Determination of the fungicide ferbam in wheat grains after adsorption onto microcrystalline naphthalene

A procedure was developed for the determination of iron(III) dimethyldithiocarbamate by converting it into iron(II)-bathophenanthroline-tetraphenylborate complex, which was then adsorbed onto microcrystalline naphthalene. The absorbance was measured at 534 nm against a reagent blank. Beer's Law was obeyed over the concentration range of 0.4-20 microg mL in final solution. Ten replicate determinations on 70 microg ferbam solutions gave a mean absorbance of 0.36, with a relative standard deviation of 0.91%. The method is sensitive and highly selective. It was applied for the determination of ferbam in a commercial sample and in mixtures with various dithiocarbamates (ziram, zineb, maneb) and wheat grains.     

Fourth-derivative spectrophotometric determination of fungicide ferbam (iron(III) dimethyldithiocarbamate) in a commercial sample and wheat grains using 2,2′-bipyridyl

A procedure has been developed for the direct fourth-derivative spectrophotometric determination of iron(III) dimethyldithiocarbamate by converting it into an iron(II) 2,2'-bipyridyl complex, which is then dissolved in Triton X-100. Beer's law is obeyed over the concentration range 0.5-20 microg mL(-1 )in the final solution. Various parameters such as the effect of pH and interference of large number of ions on the determination of ferbam have been studied in detail. The method is sensitive, highly selective and can be used for the determination of ferbam in a commercial sample and in mixtures with various dithiocarbamates (ziram, zineb, maneb, etc.) and from wheat grains.     

Spectrophotometric determination of iron(III) dimethyldithiocarbamate (ferbam)

A spectrophotometric method was developed for the determination of ferbam (iron(III) dimethyldithiocarbamate) by converting it into an iron-phenanthroline complex, which was then absorbed on microcystalline naphthalene in the presence of tetraphenylborate, and the absorbance was measured at 515 nm against a reagent blank. The molar absorptivity of the complex was 1.2 x 10(4)l mol(-1)cm(-1). Ten replicate analyses of a sample solution containing 150 mug of ferbam gave a relative standard deviation of 0.84%. Beer's law was obeyed over the concentration range 22.4-372.9 mug of ferbam. The effects of various factors such as reagent concentration and naphthalene, shaking time and diverse ions were studied in detail. The method is sensitive and selective and can be applied to the direct determination of ferbam in commercial samples and in mixtures containing various other dithiocarbamates (e.g. ziram, zineb and maneb) in foodstuffs.     

Selective trace determination of dithiocarbamate fungicides in fruits and vegetables by reversed-phase ion-pair liquid chromatography with ultraviolet and electrochemical detection

The predominant methods for determination of dithiocarbamate fungicides (DTC) have been based on quantitation of carbon disulfide released by hot acid digestion. Because the subgroups of the DTC family differ in their chemical properties and toxicological behavior, selective determination is required. To meet the demand for a fast, simple, and sensitive procedure, a new reversed-phase ion-pair chromatographic method was developed, consisting of surface extraction followed by direct injection into a liquid chromatographic system equipped with ultraviolet and electrochemical detectors, connected in series. The procedure is applicable to residues of N-methyldithiocarbamates (metam-sodium), N,N-dimethyldithiocarbamates (e.g., ziram and ferbam), ethylenebisdithiocarbamates (e.g., nabam, maneb, zineb, and mancozeb), and propylenebisdithiocarbamates (e.g., propineb) in fruits and vegetables. Limits of quantitation, calculated according to the procedure of the Deutsche Forschungsgemeinschaft, are 9, 12, 8, and 12 microg CS2/L for N-methyl-DTC, N,N-dimethyl-DTC, ethylenebis-DTC, and propylenebis-DTC, respectively, when electrochemical detection is used.     

