. Experimental rate constants were well represented by the Arrhenius equations k₁(T) = 2.75 × 10⁻⁹ exp(−37.78 kJ mol⁻¹/RT) cm³ s⁻¹ and k₂(T) = 1.17 × 10⁻⁷ exp(−86.82 kJ mol⁻¹/RT) cm³ s⁻¹. Transition state theory (TST) calculations based on CBS‐QB3 and G4 levels of theory show good agreement with experimentally obtained rate constants; the experimental values for k₁ and k₂ are ∼40% lower and ∼50% larger than theoretical predictions, respectively. For the development of a mechanism describing the thermal decomposition of tetramethylsilane (Si(CH₃)₄; TMS), also TST‐based rate constants for reaction CH₃ + Si(CH₃)₄ → Si(CH₃)₃CH₂ + CH₄ (R3) were calculated. A comparison between experimental and theoretical rate constants k₂ and k₃ with available rate constants from the literature indicates that Si(CH₃)₄ has very similar reactivity toward H abstractions like neopentane (C(CH₃)₄), which is the analog hydrocarbon to TMS. Based on these results, the possibility of drawing reactivity analogies between hydrocarbons and structurally similar silicon‐organic compounds for H‐atom abstractions is discussed.     

Absolute rate constants for the reaction of O(3P) aroms with n-butane and NO(M  Ar) over the temperature range 298–439 K

Absolute rate constants for the reaction of O(³P) atoms with n-butane (k₂) and NO(M  Ar)(k₃) have been determined over the temperature range 298–439 K using a flash photolysis-NO₂ chemiluminescence technique. The Arrhenius expressions obtained were k₂ = 2.5 × 10^?11exp[-(4170 ± 300)/RT] cm³ molecule^?1 s^?1, k₃ = 1.46 × 10^?32 exp[940 ± 200)/ RT] cm⁶ molecule^?2 s^?1, with rate constants at room temperature of k₂ = (2.2 ± 0.4) × 10^?14 cm³ molecule^?1 s^?1 and k₃ = (7.04 ± 0.70)×10^?32 cm⁶ molecule^?2 s^?1. These rate constants are compared and discussed with literature values.     

A detailed chemical kinetic model for high temperature ethanol oxidation

A detailed chemical kinetic model for ethanol oxidation has been developed and validated against a variety of experimental data sets. Laminar flame speed data (obtained from a constant volume bomb and counterflow twin‐flame), ignition delay data behind a reflected shock wave, and ethanol oxidation product profiles from a jet‐stirred and turbulent flow reactor were used in this computational study. Good agreement was found in modeling of the data sets obtained from the five different experimental systems. The computational results show that high temperature ethanol oxidation exhibits strong sensitivity to the fall‐off kinetics of ethanol decomposition, branching ratio selection for C₂H₅OH + OH ↔ Products, and reactions involving the hydroperoxyl (HO₂) radical. The multichanneled ethanol decomposition process is analyzed by RRKM/Master Equation theory, and the results are compared with those obtained from earlier studies. The ten‐parameter Troe form is used to define the C₂H₅OH(+M) ↔ CH₃ + CH₂OH(+M) rate expression as k^∞ = 5.94E23 T^−1.68 exp(−45880 K/T) (s⁻¹) k^o = 2.88E85 T^−18.9 exp(−55317 K/T) (cm³/mol/sec) F_cent = 0.5 exp(−T/200 K) + 0.5 exp(−T/890 K) + exp(−4600 K/T) and the C₂H₅OH(+M) ↔ C₂H₄ + H₂O(+M) rate expression as k^∞ = 2.79E13 T^0.09 exp(−33284 K/T) (s⁻¹) k^o = 2.57E83 T^−18.85 exp(−43509 K/T) (cm³/mol/sec) F _cent = 0.3 exp(−T/350 K) + 0.7 exp(−T/800 K) + exp(−3800 K/T) with an applied energy transfer per collision value of <ΔE_down> = 500 cm⁻¹. An empirical branching ratio estimation procedure is presented which determines the temperature dependent branching ratios of the three distinct sites of hydrogen abstraction from ethanol. The calculated branching ratios for C₂H₅OH + OH, C₂H₅OH + O, C₂H₅OH + H, and C₂H₅OH + CH₃ are compared to experimental data. © 1999 John Wiley & Sons, Inc. Int J Chem Kinet 31: 183–220, 1999     

