Synthesis of new 3-arylindole-2-carboxylates using β,β-diaryldehydroamino acids as building blocks. Fluorescence studies

Several new methyl 3-arylindole-2-carboxylates were synthesized in high yields using a metal assisted [Pd(OAc)₂/Cu(OAc)₂, DMF, 130 °C] intramolecular C-N cyclization of β,β-diaryldehydroamino acids, developed by us, thus extending the scope of this reaction. The latter were obtained by a bis-Suzuki coupling of a β,β-dibromodehydroalanine with arylboronic acids bearing either electron-donating groups (EDGs) or electron-withdrawing groups (EWGs). We were able to establish general conditions for this coupling reaction [PdCl₂dppf·CH₂Cl₂ 1:1 (20 mol %), boronic acid (5 equiv), Cs₂CO₃ (1.4 equiv), THF/H₂O 1:1, 80 °C]. This strategy constitutes a novel, general and unprecedented approach to the synthesis of 3-arylindole-2-carboxylates. The fluorescence of the differently substituted indoles prepared was studied in several polar and non-polar solvents. In general the new indoles exhibit a solvent sensitive emission. The indoles with EDGs (OCH₃ and SCH₃) have reasonable fluorescence quantum yields in all solvents except in water. The indole with the cyano groups shows high fluorescent quantum yields in all solvents studied, despite the lower solvent sensitivity of its emission. The indole with the acetyl groups only exhibits reasonable fluorescence quantum yields in protic solvents. These studies show that the new 3-arylindole-2-carboxylates are good candidates to be used as fluorescent probes.     

Direct palladium-catalyzed C-3 alkynylation of indoles

The direct palladium-catalyzed coupling reaction of indoles with alkynyl bromides was described in this paper. In the presence of catalytic amount of PdCl₂(PPh₃)₂ and 2.0 equiv. NaOAc, the coupling reaction of indoles with alkynyl bromides proceeded smoothly at 50 °C to give the corresponding 3-alkynylindoles with high regioselectivity in good to excellent yields.     

3-(o-Trifluoroacetamidoaryl)-1-propargylic esters: common intermediates for the palladium-catalyzed synthesis of 2-aminomethyl-, 2-vinylic, and 2-alkylindoles

3-(o-Trifluoroacetamidoaryl)-1-propargylic esters have been used as common synthetic intermediates for the preparation of a variety of 3-unsubstituted 2-substituted indoles. Treating ethyl 3-(o-trifluoroacetamidoaryl)-1-propargylic carbonates unsubstituted or containing an aryl substituent at the propargylic carbon with piperazines and Pd(PPh₃)₄ in THF at 80 °C affords 2-(piperazin-1-ylmethyl)indoles in excellent yields. Good to excellent yields of 2-aminomethylindoles are also obtained with other secondary amines. Ethyl 3-(o-trifluoroacetamidoaryl)-1-propargylic carbonates bearing an alkyl substituent at the propargylic carbon and ethyl 3-(o-trifluoroacetamidoaryl)-1-propargylic acetates disubstituted at the propargylic carbon give 2-vinylic indoles with the Pd(OAc)₂/PPh₃ combination and Et₃N in THF at 80 °C. Formation of 2-vinylic indoles is quite stereoselective, generating trans vinylic derivatives, at least with the substrates that we have investigated. In the presence of formic acid, Et₃N, and Pd(PPh₃)₄ in MeCN at 80 °C, ethyl 3-(o-trifluoroacetamidoaryl)-1-propargylic carbonates afford 2-alkylindoles in good to excellent yields.     

Indium trichloride catalyzed three component one-pot route to 1-hydroxymethyl-3-aminomethyl indoles

A one-pot synthesis of 1-hydroxymethyl-3-aminomethyl indoles 3 could be achieved in excellent yield by reacting indoles 1 with formaldehyde and secondary amines 2 in the presence of molecular sieves (3 Å) and catalytic amount of InCl₃ (10 mol %) in 1,4-dioxane at room temperature for 3-5 h.     

