Microstructure and dynamic mechanical analysis of extruded layered silicate PVC nanocomposites

The nanostructure and dynamic mechanical properties of polyvinyl chloride (PVC) and the bentonite nanocomposites have been investigated. Nanocomposites with 5 wt% concentration of bentonite were prepared by melt extrusion followed by two‐roll‐milled processing. Atomic force microscopy (AFM) and wide‐angle X‐ray scattering (WAXS) were utilized to study the micro and nanostructure of the two‐roll‐milled sheets. The nanocomposites were compounded with two types of coupling agents: KZTPP® and Tamol 2001®. Optical microscopy showed that the materials remained optically transparent, i.e. they did not show evidence of nanoclay agglomeration. The WAXS patterns of PVC‐bentonite‐KZTPP nanocomposite were anisotropic, suggesting flow‐induced preferred orientation of the nanoplates. Moreover, the 001 reflection of the bentonite was shifted toward smaller angles, suggesting that the nanoplates were intercalated by the macromolecules. On the other hand, the WAXS patterns of PVC‐bentonite‐Tamol 2001 nanocomposite remained isotropic and did not show evidence of bentonite, suggesting exfoliation of the nanoplates. The nanocomposites showed an increase in glass transition temperature T_g, with the sequence T_g,PVC < T_g,KZTPP < T_{g,Tamol 2001}. Moreover, dynamic mechanical analysis (DMA) showed an increase in mechanical moduli and activation energy (and a decrease in the intensity of the mechanical damping Tan δ) following the same sequence. Interestingly, the improvement in mechanical moduli became more pronounced above the glass transition temperature. Copyright © 2008 John Wiley & Sons, Ltd.     

Effects of microscale calcium carbonate and nanoscale calcium carbonate on the fusion,thermal, and mechanical characterizations of rigid poly(vinyl chloride)/calcium carbonate composites

A Haake torque rheometer equipped with an internal mixer has been used to study the influence of microscale calcium carbonate (micro‐CaCO₃) and nanoscale calcium carbonate (nano‐CaCO₃) on the fusion, thermal, and mechanical characteristics of rigid poly(vinyl chloride) (PVC)/micro‐CaCO₃ and PVC/nano‐CaCO₃ composites, respectively. The fusion characteristics discussed in this article include the fusion time, fusion temperature, fusion torque, and fusion percolation threshold (FPT). The fusion time, fusion temperature, and FPT of rigid PVC/calcium carbonate (CaCO₃) composites increase with an increase in the addition of micro‐CaCO₃ or nano‐CaCO₃. In contrast, the fusion torque of rigid PVC/CaCO₃ composites decreases with an increase in the addition of micro‐CaCO₃ or nano‐CaCO₃. The results of thermal analysis show that the first thermal degradation onset temperature (T_onset) of rigid PVC/micro‐CaCO₃ is 7.5 °C lower than that of PVC. Meanwhile, the glass‐transition temperature (T_g) of rigid PVC/micro‐CaCO₃ is similar to that of PVC. However, T_onset and T_g of PVC/nano‐CaCO₃ composites can be increased by up to 30 and 4.4%, respectively, via blending with 10 phr nano‐CaCO₃. Mechanical testing results for PVC/micro‐CaCO₃ composites with the addition of 5–15 phr micro‐CaCO₃ and PVC/nano‐CaCO₃ composites with the addition of 5–20 phr nano‐CaCO₃ are better than those of PVC. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 451–460, 2006     

Epoxy-nanocomposites containing exfoliated zirconium phosphate: Preparation via cationic photopolymerisation and physicochemical characterisation

Gels of exfoliated α-zirconium phosphate in 3,4-epoxycyclohexylmethyl-3′,4′-epoxycyclohexane carboxylate (hereafter BCDE) were polymerised by a UV-induced process and the resulting nanocomposites were characterised by TEM, X-ray diffraction, thermogravimetric analysis and dynamic-mechanical thermal analysis. Real-time FT-IR spectroscopy was used to investigate the photopolymerisation kinetics. The polymerisation rate of the gels is faster than that of neat BCDE, especially when the filler is functionalised with aminoalcohols (HO(CH₂)_nNH₂, with n = 3, 4, 5). The composites exhibit lower T_g values in comparison with neat polymerised BCDE. Because of the barrier effect towards oxygen diffusion due to the high aspect ratio of the filler particles, all composites also exhibit enhanced thermal stability.     

