A novel method for the synthesis of Au nanoparticles incorporated amorphous hydrogenated carbon films

In this communication we report a novel electrochemical route for the preparation of Au nanoparticles incorporated a-C:H films on single crystal silicon substrates by choosing methanol as carbon source and Au nanoparticles as dopant. The morphology, composition and structure of the film have been investigated and the results show that the film obtained in our method is a hydrogenated diamond-like carbon film and zero-valence Au nanoparticles are stable and well-dispersed into the amorphous carbon matrix with unchanged size. It is simplified to achieve the co-deposition of carbon and metal by using metal nanoparticles rather than the metal salt solution as the dopant. The incorporation of Au nanoparticles in the carbon matrix can drastically decrease the resistivity and convert a-C:H films from insulator to semiconductor easily. The growth mechanisms of the Au-DLC films are also discussed.     

Study of Aggregation of Gold Nanoparticles in Chitosan

In this work it is reported the synthesis of gold nanoparticles supported in situ in chitosan by solvated metal atom dispersion technique in order to study the inclusion of Au nanoparticles in the biopolymer matrix. To study their aggregation along time and compare with the synthesis of Au/2-propanol colloid by chemical liquid deposition technique. Studies of Au nanoparticles aggregation along time, supported nanoparticles and colloidal nanoparticles morphology were also carried out. The characterization of Au nanoparticles was performed by transmission electron microscopy, field-emission and scanning electron microscopy, infrared spectroscopy, X-ray diffraction, light scattering and ultraviolet–visible spectroscopy. Metal colloid showed fractal agglomeration type and delay time after the synthesis, the agglomeration size increased to flocculate. Au nanoparticles supported in chitosan showed the same shape as colloids and fractal aggregation was mostly distributed on the matrix.     

Designing the Hotspots Distribution by Anisotropic Growth

Changing the morphology of noble metal nanoparticles and polarization dependence of nanoparticles with different morphologies is an important part of further research on surface plasma enhancement. Therefore, we used the method based on Matlab simulation to provide a simple and effective method for preparing the morphologies of Au nanoparticles with different morphologies, and prepared the structure of Au nanoparticles with good uniformity and different morphologies by oblique angle deposition (OAD) technology. The change of the surface morphology of nanoparticles from spherical to square to diamond can be effectively controlled by changing the deposition angle. The finite difference time domain (FDTD) method was used to simulate the electromagnetic fields of Au nanoparticles with different morphologies to explore the polarization dependence of nanoparticles with different shapes, which was in good agreement with Raman spectrum.     

A facile route to the hierarchical assembly of Au nanoparticles on carbon nanotubes through Cu~(2+) coordination for surface-enhanced Raman scattering

We report the hierarchical assembly of Au nanoparticles on carboxylized carbon nanotubes(c-CNTs)through Cu~(2+) coordination. This route is facile and green, and can easily control the loading density of Au nanoparticles. The c-CNT matrix ensures uniform distribution of Au nanoparticles, which is particularly important for the enrichment of hot spots while preventing their serious agglomeration. Moreover, the cCNT matrix also contributes to the electromagnetic enhancement due to its surface plasmon resonance,and the chemical enhancement due to the adsorption of the target molecules. The resulting Au@c-CNT nanohybrids exhibit a remarkable synergy in SERS compared to neat Au nanoparticles.     

Modification in structural,optical, morphological,and electrical properties of zinc oxide (ZnO) nanoparticles (NPs) by metal (Ni,Co) dopants for electronic device applications

