Trace Determination of Benzalkonium Chlorides in River and Wastewater by Capillary Electrophoresis following Solid‐Phase Extraction Coupled with Salting‐Out Extraction

Trace levels analysisbenzalkonium chlorides (BAKs) in river water and wastewater treatment plants (WWTP) effluents were determined by capillary electrophoresis (CE) following solid‐phase extraction (SPE) and salting‐out extraction. Salting‐out extraction using an appropriate ratio of sodium chloride (NaCl) and acetonitrile (ACN) mixed with concentrated SPE elutant was capable of providing more than 500‐fold enhancement in detection sensitivity. The ratios of ACN and NaCl for salting‐out extraction were investigated and optimized. Matrix interference was eliminated by salting‐out extraction. Limits of quantitation of BAK homologues were achieved at 0.1 μg/L in 250 mL water samples. Recoveries of BAKs in various spiked water samples ranged from 70% to 84% with relative standard deviation (RSD) less than 9%. Trace amounts of total BAKs were detected in river water and WWTP effluent samples ranging from 27 to 145 μg/L at the first time by CE.     

Determination of Amantadine Residue in Honey by Solid‐phase Extraction and High‐performance Liquid Chromatography with Pre‐column Derivatization and Fluorometric Detection

Amantadine (AMA) is an anti‐viral drug used in apiculture to protect honeybee against the sacbrood virus (Morator aetatulae). This study described a reliable high‐performance liquid chromatographic (HPLC) method for analyzing AMA in honey using a solid‐phase extraction (SPE) cartridge (Plexa PCX) for purification, 4‐fluoro‐7‐nitro‐2,1,3‐benzoxadiazole (NBD‐F) as a pre‐column derivatization agent, and fluorometric detection (λ_ex=470 nm, λ_em=530 nm). The chromatographic separation was performed on an XDB C18 column (150×4.6 mm i.d.) using 0.1% trifluoroacetic acid/acetonitrile (35:65,V/V) as the mobile phase at a flow rate of 1.0 mL·min⁻¹ with a run time of 20 min. Under these optimal conditions, a linear relationship was observed in the range of 0.025–1.0 µg· mL⁻¹ with a good correlation coefficient (0.998) and low limit of detection (0.0080 µg·g⁻¹), the recoveries were all above 90%, and the intra‐day and inter‐day precision (RSD) ranged from 3.4%–5.1%.     

Dispersive Micro Solid‐phase Extraction Coupled with Ultrasound‐assisted Solvent Desorption for Determination of Synthetic Polycyclic and Nitro‐aromatic Musks in Aqueous Samples

An optimized method for the determination of five synthetic polycyclic: celestolide (ADBI), phantolide (AHMI), traseolide (ATII), galaxolide (HHCB), tonalide (AHTN), and two nitro‐aromatic musks: musk xylene (MX) and musk ketone (MK), in water samples is described. The method involves a dispersive micro solid‐phase extraction (D‐μ‐SPE) plus ultrasound‐assisted solvent desorption (UASD) prior to their determination by gas chromatography‐mass spectrometry (GC‐MS) using the selected ion storage (SIS) mode. Factors affecting the extraction efficiency of the target analytes from water samples and ultrasound‐assisted solvent desorption were optimized by a Box‐Behnken design method. The optimal extraction conditions involved immersing 10.1 mg of a typical octadecyl (C18) bonded silica adsorbent (i.e., ENVI‐18) in a 50 mL water sample. After 10.4 min of extraction by vigorously shaking, the adsorbent was collected and dried on a filter, and the target musks were desorbed by ultrasound‐assisted for 38 sec with n‐hexane (200 μL) as the desorption solvent. A 10 μL aliquot was then directly determined by large‐volume injection GC‐MS. The limits of quantitation (LOQs) were 1.2 to 5 ng/L. The precision for these analytes, as indicated by relative standard deviations (RSDs), were less than 11% for both intra‐ and inter‐day analysis. Accuracy, expressed as the mean extraction recovery, was between 74% and 92%. A preliminary analysis of the effluents from municipal wastewater treatment plants (MWTP) and river water samples revealed that HHCB and AHTN were the two most commonly detected synthetic musks; their concentration were determined to range from 88 to 690 ng/L for effluent samples, and 5 to 320 ng/L for river water samples. This is a simple, low cost, effective, and eco‐friendly analytical method.     

