Metallomacrocycles with a Difference: Macrocyclic Complexes with Exocyclic Ruthenium(II)‐Containing Domains

The templated synthesis of organic macrocycles containing rings of up to 96 atoms and three 2,2′‐bipyridine (bpy) units is described. Starting with the bpy‐centred ligands 5,5′‐bis[3‐(1,4‐dioxahept‐6‐enylphenyl)]‐2,2′‐bipyridine and 5,5′‐bis[3‐(1,4,7‐trioxadec‐9‐enylphenyl)]‐2,2′‐bipyridine, we have applied Grubbs’ methodology to couple the terminal alkene units of the coordinated ligands in [FeL₃]²⁺ complexes. Hydrogenation and demetallation of the iron(II)‐containing macrocyclic complexes results in the isolation of large organic macrocycles. The latter bind {Ru(bpy)₂} units to give macrocyclic complexes with exocyclic ruthenium(II)‐containing domains. The complex [Ru(bpy)₂(L)]²⁺ (isolated as the hexafluorophosphate salt), in which L=5,5′‐bis[3‐(1,4,7,10‐tetraoxatridec‐12‐enylphenyl)]‐2,2′‐bipyridine, undergoes intramolecular ring‐closing metathesis to yield a macrocycle which retains the exocyclic {Ru(bpy)₂} unit. The poly(ethyleneoxy) domains in the latter macrocycle readily scavenge sodium ions, as proven by single‐crystal X‐ray diffraction and atomic absorption spectroscopy data for the bulk sample. In addition to the new compounds, a series of model complexes have been fully characterized, and representative single‐crystal X‐ray structural data are presented for iron(II) and ruthenium(II) acyclic and macrocyclic species.     

The synthesis and characterization of single substitute melamine cored Schiff bases and their [Fe(III) and Cr(III)] complexes

In this study, firstly, two single substitute novel ligands have been synthesized by reacting melamine with 3,4,-dihydroxybenzaldeyhde or 4-carboxybenzaldehyde. Then, eight new mono nuclear single substitute [Salen/Salophen Fe(III) and Cr(III)] complexes have been synthesized by reacting the ligands [2-(3,4-dihydroxybenzimino)-4,6-diamimo-1,3,5-triazine and 2-(4-carboxybenzimino)-4,6-diamimo-1,3,5-triazine)] with tetradentate Schiff bases N,N′-bis(salicylidene)ethylenediamine-(salenH₂) or bis(salicylidene)-o-phenylenediamine-(salophen H₂). And then, all ligands and complexes have been characterized by means of elementel analysis, FT-IR spectroscopy, ¹H NMR, LC–MS, thermal analyses and magnetic suscebtibility measurements. Finally, metal ratios of the prepared complexes were determined using AAS. The complexes have also been characterized as disorted octahedral low-spin Fe(III) and Cr(III) bridged by catechol and COO^? groups.     

Liquid-liquid extraction of iron(III) and gallium(III) with macrocyclic Schiff bases containing bisphenol A subunits

The quantitative extraction of iron(III) and gallium(III) was investigated with the recently synthesized macrocyclic Schiff base containing bisphenol A subunits. The phenol groups in the Schiff base moiety led to a large increase in the percent extraction of trivalent metal ions. The substitution of methoxy groups for phenolic OH ligands resulted in a marked decrease in the extractability of metal ions, and no iron(III) was extracted. The corresponding acyclic Schiff base was found to have a reasonable reactivity toward metal ions and a better solubility in organic solvents. The iron(III) and gallium(III) complexes with macrocyclic and acyclic Schiff bases were quantitatively extracted into nitrobenzene without the presence of bulky counter anions. A single extraction gave a good separation of iron(III) from iron(II) in the mole ratios 4:1 to 1:3. The red iron(III) complexes can be used for the extraction-spectrophotometric determination of iron(III). The apparent molar absorptivity at 518 nm is 5.43 × 10³lmol⁻¹ cm⁻¹.     

1,ω‐Bis(4‐amino‐1,2,4‐triazole‐5(1H)‐thion‐3‐ylsulfanyl)alkanes: Versatile precursors for novel bis(S‐triazolo[3,4‐b][1,3,4]thiadiazines) as well as novel bis(macrocyclic schiff bases)

Two synthetic routes were attempted for the synthesis of the novel bis(5,6‐dihydro‐S‐triazolo[3,4‐b]thiadiazines) 12a,b and 14 . In the first route the bis(aminotriazoles) 4a,b were reacted with the appropriate α‐haloketones or α‐haloesters to give the corresponding bis(S‐triazolo[3,4‐b]thiadiazines) 11a‐d followed by reduction with NaBH₄. In the second route, the bis(Schiff bases) 13d were reacted with the appropriate α‐haloesters in refluxing DMF containing TEA to give the target compound 14 . Cyclocondensation of 4a,b with the appropriate bis(carbonyl) ethers 15a,b in refluxing acetic acid under high dilution conditions afforded the corresponding macrocyclic Schiff bases 16a‐c . The latter underwent alkylation with the appropriate halo compounds to give the corresponding alkylated derivatives 17a‐d .     

Chirale Halbsandwich‐Pentamethylcyclopentadienyl‐Rhodium(III)‐ und Iridium(III)‐Komplexe mit Schiff‐Basen aus Salicylaldehyd und α‐Aminosäureestern [1]

Chiral Half‐sandwich Pentamethylcyclopentadienyl Rhodium(III) and Iridium(III) Complexes with Schiff Bases from Salicylaldehyde and α‐Amino Acid Esters [1] A series of diastereoisomeric half‐sandwich complexes with Schiff bases from salicylaldehyde and L‐α‐amino acid esters including chiral metal atoms, [(η⁵‐C₅H₅)(Cl)M(N,O‐Schiff base)], has been obtained from chloro bridged complexes [(η⁵‐C₅Me₅)(Cl)M(μ‐Cl)]₂ (M = Rh, Ir). Abstraction of chloride from these complexes with Ag[BF₄] or Ag[SO₃CF₃] affords the highly sensitive compounds [(η⁵‐C₅Me₅)M(N,O‐Schiff base]⁺X^? (M = