High-pressure studies on azido-tetrazole chain–ring conversion in crystalline 2-azido-4,6-dichloro-1,3,5-triazine

First-principle calculations have allowed us to gain insight into the high-pressure effect on the azide-tetrazole chain–ring conversion of crystalline 2-azido-4,6-dichloro-1,3,5-triazine in the range of 0–90?GPa. The local density approximation with Ceperley-Alder exchange–correlation potential parameterized by Perdew and Zunger has been adopted. With the increase in pressure, the unit cell lattice parameters (a, b, and c), molecular geometries (bond lengths, interatomic distance, and bond angles), atom charges, bond populations, band gap, and density of states change gradually and regularly except at 13, 47, and 59?GPa due to the structural transformation. The azido angle reaches to the maximum at 12?GPa and then bends to 170.76° at 13?GPa, but the azido group is approximately linear. From 47?GPa, the azido group loses the linearity and bends evidently. When the pressure is boosted to 59?GPa, the azido group cyclizes completely and a five-membered tetrazole ring is built, that is, the azide-tetrazole chain–ring conversion occurs. This tetrazole structure keeps unchanged under higher pressures till 90?GPa. The volumes of unit cell and densities vary stably, and no obvious discontinuity happens owing to the structural transformation, while a small discontinuity appears in the total energy at 59?GPa. The calculated thermodynamic functions suggest that the azide-tetrazole conversion may be facile to progress according to the fundamentals of chemical thermodynamics.     

Energetic 4,4′‐Oxybis[3,3′‐(1‐hydroxytetrazolyl)]furazan and Its Salts

Energetic compounds that incorporate multiple nitrogen‐rich heterocycles are of great interest for high‐density energetic materials. A facile synthetic strategy to combine an oxy bridge and furazan groups, as well as tetrazole‐ols, into a molecule ( 5 ) was found. Some energetic salts based on 5 were prepared by neutralization. All of the compounds were fully characterized. Additionally, the structure of 7 has been elucidated by single‐crystal XRD analysis. Physicochemical and energetic properties were also studied; these show that these newly designed energetic salts exhibit good thermal stabilities. Hydroxylammonium salt ( 6 ) has a detonation performance and sensitivities comparable with those of 1,3,5‐trinitroperhydro‐1,3,5‐triazine (RDX).     

Synthesis and Characterization of the New Heterocycle 5‐(4‐Amino‐1,2,4‐triazol‐3‐on‐5′‐yl)‐1H‐tetrazole and Some Ionic Nitrogen‐Rich Derivatives

A new heterocycle consisting of a tetrazole ring attached to an amino‐triazolone ring, namely 5‐(4‐amino‐1,2,4‐triazol‐3‐on‐5′‐yl)‐1H‐tetrazole ( 3 ) as well as its ammonium ( 2 ), hydroxylammonium ( 3 ), and sodium salt ( 4 ), is introduced. Its ammonium salt ( 2 ) is formed starting from tetrazole‐5‐carboxamide oxime ( 1 ), which is reacted with diaminourea (carbonyldihydrazide) in aqueous media. All compounds 2 , 3 , 4 , 5 were structurally characterized by single crystal X‐ray diffraction. The thermal behavior was investigated using differential scanning calorimetry, and the sensitivities towards impact, friction, and electrostatic discharge were determined. Furthermore, several detonation parameters were calculated with the program EXPLO5 to determine the potential use of these compounds as highly energetic materials.     

Insensitive and Thermostable Energetic Materials Based on 3‐Ureido‐4‐tetrazole‐furazan: Synthesis,Characterization, and Properties

Energetic salts composed of ureido, furazan, and tetrazole were prepared by simple and efficient chemical routes to explore new insensitive and thermostable energetic materials. 3‐Ureido‐4‐tetrazole‐furazan ( 3 ) and its ammonium salt ( 5 ) and hydrazinium salt ( 6 ) were confirmed by single‐crystal X‐ray diffraction. The thermal stabilities of the synthesized salts were studied using differential scanning calorimetry, and the detonation performances of these salts were calculated using EXPLO 5 V6.01. All the salts exhibit good thermal stability (Td: 148–259 °C) and mechanical sensitivities (IS > 40 J, FS > 360 N), and their detonation velocities range from 7316 to 8655 m · s^–1. Compounds 6 and 10 are potential candidates as novel insensitive and heat‐resistant explosives because of their high detonation temperatures of 247 and 256 °C, good detonation velocities of 8432 and 8523 m · s^–1, and good detonation pressures of 25.6 and 26.8 GPa.     

