Application of molybdenum bis(imido) complexes in ethylene dimerisation catalysis

In combination with EtAlCl(2) (Mo : Al = 1 : 15) the imido complexes [MoCl(2)(NR)(NR')(dme)] (R = R' = 2,6-Pr(i)(2)-C(6)H(3) (1); R = 2,6-Pr(i)(2)-C(6)H(3), R' = Bu(t) (3); R = R' = Bu(t) (4); dme = 1,2-dimethoxyethane) and [Mo(NHBu(t))(2)(NR)(2)] (R = 2,6-Pr(i)(2)-C(6)H(3) (5); R = Bu(t) (6)) each show moderate TON, activity, and selectivity for the catalytic dimerisation of ethylene, which is influenced by the nature of the imido substituents. In contrast, the productivity of [MoCl(2)(NPh)(2)(dme)] (2) is low and polymerisation is favoured over dimerisation. Catalysis initiated by complexes 1-4 in combination with MeAlCl(2) (Mo : Al = 1 : 15) exhibits a significantly lower productivity. Reaction of complex 5 with EtAlCl(2) (2 equiv.) gives rise to a mixture of products, while addition of MeAlCl(2) affords [MoMe(2)(N-2,6-Pr(i)(2)-C(6)H(3))(2)]. Treatment of 6 with RAlCl(2) (2 equiv.) (R = Me, Et) yields [Mo({μ-N-Bu(t)}AlCl(2))(2)] (7) in both cases. Imido derivatives 1 and 3 react with Me(3)Al and MeAlCl(2) to form the bimetallic complexes [MoMe(2)(N{R}AlMe(2){μ-Cl})(NR')] (R = R' = 2,6-Pr(i)(2)-C(6)H(3) (8); R = 2,6-Pr(i)(2)-C(6)H(3), R' = Bu(t) (10)) and [MoMe(2)(N{R}AlCl(2){μ-Cl})(NR')] (R = R' = 2,6-Pr(i)(2)-C(6)H(3) (9); R = 2,6-Pr(i)(2)-C(6)H(3), R' = Bu(t) (11)), respectively. Exposure of complex 8 to five equivalents of thf or PMe(3) affords the adducts [MoMe(2)(N-2,6-Pr(i)(2)-C(6)H(3))(2)(L)] (L = thf (12); L = PMe(3) (13)), while reaction with NEt(3) (5 equiv.) yields [MoMe(2)(N-2,6-Pr(i)(2)-C(6)H(3))(2)]. The molecular structures of complexes 5, 9 and 11 have been determined.     

Synthesis and characterization of 2,6-Dipp(2)-H(3)C(6)SnSnC(6)H(3)-2,6-Dipp(2) (Dipp = C(6)H(3)-2,6-Pr(i)(2)): a tin analogue of an alkyne

The reaction of Sn(Cl)C(6)H(3)-2,6-Dipp(2) (Dipp = C(6)H(3)-2,6-Pr(i)()(2)) with a stoichiometric amount of potassium in benzene affords 2,6-Pr(i)()(2)-H(3)C(6)SnSnC(6)H(3)-2,6-Pr(i)()(2) (1) as dark blue-green crystals. The compound 1 is a tin analogue of an alkyne. It was characterized by (1)H and (13)C NMR and UV-vis spectroscopy, cyclic voltammetry, combustion analysis and X-ray crystallography. The structural data show that 1 has a trans-bent, planar C(ipso)SnSnC(ipso) skeleton with a Sn-Sn bond distance of 2.6675(4) A and a Sn-Sn-C angle of 125.24(7) degrees. The Sn-Sn distance, which is ca. 0.15 A shorter than a conventional Sn-Sn single bond, and the trans-bent structure indicate the presence Sn-Sn multiple bond character unlike the related singly bonded ArPbPbAr species.     