In the present work, Zinc Oxide (ZnO) nanoparticles (NPs) were synthesized by the chemical co-precipitation method using Zinc Chloride as the initial chemical, while Nickel and Cobalt chloride as dopants. Phase identification of metal (Ni, Co) doped Zinc Oxide nanoparticles (NPs) was observed using x-ray diffraction (XRD). The small lattice distortion or phase changes appeared due to shifting of diffraction angles peaks towards larger angle in ZnO are corresponded to metal (Ni, Co) dopant. The average crystallite size appears to decrement in NP size from 7.67 nm to 6.52 nm and 5.35 nm to 5.17 nm with increasing 5 % to 80 % of metal (Ni, Co) dopant respectively. The optical characteristics, including the absorption spectra of the prepared sample were observed through UV–Vis spectroscopy, Meanwhile SEM confirmed the observation of composition change in specimen with metal (Ni, Co) dopant concentration. The bandgap value was also found decrement 5.23 eV to 5.05 eV with increment of metal (Ni, Co) dopant concentration. The functional groups were measured by Fourier transformation infrared spectroscopy (FTIR). FTIR peaks found the metal (Ni, Co) doped ZnO with the vibration mode of (Zn²⁺ –O^2?) ions due to the increment of dopant concentrations. Furthermore, electrical results show the ohmic behavior of prepared samples. These findings indicate the possibility of tuning optical, structural and electrical properties of metal (Ni, Co) doped ZnO with various dopant concentrations of Nickel and will have great potential to find application in optoelectronic devices.     

Controlled supramolecular assembly of micelle-like gold nanoparticles in PS-b-P2VP diblock copolymers via hydrogen bonding

We report a facile strategy to synthesize amphiphilic gold (Au) nanoparticles functionalized with a multilayer, micelle-like structure consisting of a Au core, an inner hydroxylated polyisoprene (PIOH) layer, and an outer polystyrene shell (PS). Careful control of enthalpic interactions via a systematic variation of structural parameters, such as number of hydroxyl groups per ligand (N(OH)) and styrene repeating units (N(PS)) as well as areal chain density of ligands on the Au-core surface (Σ), enables precise control of the spatial distribution of these nanoparticles. This control was demonstrated in a lamellae-forming poly(styrene-b-2-vinylpyridine) (PS-b-P2VP) diblock copolymer matrix, where the favorable hydrogen-bonding interaction between hydroxyl groups in the PIOH inner shell and P2VP chains in the PS-b-P2VP diblock copolymer matrix, driving the nanoparticles to be segregated in P2VP domains, could be counter balanced by the enthalphic penalty of mixing of the PS outer brush with the P2VP domains. By varying N(OH), N(PS), and Σ, the nanoparticles could be positioned in the PS or P2VP domains or at the PS/P2VP interface. In addition, the effect of additives interfering with the hydrogen-bond formation between hydroxyl groups on Au nanoparticles and P2VP chains in a diblock copolymer matrix was investigated, and an interesting pea-pod-like segregation of Au nanoparticles in PS domains was observed.     

Surface modification of gold nanoparticles with polyhedral oligomeric silsesquioxane and incorporation within polymer matrices

A new approach to achieve polymer‐mediated gold ferromagnetic nanocomposites in a polyhedral oligomeric silsesquioxane (POSS)‐containing random copolymer matrix has been developed. Stable and narrow distributed gold nanoparticles modified by 3‐mercaptopropylisobutyl POSS to form Au‐POSS nanoparticles are prepared by two‐phase liquid‐liquid method. These Au‐POSS nanoparticles form partial particle aggregation by blending with poly(n‐butyl methacrylate) (PnBMA) homopolymer because of poor miscibility between Au‐POSS and PnBMA polymer matrix. The incorporation the POSS moiety into the PnBMA main chain as a random copolymer matrix displays well‐dispersed gold nanoparticles because the POSS‐POSS interaction enhances miscibility between gold nanoparticles and the PnBMA‐POSS copolymer matrix. This gold‐containing nanocomposite exhibits ferromagnetic phenomenon at room temperature. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 811–819, 2009     

Diamond nanoparticles as a way to improve electron transfer in sol–gel l-lactate biosensing platforms