Thorpe-Ingold effect in copper(II)-catalyzed formal hydroalkoxylation-hydroarylation reaction of alkynols with indoles

The use of Cu(OTf)₂ as a catalyst for tandem hydroalkoxylation-hydroarylation reaction of alkynes tethered with hydroxyl group is reported. The reaction proceeds at 60 °C or even at room temperature with 5 mol % catalyst loading and produces C-3-substituted indoles in good to high yields. The method was shown to be applicable to a broad range of indoles, containing electron-withdrawing and electron-donating substituents, and alkynol substrates bearing sterically demanding substituents in the tether. Interestingly, it was found that Thorpe-Ingold effect is operating for this cyclization reaction. Easy availability and low cost of Cu(OTf)₂ make this method attractive and amenable for large-scale synthesis compared to known literature methods.     

An FeCl3-catalyzed highly C3-selective Friedel-Crafts alkylation of indoles with alcohols

The FeCl₃-catalyzed C3-selective Friedel-Crafts alkylation of indoles using allylic, benzylic and propargylic alcohols has been developed. The reaction was performed in the presence of a catalytic amount of inexpensive anhydrous FeCl₃ (10 mol %) in nitromethane under mild conditions. This method can also be used for the alkylation of pyrrole.     

InBr3 as a versatile and highly efficient catalyst for the synthesis of 3-allyl- and 3-benzylindoles

Indoles undergo smooth alkylation with allylic and benzylic alcohols in the presence of 10 mol % of InBr₃ under mild conditions to produce 3-allyl- and 3-benzyl indoles, respectively, in excellent yields and with high selectivity. This is the first example of the alkylation of indoles with benzylic alcohols using InBr₃ as an acid catalyst.     

Palladium-free zinc-mediated hydroamination of alkynes: efficient synthesis of indoles from 2-akynylaniline derivatives

Reaction of 2-phenylethynyl N-tosylanilide prepared by Pd-free procedure with ZnBr₂ (3 equiv) in refluxing toluene gave N-tosyl-2-phenylindole in 93% yield. Treatment of 2-phenylethynylaniline with ZnBr₂ (1 equiv) in refluxing toluene resulted in the formation of 2-phenylindole in 91% yield. Catalytic ZnBr₂ (0.05 equiv) effectively reacted with 2-alkynylanilines to afford 2-substituted indoles in high yields. Thus, complete Pd-free zinc catalyzed hydroamination of 2-alkynylanilines was achieved.     

A highly active catalyst for the reductive cyclization of ortho-nitrostyrenes under mild conditions

A mild and efficient method for the palladium-catalyzed reductive cyclization of ortho-nitrostyrenes to afford indoles is reported. Treatment of ortho-nitrostyrenes with 0.1 mol% palladium (II) trifluoroacetate [Pd(TFA)₂] and 0.7 mol% 3,4,7,8-tetramethyl-1,10-phenanthroline (tm-phen) in DMF at 15 psig CO and 80 °C afforded indoles in good to excellent yields. When the reaction was conducted in toluene, the corresponding N-hydroxyindole was isolated. A mechanism that accounts for the formation of N-hydroxyindole is proposed.     

First example of FeCl3-catalyzed alkylation of indoles with pinenes

Indoles undergo smooth alkylation with α- and β-pinenes in the presence of 20 mol % of anhydrous FeCl₃ under mild reaction conditions to produce a wide range of the corresponding 3-alkylated indoles in excellent yields with high trans-selectivity. This is the first example of alkylation of indoles with mono-terpenes.     

First example of the C-alkylation of indoles with Baylis-Hillman acetates

Baylis-Hillman acetates undergo S_N2′ allylic substitution with indoles in the presence of 20 mol % of indium tribromide under mild conditions to afford a new class of substituted indoles in high yields with (E)-stereoselectivity. The stereochemistry of the products was assigned by various NMR experiments.     

FeCl3-catalyzed alkylation of indoles with 1,3-dicarbonyl compounds: an expedient synthesis of 3-substituted indoles

Indoles undergo smooth alkylation at the 3-position with 1,3-dicarbonyl compounds in the presence of 20 mol % of FeCl₃ under mild reaction conditions to produce a wide range of 3-substituted indoles in excellent yields and with high E-selectivity.     