Computational study of energetic nitrogen‐rich derivatives of 1,1′‐ and 5,5′‐bridged ditetrazoles

Density functional theory method was used to study the heats of formation (HOFs), electronic structure, energetic properties, and thermal stability for a series of bridged ditetrazole derivatives with different linkages and substituent groups. The results show that the ? N₃ group and azo bridge (? N?N? ) play a very important role in increasing the HOF values of the ditetrazole derivatives. The effects of the substituents on the HOMO–LUMO gap are combined with those of the bridge groups. The calculated detonation velocities and detonation pressures indicate that the ? NO₂, ? NF₂, ? N?N? , or ? N(O)?N? group is an effective structural unit for enhancing the detonation performance for the derivatives. An analysis of the bond dissociation energies for several relatively weak bonds suggests that the N? N bond in the ring or outside the ring is the weakest one and the N? N cleavage is possible to happen in thermal decomposition. Overall, the ? CH₂? CH₂? or ? NH? NH? group is an effective bridge for enhancing the thermal stability of the bridged ditetrazoles. Because of their desirable detonation performance and thermal stability, five compounds may be considered as the potential candidates of high‐energy density materials (HEDMs). These results provide basic information for the molecular design of novel HEDMs. © 2011 Wiley Periodicals, Inc. J Comput Chem, 2011     

Synthesis,Structure, and Energetic Properties of 1,5‐Diaminotetrazolium Sulfate Salts

1,5‐diaminotetrazolium chloride (DATC) and 1,5‐diaminotetrazolium sulfate (DATS) were synthesized in this work. The structures of DATS and DATC were characterized. The single crystal of DATS was first cultured, and its structure was analyzed. The thermal behavior of DATS was investigated. The activation energy and pro‐exponential factor were calculated, E_k = 120.86 KJ/mol, A_k = 10^12.96 s^?1. The density, heat of formation, detonation pressure, and detonation velocity of DATS were first calculated. The detonation pressure and detonation velocity of DATS are P = 11.877 GPa, D = 5.617 km s^?1, which are smaller than those of 1,5‐diaminotetrazolium nitrate (DATN) (P = 33.3GPa, D = 8.77 km s^?1).     

Synthesis and Characterization of 5‐(1,2,4‐Triazol‐3‐yl)tetrazoles with Various Energetic Functionalities

In this contribution the synthesis and full structural as well as spectroscopic characterization of three 5‐(1,2,4‐triazol‐3‐yl)tetrazoles along with selected energetic moieties like nitro, nitrimino, and azido groups are presented. The main goal is a comparative study on the influence of those variable energetic moieties on structural and energetic properties. A complete characterization including IR and Raman as well as multinuclear NMR spectroscopy of all compounds is presented. Additionally, X‐ray crystallographic measurements were performed and reveal insights into structural characteristics as well as inter‐ and intramolecular interactions. The standard enthalpies of formation were calculated for all compounds at the CBS‐4M level of theory and reveal high positive heats of formation for all compounds. The calculated detonation parameters (using the EXPLO5.05 program) are in the range of 8000 m s^?1 (8097 m s^?1 ( 5 ), 8020 m s^?1 ( 6 ), 7874 m s^?1 ( 7 )). As expected, the measured impact and friction sensitivities as well as decomposition temperatures strongly depend on the energetic moiety at the triazole ring. The C? C connection of a triazole ring with its opportunity to introduce a large variety of energetic moieties and a tetrazole ring, implying a large energy content, leads to the selective synthesis of primary and secondary explosives.     

Synthesis,Crystal Structure,and Thermal Behavior of a Novel Insensitive Energetic Cocrystal Composed of 3,3′‐Bis(1,2,4‐oxadiazole)‐5,5′‐dione and 4‐Amino‐1,2,4‐triazole

A novel insensitive energetic cocrystal consisting of 3,3′‐bis(1,2,4‐oxadiazole)‐5,5′‐dione and 4‐amino‐1,2,4‐triazole in a 1:2 molar ratio was prepared and characterized. The structure of this cocrystal was characterized by single‐crystal X‐ray diffraction. The crystal structure of the cocrystal is a monoclinic system with P1 space group. Properties of the cocrystal studied included thermal decomposition and detonation performance. This cocrystal has a crystal density of 1.689 g · cm^–3 at 173 K and good detonation performance (D = 6940 m · s^–1, P = 20.9 GPa). Moreover, measured impact and friction sensitivities (IS > 40 J, FS > 360 N) show that it can be classified as an insensitive energetic material. Its thermodynamic properties indicate that it has moderate thermal stability with a sharp exothermic peak (244 °C, 5 K · min^–1) and a high critical temperature of thermal explosion (523 K). In view of the observations above, it may serve as a promising alternative to known explosives such as TNT.     

