原位聚合法制备聚乳酸/黄腐植酸季铵盐插层皂石纳米复合材料及其结构表征

以新疆地产风化煤(weathered coal)为原料通过硝酸氧解工艺制备黄腐植酸(fulvic acid,FA),并对黄腐植酸进行季铵化改性,合成黄腐植酸季铵盐(quaternary fulvic acid,QFA).以皂石为原料通过超声波辐照法制备黄腐植酸季铵盐插层皂石(QFA-saponite).以丙交酯和QFA-saponite为原料,在辛酸亚锡催化作用下,制备了聚乳酸/黄腐植酸季铵盐插层皂石(PLA/QFA-saponite)纳米复合材料.通过正交实验探讨了聚合时间、聚合温度、催化剂和QFA-saponite加量对PLA分子量的影响,其最优反应条件为反应12 h、辛酸亚锡加量3%、温度150℃、QFA-saponite加量为2%,该正交优化条件下合成的PLA/QFA-saponite纳米复合材料的重均分子量可达95300.红外光谱分析表明黄腐植酸中引入了季铵根离子.X-射线衍射(XRD)对QFA-saponite的分析表明,QFA-saponite呈现部分剥离与插层共存的状态,其层间距达到1.57 nm,比皂石层间距增大0.17nm.用XRD、示差扫描量热仪(DSC)、偏光显微镜(POM)、热重分析(TGA)等方法对复合材料进行结构表征.结果表明,PLA/QFA-saponite纳米复合材料具有剥离型结构,QFA-saponite有效改善复合材料的结晶性能和热稳定性.抗菌实验表明,黄腐植酸季铵盐插层皂石对大肠杆菌(Escherichia coli),枯草杆菌(Bacillus subtilis),黑曲霉菌(Aspergillus)及青霉(Penicillium)有较强的抑菌效果,同时聚乳酸/黄腐植酸季铵盐插层皂石纳米复合材料也有良好的抗菌性能.     

聚乳酸/氧化锌柱撑皂石纳米复合材料制备与性能及结构表征

通过微波水解法制备了ZnO柱撑皂石,并以其为加工助剂制备了聚乳酸(PLA)/ZnO柱撑皂石纳米复合材料.通过X射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、对ZnO柱撑皂石及PLA/ZnO柱撑皂石纳米复合材料的结构进行了表征,并对其力学性能和热稳定性能进行了测试.微观结构分析表明,ZnO柱撑皂石呈现剥离状,并均匀分散在PLA基质中.力学性能研究表明0.3%ZnO柱撑皂石的加入有助于改善PLA复合材料的断裂伸长率.SEM分析表明PLA复合材料的断面发生明显改变,表现良好韧性;DSC结果显示纳米ZnO柱撑皂石可以降低复合材料的玻璃化转变温度、结晶温度,有助于提高PLA复合材料的结晶度,与XRD分析相吻合;热重分析表明ZnO柱撑皂石可以提高PLA复合材料的热稳定性.测试结果表明,ZnO柱撑皂石在PLA基质中起到了异相成核的作用,促进了PLA基质的结晶.     

纳米纤维素/聚乳酸全绿色纳米复合材料的制备及性能

制备得到纳米纤维素(NC),其为横向尺寸20~40 nm、长度400~2000 nm的纳米丝.对NC进行醋酸酯化疏水改性得到醋酸酯化纳米纤维素(ANC).分别将NC和ANC与聚乳酸(PLA)复合制备纳米复合材料,研究了NC添加量、疏水改性及与PLA的复合方式对PLA力学性能和结晶性能的影响规律.结果表明,采用溶液浇铸法制备纳米复合膜时,ANC在PLA基体中的分散性优于NC,但是对于复合膜拉伸性能的改善不明显.DSC等温结晶结果表明,ANC可以提高PLA的结晶度和结晶速率;采用熔融复合法制备的NC/PLA纳米复合材料,不仅保持了PLA的高强度、高模量和较高的热稳定性,而且显著改善了其韧性,当NC添加量为3.5%(质量分数)时,断裂伸长率比纯PLA提高了12.1倍.     

悬浮缩聚法制备酚醛树脂/蒙脱土纳米复合材料

采用悬浮缩聚方法在酸性催化剂作用下制备了酚醛树脂/蒙脱土纳米复合材料。以三种不同的蒙脱土：天然土、带有脂肪链季铵盐修饰蒙脱土和带有苯环基团的插层剂修饰的蒙脱土为原料制备了纳米复合材料,并考察了不同插层剂对纳米复合材料形貌的影响,发现带有苯环的插层剂修饰的蒙脱土与酚醛树脂的相容性能更好;研究了固化过程对纳米复合材料形貌的影响,XRD和TEM的结构表明固化过程可以促进带有脂肪链季铵盐修饰的蒙脱土进一步剥离,对其他两类的影响不大;此外还用TGA研究了纳米复合材料的热性能。     

季铵盐插层MXene复合材料的制备及其电容脱盐性能

以MXene(Ti3C2Tx)为前驱体,采用季铵盐(TTAB、CTAB、STAB)为插层剂,制备季铵盐插层MXene复合材料.研究表明,随着季铵盐烷基碳链原子数的增加,MXene的层间距逐渐增大,复合材料的电容脱盐性能随层间距的增加而逐步提高.NaCl溶液浓度为1000 mg·L-1,工作电压为1.2V时,MXene、...     

羧甲基壳聚糖/有机累托石纳米复合材料及其药物缓释性能研究

利用简单的溶液插层法制备了羧甲基壳聚糖/有机累托石纳米复合材料,其中累托石(REC)用十六烷基三甲基溴化铵进行改性.用X-射线衍射(XRD)、红外光谱(FTIR)和扫描电镜(SEM)表征了该纳米复合材料的微观结构和形态,实验表明羧甲基壳聚糖插层进入了累托石层间,增大了累托石的层间距,并且累托石均匀地分布在羧甲基壳聚糖基体中.以牛血清蛋白(BSA)为药物模型,研究了纳米复合材料与海藻酸钠形成的微球的药物缓释性能.结果显示,该微球对药物的包封率及缓释性能与纯羧甲基壳聚糖微球相比都有较大改善,包封率从56%提高到86%,药物缓释时间从24 h上升到72 h.并且纳米复合材料/海藻酸钠微球的释药具有pH响应性,在pH为1.2的条件下释药慢,而在pH为7.4时释药快,可用于小肠或结肠定位缓释系统.因此,羧甲基壳聚糖/有机累托石纳米复合材料很有潜力作为药物载体.     

壳聚糖/蒙脱土纳米复合材料的结构与性能研究

以壳聚糖和蒙脱土为原料,将插层复合技术引入天然高分子材料进行改性,制备了壳聚糖/蒙脱土纳米复合材料.红外光谱和X射线衍射分析结果表明,壳聚糖分子已插入蒙脱土层间,形成了插层甚至部分剥离的结构.热重分析、扫描电镜和物理性能测试表明,蒙脱土的引入,大幅度地降低了壳聚糖的热分解速率,明显地提高了壳聚糖的热稳定性和力学性能,有效地抑制了壳聚糖的溶胀.     

HPMA/OMMT和HPMA/CPMI/OMMT纳米复合材料的制备与表征

通过甲基丙烯酸羟丙酯(HPMA)单体与N-(4-羧基苯基)马来酰亚胺(CPMI)单体在有机蒙脱土(OMMT)中经原位插层自由基聚合反应制备了聚合物-无机纳米复合材料.OMMT由钠基蒙脱土通过十六烷基溴化铵插层处理制备.通过XRD和TEM对复合材料结构进行了表征,证实HPMA单体和HPMA/CPMI共单体在OMMT中原位插层共聚得到的复合材料均为剥离型纳米复合材料.OMMT含量为3 wt%的PolyHPMA/OMMT纳米复合材料起始分解温度为250℃,比相应的纯聚合物的热分解温度提高30℃.随着OMMT含量的增加,热分解温度进一步提高.但在测试温度范围内,PolyHPMA/OMMT纳米复合材料均没有出现明显的玻璃化转变温度.     

新环氧树脂纳米复合材料的合成和结构研究

以具有层状硅酸盐结构的累托石(REC)为主体,以烷基季铵盐为改性剂合成了有机累托石(OREC),以有机累托石和环氧树脂复合,制备出纳米复合材料。累托石含量在0.8wt.% 时,纳米复合材料具有最佳力学和热学性能,冲击强度增加到65.6 kJm-2,断裂伸长率从4.7 %增加到20.2 %,玻璃化转变温度提高到 197.9 ℃。用X-小角衍射法、透射电镜和红外吸收光谱研究了材料的微观结构,XRD 衍射图显示,未经处理REC 的层间距d001 = 2. 2 nm,经有机改性后,累托石片层间距扩大到2.8 nm,与环氧树脂复合后,其层间距扩大到4.2 nm 左右,FT-IR图显示,有机累托石中出现十六胺的特征吸收峰,TEM照片显示该复合材料是一种纳米复合材料。     

新型载药壳聚糖季铵盐的合成、结构与性能

通过羧甲基壳聚糖接枝二甲基十八烷基环氧丙基氯化铵, 制备了一系列不同取代度和分子量的羧甲基壳聚糖十八烷基季铵盐(QACMC). 用傅立叶变换红外(FTIR)光谱、核磁共振谱(1H-NMR)、X射线衍射(XRD)谱、差式扫描量热法(DSC)等对其分子结构、结晶和热性能进行研究, 同时研究QACMC的吸湿保湿性能, 并与透明质酸(HA)、壳聚糖(chitosan)和羧甲基壳聚糖(CMC)进行比较. 结果表明, QACMC具有较好的结晶性和热稳定性, 结晶度可达72.3%; 其吸湿保湿性低于透明质酸(HA)和羧甲基壳聚糖, 而受季铵基团取代度和QACMC分子量的影响, 羧酸盐和季铵盐两种亲水基团对QACMC吸湿性的影响不具有协同作用; QACMC对亲脂性药物盐酸米诺环素的载药率可达10.9%(质量分数), 远高于壳聚糖和羧甲基壳聚糖.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.