Substrate effects in poly(ethylene glycol) self-assembled monolayers on granular and flame-annealed gold

Poly(ethylene glycol) (PEG) self-assembled monolayers (SAMs) are surface coatings that efficiently prevent nonspecific adhesion of biomolecules to surfaces. Here, we report on SAM formation of the PEG thiol CH3O(CH2CH2O)17NHCO(CH2)2SH (PEG(17)) on three types of Au films: thermally evaporated granular Au and two types of Au films from hydrogen flame annealing of granular Au, Au(111), and Au silicide. The different Au surfaces clearly affects the morphology and mechanical properties of the PEG(17) SAM, which is shown by AFM topographs and force distance curves. The two types of SAMs found on flame-annealed Au were denoted "soft" and "hard" due to their difference in stiffness and resistance to scratching by the AFM probe. With the aim of nanometer scale patterning of the PEG(17), the SAMs were exposed by low energy (1 kV) electron beam lithography (EBL). Two distinctly different types of behaviour were observed on the different types of SAM; the soft PEG(17) SAM was destroyed in a self-developing process while material deposition was dominant for the hard PEG(17) SAM.     

Molecular simulation study of water interactions with oligo (ethylene glycol)-terminated alkanethiol self-assembled monolayers

Molecular simulations were performed to study a system consisting of protein (e.g., lysozyme) and self-assembled monolayers (SAMs) terminating with different chemical groups in the presence of explicit water molecules and ions. Mixed SAMs of oligo (ethylene glycol) [S(CH2)4(OCH2CH2)4OH, (OEG)] and hydroxyl-terminated SAMs [S(CH2)4OH] with a mole fraction of OEG at chiOEG = 0.2, 0.5, 0.8, and 1.0 were used in this study. In addition, methyl-terminated SAMs [S(CH2)11CH3] were also studied for comparison. The structural and dynamic behavior of hydration water, the flexibility and conformation state of SAMs, and the orientation and conformation of protein were examined. Simulation results were compared with those of experiments. It appears that there is a correlation between OEG surface resistance to protein adsorption and the surface density of OEG chains, which leads to a large number of tightly bound water molecules around OEG chains and the rapid mobility of hydrated SAM chains.     

Odd-even variations in the wettability of n-alkanethiolate monolayers on gold by water and hexadecane: a molecular dynamics simulation study

Molecular dynamics (MD) simulations were performed to investigate odd-even chain length dependencies in the wetting properties of self-assembled monolayers (SAMs) of n-alkanethiols [CH3(CH2)n-1SH] on gold by water and hexadecane. Experimentally, the contact angle of hexadecane on the SAMs depends on whether n is odd or even, while contact angles for water show no odd-even dependence. Our MD simulations of this system included a microscopic droplet of either 256 water molecules or 60 hexadecane molecules localized on an n-alkanethiolate SAM on gold with either an even or odd chain length. Contact angles calculated for these nanoscopic droplets were consistent with experimentally observed macroscopic trends in wettability, namely, that hexadecane is sensitive to structural differences between odd- and even-chained SAMs while water is not. Structural properties for the SAMs (including features such as chain tilt, chain twist, and terminal methyl group tilt) were calculated during the MD simulations and used to generate IR spectra of these films that compared favorably with experimental spectra. MD simulations of SAMs in contact with slabs of water and hexadecane revealed that the effects of these solvents on the structure of the SAM was restricted to the chain terminus and had no effect on the inner structure of the SAM. The density profiles for water and hexadecane on the SAMs were different in that water displayed a significant depletion in its density at the liquid/SAM interface from its bulk value, while no such depletion occurred for hexadecane. This difference in contact may explain the lack of an odd-even variation in the wetting characteristics of water on these surfaces, because the water molecules are positioned further away from the surface and, therefore, are not sensitive to the structural differences in the average orientations for the terminal methyl groups in odd- and even-chained SAMs. In contrast, the differences in the wetting properties of hexadecane on the odd- and even-chained SAMs may reflect the closer proximity of these molecules to the SAM surface and a resulting greater sensitivity to the differences in the terminal methyl group orientations in the SAMs. SAM-solvent interaction energies were calculated during the MD simulations, yielding interaction energies that differed on the even- and odd-chained surfaces by approximately 10% for hexadecane and negligibly for water, in accord with estimates using experimental wetting results.     

