Efficient blue-emitting Ir(III) complexes with phosphine carbanion-based ancillary ligand: a DFT study

We report a theoretical study on a series of heteroleptic cyclometalated Ir(III) complexes for OLED application. The geometries, electronic structures, and the lowest-lying singlet absorptions and triplet emissions of [(fppy)(2)Ir(III)(PPh(2)Np)] (1), and theoretically designed models [(fppy)(2)Ir(III)(PH(2)Np)] (2) and [(fppy)(2)Ir(III)Np](-)(3) were investigated with density functional theory (DFT)-based approaches, where, fppyH = 4-fluorophenyl-pyridine and NpH = naphthalene. The ground and excited states were, respectively, optimized at the M062X/LanL2DZ;6-31G* and CIS/LanL2DZ:6-31G* level of theory within CH(2)Cl(2) solution provided by PCM. The lowest absorptions and emissions were evaluated at M062X/Stuttgart;cc-pVTZ;cc-pVDZ level of theory. Though the lowest absorptions and emissions were all attributed as the ligand-based charge-transfer transition with slight metal-to-ligand charge-transfer transition character, the subtle differences in geometries and electronic structures result in the different quantum yields and versatile emission color. The newly designed molecular 3 is expected to be highly emissive in deep blue region.     

Green chemiluminescence from a bis-cyclometalated iridium(III) complex with an ancillary bathophenanthroline disulfonate ligand

The reaction of a fluorinated iridium complex with cerium(IV) and organic reducing agents generates an intense emission with a significant hypsochromic shift compared to contemporary chemically-initiated luminescence from metal complexes.     

Color tuning associated with heteroleptic cyclometalated Ir(III) complexes: influence of the ancillary ligand

We report the preparation of a series of new heteroleptic Ir(III) metal complexes chelated by two cyclometalated 1-(2,4-difluorophenyl)pyrazole ligands (dfpz)H and a third ancillary bidentate ligand (L=X). Such an intricate design lies in a core concept that the cyclometalated dfpz ligands always warrant a greater pi pi* gap in these series of iridium complexes. Accordingly, the lowest one-electron excitation would accommodate the pi* orbital of the ancillary L=X ligands, the functionalization of which is then exploited to fine-tune the phosphorescent emission wavelengths. Amongst the L=X ligands designed, three classes (series 1-3) can be categorized, and remarkable bathochromic shifts of phosphorescence were observed by (i) replacing the 2-benzoxazol-2-yl substituent (1a) with the 2-benzothiazol-2-yl group (1b) in the phenolate complexes, (ii) converting the pyridyl group (2a) to the pyrazolyl group (2b) and even to the isoquinolyl group (2c) in the pyrazolate complexes and (iii) extending the pi-conjugation of the benzimidazolate ligand from 3a to 3b. Single-crystal X-ray diffraction study on complex [(dfpz)Ir(bzpz)] (2b) was conducted to confirm their general molecular architectures. Complex 2b was also used as a representative example for fabrication of multilayered, green-emitting phosphorescent OLEDs using the direct thermal evaporation technique.     

Cyclometalated Ir(III) complexes containing N-aryl picolinamide ancillary ligands

The reaction of the cyclometalated chloro-bridged iridium(III) dimer, [(ppy)₂ Ir(μ-Cl)]₂ (ppy - 2-phenyl pyridine) with N-aryl picolinamides (LH, LH-NO₂, LH-CH₃, LH-l, LH-F) resulted in the formation of neutral heteroleptic complexes [Ir(ppy)₂L] (1), [Ir(ppy)₂L-NO₂](2), [Ir(ppy)₂L-CH₃](3), [Ir(ppy)₂L-Cl](4) and [Ir(ppy)₂L-F] (5). These complexes contain a six-coordinate iridium with a 2C, 4N coordination environment. The N-aryl picolinamide ligands are deprotonated during complexation and the resulting amidates bind to iridium in a chelating manner (N, N). Optical spectroscopic studies revealed that the complexes 1-5 exhibited intense π→π^∗ absorptions in the ultraviolet region. In addition low energy transitions due to ¹MLCT, ¹LLCT and ³MLCT are also seen. The emission spectra of 1-5, upon excitation at 450 nm, show a single emission with a λ_max around 513 nm. The lifetimes of this emission are in between 7.4 and 9.6 μs while the quantum yields are quite high and range from 0.2 to 0.5. Based on density functional theory (DFT) calculations on 1 and 3, the three highest occupied orbitals are composed of ligand π orbitals mixed with Ir-d orbitals while the three lowest unoccupied orbitals are mostly π orbitals of the ligands. From the time dependent DFT calculations it is revealed that the lowest energy electronic singlet and triplet excitations are a mixture of MLCT and LLCT.     

