新型长余辉发光材料SrMgSi2O6:Eu2+,Ln3+的制备及性质

采用凝胶-燃烧法合成了系列稀土离子掺杂的Sr0.94MgSi2O6:Eu0.022+,Ln0.043+(Ln=La,Ce,Nd,Sm,Gd,Dy)蓝色长余辉发光材料,用X射线粉末衍射(XRD)、扫描电镜(SEM)、荧光分光光度计等对合成产物进行了分析和表征.结果表明:掺杂了不同稀土离子的SrMgSi2O6:Eu2+,La3+的晶体结构均为网方品系结构;其激发、发射光谱的峰形、峰位基本无变化,激发光谱为一宽带,最大激发峰位于400 nm处,次激发峰佗于415 nm处,发射光谱也为一宽带,最大发射峰位于470 nm附近,是典型的Eu2+的4F5d_4f跃迁导致的,不同之处在于其激发光谱、发射光谱强度及余辉性质有所差别,其中Dy3+是最理想的共掺杂稀土离子,Sr0.94MgSi2O6:Eu0.022+Dy0.043+的余辉时间最长,可达4 h;而Sm3+最差,Sr0.94MgSi2O6:Eu0.022+,Sm0.043+的余辉亮度最低,余辉时间最短.     

纳米SrAl2O4:Eu2+,Dy3+长余辉发光材料的制备与性能

采用水热-均匀共沉淀法制备了纳米SrAl2O4:Eu2+,Dy3+长余辉发光材料.通过XRD、TEM、荧光光谱、热释光谱对其结构和性能进行分析.XRD结果表明所制备的SrAl2O4:Eu2+Dy3+纳米发光材料为单相,属单斜晶系.TEM测试表明纳米SrAl2O4:Eu2+,Dy3+发光材料为规则的球状粒子,粒径为50～80 nm,且分散性良好.激发和发射光谱测试表明,样品的激发光谱是峰值在356 nm 的连续宽带谱,发射光谱是峰值位于512 nm的宽带谱,与SrAl2O4:Eu2+,Dy3+粗晶材料相比,激发和发射光谱都出现了"蓝移"现象.样品的热释光峰值位于358 K,适合于产生长余辉.     

新型WLED荧光粉Ca2MgSi2O7:Ce3+,Eu2+的能量传递和光色研究

用高温固相法制备了 Ca2 MgSi2O7:Ce3+,Eu2,并研究其发光特性.Ce3+的发射带峰值位于410 nm,对应于Ce3+的5d→4f跃迁;Eu2+的发射带峰值位于530 nm,对应于Eu2+的5d→4f跃迁.双掺样品的发射光谱表明两种离子间存在高效的电偶极-电偶极能量传递.当Ce3+和Eu2浓度分别为2％和0.125％时,样品发射光谱(λex=360 nm)色坐标为(0.221,0.312),落在白光区.以上研究说明Ca2 MgSi2O7:Ce3+,Eu2+是一种适用于近紫外芯片的新型WLED荧光粉,其光色可调谐.     

Sr2SiO4:Eu3+发光材料的制备及其光谱特性

采用溶胶-凝胶法制备了Sr2SiO4:Eu3+发光材料. 测量了Sr2SiO4:Eu3+材料的激发与发射光谱, 发射光谱主峰位于618 nm处;监测618 nm发射峰时, 所得激发光谱主峰分别为320、397、464 和518 nm. 研究了Sr2SiO4:Eu3+材料在618 nm的主发射峰强度随Eu3+浓度的变化情况. 结果显示, 随Eu3+浓度的增大, 发射峰强度先增大; 当Eu3+浓度为7%时(x), 峰值强度最大; 而后随Eu3+浓度的增大, 峰值强度减小. 在Eu3+浓度为7%的情况下, 研究了电荷补偿剂Li+的掺杂浓度(x(Li+))对Sr2SiO4:Eu3+材料发射光谱强度的影响. 结果显示, 随x(Li+)的增大, 材料发射光谱强度先增大后减小, 当x(Li+)为8%时, 峰值强度最大.     

Ca10(Si2O7)3Cl2:Eu2+Mn2+单-基质白光荧光粉的发光性质

用高温固相法合成了颜色可调的Ca10(Si2O7)3Cl2:Eu2+Mn2+荧光粉.研究了它的发光性质和Eu2+与Mn2+之间的能量传递.Eu2+离子在Ca10(Si2O7)3Cl2晶体中形成了峰值为426 nm和523 nm的5d→4f跃迁发光,Eu2+中心向Mn2+中心传递能量,敏化Mn2+离子4T1(4G)-6A1(6S)跃迁而产生585 nm的黄光发射.黄绿蓝3个发射带叠加在单一基质中实现了白光发射.3个发射带的激发谱范围位于250-480 nm处,Ca10(Si2O7)3Cl2:Eu2+Mn2+在紫外-近紫外波段(350～410 nm)范围内有很强的激发,是一种适合InGaN管芯激发的单一基质白光LED荧光粉.     