Solid-state 119Sn NMR and Mössbauer spectroscopy of "distannynes": evidence for large structural differences in the crystalline phase

The "distannynes" Ar'SnSnAr' (Ar' = C6H3-2,6(C6H3-2,6-Pr(i)2)2) and ArSnSnAr (Ar = C6H3-2,6(C6H2-2,4,6-Pr(i)3)2) were examined by solid-state (119)Sn NMR and M?ssbauer spectroscopy. The two compounds display substantially different spectroscopic parameters, while differing only in the absence (Ar'SnSnAr') or presence (ArSnSnAr) of a para-Pr(i) group in the flanking aryl rings of their terphenyl substituents. The spectroscopic differences can be interpreted in terms of a more trans-bent geometry and a longer Sn-Sn bond for ArSnSnAr in comparison to the wider Sn-Sn-C angle (125.24(7) degrees ) and shorter Sn-Sn bond length (2.6675(4)A) determined from the crystal structure of Ar'SnSnAr'. The differences are consistent with previously published calculations by Nagase and Takagi for ArSnSnAr.     

Synthesis, characterization, and reactivity of rhodium(I) acetylacetonato complexes containing pyridinecarboxaldimine ligands

Addition of o-C 6H 4NCHNAr to Rh(coe) 2(acac) (coe = cis-cyclooctene, acac = acetylacetonato) gave several new iminopyridine rhodium(I) complexes of the type Rh(acac)(kappa (2)- o-C 6H 4 NCH NAr) ( 1a Ar = 4-C 6H 4-OMe; 1b Ar = 2,6-C 6H 3-Me 2; 1c Ar = 2,6-C 6H 3-Et 2; 1d Ar = 2,6-C 6H 3- i-Pr 2). All new rhodium complexes have been characterized by a number of physical methods, including multinuclear NMR spectroscopy and X-ray diffraction studies for 1b and 1c. Addition of CHCl 3 to 1a afforded the corresponding rhodium(III) complex trans-Rh(kappa (2)- o-C 6H 4 NCH NAr)(CHCl 2)(Cl)(acac) ( 2). Addition of B 2cat 3 (cat = 1,2-O 2C 6H 4) to 1 gave zwitterionic Rh(eta (6)-catBcat)(kappa (2)- o-C 6H 4 NCH NAr) ( 3). The molecular structure of 3b has been confirmed by a single crystal X-ray diffraction study and shows that the N 2Rh fragment is bound to the catBcat anion via one of the catecholato groups in a eta (6)-fashion. These complexes have also been examined for their ability to catalyze the hydroboration of a series of vinylarenes. Reactions using catecholborane and pinacolborane seem to proceed largely through a dehydrogenative borylation mechanism to give a number of boronated products.     

Synthesis and Characterization of Sterically Encumbered Derivatives of Aluminum Hydrides and Halides: Assessment of Steric Properties of Bulky Terphenyl Ligands

The synthesis and characterization of several sterically encumbered monoterphenyl derivatives of aluminum halides and aluminum hydrides are described. These compounds are [2,6-Mes(2)C(6)H(3)AlH(3)LiOEt(2)](n)() (1), (Mes = 2,4,6-Me(3)C(6)H(2)-), 2,6-Mes(2)C(6)H(3)AlH(2)OEt(2) (2), [2,6-Mes(2)C(6)H(3)AlH(2)](2) (3), 2,6-Mes(2)C(6)H(3)AlCl(2)OEt(2) (4), [2,6-Mes(2)C(6)H(3)AlCl(3)LiOEt(2)](n)() (5), [2,6-Mes(2)C(6)H(3)AlCl(2)](2) (6), TriphAlBr(2)OEt(2) (7), (Triph = 2,4,6-Ph(3)C(6)H(2)-), [2,6-Trip(2)C(6)H(3)AlH(3)LiOEt(2)](2) (8) (Trip = 2,4,6-i-Pr(3)C(6)H(2)-), 2,6-Trip(2)C(6)H(3)AlH(2)OEt(2) (9), [2,6-Trip(2)C(6)H(3)AlH(2)](2) (10), 2,6-Trip(2)C(6)H(3)AlCl(2)OEt(2) (11), and the partially hydrolyzed derivative [2,6-Trip(2)C(6)H(3)Al(Cl)(0.68)(H)(0.32)(&mgr;-OH)](2).2C(6)H(6) (12). The structures of 2, 3a, 4, 6, 7, 9a, 10a, 10b, 11, and 12 were determined by X-ray crystallography. The structures of 3a, 9a, 10a, and 10b, are related to 3, 9, and 10, respectively, by partial occupation of chloride or hydride by hydroxide. The compounds were also characterized by (1)H, (13)C, (7)Li, and (27)Al NMR and IR spectroscopy. The major conclusions from the experimental data are that a single ortho terphenyl substituent of the kind reported here are not as effective as the ligand Mes (Mes = 2,4,6-t-Bu(3)C(6)H(2)-) in preventing further coordination and/or aggregation involving the aluminum centers. In effect, one terphenyl ligand is not as successful as a Mes substituent in masking the metal through agostic and/or steric effects.     

