Short and convenient synthesis of two natural phthalides by a copper(I) catalysed Sonogashira/oxacyclisation copper(I) process

Total synthesis of (±)-herbaric acid and (±)-(4-methoxybenzyl)-5,7-dimethoxyphthalide, two natural phthalide products, was achieved in 8 steps and 5 steps, respectively, starting from commercially available 3,5-dimethoxyaniline. The key step of the sequence included a copper-catalysed tandem cross-coupling and oxacylisation reaction of terminal alkynes and 2-iodobenzoïc acid derivatives via 5-exo-dig cyclisation with high stereo-, regio- and chemoselectivities. This straightforward method allows the preparation of diverse phthalides, which belong to a group of pharmacologically important compounds.     

Direct synthesis of highly fused perimidines by copper(I)-catalyzed hydroamination of 2-ethynylbenzaldehydes

A novel synthesis of highly fused perimidine derivatives was achieved in two steps from 2-alkynylbenzaldehydes. Copper-catalyzed annulation of 2-[(2-bromophenyl)ethynyl]benzaldehydes with 1,8-diaminonaphthalene produced dihydroisoquinolino[2,1-a]perimidines bearing a 2-bromophenyl group. Subsequent palladium-catalyzed C-H arylation provided dibenzo[1,2:7,8]quinolizino[3,4,5,6-kla]perimidine derivatives in moderate to good yields.     

Inter and intramolecular copper(I)-catalyzed 1,3-dipolar cycloaddition of azido-alkynes: synthesis of furanotriazole macrocycles

The Cu(I)-catalyzed cycloaddition of azido-alkynes (click reaction) of furanose sugar substrates provides a facile approach for the construction of macrocyclic molecules via an inter and/or intramolecular cycloaddition based on the functionality between alkyne and azide.     

A cyclative cleavage approach to solid-phase synthesis of annulated pyrimidinones using Baylis-Hillman derivatives

An efficient and robust solid-phase synthesis of 6-substituted-2,5,6,8-tetrahydro-3H-imidazo[1,2-a]pyrimidin-7-ones, 3-substituted-1,3,4,6,7,8-hexahydro-pyrimido[1,2-a]pyrimidin-2-ones and 3-substituted-3,4,6,7,8,9-hexahydro-1H-pyrimido[1,2-a][1,3] diazepin-2-ones from the acetates of Baylis-Hillman adducts employing Michael addition of diamines followed by intramolecular cyclization with cyanogen bromide and, finally, base promoted cyclative cleavage has been developed. The procedure is validated through an automated parallel synthesis of a small library of fourteen compounds of the 3H-imidazo[1,2-a]pyrimidin-7-one series.     

Chemistry of thiocarboxylates: synthesis and structures of neutral copper(I) thiocarboxylates with triphenylphosphine