Synthesis of 2,3-disubstituted benzofurans and indoles by π-Lewis acidic transition metal-catalyzed cyclization of ortho-alkynylphenyl O,O- and N,O-acetals

The PtCl₂-catalyzed cyclization reaction of ortho-alkynylphenyl acetals 1 in the presence of COD (1,5-cyclooctadiene) produces 3-(α-alkoxyalkyl)benzofurans 2 in good to high yields. For example, the reaction of acetaldehyde ethyl 2-(1-octynyl)phenyl acetal (1a), acetaldehyde ethyl 2-(cyclohexylethynyl)phenyl acetal (1c), and acetaldehyde ethyl 2-(phenylethynyl)phenyl acetal (1f) in the presence of 2 mol % of platinum(II) chloride and 8 mol % of 1,5-cycloocatadiene in toluene at 30 °C gave the corresponding 2,3-disubstituted benzofurans 2a, 2c, and 2f in 91, 94, and 88% yields, respectively. Moreover, the reaction of N-methoxymethyl-2-alkynylanilines 3 was catalyzed by PdBr₂, affording the corresponding 2,3-disubstituted indoles 4 in moderate yields. For example, the reaction of N-methoxymethyl-2-(1-pentynyl)-N-tosylaniline (3a) and N-methoxymethyl-2-(phenylethynyl)-N-tosylaniline (3b) in the presence of 10 mol % of PdBr₂ in toluene at 80 °C gave 3-methoxymethyl-2-propyl-1-tosylindole (4a) and 3-methoxymethyl-2-phenyl-1-tosylindole (4b) in 33 and 33% yields, respectively.     

ZrCl4 catalyzed highly selective and efficient Michael addition of heterocyclic enamines with α,β-unsaturated olefins

Highly selective and efficient Michael additions of heterocyclic enamines, viz. indoles, pyrroles, and pyrazoles with α,β-unsaturated olefins using 2 mol % of ZrCl₄ has been achieved.     

One-pot synthesis of 1,4-diarylsubstituted 1,3-diynes from the sequential coupling reactions of aryl iodides and propiolic acid

1,4-Disubstituted 1,3-dialkynes were obtained from the one-pot palladium/copper-catalyzed coupling reactions of aryl iodide and propiolic acid. The optimized catalytic system consisted of 5.0 mol % Pd(PPh₃)₂Cl₂, 10 mol % dppb, 10 mol % CuI, 2.4 equiv of DBU, and 1.2 equiv of K₂CO₃. The coupling reaction was carried out at 30 °C for 6 h and subsequently at 80 °C for 3 h.     

Carboxylation of indoles and pyrroles with CO2 in the presence of dialkylaluminum halides

The Lewis acid-mediated carboxylation of arenes with CO₂ has been successfully applied to 1-substituted indoles and pyrroles by using dialkylaluminum chlorides instead of aluminum trihalides. Thus, the carboxylation of 1-methylindoles, 1-benzyl-, and 1-phenylpyrroles proceeds regioselectively with the aid of an equimolar amount of Me₂AlCl under CO₂ pressure (3.0 MPa) at room temperature to afford the corresponding indole-3-carboxylic acids and pyrrole-2-carboxylic acids in 61-85% yields, while the same treatment of 1,2,5-trimethylpyrrole affords the 3-carboxylic acid in 52% yield.     

Synthesis of dihydropyrano[3,2-e]indoles as rotationally restricted phenolic analogs of 5-hydroxyindole—thermal Claisen approach versus gold catalysis

The Claisen rearrangement/cyclization of 5-propargyloxyindoles (2) to afford dihydropyrano[3,2-e]indoles (3) as direct precursors to tetrahydropyrano[3,2-e]indoles (1, a rotationally restricted phenolic analog of 5-hydroxyindole) was examined using either refluxing bromobenzene (156 °C) or Au⁺¹ catalysis in refluxing dioxane (101 °C). This transformation was best effected using Au⁺¹ catalysis (i.e., tris[triphenylphosphinegold(I)] oxonium tetrafluoroborate) because this method required a lower reaction temperature and gave better yields when compared to the simple thermal reaction conditions (156 °C).     