Reaction of the stable silylene Si[(NCH2But)2C6H4-1,2] with lithium amides

The thermally stable silylene Si[(NCH2But)2C6H4-1,2] 1 undergoes oxidative addition reactions with the lithium amides LiNRR'(R = SiMe3, R' = But; R = SiMe3, R' = C6H3Me2-2,6; R = R' = Me or R = R' = Pri) to afford the new lithium amides Li(THF)2[N(R)Si(SiMe3){(NCH2But)2C6H4-1,2}][R = But2 or R = C6H3Me2-2,6 (3a)] or the new tris(amino)functionalised silyllithiums Li(THF)x[Si{(NCH2But)2C6H4-1,2}NRR'][R = SiMe3, R' = C6H3Me2-2,6, x = 2 (3); R = R'= Me, x = 3 (4) or R = R' = Pri, x = 3 (5)]. Compounds 4 and 5 are stable at ambient temperature but compound 3 is thermally labile and converts into 3a upon heating. The pathway for the formation of 2 and 3 is discussed and the X-ray structures of 2-5 are presented.     

Terphenyl ligand stabilized lead(II) derivatives: steric effects and lead-lead bonding in diplumbenes

The reaction of PbBr(2) with the lithium reagents LiC(6)H(3)-2,6-(C(6)H(3)-2,6-Pr(i)(2))(2) (LiArPr(i)(2)) and Et(2)O.LiC(6)H(3)-2,6-(2,6-Pr(i)-4-Bu(t)C(6)H(2))(2) (Et(2)O.LiArPr(i)(2)Bu(t)) furnished the bromide bridged organolead(II) halides [Pb(mu-Br)ArPr(i)(2)](2) (1) and[Pb(mu-Br)ArPr(i)(2)Bu(t)](2) (2) as orange crystals. Treatment of 1 with a stoichiometric amount of methylmagnesium bromide resulted in the "diplumbene" Pr(i)(2)Ar(Me)PbPb(Me)ArPr(i)(2) (3). The addition of 1 equiv of 4-tert-butylphenylmagnesium bromide to 1 afforded the feebly associated, Pb-Pb bonded species [Pb(C(6)H(4)-4-Bu(t))ArPr(i)(2)](2) (4), whereas the corresponding reaction of tert-butylmagnesium chloride and 1 afforded the monomer Pb(Bu(t))ArPr(i)(2) (5). The reaction of the more crowded aryl lead(II) bromide [Pb(mu-Br)ArPr(i)(3)](2) (Ar = C(6)H(3)-2,6(C(6)H(2)-2,4,6-Pr(i)(3))(2)) with 4-isopropyl-benzylmagnesium bromide or LiSi(SiMe(3))(3) yielded the monomers 6, [Pb(CH(2)C(6)H(4)-4-Pr(i))ArPr(i)(3)], or 7, [Pb(Si(SiMe(3))(3))ArPr(i)(3)]. All compounds were characterized with use of X-ray crystallography, (1)H, (13)C, and (207)Pb NMR (3-7), and UV-vis spectroscopy. The dimeric Pb-Pb bonded (Pb-Pb = 3.1601(6) A) structure of 3 may be contrasted with the previously reported monomeric structure of Pb(Me)ArPr(i)(3), which differs from 3 only in that it has para Pr(i) substituents on the flanking aryl rings. The presence of these groups is sufficient to prevent the weak Pb-Pb bonding seen in 3. The dimer 4 displays a Pb-Pb distance of 3.947(1) A, which indicates a very weak lead-lead interaction, and it is possible that this close approach could be caused by packing effects. The monomeric structures of 6 and 7 are attributable to steric effects and, in particular, to the large size of ArPr(i)(3).     