Docking,Synthesis, Spectral Characterization,and Evaluation of In Vitro Antifungal Activity of Bis/Monophenyl‐1‐aryl‐1H‐tetrazole‐5‐carboxylate

Some novel compounds of bis/monophenyl‐1‐aryl‐1H‐tetrazole‐5‐carboxylate were synthesized by the equimolar reaction between bis/mono‐1‐aryl‐1H‐tetrazole and phenyl chloroformate in the presence of NaOH in dry tetrahydrofuran. The content was stirred for 4 h at room temperature. Structures of these synthesized compounds were characterized by IR, ¹H‐NMR, ¹³C‐NMR, and mass spectrometric methods. The in vitro antifungal activity study demonstrates that results of compounds 6g and 6h are excellent, 6e a comparatively good one, and other compounds are moderate. The C docker energy of compounds 6g and 6h were ?38.22 and ?32.62 kcal/mol and that of compound 6e was ?21.26 kcal/mol.     

Toward product control in ring‐opening oligomerization of 9H‐9‐borafluorenes

To get deep insights into the structure–reactivity relationship for ring‐opening oligomerization reactions toward targeted design of novel main‐chain boron‐containing materials, detailed DFT B97D/TZVP calculations are carried out to compare the ring‐opening oligomerization of both unsubstituted and tert‐butyl (tBu)‐substituted 9H?9‐borafluorenes. In contrast to substituent exchange between normal boranes, such reactions are initiated by substituent exchanges involving double B? C? B bridged intermediates. On tBu‐substitution, the B? C? B, and B? H? B bridged dimer intermediate is stabilized mainly due to enhanced barrier of 18.1 kcal/mol toward further trimerization channel and higher isomerization barrier of 22.5 kcal/mol toward the double B? H? B bridged dimer. In good agreement with available experiments, it is clearly shown that various product channels can be efficiently controlled by bulky substitution and by reaction temperatures, pointing out the way toward desired higher oligomers with improved thermal stability. © 2014 Wiley Periodicals, Inc.     

Theoretical Investigation of 4,4′,6,6′‐Tetra(azido)azo‐1,3,5‐triazine‐N‐oxides and the Effects of N→O Bonding on Organic Azides

A family of 4,4′,6,6′‐tetra(azido)azo‐1,3,5‐triazine‐N‐oxides was designed and investigated by theoretical method. The effects of the N→O bond on the properties of TAAT‐N‐oxides, such as density, heat of formation, and detonation performance, were discussed. By comparison with the bond‐dissociation energy of the weakest bond and the electrostatic potentials, the effects of the N→O bond on the stability and impact sensitivity of organic azides were also discussed. The results show that the introduction of N→O bonds at the appropriate positions increases the oxygen balance and density of the compounds, while it has little effect on the stability and impact sensitivity. Consequently, their introduction results in energetic compounds with improved detonation performances.     

Energetic Materials with Promising Properties: Synthesis and Characterization of 4,4′‐Bis(5‐nitro‐1,2,3‐2H‐triazole) Derivatives

Using a variety of functionalization strategies, derivatives of 4, 4′‐bis(5‐nitro‐1,2,3‐2H‐triazole) were designed, synthesized, and characterized. The isomers were separated, their structures were confirmed with single‐crystal X‐ray analysis, and their properties were determined by differential scanning calorimetry, density, impact sensitivity, heat of formation, and detonation velocity and pressure (calculated by EXPLO5 V6.01). Those materials were found to exhibit superior detonation performance when compared with the other fully carbon‐nitrated bis(azoles).     