Rate constants of elementary reactions in the high temperature system of nitric oxide and hydrogen

The consumption of nitric oxide in the shock-heated nitric oxide, hydrogen, and argon system had been studied and modeled as the chain-branching process containing the reaction H + NO ? N + OH (k₃) as a slow-branching step. Through the computer simulation method the authors clarified the role of the initiation reaction H₂ + NO ? HNO + H (k₁) in the system and obtained the rate constants of k₁ and k₃ as k₁ = 10^13.5±0.15 exp (?55.2 kcal/RT) and k₃ = 10^13.7±0.15 exp (?48.7 kcal/RT) (cm³/mole·sec), respectively. k₁ was one order larger than the value obtained in the flame experiment by Halstead and Jenkins.     

Thermal isomerization and decomposition of 1,2-butadiene in shock waves

1,2-Butadiene diluted with Ar was heated behind reflected shock waves over the temperature and the total density range of 1100–1600 K and 1.36 × 10^?5 ? 1.75 × 10^?5 mol/cm³. The major products were 1,3-butadiene, 1-butyne, 2-butyne, vinylacetylene, diacetylene, allene, propyne, C₂H₆, C₂H₄, CH₄, and benzene, which were analyzed by gas chromatography. The UV kinetic absorption spectroscopy at 230 nm showed that 1,2-butadiene rapidly isomerizes to 1,3-butadiene from the initial stage of the reaction above 1200 K. In order to interpret the formation of 1,3-butadiene, 1-butyne, and 2-butyne, it was necessary to include the parallel isomerizations of 1,2-butadiene to these isomers. The present data were successfuly modeled with a 82 reaction mechanism. From the modeling, rate constant expressions were derived for the isomerization 1,2-butadiene = 1,3-butadiene to be k₃ = 2.5 × 10¹³ exp(?63 kcal/RT) s^?1 and for the decomposition 1,2-butadiene = C₃H₃ + CH₃ to be k₆ = 2.0 × 10¹⁵ exp(?75 kcal/RT) s^?1, where the activation energies, 63 kcal/mol and 75 kcal/mol, were assumed. These rate constants are only applicable under the present experimental conditions, 1100–1600 K and 1.23–2.30 atm. © 1995 John Wiley & Sons, Inc.     

Rate constants of the reactions of OH radicals with cyclopropane and cyclobutane

The kinetics of the reactions of hydroxy radicals with cyclopropane and cyclobutane has been investigated in the temperature range of 298–492 K with laser flash photolysis/resonance fluorescence technique. The temperature dependence of the rate constants is given by k₁ = (1.17 ± 0.15) × 10^?16 T^3/2 exp[?(1037 ± 87) kcal mol^?1/RT] cm³ molecule^?1 s¹ and k₂ = (5.06 ± 0.57) × 10^?16 T^3/2 exp[?(228 ± 78) kcal mol^?1/RT] cm³ molecule^?1 s^?1 for the reactions OH + cyclopropane → products (1) and OH + cyclobutane → products (2), respectively. Kinetic data available for OH + cycloalkane reactions were analyzed in terms of structure-reactivity correlations involving kinetic and energetic parameters.     

Kinetics of the reactions of the hydroxyl radical with dimethyl ether and diethyl ether

Absolute rate coefficients for the reactions of the hydroxyl radical with dimethyl ether (k₁) and diethyl ether (k₂) were measured over the temperature range 295–442 K. The rate coefficient data, in the units cm³ molecule^?1 s^?1, were fitted to the Arrhenius equations k₁ (T) = (1.04 ± 0.10) × 10^?11 exp[?(739 ± 67 cal mol^?1)/RT] and k₂(T) = (9.13 ± 0.35) × 10^?12 exp[+(228 ± 27 kcal mol^?1)/RT], respectively, in which the stated error limits are 2σ values. Our results are compared with those of previous studies of hydrogen-atom abstraction from saturated hydrocarbons by OH. Correlations between measured reaction-rate coefficients and C? H bond-dissociation energies are discussed.     