Mixed self-assembled monolayers (SAMs) consisting of methoxy-tri(ethylene glycol)-terminated and alkyl-terminated dimethylchlorosilanes control the non-specific adsorption of proteins at oxidic surfaces

Monolayers from the newly synthesized compound methoxy-tri(ethylene glycol)-undecenyldimethylchlorosilane (CH3O(CH2CH2O)3(CH2)11Si(CH3)2Cl, MeO(EG)3C11DMS) and dodecyldimethylchlorosilane (DDMS), both pure and mixed, were prepared by self-assembly from organic solution in the presence of an organic base. The films obtained were characterized by advancing and receding contact angle measurements and ellipsometry to confirm the formation of self-assembled monolayers (SAMs). The resulting data on the covalently attached dimethylsilanes were compared to known oligo(ethylene glycol) (OEG)-terminated SAM systems based on terminal alkenes, thiolates or trihydrolyzable silanes. The composition of the mixed SAMs was found to depend directly and linearly on the composition of the silanization solution. Enhanced protein repellent properties were found for the SAMs using a variety of proteins, including the Ras Binding Domain (RBD), a protein with high relevance for cancer diagnostics. Roughly a RBD protein monolayer amount was adsorbed to silicon oxide surfaces silanized with DDMS or non-silanized silicon wafers, and in contrast, no RBD was adsorbed to surfaces silanized with MeO(EG)3C11DMS or to mixed monolayers consisting of DDMS and MeO(EG)3C11DMS if the content of OEG-silane overcame a critical content of X(EG) approximately 0.9.     

Interaction of self-assembled monolayers of oligo(ethylene glycol)-terminated alkanethiols with water studied by vibrational sum-frequency generation

Vibrational sum-frequency generation (VSFG) was used to investigate the conformational changes in self-assembled monolayers (SAMs) of (1-mercaptoundec-11-yl) hexa(ethylene glycol) monomethylether (EG6-OMe) on gold when exposed to liquid water. VSFG spectra of the EG6-OMe SAMs were recorded before, during, and after exposure of the films to water and after a subsequent evacuation step. While in contact with water the entire ethylene glycol chains are found in a random, solvated state, after removal from the fluid water molecules remain absorbed only at the terminal groups of the film giving rise to distinct conformational changes. After evacuation, the structure of the EG6-OMe SAM reverts to its original state, indicating that water has been removed from the monolayer. Our findings support recent ab initio calculations and Monte Carlo simulations on the interaction of ethylene glycol-terminated monolayers with water.     

Synthesis of a series of oligo(ethylene glycol)-terminated alkanethiol amides designed to address structure and stability of biosensing interfaces.

A strategy for the synthesis of a series of closely related oligo(ethylene glycol)-terminated alkanethiol amides (principally HS(CH(2))(m)CONH(CH(2)CH(2)O)(n)H; m = 2, 5, 11, 15, n = 1, 2, 4, 6, 8, 10, 12) and analogous esters has been developed. These compounds were made to study the structure and stability of self-assembled monolayers (SAMs) on gold in the prospect of designing new biosensing interfaces. For this purpose, monodisperse heterofunctional oligo(ethylene glycols) with up to 12 units were prepared. Selective monoacylation of the symmetrical tetra- and hexa(ethylene glycol) diols as their mesylates with the use of silver(I) oxide was performed. The synthetic approach was based on carbodiimide couplings of various oligo(ethylene glycol) derivatives to omega-(acetylthio) carboxylic acids via a terminal amino or hydroxyl function. SAM structures on gold were studied with respect to thickness, wettability (water contact angles approximately 30 degrees ), and conformation. A good fit was obtained for the relation between monolayer thickness (d) and the number of units in the oligo(ethylene glycol) chain (n): d = 2.8n + 21.8 (A). Interestingly, the corresponding infrared spectroscopy analysis showed a dramatic change in conformation of the oligomeric chains from all-trans (n = 4) to helical (n > or = 6) conformation. A crystalline helical structure was observed in the SAMs for n > 6.     