PW based phase change nanocomposites containing <Emphasis Type="Italic">γ</Emphasis>-Al<Subscript>2</Subscript>O<Subscript>3</Subscript>

Phase change nanocomposites were prepared by dispersing γ-Al₂O₃ nanoparticles into melting paraffin wax (PW). Intensive sonication was used to make well dispersed and homogeneous composites. Differential scanning calorimetric (DSC) and transient short-hot-wire (SHW) method were employed to measure the thermal properties of the composites. The composites decreased the latent heat thermal energy storage capacity, L _s, and melting point, T _m, compared with those of the PW. Interestingly, the composites with low mass fraction of the nanoparticles, have higher latent heat capacity than the calculated latent heat capacity value. The thermal conductivity of the nanocomposites was enhanced and increased with the mass fraction of Al₂O₃ in both liquid state and solid state.     

Miscibility behavior of di(ethyl-2 hexyl) phthalate in binary and ternary chlorinated polymer blends

The miscibility behavior of ternary blends made by the addition of di(ethyl-2 hexyl) phthalate (DOP) to a mixture of chlorinated polymers was investigated by differential scanning calorimetry. Two chlorinated polymer mixtures were selected: polyvinyl chloride (PVC) with a chlorinated polyethylene containing 48 wt% Cl (CPE48), and PVC with a chlorinated PVC containing 67 wt% Cl (CPVC67). Each binary DOP/chlorinated polymer pair is miscible whereas PVC/CPE48 and PVC/CPVC67 blends are immiscible. DOP/CPE48/PVC and DOP/PVC/CPVC67 ternary blends containing, respectively, more than 55 and 20% DOP exhibit a single glass transition temperature (T_g). The spinodal between the one-T_g zone and the two-T_g zone is symmetrical in the two cases. At high DOP concentrations, a quantitative analysis of the results leads to the conclusion of the presence of a true ternary phase. At low DOP concentrations where two T_gs are observed, the DOP is distributed equally between the two chlorinated polymers forming, in the DOP/CPE48/PVC case for instance, two binary DOP/CPE48 and DOP/PVC phases. The broad immiscibility zone observed in the DOP/CPE48/PVC ternary blend as compared to the DOP/PVC/CPVC67 blend appears to be mainly caused by the high molecular weight of CPE48, as compared with PVC and CPVC67. © 1994 John Wiley & Sons. Inc.     

Preparation,Tg improvement,and thermal stability enhancement mechanism of soluble poly(methyl methacrylate) nanocomposites by incorporating octavinyl polyhedral oligomeric silsesquioxanes

The soluble poly(methyl methacrylate‐co‐octavinyl‐polyhedral oligomeric silsesquioxane) (PMMA–POSS) hybrid nanocomposites with improved T_g and high thermal stability were synthesized by common free radical polymerization and characterized using FTIR, high‐resolution ¹H NMR, ²⁹Si NMR, GPC, DSC, and TGA. The POSS contents in the nanocomposites were determined based on FTIR spectrum, revealing that it can be effectively adjusted by varying the feed ratio of POSS in the hybrid composites. On the basis of the ¹H NMR analysis, the number of the reacted vinyl groups on each POSS molecules was determined to be about 6–8. The DSC and TGA measurements indicated that the hybrid nanocomposites had higher T_g and better thermal properties than the pure PMMA homopolymer. The T_g increase mechanism was investigated using FTIR, displaying that the dipole–dipole interaction between PMMA and POSS also plays very important role to the T_g improvement besides the molecular motion hindrance from the hybrid structure. The thermal stability enhances with increase of POSS content, which is mainly attributed to the incorporation of nanoscale inorganic POSS uniformly dispersed at molecular level. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5308–5317, 2007     