Synthetic control of excited-state properties in cyclometalated Ir(III) complexes using ancillary ligands

The synthesis and photophysical characterization of a series of (N,C(2')-(2-para-tolylpyridyl))2 Ir(LL') [(tpy)2 Ir(LL')] (LL' = 2,4-pentanedionato (acac), bis(pyrazolyl)borate ligands and their analogues, diphosphine chelates and tert-butylisocyanide (CN-t-Bu)) are reported. A smaller series of [(dfppy)2 Ir(LL')] (dfppy = N,C(2')-2-(4',6'-difluorophenyl)pyridyl) complexes were also examined along with two previously reported compounds, (ppy)2 Ir(CN)2- and (ppy)2 Ir(NCS)2- (ppy = N,C(2')-2-phenylpyridyl). The (tpy)2 Ir(PPh2CH2)2 BPh2 and [(tpy)2 Ir(CN-t-Bu)2](CF3SO3) complexes have been structurally characterized by X-ray crystallography. The Ir-C(aryl) bond lengths in (tpy)2 Ir(CN-t-Bu)2+ (2.047(5) and 2.072(5) A) and (tpy)2 Ir(PPh2CH2)2 BPh2 (2.047(9) and 2.057(9) A) are longer than their counterparts in (tpy)2 Ir(acac) (1.982(6) and 1.985(7) A). Density functional theory calculations carried out on (ppy)2 Ir(CN-Me)2+ show that the highest occupied molecular orbital (HOMO) consists of a mixture of phenyl-pi and Ir-d orbitals, while the lowest unoccupied molecular orbital is localized primarily on the pyridyl-pi orbitals. Electrochemical analysis of the (tpy)2 Ir(LL') complexes shows that the reduction potentials are largely unaffected by variation in the ancillary ligand, whereas the oxidation potentials vary over a much wider range (as much as 400 mV between two different LL' ligands). Spectroscopic analysis of the cyclometalated Ir complexes reveals that the lowest energy excited state (T1) is a triplet ligand-centered state (3LC) on the cyclometalating ligand admixed with 1MLCT (MLCT = metal-to-ligand charge-transfer) character. The different ancillary ligands alter the 1MLCT state energy mainly by changing the HOMO energy. Destabilization of the 1MLCT state results in less 1MLCT character mixed into the T1 state, which in turn leads to an increase in the emission energy. The increase in emission energy leads to a linear decrease in ln(k(nr)) (k(nr) = nonradiative decay rate). Decreased 1MLCT character in the T1 state also increases the Huang-Rhys factors in the emission spectra, decreases the extinction coefficient of the T1 transition, and consequently decreases the radiative decay rates (k(r)). Overall, the luminescence quantum yields decline with increasing emission energies. A linear dependence of the radiative decay rate (k(r)) or extinction coefficient (epsilon) on (1/deltaE)2 has been demonstrated, where deltaE is the energy difference between the 1MLCT and 3LC transitions. A value of 200 cm(-1) for the spin-orbital coupling matrix element 3LC absolute value(H(SO)) 1MLCT of the (tpy)2 Ir(LL') complexes can be deduced from this linear relationship. The (fppy)2 Ir(LL') complexes with corresponding ancillary ligands display similar trends in excited-state properties.     