Ice nucleation and phase behavior on oligo(ethylene glycol) and hydroxyl self-assembled monolayers: simulations and experiments

The nucleation and phase behavior of ultrathin D2O-ice overlayers have been studied on oligo(ethylene glycol) (OEG)-terminated and hydroxyl self-assembled monolayers (SAMs) at low temperatures in ultrahigh vacuum. Infrared reflection-absorption spectroscopy (IRAS) is used to characterize the ice overlayers, the SAMs, and the interactions occurring between the ice and the SAM surfaces. Spectral simulations, based on optical models in conjunction with Maxwell Garnett effective medium theory, point out the importance of including voids in the modeling of the ice structures, with void fractions reaching 60% in some overlayers. The kinetics of the phase transition from amorphous-like to crystalline-like ice upon isothermal annealing at 140 K is found to depend on the conformational state of the supporting OEG SAM surface. The rate is fast on the helical OEG SAMs and slow on the corresponding all-trans SAMs. This difference in kinetics is most likely due to a pronounced D2O interpenetration and binding to the all-trans segments of the ethylene glycol portion of the SAM. No such penetration and binding was observed on the helical OEG SAM.     

In vitro stability study of organosilane self-assemble monolayers and multilayers

The stability of self-assembled monolayers (SAMs) and multilayers formed on silicon surface by amino-terminated silanes and SAMs formed by alkyl and glycidyl terminated silanes were investigated in vitro with saline solution at 37 degrees C for up to 10 days. FTIR and XPS results indicated that amino-terminated SAMs and multilayers are very unstable if the alkyl chain is short ((CH2)3), while stable if the alkyl chain is long ((CH2)11). On the other hand, alkyl-terminated SAMs are very stable regardless of the alkyl chain length, and glycidyl terminated SAM retained approximately 77% of the organosilane molecules after 10 days. Hydrogen bonding between the organosilane monomer and silicon surface and among the organosilane monomers is believed to contribute to the instability of the SAM and multilayer formed by amino-terminated silane with a short alkyl chain ((CH2)3). Therefore, the widely used (3-aminopropyl) trimethoxysilane (APTMS) SAM and multilayer may not be suitable for implantable biomedical applications.     

Water penetration of damaged self-assembled monolayers

The interaction of water with self-assembled monolayers (SAMs) on amorphous silica is investigated using classical molecular dynamics simulation. Damage is induced through shear simulations with model atomic force microscopy (AFM) tips and separately with controlled extraction. We find that SAM coatings that have been slightly damaged (by normal loads close to 10 nN from a 10-nm-diameter AFM tip) are susceptible to water penetration and migration to the underlying hydrophilic substrate. The controlled damage studies indicate that the presence of water tends to heal damage below a threshold radius and exploits and magnifies damage above this threshold. For the systems studied here, Si(OH)3(CH2)10CH3 alkylsilane chains on amorphous silica, this threshold radius is between 0.5 and 1.0 nm.     

Computer simulation of adhesion between hydrophilic and hydrophobic self-assembled monolayers in water

The grand canonical Monte Carlo technique and atomistic force fields are used to calculate the force-distance relations and free energies of adhesion between carboxyl and methyl terminated alkanethiolate self-assembled monolayers (SAMs) in water. Both symmetric and asymmetric confinements are considered, as formed by like and unlike SAMs, respectively. As the confinement is increased, water confined by the hydrophobic methyl terminated SAMs experiences capillary evaporation. As a consequence, the adhesion energy is determined by the direct interaction between bare SAMs. In the asymmetric system, an incomplete capillary evaporation is observed, with the number of water molecules dropped by more than an order of magnitude. The remaining water molecules are all adsorbed on the hydrophilic SAM, while the hydrophobic SAM is separated from the rest of the system by a thin vapor layer. The calculated free energies of adhesion are in acceptable agreement with experiment.     