The effect of stoichiometry on curing and properties of epoxy–clay nanocomposites

Epoxy–clay nanocomposites have been prepared with an organically modified montmorillonite. The epoxy network was based on diglycidyl ether of bisphenol A (DGEBA) cured with diaminodiphenylmethane (DDM). The stoichiometry DGEBA–DDM was varied, the molar ratio of amine hydrogen/epoxy groups, r, ranged from 0.85 to 1.15. The influence of stoichiometry on curing and properties of the nanocomposites was studied using differential scanning calorimetry, dynamic mechanical thermal analysis and X-ray diffraction. All nanocomposites had intercalated clay structures. The clays accelerated the curing reaction whose rate was also increased when increasing r. The heat of reaction, −ΔH (J/g epoxy), increased as r increased, reaching a constant value for r ≥ 1. In the presence of clays −ΔH was lower than in the neat DGEBA–DDM. The glass transition temperature (T _g) of the neat epoxy thermosets reached a maximum at r = 1; however, the nanocomposites showed the T _g maximum at 0.9 < r < 1. The presence of clay lowered the T _g for r > 0.94 and raised T _g for r ≤ 0.85. The elastic modulus of neat epoxy thermosets reached a maximum in the rubber state and a minimum in the glassy state at r = 1. The nanocomposites showed similar behavior, but the maximum and the minimum values of the elastic modulus were reached at stoichiometry r < 1. The comparison of the properties of neat epoxy with those of the nanocomposites varying the stoichiometry indicates that the clay itself induces stoichiometric changes in the system.     

PVC/MMT nanocomposites

Poly(vinyl chloride) (PVC) nanocomposites with sodium montmorillonite (Na-MMT) and organically modified MMT (O-MMT) have been prepared by melt processing using mixing and extrusion techniques. The differential scanning calorimetry (DSC) with stochastic temperature modulation (TOPEM?) results show that the glass transition temperature (T _g) of PVC is slightly higher than T _g of PVC/Na-MMT and PVC/O-MMT which would indicate that MMT plays a role of an internal plasticizer that increases the distance between the PVC macrochains. The DSC TOPEM non-reversing heat flow profiles show enthalpy relaxation effects, and the lowest value has been found for pristine PVC—the presence of MMT (both Na+ and ammonium salt modified) may generate a certain orientation level of PVC macrochains during the extrusion process. Specific heat vs temperature dependencies at different frequencies revealed that the best fit to the single profile was found for PVC/Na-MMT nanocomposite, and this observation may be related to internal stability of the composite material as confirmed by analysis of the change in the specific heat (Δc _p).     

Preparation and properties of enhanced nanocomposites based on PLA/PC blends reinforced with silica nanoparticles

In order to lower brittleness of biobased polylactic acid (PLA), its blending with polycarbonate and nanosilica is aimed. In this line, to increase compatibility of the ingredients, dicumyl peroxide (DCP) and Cobalt (II) acetylacetonate (Co) were used as grafting and transesterification catalysts, respectively. The X‐ray diffraction (XRD) spectra demonstrated high compatibility of the ingredients by broadening of the PLA characteristic peaks and, also, good dispersion of nanosilica particles, especially in PLA/PC/Silica/Co sample. The EDX maps confirmed good nanosilica dispersion, too. The silica nanoparticle size was ranged from 20 to 100 nm in transmission electron microscopy (TEM) pictures. All nanocomposites showed improved thermal stability in thermogravimetric analysis (TGA). Differential scanning calorimetry (DSC) results demonstrated lower T_g, T_m, and crystallinity values for the fabricated nanocomposites. Notably, the dynamic mechanical thermal analysis (DMTA) curves confirmed the T_g, T_m, and T_cc trend obtained in DSC; moreover, much higher surface under tan δ peak for PLA/PC/Silica/Co sample was obtained, which implies its higher toughness. The precise tensile study of the samples confirmed significantly higher elongation at break of the nanocomposites, more considerably in PLA/PC/Silica/Co sample, with nearly negligible defect on tensile strength and modulus. In a concise, the obtained results confirmed the higher efficiency of Co catalyst, which leads to the sample with improved characteristics compared with DCP.     