Capillary electrophoretic determination of dithiocarbamates and ethyl xanthate

A simple and sensitive capillary electrophoretic method was developed for the separation and determination of sodium methyldithiocarbamate (metham), manganese ethylenebisdithiocarbamate (maneb) and ethyl xanthate in boric acid buffer by direct UV absorbance detection at lambda = 254 nm. The separation is dependent on pH and nature of the buffer. The detection limits (S/N = 3) are 1.7 x 10(-6) mol/L for ethyl xanthate, 1.3 x 10(-6) mol/L for metham and 2.1 x 10(-6) mol/L for maneb. The method has been successfully applied to the analysis of wheat samples spiked with maneb and in a commercial sample.     

Capillary electrophoretic determination of dithiocarbamates and ethyl xanthate

A simple and sensitive capillary electrophoretic method was developed for the separation and determination of sodium methyldithiocarbamate (metham), manganese ethylenebisdithiocarbamate (maneb) and ethyl xanthate in boric acid buffer by direct UV absorbance detection at λ = 254 nm. The separation is dependent on pH and nature of the buffer. The detection limits (S/N = 3) are 1.7 × 10^–6 mol/L for ethyl xanthate, 1.3 × 10^–6 mol/L for metham and 2.1 × 10^–6 mol/L for maneb. The method has been successfully applied to the analysis of wheat samples spiked with maneb and in a commercial sample.     

Spectrophotometric determination of zinc bis-ethylenedithiocarbamate (zineb)

A spectrophotometric method has been developed for the determination of zineb by converting it into a molybdenum ethylenedithiocarbamate complex, which is then extracted into isobutyl methyl ketone and measured at 670 nm against a reagent blank. Beer's law is obeyed over the zineb concentration range 2-40 mug/ml in the extract. The method is sensitive and can be used for determination of zineb in the presence of ziram, thiram or ferbam.     

Spectrophotometric determination of ziram, ferbam and zineb with diphenylcarbazone

A procedure has been developed for the determination of ziram (zinc dimethyldithiocarbamate), ferbam (ferric dimethyldithiocarbamate) and zineb (zinc ethylenebisdithiocarbamate) after their decomposition and extraction of the diphenylcarbazone complexes of the zinc or iron into isobutyl methyl ketone. These complexes absorb strongly at 520 nm. The method is rapid, sensitive and selective and can be used for the determination of these dithiocarbamates in commercial and synthetic mixtures.     

Determination of benzoate,sorbate, citrate and orthophosphate ions in beverage samples using two-dimensional isotachophoretic method

A two-dimensional capillary isotachophoretic method (cITP-cITP) using electrolyte system consisting of leading electrolytes (LE1): [10 mM HCl + β-alanine (pH 3.9) + 0.1% hydroxyethylcellulose (HEC)] and (LE2): [10 mM HCl + aminocaproic acid (pH 5.00) + 0.1% HEC], and 5 mM caproic acid as terminating electrolyte (TE) was studied. Two methods of detection, conductometric and UV-Vis, were applied to the determination of selected food preservatives and additives. Practical applicability was demonstrated by simultaneous determination of benzoates, sorbates, citrates and orthophosphates in 12 samples of beverages. The proposed method revealed linearity with R ² between 0.9992 and 0.9999 for the concentration ranges: 10–100 mg/L (orthophosphate and citrate ions), 20–100 mg/L (sorbates) and 40–120 mg/L for benzoates. The detection limits for all studied ions were from 0.85 to 3.1 mg/L whereas the quantification ones were from 2.8 to 10 mg/L. The variation coefficients for five-fold analysis of all ions ranged between 0.4 and 9.1%. Obtained recoveries (from 97 to 104%) confirmed satisfactory accuracy of the proposed cITP-cITP method for the determination of tested food additives.     