KNaCa_2(PO_4)_2中Eu~(2+)的发光及Eu~(2+)对Mn~(2+)的能量传递

高温固相法合成了KNaCa2(PO4)2:Eu2+,Mn2+荧光粉,并探讨其发光性质和Eu2+-Mn2+间的能量传递。Eu2+的470 nm发射峰源于Eu2+的5d-4 f跃迁,最佳掺杂浓度为0.01 mol,Eu2+的激发峰位于400 nm,与UV-LED管芯的发射光谱(350~410 nm)匹配。Mn2+的565和618 nm的发射来自Mn2+的4T1(4G)-6A1(6S)跃迁。KNaCa2(PO4)2:0.01Eu2+,nMn2+系列样品中,随着Mn2+浓度的增加,Eu2+的发射峰逐渐降低,Mn2+的发射峰逐渐增强,Eu2+对Mn2+的发光有明显的敏化作用。根据D exter电多极相互作用能量传递公式,可得出Eu2+与Mn2+之间的能量传递归因于电偶极-电四极相互作用引起的共振能量传递。     

稀土钇掺杂Eu(TTA)3/PMMA温敏漆的制备及性能分析

本文以氯化铕、氯化钇、噻吩甲酰基三氟丙酮(TTA)为原料合成了钇掺杂Eu(TTA)3探针分子。将探针分子掺杂到聚甲基丙烯酸甲酯(PMMA)基质中,获得稀土钇掺杂Eu(TTA)3/PMMA温敏漆。采用IR、紫外吸收光谱和激发发射光谱对探针分子结构及温敏漆荧光特性进行了表征。红外光谱表明,稀土Eu(Y)与TTA形成配位键,且钇的掺入未改变Eu(TTA)3结构。紫外吸收光谱表明,探针分子的最佳吸收波段位于290~376 nm处。激发发射光谱表明,在340 nm激发下,温敏漆在614 nm处有最强发射峰,且钇对Eu(TTA)3发光具有增益作用,当钇含量为50%时,增益作用最强。不同温度下发射光谱表明,随着温度的升高,温敏漆的荧光发射强度逐渐减弱,说明温敏漆具有良好的温度猝灭特性,且掺入钇后温敏漆的测温灵敏度有所提高。     

Ga~(3+)对Eu~(2+)掺杂钡长石结构和发光特性的影响

在弱还原气氛下采用高温固相法制备Ba0.955A l2-xGaxS i2O8:Eu2+(x=0~1.0)系列荧光粉,研究Ga3+置换A l3+对晶体结构和光谱特性的影响。Ga3+与A l3+以类质同相替代进入BaA l2S i2O8晶格形成连续固溶体,晶胞参数a,b,c,β和晶胞体积V均随Ga3+置换量呈线性增加。宽带激发光谱,覆盖范围为230~400 nm,可拟合成4个峰,表观峰值位于330 nm,基本不随Ga3+置换量变化;随着Ga3+置换量的增加,半高宽从93 nm减小至83 nm。发射光谱位于375~560 nm,可由422和456 nm两峰拟合而成,表观峰值位于434 nm,两拟合峰峰位均随Ga3+置换量呈线性红移,且拟合峰强度比呈线性递减。     

Y2O2S:Eu,Ti,Mg的光谱性质和长时发光特性

研究了Ti, Mg, Eu等离子掺杂的Y2O2S材料的光谱性质和长时发光特性, 并发现了光致激发下Y2O2S∶Ti中峰值为594nm的宽带发射及长时发光现象. 根据发射光谱和衰减曲线的分析, 认为Ti掺杂后在Y2O2S晶体中形成施主能级, 有效地捕获离化的电子, 造成长时发光现象. 共掺入Mg进行电荷补偿可增强初始发光亮度和发光时间. 在红色长时发光材料Y2O2S∶Eu, Ti, Mg中, Eu3 作为发光中心, 接受被俘获的电子和空穴重新复合后释放的能量, 发射Eu3 的626和616 nm等特征光谱.     

纳米MgBO_2(OH):Eu~(3+)的制备及发光性能研究

利用水热法,制备得到了纳米线组装的绒球状和纳米带聚集的絮状Mg BO2(OH):Eu3+,对它们进行了EDS、XRD、IR、SEM等表征及发光性能研究。研究发现两个产品的最高激发峰和发射峰分别都位于λ=250nm和λ=615nm处,为红色发光材料;且发现绒球状Mg BO2(OH):Eu3+的峰强度明显强于絮状Mg BO2(OH):Eu3+,但絮状Mg BO2(OH):Eu3+的红橙比(R/O)更高。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.