Kinetic study of the thermal degradation of PS/MMT nanocomposites preparedwith imidazolium surfactants

Styrene and montmorillonite organically modified with imidazolium surfactants (MMT) at various alkyl chain lengths (C₁₂, C₁₆ and C₁₈) were used to prepare the corresponding PS/MMT/C₁₂, PS/MMT/C₁₆ and PS/MMT/C₁₈ nanocomposites by in situ polymerization. XRD and TEM analyses evidenced the formation of both intercalated and exfoliated structures. The glass transition temperatures (T _g) of nanocomposites, as well as that of neat PS, were obtained by DSC measurements. The thermal degradations were carried out in the scanning mode, in both inert and oxidative environments, and the initial temperatures of decomposition (T _i) and the apparent activation energies of degradation (E _a) were determined. Due to an oxidative degradation mechanism, the T _i and E _a values in air atmosphere were lower than those under nitrogen. The results indicated that nanocomposites are more thermally stable than polystyrene, and suggested an increasing degree of exfoliation as a function of alkyl chain length of surfactant, associated with enhancing thermal stability.     

Dispersion of silica nanoparticles bearing perfluorohexyl units into fluorinated copolymers

This study aims at determining the compatibility behavior of nanoparticles surface with fluorinated matrices to obtain a homogenous dispersion and better composites properties. First, modified silica nanoparticles by C₆F₁₃I and C₆F₁₃‐C₂H₄‐SH led to various fluorinated silica of different massic concentrations and grafting rates. The dispersion of these nanoparticles (in 5 wt %) into molten poly(VDF‐co‐HFP) and poly(TFE‐co‐HFP) matrices were studied as well as the hydrophobic, mechanical, and thermal properties of both fluorinated copolymers and resulting composites. In both series, the storage modulus of nanocomposites increased while the melting (T_m) and decomposition (T_10%) temperatures varied with the polymer matrix. They increased for poly(VDF‐co‐HFP) composites (T_m= 134 to 144 °C and T_10%= 441 to 464 °C) but decreased for poly(TFE‐co‐HFP) nanocomposites (T_m= 276 to 268 °C and T_10%= 488 to 477 °C). © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1512–1522     

Synergistic effects of layered double hydroxide with hyperfine magnesium hydroxide in halogen-free flame retardant EVA/HFMH/LDH nanocomposites

The synergistic effects of layered double hydroxide (LDH) with hyperfine magnesium hydroxide (HFMH) in halogen-free flame retardant ethylene-vinyl acetate (EVA)/HFMH/LDH nanocomposites have been studied by X-ray diffraction (XRD), transmission electron spectroscopy (TEM), thermogravimetric analysis (TGA), limiting oxygen index (LOI), mechanical properties' tests, and dynamic mechanical thermal analysis (DMTA). The XRD results show that the exfoliated EVA/HFMH/LDH can be obtained by controlling the LDH loading. The TEM images give the evidence that the organic-modified LDH (OM-LDH) can act as a disperser and help HFMH particles to disperse homogeneously in the EVA matrix. The TGA data demonstrate that the addition of LDH can raise 5-18 °C thermal degradation temperatures of EVA/HFMH/LDH nanocomposite samples with 5-15 phr OM-LDH compared with that of the control EVA/HFMH sample when 50% weight loss is selected as a point of comparison. The LOI and mechanical tests show that the LDH can act as flame retardant synergist and compatilizer to apparently increase the LOI and elongation at break values of EVA/HFMH/LDH nanocomposites. The DMTA data verify that the T_g value (−10 °C) of the EVA/HFMH/LDH nanocomposite sample with 15 phr LDH is much lower than that (T_g = −2 °C) of the control EVA/HFMH sample without LDH and approximates to the T_g value (−12 °C) of pure EVA, which indicates that the nanocomposites with LDH have more flexibility than that of the EVA/HFMH composites.     