In the present work, we have included for the first time diamond nanoparticles (DNPs) in a sol–gel matrix derived from (3-mercaptopropyl)-trimethoxysilane (MPTS) in order to improve electron transfer in a lactate oxidase (LOx) based electrochemical biosensing platform. Firstly, an exhaustive AFM study, including topographical, surface potential (KFM) and capacitance gradient (CG) measurements, of each step involved in the biosensing platform development was performed. The platform is based on gold electrodes (Au) modified with the sol–gel matrix (Au/MPTS) in which diamond nanoparticles (Au/MPTS/DNPs) and lactate oxidase (Au/MPTS/DNPs/LOx) have been included. For the sake of comparison, we have also characterized a gold electrode directly modified with DNPs (Au/DNPs). Secondly, the electrochemical behavior of a redox mediator (hydroxymethyl-ferrocene, HMF) was evaluated at the platforms mentioned above. The response of Au/MPTS/DNPs/LOx towards lactate was obtained. A linear concentration range from 0.053 mM to 1.6 mM, a sensitivity of 2.6 μA mM⁻¹ and a detection limit of 16 μM were obtained. These analytical properties are comparable to other biosensors, presenting also as advantages that DNPs are inexpensive, environment-friendly and easy-handled nanomaterials. Finally, the developed biosensor was applied for lactate determination in wine samples.     

Substrate effect on the melting temperature of gold nanoparticles

Previous experimental, molecular dynamics, and thermodynamic researches on the melting temperature of Au nanoparticles on tungsten substrate provide entirely different results. To account for the substrate effect upon the melting point of nanoparticles, three different substrates were tested by using a thermodynamic model: tungsten, amorphous carbon, and graphite. The results reveal that the melting point suppression of a substrate-supported Au nanoparticle is principally ruled by the free surface-to-volume ratio of the particle or the contact angle between the particle and the substrate. When the contact angle θ is less than 90°, a stronger size-dependent melting point depression compared with those for free nanoparticles is predicted; when the contact angle θ is greater than 90°, the melting temperature of the supported Au nanoparticles are somewhat higher than those for free nanoparticles.     

Nucleation and growth of gold nanoparticles on adsorption layers and in ultrathin films of poly(2-vinylpyridine)

Peculiarities of the nucleation and growth of gold nanoparticles on adsorption layers and in ultrathin films of poly(2-vinylpyridine) (PVP) in the chemical reduction of sorbed Au(III) ions and the consequent thermal treatment of systems are studied by X-ray photoelectron spectroscopy and optical spectroscopy. It is shown that nitrogens of PVP pyridine groups coordinate gold atoms. It is revealed that, even at relatively short contact between PVP film saturated with chloroauric acid and the solution of strong reductant NaBH₄, Au(III) ions are reduced to metal. As a result, quasi-metal gold particles are formed. At the same time, when exposing a PVP-Au system to the solution of weak reductant NH₂OH, the process of reduction proceeds in several stages. First, Au(III) ions are reduced to Au(I) followed by the reduction to Au(0) as a result of disproportionation reaction. It is demonstrated for the first time that, upon using NH₂OH, the rate of reduction, as well as the structure of prepared PVP-Au nanocomposite films depends to substantial extent on solution pH. Prolonged annealing of ultrathin nanocomposites at 150 °C, i.e., above the glass transition temperature of polymer matrix, leads to an increase in the sizes of metal particles and the formation of systems characterized by intense absorption within the 500–600-nm range due to the localized plasmon resonance of gold nanoparticles.     

Electrodeposition and characterization of Pd nanoparticles doped amorphous hydrogenated carbon films

Palladium (0) nanoparticles incorporated hydrogenated amorphous carbon (Pd/a-C:H) films were synthesized on single crystal silicon (100) substrates by electrochemical deposition route using methanol and camphor as carbon source, and Pd nanoparticles as dopant. The characterization results indicate that Pd nanocrystalline particles with diameter in the range of 1–5 nm dispersed in the amorphous carbon matrix. Compared with pure a-C:H films, the introduction of Pd nanoparticles didn't change the structure of carbon films. At the end, the growth mechanism of the Pd/a-C:H composite films was discussed.     

A rapid and simple approach for glycoform analysis

Fast glycoform analysis is important for quality control of glycoproteins that account for over 40% of the approved biopharmaceuticals. Herein, we realized an Au nanoparticle-based lectin affinity chromatography (LAC) using simple standard laboratory equipment for fast glycoform analysis. Pisum sativum agglutinin (PA), a lectin derived from P. sativum, was covalently conjugated to Au nanoparticles via naturally formed carboxylic groups onto the surface of Au nanoparticles and amino groups of PA. Each model glycoprotein was separated into several fractions including the unbound, weakly bound, modestly bound, and strongly bound glycoforms based on affinity strength of the glycoform toward PA. A single run of Au nanoparticle-based LAC was finished within 18 min, which could be further decreased by centrifuging the mixture of the PA functionalized Au nanoparticles and the glycoproteins at a higher speed. To our knowledge, we are the first to use Au nanoparticles as LAC matrix.     

Enhanced optical immunosensor based on surface plasmon resonance for determination of transferrin

Wavelength modulation surface plasmon resonance biosensors (SPR) using colloidal Au nanoparticles and double-linker sensing membrane enhancement are reported for determination of transferrin. The 2-mercaptoethylamine (MEA) was immobilized on the biosensor surface with traditional amine coupling method. The interaction between colloidal Au nanoparticles and MEA was investigated. The anti-transferrin was immobilized on the biosensor surface prepared with staphylococcal protein A (SPA). The interaction of the antibody and antigen was monitored in real time. The good response was obtained in the concentration range 1-20, 0.1-20 and 0.05-20 μg/mL for directly immune assay, double-linker assay and colloidal Au-amplified assay. The result clearly demonstrates that these methods may obtain significantly enhancement of sensitivity for the wavelength modulation SPR biosensor.     

Structural influence of transition metal (Sc,Y, and Lu) atoms inside gold nanoparticles

We theoretically investigated the influences of dopant transition metal atoms on structures and stability of gold nanoparticles. The optimized structures of Au₃M and Au₃M in an Au₃₂ cage (M = Au, Sc, Y, and Lu) obtained using relativistic density functional theory, show different configurations. Substitutions of one Au atom in the Au₄ cluster by only one M atom cause the Au₃M clusters to form equilateral triangles where M atoms prefer the central position, which is different from the original rhombus structure of a pure Au₄ cluster. All Au₃M nanoparticles, however, assume stable tetrahedral configurations in the Au₃₂ cage. Analysis of electronic structures indicates that the equilateral triangle Au₃M nanoparticles have higher chemical stability, in other words, lower reactivity than Au₃M@Au₃₂, while interaction energies between M and Au atoms in the Au₃M are smaller than those in Au₃M@Au₃₂. Different amounts of charge transfer and orbital hybridizations between the Au and M cause the change of the chemical stability and interaction energies. Our results indicate the potential manipulation of gold nanoparticle reactivity by metal substitution.     

Alignment and switching of AFLC materials using various boundary conditions

We have systematically studied the quality of bookshelf alignment and electro-optic characteristics of two antiferroelectric liquid crystal materials in cells with various boundary conditions. The electro-optic characteristics of the materials studied depend strongly on both the liquid crystal materials and the boundary conditions at the supporting substrates. We have compared a number of observations in these cells: the tendency to form AFLC domains in the virgin state and after switching; the surface electroclinic effect (SEC effect); the transmission-voltage characteristics (TV) when driven with triangular- and square-wave voltages at various frequencies; the threshold field and the conditions for relaxation to the AFLC state. The set of samples includes specially designed and manufactured test cells with different polyimides as alignment layers, treated with varying rubbing strengths. We discuss the significance of various factors and show the importance of simultaneously optimizing both materials and cell parameters for AFLC applications.     

Controlling dispersion and migration of particulate additives with block copolymers and Diels-Alder chemistry

Reversible Diels-Alder chemistry was exploited to develop thermo-responsive polymer films. Here, low molecular weight poly(styrene) (PS) and poly(ethylene glycol) (PEG) were prepared with furyl and maleimido chain ends, respectively. These polymers were then tethered together to form a thiol-terminated PEG-b-PS diblock copolymer ligand via a Diels-Alder linkage and were employed to randomly disperse 10 nm diameter Au nanoparticles within a matrix of PEG. Thermal treatment caused the Diels-Alder linkages between the polymer blocks to be severed, resulting in controllable surface functionalization due to phase separation. Migration of the Au nanoparticles to the surface of the films was characterized by Rutherford backscattering spectroscopy, small-angle X-ray scattering, contact angle measurements, and atomic force microscopy.     

