Single-laboratory validation of a modified liquid chromatographic method with UV detection for determination of trenbolone residues in bovine liver and muscle

Trenbolone acetate is a synthetic testosterone analog registered for use in a number of countries as a growth-promoting hormone, applied as an implant in the ears of feedlot cattle. The method is intended for the detection and quantitation of trace amounts of alpha- and beta-trenbolone in bovine tissues (muscle, liver) by liquid chromatography (LC) with UV detection and eliminates the use of the structural analog, 19-nortestosterone, as an internal standard. Trenbolone residues are extracted from tissues that have been homogenized in sodium acetate with a 3-phase liquid-liquid extraction by adding a mixture of water-acetonitrile-dichloromethanehexane, with trenbolone residues preferentially partitioned into the middle acetonitrile layer. The extract is passed through solid-phase extraction cartridges (both C18 and silica gel) using, respectively, methanol-water and acetone-toluene as eluents. Reversed-phase high-performance LC separation is performed, an octadecyl-bonded column with methanol-acetonitrile-water used as mobile phase for sample analysis. The limit of detection is 0.2 ng/g in muscle tissue and 0.6 ng/g in liver tissue, with coefficients of variation of 3.5-12.1% for alpha- and beta-trenbolone at concentrations from 0.2 to 4.0 ng/g fortified in muscle and 3.3-26.0% from liver fortified at 0.6-10.0 ng/g. Absolute recoveries of 40-130% were observed, but the use of fortified matrix curves eliminated recovery correction. Critical control points were identified in a pH adjustment step and an evaporation step during method validation, which included ruggedness testing. Analysis of incurred tissues (bovine liver and muscle) stored at -20 degrees C for over 25 weeks did not identify any significant loss of residues.     

Determination of sulphonamides in animal tissues by high performance liquid chromatography with pre-column derivatization of 9-fluorenylmethyl chloroformate

A novel approach for simultaneous determination of 12 sulphonamides (sulphadiazine, sulphamethazine, sulphathiazole, sulphadimethoxine, sulphamerazine, sulphapyridine, sulphamethoxazole, suphamethizole, sulphaquinoxaline, sulphameter, sulphamonomethoxine, and sulphachloropyridazine) in animal tissues (swine muscle and liver, chicken muscle, beef muscle) by HPLC with UV detection has been developed. A pre-column derivatization of the sulphonamide compounds with 9-fluorenylmethyl chloroformate (FMOC-Cl) has been proposed and the reaction conditions have been optimized. The FMOC-sulphonamide derivatives were purified by SPE with silica gel as solid support prior to HPLC separation. The limits of detection for the sulphonamide compounds were greatly improved after the derivatization and purification step for the derivatives. Sulphonamide residues in animal tissues were extracted by acetonitrile and purified by solid phase extraction with C(18) as the solid support. The method developed has high sensitivity and good repeatability, and the average recoveries for most of the sulphonamides at various spiking levels were above 70% with relative standard deviations below 13.7%. The limits of detection for most sulphonamides can reach 3-5 microg/kg.     

A review of analytical methods for the determination of sulfolane and alkanolamines in environmental studies

Sulfolane and alkanolamines are used extensively in the processing of sour natural gases. Over many years of operation, there have been inadvertent leaks of these chemicals to groundwater and wetlands surrounding gas processing facilities, leading to uptake by vegetation. Because sulfolane and alkanolamines are extremely water-soluble, their analysis has presented challenges, particularly requirements for suitable extraction from biological matrixes and soil, along with sensitive detection using commonly available instrumentation. Analytical methods usually use gas chromatography or liquid chromatography with a variety of detector systems. Sample preparation techniques may include extraction with organic solvents, water, or a combination of these. In some cases, direct aqueous injections have been used. Derivatization of alkanolamines has been used to improve the chromatographic separations and detection. More recent procedures, using positive-ion electrospray ionization mass spectrometry (MS), have been useful for the confirmation of uptake of the alkanolamines and transformation products by wetland vegetation. Future developments will likely center on further MS analyses for identification of metabolites and transformation products in aquatic environments.     

Isolation of poly(propylene glycol)s from water for quantitative analysis by reversed-phase liquid chromatography

Procedures for the isolation of poly(propylene glycol)s (PPGs) from a water matrix have been developed. Solid-phase extraction with an octadecylsilica cartridge and elution with methanol or with a graphitised carbon black cartridge and elution with a mixture of dichloromethane-methanol (4:1) or liquid-liquid extraction with chloroform were all suitable for model samples. However, only liquid-liquid extraction was suitable both for model and real environmental samples. Methods for reversed-phase liquid chromatographic determination of PPGs based on derivatisation and ultraviolet or fluorescence detection have been developed. Four derivatisation agents [3,5-dinitrobenzoyl chloride, phenyl isocyanate, 1-naphthoyl chloride and 1-naphthyl isocyanate (NIC)] were tested. Only NIC was found to give good reproducibility as well as a satisfactory detection limit. Finally, a method with liquid-liquid extraction with chloroform, derivatisation with NIC and liquid chromatographic separation with fluorescence detection was established. The developed method shows a highly correlated linearity of the analytical signals of particular homologues within a wide concentration range (approximately from 0.01 to 10 mg l(-1)). The precision of measurements is satisfactory for homologues having 5-9 oxypropylene subunits and becomes worse with an increase in the number of oxypropylene subunits. The limit of detection is 2 microg l(-1) for the majority of homologues. The method is suitable for the isolation and quantitative determination of PPGs in river water samples and as a tool for biodegradation testing.     

Ion-pair extraction and high-performance liquid chromatographic determination of tianeptine and its metabolites in human plasma, urine and tissues

An isocratic reversed-phase ion-pair liquid chromatographic method for the determination of tianeptine and its two main metabolites in plasma, urine and tissues, using an internal standard, is reported. The influence of two stationary phases on the retention of the drugs was studied. The drugs were extracted as ion pairs, using a heptane-octanol-tetraheptylammonium bromide mixture (98:2:0.5, v/v/w) as extraction solvent. This extraction procedure yielded plasma drug recoveries of greater than 60% and allowed UV detection at 220 nm without interference from endogenous components of plasma, urine or tissues. Linear standard curves up to 1.00 micrograms/ml and drug determination down to 0.01 microgram/ml were observed. This method has been successfully applied to the analysis of human plasma and urine samples and of encephales from tianeptine-dosed rats.     

复杂基体中痕量多环芳烃分析测定方法的研究进展

介绍了环境样品（水和土壤）以及植物油中痕量多环芳烃的分析检测方法。对样品的预处理过程和分析方法做了评价。采用一些新的预处理方法（包括液相色谱法、固相萃取法、超临界二氧化碳萃取法）,并结合色谱-质谱在线联用分析检测方法能够获得比较理想的分析结果。引用文献52篇。     

Optimization of protein extraction and solubilization for mature grape berry clusters

Protein extraction from grape berries has been challenging, particularly in mature berries, which can have sugar concentrations as high as 26%. Grape skins and seeds contain large amounts of polyphenols, which can also interfere with efficient protein extraction. In plants, two extraction protocols, TCA/acetone-based and phenol-based methods, have been mainly used to extract proteins from different organs or tissues on many species. However, few results have been reported for grape berry clusters. We wanted to determine which of these protocols was optimal for berry clusters in order to achieve both efficient protein extraction and high spot resolution on 2-D gels. Four protocols, derived from either TCA/acetone or phenol procedures, were tested on mature Cabernet Sauvignon whole berry clusters. The phenol-based protocols were superior to the TCA/acetone methods, showing larger protein yields and greater spot resolution on 2-D gels. One method was clearly superior to the rest, a phenol-based extraction method combined with resuspension in the presence of both urea and thiourea as chaotropes. A total of 81 spots were excised and identified following MALDI-TOF/TOF MS analyses. Their identification helped further characterize the specificity of each extraction procedure.     

Sample preparation methods to analyze fipronil in honey by gas chromatography with electron-capture and mass spectrometric detection

Several sample preparation methods have been assayed to analyze residues of fipronil in honey. After diluting the honey, liquid-liquid extraction (LLE) with organic solvents, and solid-phase extraction (SPE) on commercial cartridges or Florisil-packed column have been tested at three concentration levels: 0.01, 0.1 and 1 mg/kg. LLE with n-hexane or SPE on a Florisil column resulted to be the most suitable procedures to analyze fipronil at trace concentrations. Fipronil was quantified by gas chromatography (GC) with electron-capture detection (ECD) or mass spectrometric (MS) detection after conventional or matrix-matched calibration. The detection limit of fipronil in honey samples was below 1 microg/kg. The degradation of fipronil in honey has also been studied, being identified three minor degradation products in the extracts.     

石墨烯应用于样品前处理的研究进展

样品前处理技术在样品分析中发挥着越来越重要的作用,而对分析物的富集能力和对样品基体的净化程度主要取决于高效的样品前处理材料,所以发展高性能的样品前处理材料一直是该领域的前沿研究方向。近年来,各类先进材料已经被引入样品前处理领域,发展了多种高性能的萃取材料。由于独特的物理化学性质,石墨烯已在各个研究领域获得广泛关注,在样品前处理领域也发挥着重要作用。基于高的比表面积、大的π电子结构、优异的吸附性能、丰富的官能团和易于化学改性等优点,石墨烯和氧化石墨烯基萃取材料被成功应用于各种样品的前处理,对不同领域中多种类型分析物表现出优异的萃取性能。该论文总结和讨论了近3年来石墨烯材料(石墨烯、氧化石墨烯及其功能化材料)在柱固相萃取、分散固相萃取、磁性固相萃取、搅拌棒萃取、纤维固相微萃取和管内固相微萃取等方面的研究进展。基于多种萃取机理如π-π、静电、疏水、亲水、氢键等相互作用,石墨烯萃取材料能够高效萃取和选择性富集不同类别的目标分析物,如重金属离子、多环芳烃、塑化剂、雌激素、药物分子、农药残留、兽药残留等。基于新型石墨烯萃取材料的各种样品前处理技术与多种检测技术如色谱、质谱、原子吸收光谱等联用,广泛应用于环境监测、食品安全和生化分析等领域。最后,总结了石墨烯在样品前处理领域中存在的问题,并展望了未来的发展趋势。     

样品预处理与实时直接分析质谱的联用技术及应用

近年来,与实时直接分析质谱(DART-MS)相结合的样品预处理技术发展迅速,使得对复杂生物、环境、法医学、食品、个体小生物以及单细胞样品中的分析物进行直接分析成为可能。然而固体基质内部分析物检测困难、痕量分析物检测性能不佳已成为限制DART-MS进一步发展的关键问题。针对这些问题,多年来,研究人员在不同领域对样品预处理与质谱联用进行了多种尝试。该文以固相萃取(SPE)、分散固相萃取(DSPE)、搅拌棒吸附萃取(SBSE)、固相微萃取(SPME)、机械化学提取(MCE)和微波提取(MAE)等样品预处理技术为例,对不同研究领域中样品预处理技术与DART-MS联用的研究成果进行了综述,并对未来的发展趋势进行了展望。希望该综述能为开发与DART-MS联用的新型样品处理技术提供参考和帮助。     

Comparative study of sample preparation procedures to determine fipronil in pollen by gas chromatography with mass spectrometric and electron-capture detection

Several sample preparation methods have been assayed to analyze residues of fipronil in pollen at trace concentrations. Extraction with organic solvents, solid-phase extraction on either commercial cartridges or a Florisil-packed column and a matrix solid-phase dispersion, also with Florisil as a dispersing agent, have been tested. Determination of fipronil in the extracts has been carried out by GC with electron-capture and mass spectrometric detection. An extraction with acetonitrile followed by a clean-up on ODS or polymeric cartridges was the most suitable procedure to obtain acceptable recoveries and relatively simple chromatograms. The matrix-effects observed in the quantification can be corrected with a matrix-matched calibration.     

石蜡包埋组织中组蛋白的提取分离和翻译后修饰的定量分析

组蛋白翻译后修饰(HPTMs)参与基因转录调控,其异常与肿瘤等重大疾病的发生发展密切相关。石蜡包埋组织是当前疾病研究的重要样本资源,对肿瘤机制和标志物研究具有重要意义。目前基于质谱的蛋白质组学技术已成为HPTMs分析的有力工具,而针对福尔马林固定石蜡包埋(FFPE)组织样品的HPTMs分析还十分有限。该研究发展了一种基于高效液相色谱-串联质谱的FFPE组织样本HPTMs分离分析新方法。通过研究并优化组蛋白的提取策略,建立了FFPE组织样本脱蜡水化处理、蛋白质提取与聚丙烯酰胺凝胶电泳分离相结合的组蛋白提取和分离方法。通过研究FFPE切片数量、组蛋白化学衍生化方法等对组蛋白鉴定的影响,确定了组蛋白处理的具体步骤。通过HPLC分离结合非依赖性采集模式的质谱分析,鉴定了组蛋白修饰的类型、位点和丰度。最后,将优化的实验方法应用于FFPE临床样本的HPTMs分析,鉴定了2例人乳腺浸润性癌和癌旁正常组织的HPTMs图谱,均获得了100种以上的不同组蛋白修饰形式的多肽。定量分析了他们的差异性水平,通过主成分降维分析,发现浸润性癌和癌旁正常组织之间组蛋白修饰丰度存在明显的差异,且差异性具有一定的规律,特别是涉及转录调控的组蛋白修饰与乳腺癌的预后和治疗靶点具有相关性,进而探讨了乳腺癌中异常HPTMs的生物学意义。该研究对临床石蜡样本中组蛋白修饰的分离分析以及肿瘤表观遗传标志物的检测进行了有益的探索。     

Solid-phase extraction techniques based on nanomaterials for mycotoxin analysis: An overview for food and agricultural products

Mycotoxin contamination is a globally concerned problem for food and agricultural products since it may directly or indirectly induce severe threats to human health. Sensitive and selective screening is an efficient strategy to prevent or reduce human and animal exposure to mycotoxins. However, enormous challenges exist in the determination of mycotoxins, arising from complex sample matrices, trace-level analytes, and the co-occurrence of diverse mycotoxins. Appropriate sample preparation is essential to isolate, purify, and enrich mycotoxins from complicated matrices, thus decreasing sample matrix effects and lowering detection limits. With the cross-disciplinary development, new solid-phase extraction strategies have been exploited and integrated with nanotechnology to meet the challenges of mycotoxin analysis. This review summarizes the advance and progress of solid-phase extraction techniques as the methodological solutions for mycotoxin analysis. Emphases are paid on nanomaterials fabricated as trapping media of solid-phase extraction techniques, including carbonaceous nanoparticles, metal/metal oxide-based nanoparticles, and nanoporous materials. Advantages and limitations are discussed, along with the potential prospects.     

Evaluation of extraction buffers using the current approach of detecting multiple allergenic and nonallergenic proteins in food

The detection of food allergens has been a challenge because of the increasing need to ensure the absence of undeclared allergens in foods. The current trend in the detection of some food allergens, like peanuts, is based on the detection of multiple allergenic and nonallergenic proteins, and this is the approach that kit manufacturers have adopted. Because commercial kits differ in their ability to detect allergens, regulatory agencies, the food industry, and kit manufacturers are working together to standardize the detection methods. Three kits for the detection of peanuts have been evaluated for performance by the AOAC Research Institute. For this evaluation, a peanut butter suspension was used as a reference material. Several kit components contribute to between-kit analytical variation, even when the same sample is used. One component of commercial kits, which may be contributing to this variability, is the sample extraction buffer. In this study, differences in extractability of 3 allergenic foods were evaluated by using 4 different extraction buffers. The conclusion is that optimum allergen extractability was buffer-dependent, and no single buffer is appropriate for use as a universal extraction solution for all allergenic foods. Therefore, a thorough evaluation of sample preparation buffers needs to be performed for every individual allergenic food. In light of the results obtained, the current approach used for detection of peanut allergens based on the detection of multiple allergenic and nonallergenic proteins is being analyzed.     

新型样品前处理材料在环境污染物分析检测中的研究进展

针对复杂样品的分析和痕量目标物的检测,样品前处理是必不可少的,高效的样品前处理技术不仅可以去除或减小样品基质干扰而且能够实现分析物的富集,提高分析检测的准确性和灵敏度。近年来,固相萃取、磁分散固相萃取、枪头固相萃取、搅拌棒萃取、固相微萃取等高效的样品前处理技术已在环境污染物分析检测中获得广泛关注,萃取效率主要取决于萃取材料,所以新型的高效萃取材料一直是样品前处理研究领域的重要发展方向。该文总结和讨论了近年来新型样品前处理材料在环境污染物分析检测中的研究进展,主要聚焦在石墨烯、氧化石墨烯、碳纳米管、无机气凝胶、有机气凝胶、三嗪基功能材料、三嗪基聚合物、分子印迹聚合物、共价有机框架材料、金属有机框架材料以及它们的功能化萃取材料等。这些材料已经被应用于环境样品中不同类别污染物的萃取富集,如重金属离子、多环芳烃、塑化剂、烷烃、苯酚、氯酚、氯苯、多溴联苯醚、全氟磺酸、全氟羧酸、雌激素、药物残留、农药残留等。这些样品前处理材料具有高的表面积、大量的吸附位点,并涉及多种萃取机理如π-π、静电、疏水、亲水、氢键、卤键等相互作用。基于这些萃取材料的多种样品前处理技术与各类检测方法如色谱、质谱、原子吸收光谱、荧光光谱、离子迁移谱等相结合,已广泛应用于环境污染物的高灵敏分析检测。最后,该文总结了样品前处理发展中存在的问题,并展望了其未来在环境分析中的发展趋势。     

Effects of the matrix and sample preparation on the determination of fluoroquinolone residues in animal tissues

The effects of aqueous-organic solvent extraction and enzymic digestion sonication procedure on the isolation of spiked fluoroquinolones from poultry tissue have been studied. The highest recovery from spiked tissue was obtained using a mixture of trichloroacetic acid-acetonitrile (8:2) as extractant and an SDB1 cartridge for clean-up purposes. Validation data are presented for enrofloxacin, ciprofloxacin, sarafloxacin and difloxacin. The spiking procedure (spike contact time, spike solvent and matrix) had a small influence on the recovery of fluroquinolones from poultry muscle or liver. The effects of a different extraction on the determination of incurred enrofloxacin and its metabolite, ciprofloxacin, residues in poultry tissues have been investigated. The extraction procedures investigated--aqueous-organic solvent extraction, enzymic digestion or sonication--all gave similar results for incurred fluoroquinolone concentration in poultry muscle after correlation for spike recovery. The highest results were obtained in poultry liver when enzymic digestion has been used.     

An optimized digestion method coupled to electrochemical sensor for the determination of Cd, Cu, Pb and Hg in fish by square wave anodic stripping voltammetry

An optimized digestion method coupled to electrochemical detection to monitor lead, copper, cadmium and mercury in fish tissues was developed. Square wave anodic stripping voltammetry (SWASV) coupled to disposable screen-printed electrodes (SPEs) was employed as fast and sensitive electroanalytical method for heavy metals detection. Different approaches in digestion protocols were assessed. The study was focused on Atlantic hake fillets because of their wide diffusion in the human nutrition. Best results were obtained by digesting fish tissue with hydrogen peroxide/hydrochloric acid mixture coupled to solid phase (SP) purification of the digested material. This combined treatment allowed quantitative extraction from fish tissue (muscle) of the target analytes, with fast execution times, high sensitivity and avoiding organic residues eventually affecting electrochemical measurements. Finally, the method has been validated with reference standard materials such as dogfish muscle (DORM-2) and mussel tissues (NIST 2977).     

Determination of vinca alkaloids in mouse tissues by high-performance liquid chromatography.

A high-performance liquid chromatographic method is described for the determination of vinblastine in various normal mouse tissues, such as lung, heart, liver, kidney and muscles, and in implanted MO4 tumours. Vincristine was used as the internal standard. Freshly obtained mouse tissue or tumour tissue was frozen at -20 degrees C and then lyophilized. After lyophilisation, the dry tissues were pulverized and homogeneously mixed, and an aliquot was suspended in 0.1 M hydrochloric acid. The drugs of interest were then isolated from this suspension using ion-pair extraction at pH 3 with octylsulphate as counter-ion. The obtained extracts were analysed on a reversed-phase system with a cyanopropyl stationary phase. The detection limit was 1 ng/l in plasma and 10 ng/g in tissue. The extraction recoveries of vincristine and vinblastine were between 45 and 67%, and there were no interferences from blank components. Preliminary pharmacokinetic data for different mouse tissues and tumour implanted in muscle tissue are presented.     

Analytical procedures for the determination of emerging organic contaminants in plant material: A review

In this review, recent developments for the determination of emerging organic contaminants (EOCs) in plant tissues are discussed focusing on the homogenization, extraction and determination steps involved. Eleven classes of EOCs, namely antibiotics, analgesics, antiepileptics, antidepressants, antiseptics, plasticizers, fragrances, surfactants, flame retardants, and phenoxy acid herbicides, have been evaluated. Methods are critically reviewed in terms of all the analytical steps involved in the analysis, sampling and sample preparation, separation, and the detection strategies employed. The extraction from tissue samples was performed in most cases by solid–liquid extraction, whereas the clean-up was performed by solid-phase extraction. The identification and quantification of EOCs in crops from the agricultural field (i.e. parts per billion range) is usually performed by using mass spectrometry techniques such as single quadrupole mass spectrometry or tandem mass spectrometry coupled to high resolution chromatographic techniques. Enzyme-linked immunosorbent assays are more rarely used. New developments such as in vivo solid-phase microextraction (SPME) and the assessment of the bioavailability–bioaccesibility of contaminants in crops are shown. The main scope of this review is to critically evaluate the current state of the art of the analytical techniques used and to identify the research needs in the determination of EOCs in crops.