The reactions of Na+ R[O]CS- (R = Me, Ph) with mixtures of CuCl and PPh3 in stoichiometric ratios yielded the compounds [Cu4(SC[O]Me)4(PPh3)4] (1), [Cu4(SC[O]Ph)4(PPh3)3] (2), [Cu2(SC[O]Me)2(PPh3)4] (3), [Cu(SC[O]Ph)(PPh3)2] (4), and [Cu2(SC[O]Ph)2(PPh3)3] (5) quantitatively. Compound 2 was also obtained from mixtures of CuCl, PPh3, and NaSC[O]Ph in the ratio 1:1:1. The analogous thioacetate compound similar to 2 and the thiobenzoate analogue of 1 could not be obtained. Attempts to prepare the unsymmetrical dimer of a thioacetate compound similar to 5 gave a mixture of 1 and 3. The structures of 1-4 have been determined by single-crystal X-ray diffraction methods. Crystal data for 1: triclinic space group Pl, a = 11.5844(3) A, b = 13.2459(3) A, c = 14.3433(3) A, alpha = 64.019(1) degrees, beta = 79.297(1) degrees, gamma = 69.426(1) degrees, V = 1850.98(7) A3, Z = 1, Dcalcd = 1.439 g.cm-3. Crystal data for 2.0.5CH2Cl2.H2O: triclinic space group P1, a = 12.4413(1) A, b = 15.5443(1) A, c = 20.4637(3) A, alpha = 94.974(1) degrees, beta = 95.976(1) degrees, gamma = 100.450(1) degrees, V = 3848.09(7) A3, Z = 2, Dcalcd = 1.416 g.cm-3. Single-crystal data for 3: monoclinic space group P2(1)/n, a = 15.2746(2) A, b = 23.2947(2) A, c = 19.0518(3) A, beta = 96.713(1) degrees, V = 6732.5(2) A3, Z = 4, Dcalcd = 1.309 g.cm-3. Crystal data for 4: triclinic space group P1, a = 10.2524(3) A, b = 12.9826(4) A, c = 14.5340(4) A, alpha = 87.723(1) degrees, beta = 75.322(1) degrees, gamma = 75.978(1) degrees, V = 1815.14(9) A3, Z = 2, Dcalcd = 1.327 g.cm-3. Compound 1, [mu 3-SC[O]Me-S)2(mu-SC[O]Me-S)2(CuPPh3)4], is a tetramer with a distorted stepladder structure in which two copper atoms are trigonally coordinated and the other two are tetrahedrally coordinated. Two bonding modes, namely, mu 3-S and mu 2-S, were observed for the Me[O]CS- anion. The structure of 2 may be described as a highly distorted cubanoid structure and formulated as [(mu 3-SC[O]Ph-S3)(mu 3-SC[O]Ph-S2,O)3(Cu)(CuPPh3)3]. In 2, three copper atoms have tetrahedral coordination geometry and one copper atom is trigonally coordinated. Unprecedented bonding modes, namely, mu 3-S, have been observed for the R[O]CS- anions, in 1 and 2 and mu 3-S2,O in 2. Compound 3, [(mu-SC[O]MeS)(mu-SC[O]Me-S,O)[Cu(PPh3)2]2] is a dimer with mu 2-S and mu 2-S,O bonding modes of Me[O]CS- ligands. Monomeric structure was found in 4 in which the copper atom has trigonal planar geometry with a very weak intramolecular interaction with O. Variable temperature 31P NMR studies in solution show the presence of various species in equilibria.     

Homogeneous oxidation reactions catalysed by in situ-generated triazolylidene copper(I) complexes

Transition Metal Chemistry - Four new Cu complexes bearing triazolylidene ligands 1-(R)-3-methyl-4-phenyl-1H-1,2,3-triazol-3-ium-5-yl: R?=?phenyl (2a), mesitylenyl (2b), propyl (2c),...     

Asymmetric synthesis of chiral spiro bis(isoxazoline) and spiro (isoxazole–isoxazoline) ligands

Asymmetric synthesis of novel chiral ligands, bis(isoxazoline) on a spiro[4.4]nonane scaffold and isoxazole–isoxazoline on a spiro[4.5]decane scaffold, has been achieved by utilizing an enantiomerically pure alcohol as the starting material.     

Pd(0)-catalyzed intramolecular Heck reaction: A general route for fused oxepine derivatives

A simple and facile approach for the synthesis of various structurally different tricyclic bent oxepine frameworks from a readily accessible precursor has been introduced. The synthesis of substituted oxepine derivative involved Pd(0)-catalyzed Heck reaction. This methodology enriches the literature for the large ring formation.     

Syntheses and crystal structures of "unligated" copper(I) and copper(II) trifluoroacetates

Two extremely unstable copper trifluoroacetates with no exogenous ligands, namely, Cu(O2CCF3) (1) and Cu(O2CCF3)2 (2), are prepared for the first time and obtained in crystalline form by deposition from the vapor phase. Their structures are determined by X-ray crystallography. The crystallographic parameters are as follows: for 1, monoclinic space group P2(1)/c, with a = 9.7937(6) A, b = 15.322(1) A, c = 12.002(1) A, beta = 106.493(9) degrees, and Z = 4; for 2, orthorhombic space group Pcca, with a = 16.911(1) A, b = 10.5063(9) A, c = 9.0357(6) A, and Z = 4. Both structures are unique among other CuI and CuII carboxylates, as well as among metal carboxylates in general. Compound 1 consists of a planar rhombus of four copper atoms with sides of 2.719(1)-2.833(1) A and trifluoroacetate ligands bridging the pairs of adjacent metal atoms alternately above and below the plane. The tetrameric units are further aggregated in a polymeric zigzag ribbon [Cu4(O2CCF3)4]infinity by virtue of intermolecular Cu...O contacts. The structure of 2 is built on cis bis-bridged dimers in which every metal atom is also connected with two copper atoms of the neighboring units. The stacking planes in this extended chain are almost perpendicular to one another. The Cu...Cu distance inside the dimer is 3.086(2) A, indicating a nonbonding interaction.     