Spectrophotometric determination of iron(III)-dimethyldithiocarbamate (ferbam) using 9-(4-carboxyphenyl)-2,3,7-trihydroxyl-6-fluorone

A spectrophotometric method was developed for the determination of iron(III)-dimethyldithiocarbamate (ferbam) by concerting it into an iron(III)-9-(4-carboxyphenyl)-2,3,7-trihydroxyl-6-fluorone complex. In NH₃-HAc buffer solution (pH 6.5), the reagent reacts with ferbam to form a blue complex with a maximum absorption peak at 640 nm. The reaction can be completed rapidly at room temperature and the absorbance is stable for at least 24 h. The apparent molar absorption coefficient, Sandell’s sensitivity of the complex, the detection limit and the relative standard deviation were found to be 1.06×10⁵ l mol⁻¹ cm⁻¹, 3.9 ng cm⁻², 2.2 ng ml⁻¹ and 1.06%, respectively. From 0 to 75 μg of ferbam in 25 ml solution the absorbance obeyed Beer’s law. The effect of foreign ions and other dithiocarbamates were also studied in detail. The results indicated that all coexisting ions examined can be tolerated in considerable amounts, especially other dithiocarbamates such as ziram and zineb, which always interfere with the determination of ferbam in the literature. The proposed method is very sensitive, selective and simple, it has been applied to determine ferbam in commercial samples.     

Selective determination of cadmium(II) from divalent metal ions in environmental samples by capillary electrophoresis using in-capillary complexation with a lacunary Keggin-type [PW11O39]7- complex.

A novel capillary electrophoretic (CE) method, based on in-capillary complexation with [PW(11)O(39)](7-), was developed for the determination of cadmium(II) in natural water samples. When a sample solution is injected into a capillary containing 0.20 mM [PW(11)O(39)](7-) and 0.10 M malonate buffer (pH 3.0), the ternary Keggin-type complex, [P(Cd(II)W(11))O(39)](5-), which possesses high molar absorbtivities in the UV region, is formed in the capillary, and its migration toward the anode gives a well-defined migration peak in the electropherogram. An advantage of this method is that many divalent metal ions do not interfere. The proposed method was successfully applied to the determination of Cd(II) in environmental samples. The detection limits were 1 x 10(-7) and 5 x 10(-7) M for river-water and seawater samples, respectively (signal-to-noise ratio = 3).     

Determination of copper and iron using [S,S']-ethylenediaminedisuccinic acid as a chelating agent in wood pulp by capillary electrophoresis.

A capillary electrophoresis (CE) method is described for the simultaneous determination of copper and iron after complexation with a readily biodegradable chelating agent, [S,S']-ethylenediaminedisuccinic acid (EDDS), in wood pulp. CE separation was performed in a fused-silica capillary (50 microm i.d.; total length, 65 cm) with an electrolyte containing 25 mM borate buffer and 0.5 mM CTAB at pH 7.0 and an applied voltage of -25 kV. The samples were introduced by applying a 50 mbar pressure for 2 s, and detection of the complexes was monitored at 245 nm. The methodology performance of the methods was evaluated in terms of the linearity, limit of detection (LOD), limit of quantitation (LOQ) and reproducibility. The applicability of the method was demonstrated for the analysis of copper and iron in wood pulp.     

Specific determination of ferbam residues in fog-water

A specific method for the determination of a fungicide, i.e. iron(III) dimethyldithiocarbamate (ferbam) in fog-water samples is described. The method is based on the releasing of equivalent amount of iron from the fungicide and subsequently determination by spectrophotometrically or by flame-atomic absorption spectrometrically (flame-AAS). The fungicide was extracted with chloroform/toluene from the samples and digested with nitric acid. For spectrophotometric determination, the solution was then treated with ammonium thiocyanate solution in presence of the surfactants and absorbance was measured at 475 nm. Whereas, the digested solution was directly applied for flame-AAS determination of ferbam. The molar absorptivity in terms of ferbam was determined to be (3.49)×10⁴ l mol⁻¹ cm⁻¹. The detection limits for spectrophotometric and flame-AAS methods were calculated to be 62 and 111 ppb ferbam (R.S.D. <1 and <3%), respectively. Whereas, the optimum concentration ranges for the analysis of ferbam are 4–120 and 1.5–55 μg in final volume, respectively. The methods are freed from interference of almost all ions [including Fe(II) and Fe(III)], which can commonly associate with ferbam in fog-water. The methods have been successfully applied to fog samples collected from agriculture sites of Raipur (central India).     