Influence of halogen atoms on a homologous series of bis-cyclometalated iridium(III) complexes

A series of homologous bis-cyclometalated iridium(III) complexes Ir(2,4-di-X-phenyl-pyridine)(2)(picolinate) (X = H, F, Cl, Br) HIrPic, FIrPic, ClIrPic, and BrIrPic has been synthesized and characterized by NMR, X-ray crystallography, UV-vis absorption and emission spectroscopy, and electrochemical methods. The addition of halogen substituents results in the emission being localized on the main cyclometalated ligand. In addition, halogen substitution induces a blue shift of the emission maxima, especially in the case of the fluoro-based analogue but less pronounced for chlorine and bromine substituents. Supported by ground and excited state theoretical calculations, we rationalized this effect in a simple manner by taking into account the σp and σm Hammett constants on both the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO) energy levels. Furthermore, in comparison with FIrPic and ClIrPic, the impact of the large bromine atom remarkably decreases the photoluminescence quantum yield of BrIrPic and switches the corresponding lifetime from mono to biexponential decay. We performed theoretical calculations based on linear-response time-dependent density functional theory (LR-TDDFT) including spin-orbit coupling (SOC), and unrestricted DFT (U-DFT) to obtain information about the absorption and emission processes and to gain insight into the reasons behind this remarkable change in photophysical properties along the homologous series of complexes. According to theoretical geometries for the lowest triplet state, the large halogen substituents contribute to sizable distortions of specific phenylpyridine ligands for ClIrPic and BrIrPic, which are likely to play a role in the emissive and nonradiative properties when coupled with the heavy-atom effect.     

Effects of electron-rich ancillary ligands on green and yellow-emitting bis-cyclometalated iridium complexes

Abstract

Six new green to yellow-emitting heteroleptic bis-cyclometalated iridium(III) complexes of the type Ir(C?N)₂(L?X) (C?N?=?cyclometalating ligand, L?X?=?monoanionic chelating ancillary ligand) bearing two widely used cyclometalating ligands (C?N?=?2-(2-thienyl)pyridine (thpy) and 2-phenylbenzoxazole (bo)) and six different ancillary ligands were prepared. In this study, the complexes include structurally diverse ancillary ligands that allow us to investigate several aspects of structure-property relationships. Ancillary ligands used in this study are small-bite-angle N-phenylacetamidate (paa), N-isopropylbenzamidate (ipba) and N,N′-diisopropylbenzamidinate (dipba), and larger bite-angle β-ketoiminate (acNac), β-diketiminate (NacNac), and β-thioketoiminate (SacNac). The emission color is governed by the choice of the cyclometalating ligand, but the ancillary ligands influence the electrochemical and photophysical properties. Electrochemical analysis shows that the energy of the HOMO varies substantially as the L?X structure is altered, whereas the energy of LUMO remains nearly constant. The emission maxima range from 537?nm to 590?nm, with solution quantum yields between 0.0094 and 0.60 and microsecond lifetimes. The results here reveal the ancillary ligands provide a channel to control redox properties and excited-state dynamics in cyclometalated iridium complexes that luminesce in the middle regions of the visible spectrum.     

Synthesis and characterization of green-emitting phosphorescent Ir(III) complexes based on phenyl benzimidazole ligand

Several new Ir(III) complexes with 2-(4-bromophenyl)-1H-benzo[d]imidazole or 2-(4-bromophenyl)- 1-methyl-benzo[d]imidazole ligands as cylcometalated ligand and acetylacetonate or picolinate as the ancillary ligand were synthesized and their structures and photophysical properties were characterized. HOMO and LUMO energy levels and the molecular structures of Ir(III) complexes were scrutinized by DFT calculations. The complexes exhibited green luminescence at the maximum emission peaks at ca 495–522 nm. The methyl group substituent and replacing of acetylacetonate with picolinate complex can enhance the complex thermal stability. HOMO energy levels of the complexes vary from –4.99 to –5.44 eV, the LUMO energy levels are between –1.52 and –1.97 eV.     

Bright blue phosphorescence from cationic bis-cyclometalated iridium(III) isocyanide complexes

We report new bis-cyclometalated cationic iridium(III) complexes [(C(^)N)(2)Ir(CN-tert-Bu)(2)](CF(3)SO(3)) that have tert-butyl isocyanides as neutral auxiliary ligands and 2-phenylpyridine or 2-(4'-fluorophenyl)-R-pyridines (where R is 4-methoxy, 4-tert-butyl, or5-trifluoromethyl) as C(^)N ligands. The complexes are white or pale yellow solids that show irreversible reduction and oxidation processes and have a large electrochemical gap of 3.58-3.83 V. They emit blue or blue-green phosphorescence in liquid/solid solutions from a cyclometalating-ligand-centered excited state. Their emission spectra show vibronic structure with the highest-energy luminescence peak at 440-459 nm. The corresponding quantum yields and observed excited-state lifetimes are up to 76% and 46 μs, respectively, and the calculated radiative lifetimes are in the range of 46-82 μs. In solution, the photophysical properties of the complexes are solvent-independent, and their emission color is tuned by variation of the substituents in the cyclometalating ligand. For most of the complexes, an emission color red shift occurs in going from solution to neat solids. However, the shift is minimal for the complexes with bulky tert-butyl or trifluoromethyl groups on the cyclometalating ligands that prevent aggregation. We report the first example of an iridium(III) isocyanide complex that emits blue phosphorescence not only in solution but also as a neat solid.     

2-mercapto-5-methyl-1,3,4-thiadiazole as a ligand in Ru(III), Rh(III), Os(III) and Ir(III) trichloride complexes

Some 2-mercapto-5-methyl-1,3,4-thiadiazole complexes of Rh(III), Ir(III), Ru(III) and Os(III) have been prepared and characterized by chemical-analysis, conductometric, room-temperature magnetic-moment, electronic, IR, EPR and thermogravimetric measurements. From the magnetic properties it was derived that the above ligand forms low-spin complexes with all the metal ions. The position and multiplicity of the metal-halogen stretching modes in the far-IR region have been investigated. The wavelengths of the principal electronic absorption peaks have been accounted for in terms of the crystal field theory and the various parameters have been calculated.     

Substituent effect on the luminescent properties of a series of deep blue emitting mixed ligand Ir(III) complexes

The syntheses of the bright deep blue emitting mixed ligand Ir(III) complexes comprising two cyclometalating, one phosphine and one cyano, ligands are reported. In this study, a firm connection between the nature of the excited states and the physicochemical behavior of the complexes with different ligand systems is elucidated by correlating the observed crystal structures, spectroscopic properties, and electrochemical properties with the theoretical results obtained by the density functional theory (DFT) methods. The cyclometalating ligands used here are the anions of 2-(4',6'-difluorophenyl)-pyridine (F2ppy), 2-(4',6'-difluorophenyl)-4-methyl pyridine (F2ppyM), and 4-amino-2-(4',6'-difluorophenyl)-pyridine (DMAF2ppy). The phosphine ligands are PhP(O-(CH2CH2O)3-CH3)2 and Ph2P(O-(CH2CH2O)n-CH3), where Ph = phenyl and n = 1 (P1), 3 (P3), or 8 (P350). The thermal stabilities of the complexes were enhanced upon increasing the "n" value. The crystal structures of the complexes, [(DMAF2ppy)2Ir(P1)CN], (P1)DMA, and [(F2ppyM)2Ir(P3)CN], (P3)F2M, show the cyano and phosphine groups being in a cis configuration to each other and in a trans configuration to the coordinating Cring atoms. The long Ir-Cring bond lengths are ascribed to the trans effect of the strong phosphine and cyano ligands. DFT calculations indicate that the highest occupied molecular orbital (HOMO) is mainly contributed from the d-orbitals of the iridium atom and the pi-orbitals of cyclometalating and cyano ligands, whereas the lowest unoccupied molecular orbital (LUMO) spreads over only one of the cyclometalating ligands, with no contribution from phosphine ligands to both frontier orbitals. Dimethylamino substitution increases the energy of the emitting state that has more metal-to-ligand-charge-transfer (MLCT) character evidenced by the smaller vibronic progressions, smaller difference in the 1MLCT and 3MLCT absorption wavelengths, and higher extinction coefficients (epsilon) than the F2ppy and F2ppyM complexes. However, the increase in the basicity of the dimethylamino group in the DMAF2ppy complexes in the excited states leads to distortions and consequent nonradiative depopulation of the excited states, decreasing their lower photoluminescence (PL) efficiency. The effect of the substituents in the phosphine ligand is more pronounced in the electroluminescence (EL) than in the PL properties. Multilayer organic light emitting devices (OLEDs) are fabricated by doping the Ir(III) complexes in a blend of mCP (m-bis(N-carbazolyl benzene)) and polystyrene, and their device characteristics are studied. The (P3)F2M complex shows a maximum external quantum efficiency (etaex) of 2%, a maximum luminance efficiency (etaL) of 4.13 cd/A at 0.04 mA/cm2, and a maximum brightness of 7200 cd/m2 with a shift of the Commission Internationale de L'Eclairage (CIE) coordinates from (0.14, 0.15) in film PL to (0.19, 0.34) in EL.     

Interaction of a bulky N-heterocyclic carbene ligand with Rh(I) and Ir(I). Double C-H activation and isolation of bare 14-electron Rh(III) and Ir(III) complexes

Reactivity and structural studies of unusual rhodium and iridium systems bearing two N-heterocyclic carbene (NHC) ligands are presented. These systems are capable of intramolecular C-H bond activation and lead to coordinatively unsaturated 16-electron complexes. The resulting complexes can be further unsaturated by simple halide abstraction, leading to 14-electron species bearing an all-carbon environment. Saturation of the vacant sites in the 16- and 14-electron complexes with carbon monoxide permits a structural comparison. DFT calculations show that these electrophilic metal centers are stabilized by pi-donation of the NHC ligands.     

Half-sandwich Ru(II), Ir(III) and Rh(III) complexes with bridging or chelating N-heterocyclic bis-carbene ligand: Synthesis and characterization

N-heterocyclic bis-carbene ligand (bis-NHC) which was derived from 1,1′-diisopropyl-3,3′-ethylenediimidazolium dibromide (L·2HBr) via silver carbene transfer method, reacted with [(η⁶-p-cymene)RuCl₂]₂ and [Cp^∗MCl₂]₂ (Cp^∗ = η⁵-C₅Me_5, M = Ir, Rh) respectively, afforded complexes [(η⁶-p-cymene)RuCl₂]₂(L) (1), [Cp^∗IrCl₂]₂(L) (2) and [Cp^∗RhCl(L)][Cp^∗RhCl₃] (3). When [Cp^∗IrCl₂]₂ was treated with 2 equiv AgOTf at first, and then reacted with bis-NHC ligand, [Cp^∗IrCl(L)]OTf (4) was obtained. The molecular structures of complexes 1-4 were determined by X-ray single crystal analysis, showing that 1 and 2 adopted bridging coordination mode, 3 and 4 adopted chelating coordination mode. All of these complexes were characterized by ¹H, ¹³C NMR spectroscopy and element analysis.     

Formation and reactivity of Ir(III) hydroxycarbonyl complexes

Kinetic studies show that the reaction of [TpIr(CO)2] (1, Tp = hydrotris(pyrazolyl)borate) with water to give [TpIr(CO2H)(CO)H] (2) is second order (k = 1.65 x 10(-4) dm(3) mol(-1) s(-1), 25 degrees C, MeCN) with activation parameters DeltaH++= 46+/-2 kJ mol(-1) and DeltaS++ = -162+/-5 J K(-1) mol(-1). A kinetic isotope effect of k(H2O)/k(D2O) = 1.40 at 20 degrees C indicates that O-H/D bond cleavage is involved in the rate-determining step. Despite being more electron rich than 1, [Tp*Ir(CO)2] (1*, Tp* = hydrotris(3,5-dimethylpyrazolyl)borate) reacts rapidly with adventitious water to give [Tp*Ir(CO2H)(CO)H] (2*). A proposed mechanism consistent with the relative reactivity of 1 and 1* involves initial protonation of Ir(I) followed by nucleophilic attack on a carbonyl ligand. An X-ray crystal structure of 2* shows dimer formation via pairwise H-bonding interactions of hydroxycarbonyl ligands (r(O...O) 2.65 A). Complex 2* is thermally stable but (like 2) is amphoteric, undergoing dehydroxylation with acid to give [Tp*Ir(CO)2H]+ (3*) and decarboxylation with OH- to give [TpIr(CO)H2] (4*). Complex 2 undergoes thermal decarboxylation above ca. 50 degrees C to give [TpIr(CO)H2] (4) in a first-order process with activation parameters DeltaH++ = 115+/-4 kJ mol(-1) and DeltaS++ = 60+/-10 J K(-1) mol(-1).     