Physical and electronic properties in multiwalled carbon nanotube–poly(3‐dodecylthiophene) nanocomposites

The properties of nanocomposites of dodecyl ester functionalized multiwalled carbon nanotube (FMWNT) and four poly(3‐dodecyl thiophene) (P3DDT) samples with different molecular weight and chain regioregularity are reported here. Uniform dispersion of FMWNT in the composites is evident from TEM study. π–π and CH–π interactions are evident from FTIR spectra in the low molecular weight (M_w = 8 × 10⁴) and high regiorandom (head‐tail = 69 mol %) P3DDT (ILM) composites; however, such interactions are not so prominent for other P3DDTs. Wide‐angle X‐ray scattering patterns indicate intact interchain lamellar structure of P3DDT in the composites. DSC study shows decrease of main chain melting peak of P3DDT (ILM) with increasing F‐MWNT content but the decrease is lower with higher molecular weight and higher regioregular samples. Dynamic mechanical analyzer study indicates that there is no significant change in the T_g, T_β, and T_γ transition temperature with FMWNT concentration indicating almost ideal mixing of the components. The percent increase of G′ increases with increasing FMWNT loading and also with temperature showing an 84% increase in storage modulus at –20 °C for ILM12 samples. The UV–vis spectrum indicates a decrease in band gap with FMWNT concentration for ILM composites, however, it is negligible with other P3DDTs. Photoluminescence quenching and multiple emission peaks occur in the composites. dc‐Conductivity of the composites increases by two orders and current‐voltage (I–V) curves show memory effect only in ILM‐MWNT composites. The I–V curves of other P3DDT nanocomposites exhibit rectification property. Quantitative explanation of electronic properties has been afforded from the band energy and work function values. So, the electronic properties of the nanocomposite can be tuned by changing the molecular weight, regioregularity, and concentration of FMWNT. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1412–1425, 2009     

Polymer–nanoparticle interfacial interactions in polymer nanocomposites: Confinement effects on glass transition temperature and suppression of physical aging

The effects of confinement on glass transition temperature (T_g) and physical aging are measured in polystyrene (PS), poly(methyl methacrylate) (PMMA), and poly(2-vinyl pyridine) (P2VP) nanocomposites containing 10- to 15-nm-diameter silica nanospheres or 47-nm-diameter alumina nanospheres. Nanocomposites are made by spin coating films from sonicated solutions of polymer, nanofiller, and dye. The T_gs and physical aging rates are measured by fluorescence of trace levels of dye in the films. At 0.1–10 vol % nanofiller, T_g values can be enhanced or depressed relative to neat, bulk T_g (T_g,bulk) or invariant with nanofiller content. For alumina nanocomposites, T_g increases relative to T_g,bulk by as much as 16 K in P2VP, decreases by as much as 5 K in PMMA, and is invariant in PS. By analogy with thin polymer films, these results are explained by wetted P2VP–nanofiller interfaces with attractive interactions, nonwetted PMMA–nanofiller interfaces (free space at the interface), and wetted PS–nanofiller interfaces lacking attractive interactions, respectively. The presence of wetted or nonwetted interfaces is controlled by choice of solvent. For example, 0.1–0.6 vol % silica/PMMA nanocomposites exhibit T_g enhancements as large as 5 K or T_g reductions as large as 17 K relative to T_g,bulk when films are made from methyl ethyl ketone or acetic acid solutions, respectively. A factor of 17 reduction of physical aging rate relative to that of neat, bulk P2VP is demonstrated in a 4 vol % alumina/P2VP nanocomposite. This suggests that a strategy for achieving nonequilibrium, glassy polymeric systems that are stable or nearly stable to physical aging is to incorporate well-dispersed nanoparticles possessing attractive interfacial interactions with the polymer. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2935–2943, 2006     