First-principle DFT and MP2 modeling of infrared reflection-absorption spectra of oriented helical ethylene glycol oligomers

First-principle modeling is used to obtain a comprehensive understanding of infrared reflection absorption (RA) spectra of helical oligo(ethylene glycol) (OEG) containing self-assembled monolayers (SAMs). Highly ordered SAMs of methyl-terminated 1-thiaoligo(ethylene glycols) [HS(CH2CH2O)(n)CH3, n = 5, 6] on gold recently became accessible for systematic infrared analyses [Vanderah et al., Langmuir, 2003, 19, 3752]. We utilized the quoted experimental data to validate the first-principle modeling of infrared RA spectra of HS(CH2CH2O)(5,6)CH3 obtained by (i) DFT methods with gradient corrections (using different basis sets, including 6-311++G) and (ii) HF method followed by a M?ller-Plesset (MP2) correlation energy correction. In focus are fundamental modes in the fingerprint and CH-stretching regions. The frequencies and relative intensities in the calculated spectra for a single molecule are unambiguously identified with the bands observed in the experimental RA spectra of the corresponding SAMs. In addition to confirming our earlier assignment of the dominating peak in the CH-stretching region to CH2 asymmetric stretching vibrations, all other spectral features observed in that region have received an interpretation consistent (but not in all cases coinciding) with previous investigations. The obtained results provide an improved understanding of the orientation and conformation of the molecular building blocks within OEG-containing assemblies, which, in our opinion, is crucial for being able to predict the folding and phase characteristics and interaction of OEG-SAMs with water and proteins.     

Factors that determine the protein resistance of oligoether self-assembled monolayers --internal hydrophilicity,terminal hydrophilicity,and lateral packing density

Protein resistance of oligoether self-assembled monolayers (SAMs) on gold and silver surfaces has been investigated systematically to elucidate structural factors that determine whether a SAM will be able to resist protein adsorption. Oligo(ethylene glycol) (OEG)-, oligo(propylene glycol)-, and oligo(trimethylene glycol)-terminated alkanethiols with different chain lengths and alkyl termination were synthesized as monolayer constituents. The packing density and chemical composition of the SAMs were examined by XPS spectroscopy; the terminal hydrophilicity was characterized by contact angle measurements. IRRAS spectroscopy gave information about the chain conformation of specific monolayers; the amount of adsorbed protein as compared to alkanethiol monolayers was determined by ellipsometry. We found several factors that in combination or by themselves suppress the protein resistance of oligoether monolayers. Monolayers with a hydrophobic interior, such as those containing oligo(propylene glycol), show no protein resistance. The lateral compression of oligo(ethylene glycol) monolayers on silver generates more highly ordered monolayers and may cause decreased protein resistance, but does not necessarily lead to an all-trans chain conformation of the OEG moieties. Water contact angles higher than 70 degrees on gold or 65 degrees on silver reduce full protein resistance. We conclude that both internal and terminal hydrophilicity favor the protein resistance of an oligoether monolayer. It is suggested that the penetration of water molecules in the interior of the SAM is a necessary prerequisite for protein resistance. We discuss and summarize the various factors which are critical for the functionality of "inert" organic films.     

Protein adsorption on oligo(ethylene glycol)-terminated alkanethiolate self-assembled monolayers: The molecular basis for nonfouling behavior

A study of protein resistance of oligo(ethylene glycol) (OEG), HS(CH2)11(OCH2CH2)nOH (n = 2, 4, and 6), self-assembled monolayers (SAMs) on Au(111) surfaces is presented here. Hydroxyl-terminated OEG-SAMs are chosen to avoid the hydrophobic effect observed with methyl-terminated OEG-SAMs, particularly at high packing densities. The structure of the OEG-SAM surfaces is controlled by adjusting the assembly solvent. These SAMs were characterized by X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM). Protein adsorption on these surfaces was investigated by surface plasmon resonance (SPR). OEG-SAMs assembled from mixed ethanol and water solutions show higher packing density on gold than those from pure ethanol solution. For EG2OH- and EG4OH-SAMs, proteins (i.e., fibrinogen and lysozyme) adsorb more on the densely packed SAMs prepared from mixed ethanol and water solutions, while EG6OH-SAMs generally resist protein adsorption regardless of the assembly solvent used.     