Synthesis of stable monoporphyrinate lanthanide(III) complexes without ancillary ligands

A new type of porphyrin ligand bearing four triazole groups at the ortho-positions of phenyl rings in tetraphenylporphyrin was synthesized for the formation of monoporphyrinate lanthanide complexes without ancillary ligands.     

Pure red electrophosphorescence from polymer light-emitting diodes doped with highly emissive bis-cyclometalated iridium(III) complexes

In order to develop highly emissive red phosphorescent materials for OLED application, novel bis-cyclometalated iridium(III) complexes were developed using the 1-(dibenzo[b,d]furan-4-yl)isoquinolinato-N,C^3′ (dbfiq) cyclometalating ligand. When 1,3-bis(3,4-dibutoxyphenyl)propane-1,3-dionate (bdbp) is employed as an ancillary ligand, Ir(dbfiq)₂(bdbp) 1 exhibits red photoluminescence (PL) at 640 nm with a quantum yield (Φ_PL) of 0.61 (in toluene, 298 K). Replacement of bdbp to dipivaloylmethanate (dpm) and acetylacetonate (acac) (Ir(dbfiq)₂(dpm) 2 and Ir(dbfiq)₂(acac) 3, respectively) does not affect the PL spectrum, but reduces Φ_PL to 0.55 and 0.49 for 2 and 3, respectively. Similar tendency is also found in the doped poly(methyl methacrylate) (PMMA) film, and 1 is more emissive (Φ_PL = 0.17) than 2 and 3 (Φ_PL = 0.08 and 0.06, respectively). Using 1 as a phosphorescent dopant, polymer light-emitting diodes (PLEDs) were fabricated, of which structure was ITO/PEDOT:PSS (40 nm)/PVCz:1:PBD (100 nm)/CsF (1 nm)/Al (250 nm). Pure red electroluminescence (EL) is obtained from the fabricated PLEDs, affording a CIE chromaticity coordinate of (0.68, 0.31). When 0.51 mol% of 1 is incorporated in the PVCz-based emitting layer, the PLED shows maximum luminance of 7270 cd m⁻² at 16.5 V, power efficiency of 1.4 lm W⁻¹ at 7.5 V, and external quantum efficiency of 6.4% at 9.0 V. PLEDs with the same structure and components were also fabricated using 2 and 3, and their device characteristics were investigated. In proportion to the PL quantum yields, 1 affords better device performance than 2 and 3. Owing to four butoxy groups introduced to the bdbp ligand, 1 exhibits high solubility in organic solvents such as chloroform and toluene, and thus, is an excellent red phosphorescent dopant for solution-processed OLEDs.     

Luminescence mechanochromism in cyclometallated Ir(III) complexes containing picolylamine

The synthesis, crystal structure and luminescence properties of three cyclometalated Ir(III) complexes of general formula [(ppy)(2)Ir(pam)]X, where X = Cl(-) (1), PF(6)(-) (2), ClO(4)(-)(3), and pam = 2-picolylamine, are described. While 2 and 3 crystallize in a unique form, two pseudo-polymorphs, a solvated (1a) and a non-solvated (1b) species, have been observed for compound 1. 1a crystallizes in the monoclinic centrosymmetric space group P2(1)/c. On the contrary, 1b, 2 and 3 crystallize in the non-centrosymmetric space group P2(1)2(1)2(1) (1b) and Pca2(1) (2 and 3), respectively. All the crystalline supramolecular materials have been fully photophysically characterized. While 1 shows a bright blue-green emission in both solution and solvated crystalline state 1a, crystals of 1b, 2 and 3 show a significantly red shifted emission with respect to solution. Unexpectedly, and differently from 1a, mechanical stimuli-responsive colour and luminescence changes have been observed for 1b, 2 and 3. Upon mechanical grinding the colour of the crystalline solids changes from orange to yellow while the emission energy is partially (2 and 3) or completely (1b) converted from orange to green. The grinding-triggered colour and luminescence changes have been attributed to a crystal-to-amorphous phase conversion for all crystalline solids.     