Energetic Salts Based on Monoanions of N,N‐Bis(1H‐tetrazol‐5‐yl)amine and 5,5′‐Bis(tetrazole)

High‐density energetic salts that contain nitrogen‐rich cations and the 5‐(tetrazol‐5‐ylamino)tetrazolate (HBTA^?) or the 5‐(tetrazol‐5‐yl)tetrazolate (HBT^?) anion were readily synthesized by the metathesis reactions of sulfate salts with barium compounds, such as bis[5‐(tetrazol‐5‐ylamino)tetrazolate] (Ba(HBTA)₂), barium iminobis(5‐tetrazolate) (BaBTA), or barium 5,5′‐bis(tetrazolate) (BaBT) in aqueous solution. All salts were fully characterized by IR spectroscopy, multinuclear (¹H, ¹³C, ¹⁵N) NMR spectroscopy, elemental analyses, density, differential scanning calorimetry (DSC), and impact sensitivity. Ba(HBTA)₂ ? 4 H₂O crystallizes in the triclinic space group P$\bar 1$ , as determined by single‐crystal X‐ray diffraction, with a density of 2.177 g cm^?3. The densities of the other organic energetic salts range between 1.55 and 1.75 g cm^?3 as measured by a gas pycnometer. The detonation pressure (P) values calculated for these salts range from 19.4 to 33.6 GPa, and the detonation velocities (ν_D) range from 7677 to 9487 m s^?1, which make them competitive energetic materials. Solid‐state ¹³C NMR spectroscopy was used as an effective technique to determine the structure of the products that were obtained from the metathesis reactions of biguanidinium sulfate with barium iminobis(5‐tetrazolate) (BaBTA). Thus, the structure was determined as an HBTA salt by the comparison of its solid‐state ¹³C NMR spectroscopy with those of ammonium 5‐(tetrazol‐5‐ylamino)tetrazolate (AHBTA) and diammonium iminobis(5‐tetrazolate) (A₂BTA).     

First principles study on the structure and electronic properties of 2‐nitrimino‐1‐nitroimidazolidine

The properties of 2‐Nitrimino‐1‐nitroimidazolidine are calculated by using SIESTA code, which adopts the standard Kohn‐Sham self‐consistent density functional method in the local density approximation. The structures and electronic properties are analyzed, and the factors that affect the impact sensitivity are discussed based on the crystal structure, band energy, and projected density of state. The reason for the smaller impact sensitivity compared to RDX (hexahydro‐1,3,5‐trinitro‐1,3,5‐triazine) is also explored from several respects such as the weakest bond dissociation energy in single molecule, and hydrogen bond, band gap in the crystal. © 2008 Wiley Periodicals, Inc. Int J Quantum Chem, 2009     

Crystal structure,thermodynamic properties and detonation characterization of bis(5‐amino‐1,2,4‐triazol‐3‐yl)methane

Bis(5‐amino‐1,2,4‐triazol‐3‐yl)methane (BATZM, C₅H₈N₈) was synthesized and its crystal structure characterized by single‐crystal X‐ray diffraction; it belongs to the space group Fdd2 (orthorhombic) with Z = 8. The structure of BATZM can be described as a V‐shaped molecule with reasonable chemical geometry and no disorder. The specific molar heat capacity (C_p,m) of BATZM was determined using the continuous C_p mode of a microcalorimeter and theoretical calculations, and the C_p,m value is 211.19 J K^?1 mol^?1 at 298.15 K. The relative deviations between the theoretical and experimental values of C_p,m, H_T – H_298.15K and S_T – S_298.15K of BATZM are almost equivalent at each temperature. The detonation velocity (D) and detonation pressure (P) of BATZM were estimated using the nitrogen equivalent equation according to the experimental density; BATZM has a higher detonation velocity (7954.87 ± 3.29 m s^?1) and detonation pressure (25.72 ± 0.03 GPa) than TNT.     

A DFT study on the structure‐property relationship of aminonitropyrazole‐2‐oxides

Density functional theory (DFT) calculations at the B3LYP/aug‐cc‐pVDZ level have been carried out to study the geometry and electronic structures, stability, sensitivity and band gap of the possible isomers of aminonitropyrazole‐2‐oxides. Kamlet‐Jacob equations were used to determine the performance properties of model compounds. The performance properties of model compounds P5, P18, P20, P21, P22, and P23 are higher compared with 2,4,6,8,10,12‐hexanitro‐2,4,6,8,10,12‐hexaazaisowurtzitane (CL‐20) and octanitrocubane (ONC). The heat of explosion, density, detonation velocity and detonation pressure are related to the number and positions of NO₂ and NH₂ groups in pyrazole‐2‐oxide. © 2011 Wiley Periodicals, Inc. Int J Quantum Chem, 2012     

Potassium 4,4′‐Bis(dinitromethyl)‐3,3′‐azofurazanate: A Highly Energetic 3D Metal–Organic Framework as a Promising Primary Explosive