超高效液相色谱荧光法检测调味品中罗丹明B残留量

建立了固相萃取净化超高效液相荧光测定调味品中罗丹明B的方法。样品中的罗丹明B经水提取,Strata-X-CW SPE柱萃取净化,用超高效液相色谱（荧光检测器）进行测定。结果表明：罗丹明B在0.1～1 000.0 ng/mL范围内呈现良好的线性关系,相关系数为0.999 86;在1.0～100.0μg/kg添加水平时,平...     

Solid‐phase Extraction Coupled Simple On‐line Derivatization Gas Chromatography – Tandem Mass Spectrometry for the Determination of Benzophenone‐type UV Filters in Aqueous Samples

The rapid determination of three benzophenone‐type UV filters: 2‐hydroxy‐4‐methoxy‐benzophenone (BP‐3), 2,4‐dihydroxybenzophenone (BP‐1) and 2,2′‐dihydroxy‐4‐methoxy‐benzophenone (BP‐8), in aqueous samples is described. The method involved the extraction of an aqueous sample using an Oasis HLB solid‐phase extraction (SPE) cartridge, followed by on‐line derivatization gas chromatography ‐ tandem mass spectrometry (GC‐MS/MS) with a trimethylsilylating (TMS) reagent. This eco‐friendly, injection‐port derivatization method, is sensitive, rapid, and provides reproducible results for these hydroxylated benzophenones in aqueous samples. The limits of quantitation (LOQs) were determined to be 1.0 to 2.5 ng/L for samples in 100 mL of water. The precision for these analytes, as indicated by relative standard deviations (RSDs), proved to be less than 11% for both intra‐ and inter‐day analysis. Accuracy, expressed as the mean extraction yield, was between 80 and 106%. The method was then applied to some environmental water samples, river water and samples of effluents from a wastewater treatment plant (WWTP), having the potential to contain BP‐3 and BP‐1.     

Preconcentration and analysis of Rhodamine B in water and red wine samples by using magnesium hydroxide/carbon nanotube composites as a solid‐phase extractant

A convenient and accurate analysis approach that combined solid‐phase extraction and high‐performance liquid chromatography was developed to determine the amount of Rhodamine B in red wine and Xiang‐jiang river water samples. A novel composite, magnesium hydroxide/carbon nanotube composites, was synthesized and used as the solid‐phase extractant for the preconcentration/analysis of Rhodamine B. Magnesium hydroxide/carbon nanotube composites, which combined the merits of carbon nanotubes and magnesium hydroxide, exhibited acceptable adsorption and desorption efficiencies for Rhodamine B. The linear range of the proposed solid‐phase extraction with high‐performance liquid chromatography method for Rhodamine B was 0.05–20.0 mg/L, with a limit of detection of 3.6 μg/L. The precision and reproducibility of the developed solid‐phase extraction with high‐performance liquid chromatography method and the batch‐to‐batch reproducibility of the solid‐phase extractant were also validated at spiking levels of 0.5 and 2.0 mg/L. The recovery of Rhodamine B was 94.33–106.7%, and the recovery relative standard deviations of the intra‐ and interday precisions were ≤ 3.83 and ≤ 6.01%, respectively. The relative standard deviation of the batch‐to‐batch reproducibility was ≤ 7.98%.     

基于聚酰胺6纳米纤维膜的固相萃取-高效液相色谱法测定兔血浆中酮康唑对映体

以基于聚酰胺6纳米纤维膜的固相萃取法,结合高效液相色谱手性流动相添加剂法测定了兔血浆中的酮康唑对映体的浓度。仅用1.5mg聚酰胺6纳米纤维膜、100μL甲醇即可完成目标物的富集和洗脱。酮康唑的2个对映体在50.0～400.0μg/L范围内呈良好的线性;方法的定量限为40.0μg/L;日内和日间精密度分别小于6.3%和8.6%;平均绝对回收率为79.4%～85.6%;平均相对回收率为90.0%～96.5%。本方法灵敏、准确、重现性好,符合生物样本中酮康唑对映体分析测定的要求。     

Determination of Diclofenac in Urine Samples by Molecularly‐Imprinted Solid‐Phase Extraction and Adsorptive Differential Pulse Voltammetry

A molecularly imprinted polymer for diclofenac (DCF) was prepared by thermal polymerization over silica beads using 2‐(dimethylamino)ethyl‐methacrylate as functional monomer. After silica elimination by HF treatment, the polymer was applied to the selective solid‐phase extraction of the drug from urine followed by its quantification by adsorptive differential pulse voltammetry. Results indicate that the drug could be selectively extracted from the sample and quantified at clinically relevant concentrations (μg/mL).     