Rapid one-step synthesis, characterization and functionalization of silica coated gold nanoparticles

This paper describes a rapid, simple and one-step method for preparing silica coated gold (Au@SiO₂) nanoparticles with fine tunable silica shell thickness and surface functionalization of the prepared particles with different groups. Monodispersed Au nanoparticles with a mean particle size of 16 nm were prepared by citrate reduction method. Silica coating was carried out by mixing the as prepared Au solution, tetraethoxysilane (TEOS) and ammonia followed by microwave (MW) irradiation. Although there are several ways of coating Au nanoparticles with silica in the literature, each of these needs pre-coating step as well as long reaction duration. The present method is especially useful for giving the opportunity to cover the colloidal Au particles with uniform silica shell within very short time and forgoes the use of a silane coupling agent or pre-coating step before silica coating. Au@SiO₂ nanoparticles with wide range of silica shell thickness (5-105 nm) were prepared within 5 min of MW irradiation by changing the concentration of TEOS only. The size uniformity and monodispersity were found to be better compared to the particles prepared by conventional methods, which were confirmed by dynamic light scattering and transmission electron microscopic techniques. The prepared Au@SiO₂ nanoparticles were further functionalized with amino, carboxylate, alkyl groups to facilitate the rapid translation of the nanoparticles to a wide range of end applications. The functional groups were identified by XPS, and zeta potential measurements.     

Bovine serum albumin stabilized iron oxide and gold bimetallic heterodimers: Synthesis,characterization and Stereological study

In this time researchers make a great efforts to develop new hybrid nanoparticles for medical and pharmaceutical applications. Fe₃O₄‐Au hybrid heterodimers have been prepared with superior properties for various claims. Unfortunately, Fe₃O₄‐Au heterodimers are not stable in the physiological medium. In this study, we employed the albumin macromolecules as a stabilizer of Fe₃O₄‐Au hybrid nanoparticles (noted as Fe₃O₄‐Au‐BSA hybrid nanoparticles). After characterization of synthesized nanoparticles by FTIR, UV–Vis, TEM, DLS, DSC, VSM and XRD techniques, the in vitro and in vivo biocompatibility of these nanoparticles were also evaluated. We encountered with an amazing result which confirmed nanoparticles could be stabilized by linking the BSA on the surface of Fe₃O₄‐Au heterodimers. Also, intravenous injection of Fe₃O₄‐Au‐BSA hybrid nanoparticles up to 400 mg/kg to Balb C mice show that these nanoparticles were non‐toxic. The biocompatibility and stereological study had been performed for more than 30 days after nanoparticles administration, using hystomorphometric analysis. Remarkably, to the best of our knowledge, it was the first time the biocompatibility and biodegradability of Fe₃O₄‐Au were studied and evaluated by stereological technique. Further promotion and biomedical usage of this type of hybrid nanoparticles are underway in our laboratory.     

Facile preparation of Au nanoparticle-embedded polydopamine hollow microcapsule and its catalytic activity for the reduction of methylene blue

Abstract

Development of novel supported catalysts with high activity and stability is still a challenge. In this study, the Au-polydopamine (Au-PDA) hollow microcapsules with Au nanoparticles embedded into the PDA microcapsule shell have been synthesized through a simple template-induced covalent assembly method, where polystyrene (PS) nanospheres were used as templates to form core/shell structured PS/Au-PDA composites, followed by core removal through tetrahydrofuran etching. Their morphology and composition were characterized by scanning electron microscope (SEM), transmission electron microscope (TEM), Fourier transform infrared spectra (FT-IR), UV-Vis spectrophotometer and X-ray diffraction (XRD), respectively. Results showed that the Au-PDA microcapsules possessed well-fined hollow structure and uniform sizes with inner diameter of about 385?nm, shell thickness of about 30?nm, and Au nanoparticles with diameter of about 17?nm incorporated. The catalytic performance of Au-PDA hollow microcapsules was evaluated through the reduction of methylene blue (MB) dye with NaBH₄ as a reducing agent. Compared to PDA/Au composites with Au nanoparticles loaded on the surface of PDA microspheres, as-prepared Au-PDA hollow microcapsules show good stability and recyclability in the catalytic experiments as the Au nanoparticles were firmly wrapped in PDA matrix, which makes the Au-PDA hollow microcapsules a practicable catalyst candidate for advanced catalytic systems.