Dynamics of the interaction of vapor-deposited copper with alkanethiolate monolayers: bond insertion, complexation, and penetration pathways

We have investigated the interaction of vapor-deposited copper with -CH3, -OH, -OCH3, -COOH, and -CO2CH3 terminated alkanethiolate self-assembled monolayers (SAMs) adsorbed on polycrystalline Au using time-of-flight secondary ion mass spectrometry and density functional theory calculations. For -OH, -COOH, and -CO2CH3 terminated SAMs measurements indicate that for all copper coverages there is a competition between Cu atom bond insertion into C-O bonds, stabilization at the SAM/vacuum interface, and penetration to the Au/S interface. In contrast, on a -OCH3 terminated SAM Cu only weakly interacts with the methoxy group and penetrates to the Au substrate, while for a -CH3 terminated SAM deposited copper only penetrates to the Au/S interface. The insertion of copper into C-O terminal group bonds is an activated process. We estimate that the barriers for Cu insertion are 55 +/- 5 kJ mol(-1) for the ester, 50 +/- 5 kJ mol(-1) for the acid, and 55 +/- 5 kJ mol(-1) for the hydroxyl terminated SAMs. The activation barrier for the copper insertion is much higher for the -OCH3 SAM. Copper atoms with energies lower than the activation barrier partition between complexation (weak interaction) with the terminal groups and penetration through the monolayer to the Au/S interface. Weakly stabilized copper atoms at the SAM/vacuum interface slowly penetrate through the monolayer. In contrast to the case of Al deposition, C-O bond insertion is favored over C=O, C-H, and C-C bond insertion.     

Oxidation of organic films by beams of hydroxyl radicals

We have studied the oxidation of self-assembled monolayers (SAMs) of alkanes and alkenes with a thermal beam of OH radicals. The target films were produced by bonding alkane thiols and alkene thiols to a gold surface and the SAMs are mounted in a vacuum chamber at a base pressure of 10-9 Torr. Hydroxyl radicals were produced by a corona discharge in an Ar/H2O2/water mixture. The resultant molecular beam was scanned by an electrostatic hexapole and the OH radicals [4 (+/- 1) x 1011 OH radicals cm-2 sec-1] were focused onto the target SAM. All of the hydroxyl radicals impinging on the SAM surface are rotationally (J' ' 相似文献   

Thermal study of accumulation of conformational disorders in the self-assembled monolayers of C8 and C18 alkanethiols on the Au111 surface

The thermal stability of short alkanethiol CH(3)(CH(2))(7)SH (C(8)) and long C(18) self-assembled monolayers (SAMs) is investigated using grazing angle reflection-absorption infrared spectroscopy, cyclic voltammetry, and molecular dynamics simulation. We track the disordering of SAM by untilting and gauche defect accumulation with increasing temperature in the 300-440 K range, a range of interest to tribology. Molecular dynamics simulation with both fully covered and partially covered C(6), C(8), and C(18) monolayers brings out the morphological changes in the SAM, which may be associated with the observed thermal stability characteristics. The molecular dynamics simulations reveal that short-chain C(6) and C(8) alkanethiols are more defective at lower temperature than the long-chain C(18) alkanethiol. With increasing temperature disorder in the SAM, as reflected in both untilting and gauche defect accumulation, tends to saturate at temperatures below 360 K for short-chain SAMs such that any further increase in temperature, until desorption, does not lead to any significant change in conformational order. In contrast the disorder in the long-chain C(18) SAM increases monotonically with temperature beyond 360 K. Thus, in a practical range of temperature, the ability of a SAM to retain order with increasing thermal perturbations is governed by the state of disorder prior to heat treatment. This deduction derived from molecular dynamics simulation helps to rationalize the significant difference we have observed experimentally between the thermal response of short- and long-chain thiol molecules.     

Ac voltammetric and square wave voltammetric study of the self-assembled monolayers of thiol-functionalized viologen derivative

Electroactive self-assembled monolayers (SAMs) containing viologeu group are formed through the adsorption of thiol-functionalized viologen compound CH3(CH2)9V2+(CH2)8SH,where V2+ is N,N'-diaIkylbipyridinium (i.e.a viologen group),onto gold electrodes from methanol/water solution and its electrochemical behavior is investigated by Ac voltammetry and square wave voltam-metry,which have the high sensitivity against background charging.The viologen SAM formed is a sub-monolayer and the normal potentials corresponding to the two successive one-electron transfer processes of the active centers (viologen) are-360 mV and-750 mV (vs.Ag/AgCl) in 0.1mol/L phosphate buffer solutions (pH 6.96) respectively,and the standard electron transfer rate constant is 9.0s-1 The electrochemical behavior of this SAM in various solutions has been preliminarily discussed.     