高效液相色谱法测定辣椒粉中碱性橙、玫瑰精含量

建立了高效液相色谱法测定辣椒粉中的碱性橙、玫瑰精含量的测定方法.采用Agilent SB-C18分离柱,以甲醇 0.4 g/L十六烷基溴化铵的水溶液(70 30)为流动相,检测波长分别为410 nm和550 nm,同时测定碱性橙和玫瑰精.两组分的检出限分别为0.58 mg/L0、.72 mg/L,回收率为95.1%、94.2%,测定结果标准偏差2.06%、2.37%.     

Xylenol Orange‐Functionalized Halloysite Nanotubes as a Novel Adsorbent for Selective Solid‐phase Extraction and Determination of Trace Noble Elements

A novel method using xylenol orange‐modified halloysite nanotubes as a solid‐phase sorbent has been developed for the simultaneous preconcentration and separation of trace Au(III ) and Pd(II ) prior to their determination by inductively coupled plasma‐atomic emission spectrometry (ICP‐AES ). The experimental effects of pH , the amount of adsorbent, sample flow rate, sample volume, interfering ions, and the elution condition were investigated in detail. Au(III ) and Pd(II ) were retained on the column at pH 3, and eluted with 2.0 mL of 1.0 mol/L HCl + 2% CS (NH₂ )₂ solution. Common interfering ions did not have any impact on the adsorption, separation, and determination. An enrichment factor of 150 was obtained. The maximum adsorption capacities of the adsorbent were 41.63 and 47.82 mg/g for Au(III ) and Pd(II ), respectively, under the optimum conditions. By the definition of IUPAC , the detection limits (3σ ) of this method for Au(III ) and Pd(II ) were 0.31 and 0.27 ng/mL , and the relative standard deviations (RSDs ) were 2.7 and 3.2%, respectively (n = 8). This newly developed method was verified by certified reference materials, and has been successfully applied to the determination of trace Au(III ) and Pd(II ) in mine samples with satisfactory results. It can be confidently predicted that the method can be used for the determination trace Au(III ) and Pd(II ) in other real samples because of its high selectivity, sensitivity, and reproducibility.     

Analysis of Dichlorobenzene in Water by Solid‐Phase Microextraction

The solid‐phase microextraction (SPME) technique using a 100 μm film polydimethylsiloxane (PDMS) coated fiber has been examined with the aim to determine dichlorobenzene in aqueous samples. The feasibility of SPME‐GC‐ECD analysis has been evaluated. Absorption time of 30 min was selected and 1 min was long enough for complete desorption of the analytes in the injection port of the gas chromatograph. Linear ranges from 0.03 to 5 μg/L and method detection limits between 7 and 9 ng/L for dichlorobenzenes were obtained. The relative standard deviations were less than 12% for a spiking level of 3 μg/L. The proposed method was applied to determine dichlorobenzenes in spiked deionized water, ground water, and in industrial effluent samples.     

固相萃取反相高效液相色谱荧光检测法测定拟南芥中的生长素

建立了固相萃取反相高效液相色谱荧光检测法测定拟南芥中生长素的方法.采用Waters sunfire C18(150 mm×4.6mm,5μm)色谱柱,以乙腈-10 mmol/L乙酸钠(20∶ 80, V/V,乙酸调节至pH 3.5)为流动相,在流速1 mL/min,进样量20 μL,柱温20 ℃,样品温度10 ℃,荧光激发和发射波长分别为275和345 nm条件下,分离测定了拟南芥中的植物生长素吲哚乙酸和吲哚丙酸含量.分离效果良好,线性范围分别为85.71 pg～21.43 ng和0.33 ng～1.29μg,相关系数分别为0.9992和0.9999,相对标准偏差小于5%,平均回收率分别为103.8%和102.6%.本方法可对少量模式植物样品进行灵敏、准确的定量分析.     

超高效液相色谱-串联质谱法同时测定水产调味品中的罗丹明B、结晶紫和孔雀石绿

1引言罗丹明B常被违法用于调味品的染色,孔雀石绿和结晶紫因具有消毒和杀菌作用而常被违法应用于水产品养殖中。三者结构类似,都具有高毒、高残留和致癌、致畸、致突变等特点,色谱分离较难,且由于食品基质复杂,对质谱检测影响较大。目前,单独检测3种物质的方法分别有高效液相色谱法[1]、气相色谱-质谱法[2]、液相色谱-质谱法[3]和液相色谱-     

固相萃取-亲水相互作用液相色谱法同时测定环境水样中3种酰胺类化合物

基于亲水相互作用液相色谱(Hydrophilic Interaction Liquid Chromatography,HILIC)技术,建立了同时测定环境水样中丙烯酰胺、N,N-二甲基甲酰胺和N,N-二甲基乙酰胺的液相色谱分析方法.水样采用石墨化碳黑固相萃取柱净化,上样1.0 mL,并最终用1.0 mL乙腈洗脱,洗脱液进样色谱分析.选择Waters HILIC色谱柱,以乙腈/水作为流动相,等度洗脱,二极管阵列检测器200 nm条件下检测.在优化的分析条件下,3种酰胺类化合物在11 min内实现基线分离.所有目标化合物浓度在0.05～ 100 mg/L范围内线性良好,相关系数均大于0.9999;检出限达0.01 mg/L.加标回收率为84.1％～106％;相对标准偏差1.8％～10.4％.本方法具有简便快捷、灵敏准确等特点,能够满足环境水样中痕量酰胺类污染物检测的要求.     

在线固相萃取-高效液相色谱法测定水体中的多环芳烃

建立了在线固相萃取-液相色谱测定水体残留的多环芳烃的方法,用于测定自来水中的20种多环芳烃( PAHs)。直接进样1 mL经过过滤的水体样品,其中的被测组分富集在SPE柱( Acclaim PA II,50 mm×4.6 mm,3μm)上,在线完成净化和萃取富集;再通过阀切换将它们转移至分析流路,在Hypersil Green PAH色谱柱(150 mm ×3 mm,3μm)上分离检测。在线固相萃取流路以水和乙腈为流动相,0.4和0.6 mL/min流速梯度富集/萃取和洗脱;分析流路亦以水和乙腈为流动相,0.8 mL/min流速梯度洗脱,采用紫外254 nm检测无荧光效应的苊烯和弱荧光效应的萘,其它的多环芳烃化合物则于不同的荧光检测通道里,在其对应的最大激发/发射波长下灵敏测定。整个分析流程32 min即可完成。20种PAHs的保留时间的相对标准偏差均小于0.2％,色谱峰面积的相对标准偏差均小于1.3％(n=7);在3个浓度数量级范围内峰面积与进样质量浓度的线性相关系数均大于0.9910,0.05μg/L的自来水加标样品的回收率为57％~140％,5μg/L的自来水加标样品的回收率为85％~116％;多数有荧光响应的PAHs的方法检出限均小于0.02μg/L (S/N=3)。     

花生壳活性炭固相萃取/超高效液相色谱法测定河水中的18种多环芳烃

建立了固相萃取/超高效液相色谱-二极管阵列检测(SPE/UPLC-PDA)联用技术测定河水中18种痕量多环芳烃(PAHs)的快速分析方法。通过优化固相萃取条件、流动相体系、色谱条件等因素,7 min内实现了18种多环芳烃的高效分离。在0.05~50 mg/L浓度范围内,18种多环芳烃的浓度与对应峰面积呈良好线性关系,相关系数为0.999 1~0.999 9,检出限为0.08~2.03 ng/L,样品加标回收率为74.5%~103.6%,相对标准偏差(RSD,n=6)为0.5%~2.3%。将该方法应用于九龙江流域龙岩段周边水样的检测,结果可靠。该方法简单环保、灵敏准确、操作快速,可显著提高河水中痕量PAHs的分析效率。     

Surface Polymers on Multiwalled Carbon Nanotubes for Selective Extraction and Electrochemical Determination of Rhodamine B in Food Samples