Bis-cyclometalated Ir(III) complexes as efficient singlet oxygen sensitizers

We report the singlet oxygen sensitization properties of a series of bis-cyclometalated Ir(III) complexes (i.e., (bt)2Ir(acac), (bsn)2Ir(acac), and (pq)2Ir(acac); bt = 2-phenylbenzothiazole, bsn = 2-(1-naphthyl)benzothiazole, pq = 2-phenylquinoline, and acac = acetylacetonate). Complexes with acetylacetonate ancillary ligands give singlet oxygen quantum yields near unity (PhiDelta = (0.7-1.0) +/- 0.1), whether exciting the ligand-based state or the lowest energy excited state (MLCT + 3LC). The singlet oxygen quenching rates for these beta-diketonate complexes were found to be small [(5 +/- 2) x 105 to (6 +/- 0.2) x 106 M-1 s-1], roughly 3 orders of magnitude slower than the corresponding phosphorescence quenching rate. Similar complexes were prepared with glycine or pyridine tethered to the Ir(III) center (i.e., (bsn)2Ir(gly) and (bt)2Ir(py)Cl; gly = glycine and py = pyridine). The glycine and pyridine derivatives give high singlet oxygen yields (PhiDelta = (0.7-1.0) +/- 0.1).     

Spectroscopic and physico-chemical characterization of Ir(I) and Ru(III) complexes of 32-membered unsymmetrical dinucleating macrocyclic ligand

Reactions of the macrocyclic ligand [L·2HClO₄] with the reactants [Ir(CO)(Ph₃P)₂Cl] and [RuCl₃(AsPh₃)₂CH₃OH], produces bimetallic complexes with the stoichiometries [Ir₂L(Ph₃P)₂Cl(ClO₄)] (I) and [Ru₂LCl₄(ClO₄)₂] (II), respectively. Physico-chemical and spectroscopic data of the complexes confirms the encapsulation of two metal ions in the macrocyclic cavities via coordination through nitrogen atoms of the unsymmetrical aza groups, which results in homo-dinuclear macrocyclic complexes. The macrocyclic ligand has accommodated both the lower, Ir(I), and higher, Ru(III), oxidation states of metal ions, which shows the flexible nature and capability of macrocycle to form stable complexes. The mode of bonding and geometry of the complexes have been established on the basis of FT-IR, NMR, ligand field spectral, magnetic susceptibility and conductivity measurements. The thermodynamic first ionic association constants (K₁), corresponding free energy change (ΔG) and other related parameters from conductometric studies using the Fuoss and Edelson method of complexes in DMSO have been determined and discussed.     

Tuning solid state luminescent properties in a hydrogen bonding-directed supramolecular assembly of bis-cyclometalated iridium(III) ethylenediamine complexes

Synthesis, crystal structural determination and photophysical properties of a series of heteroleptic cationic cyclometalated iridium(III) derivatives of general formula [(ppy)(2)Ir(en)]X (X = ClO(4)(-) (1), PF(6)(-) (2), Cl(-) (3), BPh(4)(-) (4)), are described. The assembly of the common molecular building block allows to get highly luminescent crystalline materials or to assemble poorly luminescent supramolecular channelled architectures, for which the additional contribution of oxygen quenching effects has been observed. Moreover, the high reproducibility of the preparations of the crystalline materials in their specific crystalline phases, makes the control of the supramolecular organization of photo-active iridium(III) complexes within the crystalline structures a useful synthetic procedure for the construction of highly luminescent materials.