Reduction of benzophenone and 9(10H)-anthracenone with the magnesium complex [(2,6-iPr2C6H3-bian)Mg(thf)3

The reduction of benzophenone with the magnesium complex [(2,6-iPr(2)C(6)H(3)-bian)Mg(thf)(3)] (1), containing the 1,2-bis[(2,6-diisopropylphenyl)imino]acenaphthene dianion, affords the pinacolato complex [(2,6-iPr(2)C(6)H(3)-bian)Mg(thf)](2)[micro-O(2)C(2)Ph(4)].(C(6)H(6))(4) (2). The reaction of 1 with 9(10H)-anthracenone yields the 9-anthracenolato complex [(2,6-iPr(2)C(6)H(3)-bian)Mg(OC(14)H(9))(thf)(2)] (3). Complexes 2 and 3 were characterized by elemental analyses, UV/Vis, IR, and ESR spectroscopy, as well as by single crystal X-ray diffraction. Complex 2 dissociates in solution with splitting of the bridging pinacolato unit, forming the biradical diimino/ketyl complex [(2,6-iPr(2)C(6)H(3)-bian)Mg(thf)(OCPh(2))].     

Kinetic and donor stabilization of organotellurenyl iodides and azides

The first tellurium compounds containing the extremely bulky tris(phenyldimethylsilyl)methyl (Tpsi) and 2,6-bis(2,4,6-triisopropylphenyl)phenyl (2,6-Trip(2)C(6)H(3)) moieties have been synthesized and isolated. Careful oxidation of the tellurolate TpsiTeLi (1) resulted in the formation of the crowded ditellane (TpsiTe)(2) (2), and iodination of 2 gave the alkanetellurenyl iodide TpsiTeI (3). In a similar fashion, the terphenyl-substituted ditellane (2,6-Trip(2)C(6)H(3)Te)(2) (9) and the arenetellurenyl iodide 2,6-Trip(2)C(6)H(3)TeI (10) were prepared. Reaction of the iodides TpsiTeI (3) and 2,6-Trip(2)C(6)H(3)TeI (10), as well as TripTeI, MesTeI (Trip = 2,4,6-triisopropylphenyl, Mes = 2,4,6-tri-tert-butylphenyl), and the donor-stabilized 2-Me(2)NCH(2)C(6)H(4)TeI, with AgN(3) resulted in the formation and isolation of the corresponding tellurenyl azides TpsiTeN(3) (4), TripTeN(3) (7), MesTeN(3) (8), 2,6-Trip(2)C(6)H(3)TeN(3) (11), and 2-Me(2)NCH(2)C(6)H(4)TeN(3) (12). Furthermore, the corresponding tris(ethyldimethylsilyl)methyl-containing (Tesi) tellurium compounds (TesiTe)(2), TesiTeI (5), and TesiTeN(3) (6) have been prepared but could not be isolated in pure form. The crystal structures of TpsiTeLi (1), (TpsiTe)(2) (2), TpsiTeN(3) (4), 2,6-Trip(2)C(6)H(3)TeI (10), 2,6-Trip(2)C(6)H(3)TeN(3) (11), and 2-Me(2)NCH(2)C(6)H(4)TeN(3) (12) have been determined by X-ray diffraction. Additionally, computational studies of the molecules for which experimental structural data were available were performed.     