In this study, we combine magnetic solid phase extraction (MSPE), with the screen-printed carbon electrode (SPCE) modified by a molecular imprinted polymer (MIP) for sensitive and selective extraction and electrochemical determination of Rhodamine B in food samples. A magnetic solid phase extraction (MSPE) was carried out using magnetic poly(styrene-co-divinylbenzene) (PS-DVB) and magnetic nanoparticles (MNPs) synthetized on the surface of multiwalled carbon nanotubes (MWCNTs). An MIP was prepared on the surface of MWCNTs in the presence of titanium oxide nanoparticles (TiO₂NPs) modifying the SPCE for the rapid electrochemical detection of Rhodamine B. The MIPs synthesis was optimized by varying the activated titanium oxide (TiO₂) and multiwalled carbon nanotubes (MWCNTs) amounts. The MSPE and electrochemical detection conditions were optimized as well. The present method exhibited good selectivity, high sensitivity, and good reproducibility towards the determination of Rhodamine B, making it a suitable method for the determination of Rhodamine B in food samples.     

Determination of Acrolein‐Derived 3‐Hydroxypropylmercapturic Acid in Human Urine Using Solid‐phase Extraction Combined with Molecularly Imprinted Mesoporous Silica and LC‐MS/MS Detection

A novel method for the analysis of (3‐hydroxypropyl)mercapturic acid (HPMA), a major acrolein metabolite in human urine incorporating a molecularly imprinted solid‐phase extraction (MISPE) process using N‐acetylcysteine ‐imprinted mesoporous silica particles coupled with LC‐MS/MS detection was developed. The molecularly imprinted mesoporous silica particles were synthesized based on the supported material of ordered mesoporous silica SBA‐15 with N‐acetylcysteine (NAC) as template using surface molecular imprinting technology. The condition of MISPE procedures was optimized. The use of MISPE improved the accuracy and precision of the LC‐MS method and lowered the limit of detection (0.23 ng/mL). The recoveries at three spiked levels ranged between 88.5% to 108.6%. The developed MISPE method enabled the selective extraction of HPMA successfully in human urine and could be used as an effective approach for the determination of ultra‐trace HPMA in complex biological matrices. The results in real samples showed that median levels of HPMA were significantly higher (1922.0 ng/mg of creatinine, N = 75) in smokers than in nonsmokers (759.1 ng/mg of creatinine, N = 5), demonstrating the higher acrolein uptake in smokers than in nonsmokers.     

Determination of Estrogenic Nonylphenol and Bisphenol a in River Water by Solid‐Phase Extraction and Gas Chromatography‐Mass Spectrometry

A simple and sensitive method is presented for the analysis of nonylphenol (NP) and bisphenol A (BPA), two well known hormonally active agents (HAAs), in the samples of river water. The method involves extraction of the sample by a graphitized carbon black (GCB) solid‐phase extraction, and determination by an ion‐trap gas chromatography‐mass spectrometry (GC‐MS). The large‐volume injection technique provides high precision and sensitivity for NP and BPA, to quantitation at < 0.05 μg/L in 200 mL of water samples. Recovery of NP and BPA in spiked water samples ranged from 80% to 85%. Relative standard deviations (RSD) of replicate analyses ranged from 1.6% to 6.9%. The concentrations of NP in rivers were in the range between 0.4 to 2.4 μg/L, which were below the threshold concentration (10 μg/L) for vitellogenin induction in fish, but 78%) of water samples from five rivers exceeded the predicted‐no‐effect concentration (PNEC) of 0.7 μg/L as proposed recently. The concentrations of BPA ranged from < 0.05 μg/L to 3.0 μg/L, which all were below the PNEC of 64 μg/L.     

罗丹明6G荧光猝灭法测定农产品中痕量铁

在稀硫酸溶液中,铁(Ⅲ)与碘化钾反应生成游离碘(以络阴离I-,3 状态存在).所释出的I-,3与罗丹明6G反应生成离子缔合络合物,导致罗丹明 6G 的荧光猝灭.在激发波长 483 nm 及发射波长 551 nm 处测定空白试液及含铁试样溶液的荧光强度F,o及F,s并算得荧光猝灭强度△F.试验结果表明:铁(Ⅲ)的质量浓度在 0.01～0.40 mg·L-1范围内与其相应的荧光猝灭值△F 之问呈线性关系,并测得其检出限(S/N=3)为 0.005 mg·L-1.应用此方法测定了3种农产品试样中的含铁量,并以此试样为基体加入铁(Ⅲ)标准溶液测定了方法的回收率在 95.7%～99.3%之间.