Synthesis of Indoles through Domino Reactions of 2‐Fluorotoluenes and Nitriles

Indoles are essential heterocycles in medicinal chemistry, and therefore, novel and efficient approaches to their synthesis are in high demand. Among indoles, 2‐aryl indoles have been described as privileged scaffolds. Advanced herein is a straightforward, practical, and transition‐metal‐free assembly of 2‐aryl indoles. Simply combining readily available 2‐fluorotoluenes, nitriles, LiN(SiMe₃)₂, and CsF enables the generation of a diverse array of indoles (38 examples, 48–92 % yield). A range of substituents can be introduced into each position of the indole backbone (C4 to C7, and aryl groups at C2), providing handles for further elaboration.     

Determination of 36 elements in plant reference materials with different Si contents by inductively coupled plasma mass spectrometry: comparison of microwave digestions assisted by three types of digestion mixtures

Closed-vessel microwave digestion of nine standard reference plant materials (NIST, BCR, IAEA) and a laboratory standard of plant material with different Si contents assisted by HNO₃ + H₂O₂ (procedure A), HNO₃ + H₂O₂ + HF + H₃BO₃ (procedure B) and HNO₃ + H₂O₂ + HBF₄ (procedure C) were used to determine the recovery of 36 elements by ICP-MS: Ag, Al, As, Ba, Be, Bi, Cd, Ce, Co, Cr, Cs, Cu, Fe, Ga, Ge, In, La, Li, Mn, Mo, Nd, Ni, Pb, Pr, Rb, Sb, Se, Sn, Sr, Th, Tl, U, V, W, Y, Zn. Additions of HF + H₃BO₃ and HBF₄ in procedures B and C exceeded by 10% (B1, C1) and 100% (B2, C2) the equivalent concentrations of Si in the samples determined by ICP-OES. Most recoveries of certified elements (e.g., Al^*, Cu, Mo^*, Rb^*, Sb^*, Th) decreased significantly (^*p ≤ 0.05) with increasing Si content in plant reference materials digested by procedure A, while the recoveries from procedures B and C decreased insignificantly only for Mo and Sb. Digestions B and C gave significantly higher recoveries of Al, Sb, W and REEs, which were tighter to the reference values of these elements. A similar effect was found for Cu, Fe, Li, Ni, Sn, Th, Tl, V, Zn, Ba, Rb and Sr recoveries in samples with Si contents exceeding 2000 μg g⁻¹. If the Si content in plant samples is less than 10 mg g⁻¹, digestion of 0.5 g of plant samples through 0.05 mL of HF and 0.5 mL of 4% H₃BO₃ or 0.1 mL of HBF₄ is recommended to get satisfactory results for most of the elements. For materials with Si content exceeding 10 mg g⁻¹ the weight of the sample for digestion should be reduced to 0.25 g. However, the operation of potential interferences should be taken into account and eliminated through correction equations and adequate dilution of the samples.     

Cross coupling of 3-bromopyridine and sulfonamides (RNHSO2R·R = H, Me, alkyl; R = alkyl and aryl) catalyzed by CuI/1,3-di(pyridin-2-yl)propane-1,3-dione

N-(3-Pyridinyl)-substituted secondary and tertiary sulfonamides have been synthesized in good to excellent yields by the reaction of 3-bromopyridine with primary and secondary alkyl and aryl sulfonamides (MeSO₂NH₂, MeSO₂NHMe, TolSO₂NH₂, TolSO₂NHMe, 1,3-propanesultam, and 1,4-butanesultam), catalyzed by CuI (20 mol %) and 1,3-di(pyridin-2-yl)propane-1,3-dione (20 mol %) with K₂CO₃ (200 mol %) in DMF (0.17 M for ArBr) at 110-120 °C over 36-40 h. 2-Bromopyridine, 4-bromopyridine, and a wide variety of substituted phenyl bromides can also be successfully coupled with sulfonamides under these reaction conditions.