A laser flash photolysis kinetic study of reactions of the Cl2− radical anion with oxygenated hydrocarbons in aqueous solution

A laser photolysis–long path laser absorption (LP‐LPLA) experiment has been used to determine the rate constants for H‐atom abstraction reactions of the dichloride radical anion (Cl₂⁻) in aqueous solution. From direct measurements of the decay of Cl₂⁻ in the presence of different reactants at pH = 4 and I = 0.1 M the following rate constants at T = 298 K were derived: methanol, (5.1 ± 0.3)·10⁴ M⁻¹ s⁻¹; ethanol, (1.2 ± 0.2)·10⁵ M⁻¹ s⁻¹; 1‐propanol, (1.01 ± 0.07)·10⁵ M⁻¹ s⁻¹; 2‐propanol, (1.9 ± 0.3)·10⁵ M⁻¹ s⁻¹; tert.‐butanol, (2.6 ± 0.5)·10⁴ M⁻¹ s⁻¹; formaldehyde, (3.6 ± 0.5)·10⁴ M⁻¹ s⁻¹; diethylether, (4.0 ± 0.2)·10⁵ M⁻¹ s⁻¹; methyl‐tert.‐butylether, (7 ± 1)·10⁴ M⁻¹ s⁻¹; tetrahydrofuran, (4.8 ± 0.6)·10⁵ M⁻¹ s⁻¹; acetone, (1.41 ± 0.09)·10³ M⁻¹ s⁻¹. For the reactions of Cl₂⁻ with formic acid and acetic acid rate constants of (8.0 ± 1.4)·10⁴ M⁻¹ s⁻¹ (pH = 0, I = 1.1 M and T = 298 K) and (1.5 ± 0.8) · 10³ M⁻¹ s⁻¹ (pH = 0.42, I = 0.48 M and T = 298 K), respectively, were derived. A correlation between the rate constants at T = 298 K for all oxygenated hydrocarbons and the bond dissociation energy (BDE) of the weakest C‐H‐bond of log k_2nd = (32.9 ± 8.9) − (0.073 ± 0.022)·BDE/kJ mol⁻¹ is derived. From temperature‐dependent measurements the following Arrhenius expressions were derived: k (Cl₂⁻ + HCOOH) = (2.00 ± 0.05)·10¹⁰·exp(−(4500 ± 200) K/T) M⁻¹ s⁻¹, E_a = (37 ± 2) kJ mol⁻¹ k (Cl₂⁻ + CH₃COOH) = (2.7 ± 0.5)·10¹⁰·exp(−(4900 ± 1300) K/T) M⁻¹ s⁻¹, E_a = (41 ± 11) kJ mol⁻¹ k (Cl₂⁻ + CH₃OH) = (5.1 ± 0.9)·10¹²·exp(−(5500 ± 1500) K/T) M⁻¹ s⁻¹, E_a = (46 ± 13) kJ mol⁻¹ k (Cl₂⁻ + CH₂(OH)₂) = (7.9 ± 0.7)·10¹⁰·exp(−(4400 ± 700) K/T) M⁻¹ s⁻¹, E_a = (36 ± 5) kJ mol⁻¹ Finally, in measurements at different ionic strengths (I) a decrease of the rate constant with increasing I has been observed in the reactions of Cl₂⁻ with methanol and hydrated formaldehyde. © 1999 John Wiley & Sons, Inc. Int J Chem Kinet 31: 169–181, 1999     

Kinetic model of induced codeposition of Ni-Mo alloys

The kinetic model of induced codeposition of nickel-molybdenum alloys from ammoniun citrate solution was studied on rotating disk electrodes to predict the behavior of the electrode-position. The molybdate (MoO42-) could be firstly electro-chemically reduced to MoO2, and subsequently undergoes a chemical reduction with atomic hydrogen previously adsorbed on the inducing metal nickel to form molybdenum in alloys. The kinetic equations were derived, and the kinetic parameters were obtained from a comparison of experimental results and the kinetic equations. The electrochemical rate constants for discharge of nickel, molybdenum and water could been expressed as k1(E) = 1. 23 × 109 CNi exp( - 0.198FE/RT) mol/(dm2·s), k2(E) =3.28× 10-10 CMoexp( - 0. 208FE/ RT) mol/(dm2·s) and k3(E) = 1.27 × 10-6exp( - 0.062FE/ RT) mol/(dm2 · s), where CNi and CMo are the concentrations of the nickel ion and molybdate, respectively, and E is the applied potential vs. saturated calomel electrode (SCE). The codeposition p     