Glass transition of polymer/single-walled carbon nanotube composite films

The glass-transition temperatures (T_g's) of nanocomposites of polystyrene (PS) and single-walled carbon nanotubes were measured in the bulk and in thin films with differential scanning calorimetry and spectroscopic ellipsometry, respectively. The bulk T_g of the nanocomposites increased by approximately 3 °C and became much broader than that of PS. For the nanocomposite films thinner than 45 nm, T_g decreased with decreasing film thickness [i.e., ΔT_g(nano) < 0]. This phenomenon also occurred in thin PS films, the magnitude of the depression in PS [ΔT_g(PS)] being somewhat larger. The film thickness dependence and the differences in the magnitude of ΔT_g in the two systems were examined in light of current theory, and a quantitative comparison was made. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 3339–3345, 2003     

Equations of state for polyamide‐6 and its nanocomposites. II. Effects of clay

The pressure‐volume‐temperature (PVT) dependencies of polyamide‐6 and its nanocomposites (polymeric nanocomposites) were measured at temperatures T = 300–600 K and pressures P = 0.1–190 MPa, thus spanning the range of molten and “solid” phases. The Simha‐Somcynsky (S‐S) cell‐hole equation of state (EOS) was used for describing the molten region. At T_g(P) ≤ T ≤ T_m(P), the “solid” phase is a mixture of the liquid polyamide‐6 with dispersion of crystals. Accordingly, the PVT behavior in this region was described as a combination of the S‐S EOS for the liquid phase and the Midha‐Nanda‐Simha‐Jain (MNSJ) EOS for the crystalline one. These two theories based on different models yielded two sets of the characteristic reducing parameters, P^*, T^*, V^* and the segmental molecular weight, M_s. Incorporation of 2 and 5 wt % clay increased P^* and reduced T^* and V^*, but the effects were small. Fitting the combination of S‐S and MNSJ EOS' to isobaric “solid” phase data yielded the total crystallinity, X_cryst, and the correcting excess specific volume, ΔV_m,c. Both parameters were sensitive to pressure, P, and the clay content, w—the former increased with P and w, whereas the latter decreased. The raw PVT data were numerically differentiated to obtain the thermal expansion and compressibility coefficients, α and κ, respectively. At T < T_m, addition of clay reduced their relative magnitude, whereas at T > T_m, the opposite effect was observed, most likely owing to the excess of intercalant in the polymeric nanocomposites samples. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 966–980, 2009     

Novel triblock siloxane copolymers: Synthesis,characterization, and their use as surface modifying additives

Synthesis of novel triblock, polycaprolactone-b-polydimethylsiloxane (PDMS) and poly(2-ethyl-oxazoline)-b-PDMS copolymers were demonstrated. These materials were obtained via the ring-opening polymerization of ?-caprolactone or 2-ethyl-2-oxazoline monomers by using organofunctionally terminated PDMS oligomers as initiators and comonomers. Segment molecular weights in these copolymers were varied over a wide range between 1000 and 2000 g/mol and the formation of copolymers with desired backbone compositions were monitored by ¹H-NMR spectroscopy and GPC. DSC and TMA studies showed the formation of two phase morphologies with PDMS (T_g, ?120°C) and polycaprolactone (T_m, 50–60°C) or poly(2-ethyl-2-oxazoline) (T_g, 40-60°C) transitions respectively. The use of polycaprolactone-b-PDMS copolymers as surface modifying additives in polymer blends were also investigated. When these copolymers were blended at low levels (0.25–10.0% by weight) with various commercial resins such as, polyurethanes, PVC, PMMA, and PET, the resulting systems displayed silicone-like, hydrophobic surface properties, as determined by critical surface tension measurements or water contact angles. The effect of siloxane content, block length, base polymer type and morphology on the resulting surfaces are discussed.     