Environmentally acceptable alternatives to toxic lead‐based primary explosives are becoming increasingly important for energetic materials. In this study, potassium 4,4′‐bis(dinitromethyl)‐3,3′‐azofurazanate, comprising two dinitromethyl groups and an azofurazan moiety, was synthesized and isolated as a new energetic 3D metal–organic framework (MOF). Several attractive properties, including a density of 2.039 g cm^?3, a decomposition temperature of 229 °C, a detonation velocity of 8138 m s^?1, a detonation pressure of 30.1 GPa, an impact sensitivity of 2 J, and friction sensitivity of 20 N make 4 a good candidate as a green primary explosive.     

Phosphoryl group differentiating α‐amino acids from β‐ and γ‐amino acids in prebiotic peptide formation

In recent years β‐amino acids have increased their importance enormously in defining secondary structures of β‐peptides. Interest in β‐amino acids raises the question: Why and how did nature choose α‐amino acids for the central role in life? In this article we present experimental results of MS and ³¹P NMR methods on the chemical behavior of N‐phosphorylated α‐alanine, β‐alanine, and γ‐amino butyric acid in different solvents. N‐Phosphoryl α‐alanine can self‐assemble to N‐phosphopeptides either in water or in organic solvents, while no assembly was observed for β‐ or γ‐amino acids. An intramolecular carboxylic–phosphoric mixed anhydride (IMCPA) is the key structure responsible for their chemical behaviors. Relative energies and solvent effects of three isomers of IMCPA derived from α‐alanine (2a–c), with five‐membered ring, and five isomers of IMCPA derived from β‐alanine (4a–e), with six‐membered ring, were calculated with density functional theory at the B3LYP/6‐31G** level. The lower relative energy (3.2 kcal/mol in water) of 2b and lower energy barrier for its formation (16.7 kcal/mol in water) are responsible for the peptide formation from N‐phosphoryl α‐alanine. Both experimental and theoretical studies indicate that the structural difference among α‐, β‐, and γ‐amino acids can be recognized by formation of IMCPA after N‐phosphorylation. © 2003 Wiley Periodicals, Inc. Int J Quantum Chem 94: 232–241, 2003     

5,5′‐Hydrazinebistetrazole: An Oxidation‐stable Nitrogen‐rich Compound and Starting Material for the Synthesis of 5,5′‐Azobistetrazolates

All 5,5′‐hydrazinebistetrazoles reported in the literature are sensitive to oxidation and react with atmospheric oxygen to yield the corresponding 5,5′‐azobistetrazolates on time. Herewith, we report on the synthesis of the free acid 5,5′‐hydrazinebistetrazole (HBT) which showed to be stable on air for extended periods of time. The compound was fully characterized by analytical and spectroscopic methods and its X‐ray structure was determined by diffraction techniques. Besides, we determined its explosive properties by BAM methods and calculated its heat of formation (+414 kJ mol^?1), detonation velocity (8523 m s^?1) and detonation pressure (27.7 GPa). HBT proved to be very safe to handle (impact sensitivity: >30 J, friction sensitivity: ～108 N) and was used as a starting material for the synthesis of some already reported 5,5′‐azobistetrazolates: NH₄⁺, NH₂NH₃⁺, Li⁺, Na⁺, K⁺, Rb⁺, Cs⁺, Mg²⁺, Ca²⁺, Sr²⁺ and Ba²⁺.     

Synthesis,Characterization, and Energetic Properties of 6‐Amino‐tetrazolo[1,5‐b]‐1,2,4,5‐tetrazine‐7‐N‐oxide: A Nitrogen‐Rich Material with High Density

The synthesis and energetic properties of a novel N‐oxide high‐nitrogen compound, 6‐amino‐tetrazolo[1,5‐b]‐1,2,4,5‐tetrazine‐7‐N‐oxide, are described. Resulting from the N‐oxide and fused rings system, this molecule exhibits high density, excellent detonation properties, and acceptable impact and friction sensitivities, which suggests potential applications as an energetic material. Compared to known high‐nitrogen compounds, such as 3,6‐diazido‐1,2,4,5‐tetrazine (DiAT), 2,4,6‐tri(azido)‐1,3,5‐triazine (TAT), and 4,4′,6,6′‐tetra(azido)azo‐1,3,5‐triazine (TAAT), a marked performance and stability increase is seen. This supports the superior qualities of this new compound and the advantage of design strategy.