Alkali-metal mediated reactivity of a diaminobromoborane: mono- and bis-borylation of naphthalene versus boryl lithium or hydroborane formation

Reaction of lithium with PDABBr [PDA = C(6)H(4)-1,2-(NTripp)(2), Tripp = 2,4,6-Pr(i)(3)C(6)H(2)] and naphthalene afforded 2- and 2,6-borylated naphthalenes; conversely, use of high-sodium lithium (0.5% Na) afforded the lithium boryl [(PDAB)Li(THF)(2)]; this work establishes that main group reagents can achieve selective borylations of fused polycyclic aromatics under mild conditions in good yields.     

Lewis base induced tuning of the Ge-Ge bond order in a "digermyne"

The reaction of the "digermyne" Ar'GeGeAr' (Ar' = C6H3-2,6(C6H3-2,6-Pr(i)2)2; Ge-Ge = 2.2850(6) A) with mesityl isocyanide affords the bis adduct [Ar'GeGeAr'(CNMes)2] which results in the conversion of a Ge-Ge multiple bond to a long Ge-Ge single bond (= 2.6626(8) A).     

Bis(imino)phenoxide complexes of aluminium

Reaction of Me(3)Al (one equivalent) with the bis(imino)phenol, [2,6-(ArNCH)(2)-4-MeC(6)H(2)OH] (I)(Ar = 2,6-Pr(i)(2)C(6)H(3)) in toluene at ambient temperature yields the yellow complex [Me(2)Al[2,6-(ArNCH)(2)-4-MeC(6)H(2)O]](1). Interaction of two equivalents of Me(3)Al in refluxing toluene affords the red complex [(Me(2)Al)(2)[2-ArNCH(Me)-6-(ArNCH)-4-MeC(6)H(2)O]](2). Similar interaction (two equivalents, refluxing toluene) of MeAlCl(2) or (i)Bu(3)Al with [2,6-(ArNCH)(2)-4-MeC(6)H(2)OH] affords [ClAl[2,6-(ArNCH)(2)-4-MeC(6)H(2)O](2)](3) or [(i)Bu(2)Al[2,6-(ArNCH)(2)-4-MeC(6)H(2)O]](4), respectively. Hydrolysis of 2 readily affords the iminoaminophenol ligand [2-(ArN=CH)-6-ArNHCH(Me)-4-MeC(6)H(2)OH](II), which reacts further with Me(3)Al to afford [Me(2)Al[2-ArNCH(Me)-6-(ArNCH)-4-MeC(6)H(2)O]](5). An X-ray study on reveals bidentate imino-alkoxide ligation about the distorted aluminium centre, whereas is a binuclear structure with tetrahedral aluminiums ligated by imino-alkoxide and amido-alkoxide ligand fragments, respectively. For and bidentate imino-alkoxide ligation is observed.     

Cyclopentadienyl chromium diimine and pyridine-imine complexes: ligand-based radicals and metal-based redox chemistry