Determination of capsaicin and dihydrocapsaicin by micellar electrokinetic capillary chromatography and its application to various species of Capsicum, Solanaceae.

An easy, rapid and sensitive method of analysis for capsaicin and dihydrocapsaicin and its application for determination of these two amides in fruit extracts of different varieties of Capsicum frutescens by micellar electrokinetic capillary chromatography has been developed. Optimum separation was achieved with a fused-silica capillary column (600 mm x 0.075 mm I.D) and a running buffer at pH 9.0 prepared from 15 mM sodium tetraborate and 15 mM sodium dihydrogenphosphate, and 67.5 mM sodium dodecyl sulphate. Addition of 15% (v/v) methanol in the running buffer was found to be essential for the separation. The applied voltage was +22.5 kV. The compounds were detected by UV at 214 nm. Both capsaicin and dihydrocapsaicin were detected within 11 min, with an excellent resolution.     

Determination of benzhexol hydrochloride by capillary zone electrophoresis with an end-column electrochemiluminescence detection

A capillary zone electrophoresis with end-column electrochemiluminescence (ECL) detector was described for the determination of benzhexol hydrochloride. The detection was based on the tris(2,2′-bypyridine)ruthenium(II) [Ru(bpy)₃²⁺] ECL reaction with the analyte. Electrophoresis was performed using a 25 μm i.d. uncoated capillary. 10 mM sodium phosphate buffer (pH=8.0) was used as the running buffer. The solution in the detection cell was 80 mM sodium phosphate (pH=8.0) and 5 mM Ru(bpy)₃²⁺. A linear calibration curve of three-orders of magnitude was obtained (with a correlation coefficient of >0.999) from 1.0×10⁻⁸ to 1.0×10⁻⁵ M and the limit of detection was 6.7×10⁻⁹ M (S/N=3). This just provides an easy and sensitive method to determine the active ingredient in pharmaceutical formulations.     

Determination of hydrazine, monomethylhydrazine, 1,1-dimethylhydrazine, and 1,2-dimethylhydrazine by nonaqueous capillary electrophoresis with amperometric detection

The present study is concerned with the application of nonaqueous capillary electrophoresis (NACE) with electrochemical detection (ED) to the separation and quantitative determination of hydrazine (Hy) and its methyl derivatives. The best performance of NACE-ED was found when using 4 mM sodium acetate/10 mM acetic acid/methanol: acetonitrile = 1:2 as the running buffer, with a bare platinum working electrode set at +1.0 V in an end-column amperometric detection cell. The choice and ratio of suitable solvents for the separation and injection media played an essential role for the performance characteristics of the method. The limits of detection for Hy, methylhydrazine, symmetrical dimethylhydrazine, and unsymmetrical dimethylhydrazine were 5, 2, 12, and 1 ng/mL, respectively. This is between one and two orders of magnitude lower than that achieved by previously reported CE-ED methods in aqueous buffer systems in conjunction with various types of chemically modified electrodes. The practical utility of the new NACE-ED methodology is demonstrated in terms of the determination of traces of Hys in spiked environmental samples containing a wide range of explosives and related compounds.     