A convenient synthesis of copper(I) carboxylates

A simple procedure is described for the synthesis of aliphatic and aromatic copper(I) carboxylates by the reduction of copper(II) carboxylates with commercially available tin(II) 2-ethylhexanoate. In this way copper(I) acetate, benzoate and stearate have been prepared in good yield and purity from the corresponding copper(II) carboxylates.     

Efficient synthesis of a labile copper(I)-rotaxane complex using click chemistry

Copper(I)-induced threading of 5,5′-diazidomethyl-2,2′-bipyridine through a coordinating ring followed by reaction of a propargyl ether attached to a stopper group leads to the desired rotaxane in 62% yield. The reaction is carried out under the ‘click chemistry’ conditions with 0.75 equiv of additional copper(I).     

The synthesis of fused benzotriazoles based on hexaaminobenzene derivatives

New methods for synthesis of hexaaminobenzene are proposed and, based on this compound, previously unknown preparative procedures for obtaining fused benzotriazoles are developed.Translated fromIzvestiya Akademii Nauk, Seriya Khimicheskaya, No. 1, pp. 152–154, January, 1993.     

Diastereo- and enantioselective intramolecular C(sp3)-H arylation for the synthesis of fused cyclopentanes

All C-H bonds are not equal: The intramolecular arylation of unactivated C(sp(3))-H bonds in the presence of a chiral Pd/binepine catalyst allows the synthesis of fused cyclopentanes efficiently and in an diastereo- and enantioselective manner (see scheme).     

Trialkylphosphine-stabilized copper(I) phenylchalcogenolate complexes--crystal structures and copper-chalcogenolate bonding

A series of trialkylphosphine-stabilized copper(I) phenylchalcogenolate complexes [(R(3)P)(m)(CuEPh)(n)] (R = Me, Et, (i)Pr, (t)Bu; E = S, Se, Te) has been prepared and structurally characterized by X-ray diffraction. Structures were found to be mono-, di-, tri-, tetra-, hexa-, hepta-, or decanuclear, depending mainly on size and amount of phosphine ligand. Several structural details were observed, including unusually long Cu-E bonds or secondary Cu-E connections, μ(4)-bridging, and planar bridging chalcogenolate ligands. Relatively rigid Cu-E-C angles were found to be of significant influence on the flexible molecular structures, especially for bridging chalcogenolate ligands, since in these cases a correlation results between the Cu-E-Cu angles and the inclination of the E-C bonds to their Cu-E-Cu planes. We further address some of these phenomena by means of density functional computations.     

Stereoselective synthesis of novel annulated thiopyrano indole derivatives from simple oxindole via intramolecular 1,3-dipolar cycloaddition reactions of nitrone and nitrile oxide

Synthesis of some novel isoxazolidine/dihydroisoxazole annulated thiopyrano[2,3-b]indole derivatives from simple oxindole via 1,3-dipolar cycloaddition reaction involving nitrone and nitrile oxide as 1,3-dipole is reported.     

One-pot synthesis of asymmetric annulated bis(pyrrole)s

Condensation of activated functionalized pyrroles with acetone results in asymmetric bis(pyrrole)s, formed via ring annulation. The methodology is somewhat general and can be applied to a variety of ketones, as well as to a range of pyrrolic substrates that do not bear electron-withdrawing groups directly adjacent to the pyrrole ring.     

Ketone synthesis by intramolecular acylation of organorhodium(I) with ester

New cyclization reactions forming cyclic ketones were developed wherein an intermediate organorhodium(I) species underwent intramolecular acylation with an ester group. A 2-norbornanone skeleton is constructed in a single operation through successive multiple carbon-carbon bond formation. The reactions ended up with generation of an alkoxyrhodium(I) species to promote the next catalytic cycle.     

The structures of Cu(I) and Ag(I) coordination polymers using the tricyanofluoroborate anion

The anion BF(CN)3-forms isomorphous network polymers with Cu(I) and Ag(I) that exhibit one-dimensional channels along the b axis and demonstrate stability to air and light respectively.