Kinetics of hydroxyl radical reactions with formaldehyde and 1,3,5-trioxane between 290 and 600 K

Absolute rate constants are measured for the reactions: OH + CH₂O, over the temperature range 296–576 K and for OH + 1,3,5-trioxane over the range 292–597 K. The technique employed is laser photolysis of H₂O₂ or HNO₃ to produce OH, and laser-induced fluorescence to directly monitor the relative OH concentration. The results fit the following Arrhenius equations: k (CH₂O) = (1.66 ± 0.20) × 10^?11 exp[?(170 ± 80)/RT] cm³ s^?1 and k(1,3,5-trioxane) = (1.36 ± 0.20) × 10^?11 exp[?(460 ± 100)/RT] cm³ s^?1. The transition-state theory is employed to model the OH + CH₂O reaction and extrapolate into the combustion regime. The calculated result covering 300 to 2500 K can be represented by the equation: k(CH₂O) = 1.2 × 10^?18 T^2.46 exp(970/RT) cm³ s^?1. An estimate of 91 ± 2 kcal/mol is obtained for the first C? H bond in 1,3,5-trioxane by using a correlation of C? H bond strength with measured activation energies.     

The relaxation of HCl(ν = 1) and DCl(ν = 1) by O atoms between 196 and 400 K

The rates of relaxation of HCl(ν = 1) and DCl(ν = 1) by atomic oxygen have been determined between 196 and 400 K using the laser induced vibrational fluorescence method. The values of the rate constants, κ_1,H and κ_1,D, can be matched quite well by Arrhenius expressions: κ_1,H = 6.2 × 10^?12 exp (?1.0₅ kcal mole^?1/RT) cm³ molecule^?1 s^?1 and κ_1,D = 2.9 × 10^?12 exp (?0.5 kcal mole^?1/RT) cm³ molecule^?1 s^?1. The most likely explanation of the absolute and relative magnitudes of these rate constants appears to be that relaxation occurs as a result of non-adiabatic vibronic transitions during collisions.     

Rate constants and Arrhenius parameters for the reactions of Cl atoms with the halogenated ethers: CF3CH2OCHF2, CF3CHClOCHF2, and CF3CH2OCClF2

Rate constants have been determined for the reactions of Cl atoms with the halogenated ethers CF₃CH₂OCHF₂, CF₃CHClOCHF₂, and CF₃CH₂OCClF₂ using a relative‐rate technique. Chlorine atoms were generated by continuous photolysis of Cl₂ in a mixture containing the ether and CD₄. Changes in the concentrations of these two species were measured via changes in their infrared absorption spectra observed with a Fourier transform infrared (FTIR) spectrometer. Relative‐rate constants were converted to absolute values using the previously measured rate constants for the reaction, Cl + CD₄ → DCl + CD₃. Experiments were carried out at 295, 323, and 363 K, yielding the following Arrhenius expressions for the rate constants within this range of temperature:Cl + CF₃CH₂OCHF₂: k = (5.1₅ ± 0.7) × 10⁻¹² exp(−1830 ± 410 K/T) cm³ molecule⁻¹ s⁻¹ Cl + CF₃CHClOCHF₂: k = (1.6 ± 0.2) × 10⁻¹¹ exp(−2450 ± 250 K/T) cm³ molecule⁻¹ s⁻¹ Cl + CF₃CH₂OCClF₂: k = (9.6 ± 0.4) × 10⁻¹² exp(−2390 ± 190 K/T) cm³ molecule⁻¹ s⁻¹ The results are compared with those obtained previously for the reactions of Cl atoms with other halogenated methyl ethyl ethers. © 2001 John Wiley & Sons, Inc. Int J Chem Kinet 33: 165–172, 2001     

Rate constant for the reaction of nh2 with ozone in relation to atmospheric processes

The absolute rate constant of the reaction between NH₂ and ozone has been measured using a flash photolysis-laser resonance technique and found to be k₄ = 6.3 (=1.0) × 10^?14 cm³ molecule^? s^?1 at room temperature. The Arrhenius expression, determined from measurements in the temperature range 298–380 K is k₄ = 4.2 × 10^?12 exp(?2.5 = 0.5/RT) (E in kcal mole ^?1. The possibility of formation or elimination of nitrogen oxides from the reactions of NH₂ in the atmosphere is examined.