Simple and rapid method for the determination of ethylenebisdithiocarbamate fungicides in fruits and vegetables using liquid chromatography with tandem mass spectrometry

A simple and rapid method for determining ethylenebisdithiocarbamates (EBDCs; mancozeb, maneb, and zineb) in fruits and vegetables is described. EBDCs are transformed into dimethylethylenebisdithiocarbamate (EBDC-dimethyl) by methylation after their decomposition with ethylenediaminetetraacetic acid (EDTA). These processes were performed simultaneously in this method. Dimethyl sulfate was used as the methylation reagent, and acetonitrile extracts obtained from partitioning with anhydrous magnesium sulfate and sodium chloride were subjected to dispersive solid-phase extraction with the primary secondary amine sorbent. Liquid chromatography with tandem mass spectrometry in the positive heated-electrospray ionization mode was used for the determination of EBDC-dimethyl produced from EBDCs. The method was validated at levels of 10, 50, and 100 ng g⁻¹ maneb as a representative EBDC. The recoveries of the present method were between 71 and 101%. The limits of detection and quantification were 0.24 and 0.8 ng g⁻¹ maneb, respectively.     

Chiral capillary electrophoretic determination of the enantiomeric purity of homocamptothecin derivatives, promising antitumor topoisomerase I inhibitors, using highly sulfated CDs and fluorescence detection

EKC methods for the enantiomeric resolution of homocamptothecin derivatives, potent anticancer agents targeting DNA topoisomerase I selected for clinical trials, were developed using highly sulfated beta-CD as chiral selectors at acidic pH. Optimal electrophoretic conditions, with migration times under 15 min, were as follows: for the neutral homocamptothecin analog 1, a BGE of 75 mM phosphate buffer pH 2.5 (H(3)PO(4) + triethanolamine)/ACN - 95/5 v/v, with 7.5% w/v highly S-beta-CD, an applied field of 0.2 kV/cm and a fused capillary temperature control of 30 +/- 0.1 degrees C (typical current approximately 175 microA); for the cationic homocamptothecin 2, a BGE of 25 mM phosphate buffer pH 2.5 (H(3)PO(4) + TEA)/ACN - 90/10 v/v, with 2.5% w/v highly S-beta-CD, an applied field of 0.15 kV/cm and a fused capillary temperature control of 25 +/- 0.1 degrees C (typical current approximately 45 muA), and both are validated. The best results in terms of LOQ were obtained by EC with fluorescence detection: 10 ng/mL and 20 ng/mL for 1 and 2, respectively (LOQ divided by 150 for 1 and 5 for 2 with respect to UV), thus making this method particularly convenient for enantiomeric purity determination of galenic forms. UV detection appears to be an alternative to fluorescence for the analysis of the main component either for the control of galenic forms or for therapeutic adaptation. Moreover, this method exhibits better performances than HPLC.     

Determination of antitubercular drugs by micellar electrokinetic capillary chromatography (MEKC)

A method for the determination of isoniazid (ISO), pyrazinamide (PYR) and rifampicin (RIF) in pharmaceutical products, by micellar electrokinetic capillary chromatography (MEKC) with ultraviolet detection is described. The influence of pH, concentration of surfactants, buffer and organic solvents, over the separation were studied as experimental variables. The optimal separation was carried out at 30 degrees C and 20 kV, using a 40 mM borate buffer and 100 mM sodium dodecylsulphate (SDS) adjusted to pH 8.5. Under these conditions, the analysis is accomplished in about 8 min. The method was applied to the determination of these compounds in different pharmaceuticals with good results when compared with a reference liquid chromatographic (LC) method.     

An ultrasensitive method for the determination of thiouracil and phenylthiouracil using capillary zone electrophoresis and laser-induced fluorescence detection

This paper reports the development of a method based on capillary electrophoresis with laser-induced fluorescence detection for the simultaneous determination of thiouracil (TU) and phenylthiouracil (PhTU) with high sensitivity (nanomolar range, i.e., attomoles detected). After derivatization with 5-iodoacetamidofluorescein, the analytes were separated by capillary zone electrophoresis using 20 mM phosphate buffer (pH 10.0) and quantified by fluorescence detection. The linearity range, precision, recovery, and detection limits were determined, and the method was shown to be applicable for the determination of TU and PhTU in spiked feed samples and urine.