Curing kinetics,thermal, mechanical,and dielectric properties based on o‐cresol formaldehyde epoxy resin with polyhedral oligomeric (N‐aminoethyl‐γ‐amino propyl)silsesquioxane

The curing reaction and kinetics of o‐cresol formaldehyde epoxy resin (o‐CFER) with polyhedral oligomeric silsesquioxane of N‐aminoethyl‐γ‐amino propyl group (AEAP‐POSS) were investigated by differential scanning calorimetry (DSC). The thermal, mechanical, and dielectric properties of o‐CFER/AEAP‐POSS nanocomposites were investigated with thermogravimetric analysis (TGA), torsional braid analysis (TBA), tensile tester, impact tester, and electric analyzer, respectively. The results show that the activation energy (E) of curing reaction is 58.08 kJ/mol, and the curing reaction well followed the ?esták‐Berggren (S‐B) autocatalytic model. The glass transition temperature (T_g) increases with the increase in AEAP‐POSS content, and reaches the maximum, 107°C, when the molar ratio (N_s) of amino group to epoxy group is 0.5. The nanocomposites containing a higher percentage of AEAP‐POSS exhibited a higher thermostability. The AEAP‐POSS can effectively increase the mechanical properties of epoxy resin, and the tensile and impact strengths are 2.84 MPa and 143.25 kJ m^?2, respectively, when N_s is 0.5. The dielectric constant (ε), dielectric loss factor (tan δ), volume resistivity (ρ_v), and surface resistivity (ρ_s) are 4.98, 3.11 × 10^?4, 3.17 × 10¹² Ω cm³, and 1.41 × 10¹² Ω cm², respectively, similarly at N_s 0.5. Copyright © 2009 John Wiley & Sons, Ltd.     

Fabrication and characterization of polyvinyl chloride/poly(styrene-co-maleic anhydride) intercalated functional nanobifiller-based composite paper

The resin infiltration technique was used for impregnation of graphene oxide (GO) and graphene oxide-functional carbon nanotube (GO-ox-CNT) with polyvinyl chloride (PVC) and poly(styrene-co-maleic anhydride) (PSMA) blend. Two series of buckypapers were prepared with GO and GO-ox-CNT content. The morphology of PVC/PSMA/GO composite paper was porous, while PVC/PSMA/GO-ox-CNT revealed exclusive morphology with GO islands and intercalated ox-CNT networks covered with PVC/PSMA. T_max of PVC/PSMA/GO-ox-CNT 0.1 was 571°C, whereas PVC/PSMA/GO 0.1 had a lower value (559°C). T_g of PVC/PSMA/GO-ox-CNT 0.1 was also higher (290°C). Cone calorimetric results showed a decrease in PHRR from 499 (blend) to 186 kW/m² with 0.3 g GO-ox-CNT.     

Heat Dissipation of Flying Wax Moths (Galleria Mellonella) Measured by Means of Direct Calorimetry

Heat production rates and flight speed of adult wax moths (Galleria mellonella) were investigated by means of direct calorimetry at T_A=20 and 30°C. Specific heat production rates were not significantly different between males and females at T_A=20°C (p_TH=747±123.7 mW g^-1, n=5 for males and p_TH=791±169 mW g^-1, n=5 for females) even with females having a higher body mass (M_B=83.8±21.6 mg, n=9 for males and M_B=146.4±25.7 mg, n=11 for females) and wing load. In females, heat production rates were dependent on temperature with higher heat production rates at T_A=20°C (p_TH=791±169 mW g^-1, n=5) than at T_A=30°C (p_TH=441±74 mW g^-1, n=6). Flight speed was also clearly correlated with T_A. Both males and females flew more slowly at T_A=20 than at 30°C. This revised version was published online in August 2006 with corrections to the Cover Date.