Paramagnetic CpCr(III) complexes with antiferromagnetically-coupled anionic radical diimine and pyridine-imine ligands were prepared and characterized. The diimine chloro CpCr[(ArNCR)(2)]Cl complexes (1: Ar = 2,6-iPr(2)C(6)H(3) (Dpp), R = H; 2: Ar = 2,6-Me(2)C(6)H(3) (Xyl), R = Me; 3: Ar = 2,4,6-Me(3)C(6)H(2) (Mes), R = Me) were synthesized by treatment of previously reported Cr(diimine)(THF)(2)Cl(2) precursors with NaCp. Reduction of 1 with Zn gives CpCr[(DppNCH)(2)], 4, resulting from reduction of Cr(III) to Cr(II) with retention of the ligand-based radical. Alkoxide complexes CpCr[(DppNCH)(2)](OCR(2)R') (5: R = Me, R' = Ph; 6: R = iPr, R' = H) were synthesized by protonolysis of Cp(2)Cr with HOCR(2)R' in the presence of the neutral diimine and catalytic base. The corresponding radical pyridine-imine complexes CpCr(PyCHNMes)Cl (9), CpCr(PyCHNMes) (8), and CpCr(PyCHNMes)(OCMe(2)Ph) (11), were prepared by analogous routes. Oxidation of 8 with iodine gives CpCr(PyCHNMes)I (10) where oxidation of Cr(II) to Cr(III) again occurs with retention of the anionic pyridine-imine radical ligand. The molecular structures of complexes 1, 2, 4-8, 10 and 11 were determined by single-crystal X-ray diffraction. Unusual low energy bands were observed in the UV-vis spectra of the reported complexes, with particularly strong transitions observed for the Cr(II) complexes 4 and 8. The electronic structure of pyridine-imine complexes 8 and 10 were investigated by theoretical calculations.     

Reactions of the heavier group 14 element alkyne analogues Ar'EEAr' (Ar' = C6H3-2,6(C6H3-2,6-Pri2)2; E = Ge, Sn) with unsaturated molecules: probing the character of the EE multiple bonds

Reactions of the alkyne analogues Ar'EEAr' (Ar' = C6H3-2,6(C6H3-2,6-Pr(i)2)2; E = Ge (1); Sn (2)) with unsaturated molecules are described. Reaction of 1 and 2 with azobenzene afforded the new hydrazine derivatives Ar'E{(Ph)NN(Ph)}EAr' (E = Ge (3); Sn (4)). Treatment of 1 with Me3SiN3 gave the cyclic singlet diradicaloid Ar'Ge{mu2-(NSiMe3)}2GeAr' (5), whereas 2 afforded the monoimide bridged Ar'Sn{mu2-N(SiMe3)}SnAr' (6). Reaction of 1 with t-BuNC or PhCN yielded the adduct Ar'GeGe(CNBu(t))Ar' (7) or the ring compound (8). In contrast, the tin compound 2 did not react with either t-BuNC or PhCN. Treatment of 1 with N2CH(SiMe3) generated Ar'Ge{mu2-CH(SiMe3)}{mu2:eta2-N2CH(SiMe3)}{mu2-N2CH(SiMe3)}GeAr' (9) which contains ligands in three different bridging modes and no Ge-Ge bonding. Reaction of 1 with an excess of N(2)O gave a germanium peroxo species Ar'(HO)Ge(mu2-O)(mu2:eta2-O2)Ge(OH)Ar' (10) which features a ring. Oxidation of 1 by tetracyanoethylene (TCNE) led to cleavage of the Ge-Ge bond and formation of a large multiring system of formula Ar'Ge3+{(TCNE)2-}3{(GeAr')+}3. The digermyne 1 also reacted with 1 equiv of PhCPh to give the 1,2-digermacyclobutadiene 12, which has a ring, and with Me(3)SiCCH or PhCC-CCPh to activate a flanking C6H3-2,6-Pr(i)2 ring and give the tricyclic products 13 and 14. The "distannyne" 2 did not react with these acetylenes. Overall, the experiments showed that 1 is highly reactive toward unsaturated molecules, whereas the corresponding tin congener 2 is much less reactive. A possible explanation of the reactivity differences in terms of the extent of the singlet diradical character of the Ge-Ge and Sn-Sn bonds is discussed.     