Packing density of HS(CH2)(n)COOH self-assembled monolayers

Self-assembled monolayers (SAMs) of HS(CH(2))(n)COOH, n = 5, 10, 15 deposited from ethanol solution onto gold are prepared by five approaches, and their packing densities are evaluated by X-ray photoelectron spectroscopy (XPS) measurements. The five approaches are: (1) direct deposition; (2) acetic-acid-assisted deposition; (3) butyl-amine-assisted deposition; (4) displacement of a preformed HS(CH(2))(n)CH(3) (n = 5, 10, 15) SAMs; and (5) co-deposition with HS(CH(2))(n)CH(3) (n = 5, 10, 15). Packing density metrics are calculated from measurements of SAM and substrate photoemission intensities and their attenuations by two methods. In one case the attenuated photoemissions are expressed as a ratio relative to comparable measurements on an experimental HS(CH(2))(n)CH(3) model system. In the other case a new method is introduced where a calculated attenuation based on theoretical random coil and extended chain models is used as the reference to determine a packing density fraction. Packing densities are also correlated with the S2p(Au-bonded):Au4f peak area ratios and with shifts in the C1s binding energies. SAMs prepared by the direct deposition are a partial multilayer where a second molecular layer is physisorbed onto the SAM and not removable by solvent washing. The addition of acetic acid to the deposition solution disrupts dimer associations of HS(CH(2))(n)COOH in solution and at the surface of the monolayer and yields the most ordered monolayer with the highest density of -COOH groups. The addition of butyl amine results in a labile ammonium carbonate ion pair formation but results in a lower packing density in the SAM. The displacement of the preformed HS(CH(2))(n)CH(3) SAM and the co-deposition of HS(CH(2))(n)CH(3) with HS(CH(2))(n)COOH result in SAMs with little incorporation of the -COOH component.     

末端硫醇化的甲氧基聚乙二醇分子自组装膜电极对碘离子的电化学分析研究

碘离子的测量方法有化学法和电化学方法等多种,电化学方法有离子选择性电极、阴极溶出伏安法等［１,２］,但以上方法易受共存离子的干扰．自组装膜修饰电极具有分子识别功能,因而可用于特定物质的检测［３］．末端硫醇化的聚乙二醇分子在金电极表面形成自组装膜后具有分子识别特性［４］,碘离子和聚乙二醇膜有较好的相容性,可以进入膜内进而到达电极表面进行反应,而其它干扰离子较难进入．因而,该膜电极能用于碘离子测定,检测下限低,并具有较强的抗干扰能力．１　实验部分１．１　试剂及仪器　甲氧基聚乙二醇（ＭＷ＝５０００）等…     

In-situ characterization of self-assembled monolayers of water-soluble oligo(ethylene oxide) compounds

In-situ spectroscopic ellipsometry (SE) was utilized to examine the formation of the self-assembled monolayers (SAMs) of the water-soluble oligo(ethylene oxide) [OEO] disulfide [S(CH(2)CH(2)O)(6)CH(3)](2) {[S(EO)(6)](2)} and two analogous thiols - HS(CH(2)CH(2)O)(6)CH(3) {(EO)(6)} and HS(CH(2))(3)O(CH(2)CH(2)O)(5)CH(3) {C(3)(EO)(5)} - on Au from aqueous solutions. Kinetic data for all compounds follow simple Langmuirian models with the disulfide reaching a self-limiting final state (d=1.2nm) more rapidly than the full coverage final states of the thiol analogs (d=2.0nm). The in-situ ellipsometric thicknesses of all compounds were found to be nearly identical to earlier ex-situ ellipsometric measurements suggesting similar surface coverages and structural models in air and under water. Exposure to bovine serum albumin (BSA) shows the self-limiting (d=1.2nm) [S(EO)(6)](2) SAMs to be the most highly protein resistant surfaces relative to bare Au and completely-formed SAMs of the two analogous thiols and octadecanethiol (ODT). When challenged with up to near physiological levels of BSA (2.5mg/mL), protein adsorption on the final state [S(EO)(6)](2) SAM was only 3% of that which adsorbed to the bare Au and ODT SAMs.