Synthesis of molybdenum complexes that contain "hybrid" triamidoamine ligands, [(hexaisopropylterphenyl-NCH2CH2)2NCH2CH2N-aryl]3-, and studies relevant to catalytic reduction of dinitrogen

In the Buchwald-Hartwig reaction between HIPTBr (HIPT = 3,5-(2,4,6-i-Pr3C6H2)2C6H3 = hexaisopropylterphenyl) and (H2NCH2CH2)3N, it is possible to obtain a 65% isolated yield of (HIPTNHCH2CH2)2NCH2CH2NH2. A second coupling then can be carried out to yield a variety of "hybrid" ligands, (HIPTNHCH2CH2)2NCH2CH2NHAr, where Ar = 3,5-Me2C6H3, 3,5-(CF3)2C6H3, 3,5-(MeO)2C6H3, 3,5-Me2NC5H3, 3,5-Ph2NC5H3, 2,4,6-i-Pr3C6H2, or 2,4,6-Me3C6H2. The hybrid ligands may be attached to Mo to yield [hybrid]MoCl species. From the monochloride species, a variety of other species such as [hybrid]MoN, {[hybrid]MoN2}Na, and {[hybrid]Mo(NH3)}+ can be prepared. [Hybrid]MoN2 species were prepared through oxidation of {[hybrid]MoN2}Na species with ZnCl2, but they could not be isolated. [Hybrid]Mo=N-NH species could be observed as a consequence of the protonation of {[hybrid]MoN2}- species, but they too could not be isolated as a consequence of a facile decomposition to yield dihydrogen and [hybrid]MoN2 species. Attempts to reduce dinitrogen catalytically led to little or no ammonia being formed from dinitrogen. The fact that no ammonia was formed from dinitrogen in the case of Ar = 3,5-Me2C6H3, 3,5-(CF3)2C6H3, or 3,5-(MeO)2C6H3 could be attributed to a rapid decomposition of intermediate [hybrid]Mo=N-NH species in the catalytic reaction, a decomposition that was shown in separate studies to be accelerated dramatically by 2,6-lutidine, the conjugate base of the acid employed in the attempted catalytic reduction. X-ray structures of [(HIPTNHCH2CH2)2NCH2CH2N{3,5-(CF3)2C6H3}]MoCl and [(HIPTNHCH2CH2)2NCH2CH2N(3,5-Me2C6H3)]MoN2}Na(THF)2 are reported.     

'Pincer' dicarbene complexes of some early transition metals and uranium

The complexes [(C-N-C)MX(n)(thf)(m)] with the 'pincer' 2,6-bis(imidazolylidene)pyridine, (C-N-C) = 2,6-bis(arylimidazol-2-ylidene)pyridine, aryl = 2,6-Pr(i)2C6H3, M = V, X = Cl, n = 2, m = 1 1a; M = Cr, X = Cl, n = 2, m = 0, 2a, X = Br, 2b; M = Mn, X = Br, n = 2, m = 0, 3; M = Nb, X = Cl, n = 3, m = 0, 4; and M = U, X = Cl, n = 4, m = 0, 5, were synthesised by (a) substitution of labile tmed (1a), thf (2a, 3, 5) or dme (4) by free (C-N-C) or by (b) reaction of the bisimidazolium salt (CH-N-CH)Br2 with {Cr[N(SiMe3)2]2(thf)2} followed by amine elimination (2b). Attempted alkylation of 1a, 2, 3a and 4 with Grignard or alkyl lithiums gave intractable mixtures, and in one case [reaction of 1a with (mesityl)MgBr] resulted in exchange of Cl by Br (1b). Oxidation of 1a or [(C-N-C)VCl3] with 4-methylmorpholine N-oxide afforded the trans-V(C-N-C)(=O)Cl2, 6, which by reaction with AgBF4 in MeCN gave trans-[V(C-N-C)(=O)(MeCN)2][BF4]2, 7. Reaction of 1a with p-tolyl azide gave trans-V(C-N-C)(=N-p-tolyl)Cl2 8. The complex trans-Ti(C-N-C)(=NBu(t))Cl2, 9, was prepared by substitution of the pyridine ligands in Ti(NBu(t))Cl2(py)3 by C-N-C.     

Synthesis and structural characterization of mono- and bisfunctional o-carboranes

Functionalized o-carboranes are interesting ligands for transition metals. Reaction of LiC2B10H11 with Me2NCH2CH2Cl in toluene afforded 1-Me2NCH2CH2-1,2-C2B10H11 (1). Treatment of 1 with 1 equiv. of n-BuLi gave [(Me2NCH2CH2)C2B10H10]Li ([1]Li), which was a very useful synthon for the production of bisfunctional o-carboranes. Reaction of [1]Li with RCH2CH2Cl afforded 1-Me2NCH2CH2-2-RCH2CH2-1,2-C2B10H10 (R = Me2N (2), MeO (3)). 1 and 2 were also prepared from the reaction of Li2C2B10H10 with excess Me2NCH2CH2Cl. Treatment of [1]Li with excess MeI or allyl bromide gave the ionic salts, [1-Me3NCH2CH2-2-Me-1,2-C2B10H10][I] (4) and [1-Me2N(CH2=CHCH2)CH2CH2-2-(CH2=CHCH2)-1,2-C2B10H10][Br] (6), respectively. Interaction of [1]Li with 1 equiv. of allyl bromide afforded 1-Me2NCH2CH2-2-(CH2=CHCH2)-1,2-C2B10H10 (5). Treatment of [1]Li with excess dimethylfulvene afforded 1-Me2NCH2CH2-2-C5H5CMe2-1,2-C2B10H10 (7). Interaction of [1]Li with excess ethylene oxide afforded an unexpected product 1-HOCH2CH2-2-(CH2=CH)-1,2-C2B10H10 (8). 1 and 3 were conveniently converted into the corresponding deborated compounds, 7-Me2NHCH2CH2-7,8-C2B9H11 (9) and 7-Me2NHCH2CH2-8-MeOCH2CH2-7,8-C2B9H10 (10), respectively, in MeOH-MeOK solution. All of these compounds were characterized by various spectroscopic techniques and elemental analyses. The solid-state structures of 4 and 6-10 were confirmed by single-crystal X-ray analyses.     

Syntheses and structures of the arylaluminum chalcogenides (ArAlE)2 (Ar = 2-(NEt2CH2)-6-MeC6H3, E = Se; Ar = 2,6-(NEt2CH2)2C6H3, E = Se, Te)

Two intramolecular stabilized arylaluminum dihydrides, (2-(NEt2CH2)-6-MeC6H3)AlH2 (1) and (2,6-(NEt2CH2)2C6H3)AlH2 (2), were prepared by reducing the corresponding dichlorides with an excess of LiAlH4 in diethyl ether. Reactions of 1 and 2 with elemental selenium afforded the dimeric arylaluminum selenides [(2-(NEt2CH2)-6-MeC6H3)AlSe]2 (3) and [(2,6-(NEt2CH2)2C6H3)AlSe]2 (4). Reaction of 2 with metallic tellurium gave the dimeric arylaluminum telluride [(2,6-(NEt2CH2)2C6H3)AlTe]2 (5). The possible reaction pathway is discussed, and molecular structures determined by single-crystal X-ray analyses are presented for 3 and 5.     

A mononuclear indium(I) carbene analogue

The 'one pot' reaction between K[N(SiMe(3))(2)], InI and the beta-diimine ligand precursor [H(NDippCMe)(2)CH](Dipp = C(6)H(3)Pr(i)(2)-2,6) gave [In[(NDippCMe)(2)CH]], the first example of a two-coordinate, neutral, In(i) singlet 'carbene analogue'.     

Molecular N2 complexes of iron stabilised by N-heterocyclic 'pincer' dicarbene ligands

The first N2 complex stabilised by N-heterocyclic carbene ligands, Fe(C-N-C)(N2)2, has been obtained by the reduction of Fe(C-N-C)Br2 where C-N-C = 2,6-bis(aryl-imidazol-2-ylidene)pyridine, aryl = 2,6-Pr(i)2C6H3, with Na(Hg); it serves as a convenient precursor for other iron NHC 'pincer' complexes of the type Fe(C-N-C)(N2)L where L = C2H4, PMe3 and Fe(C-N-C)(CO)2.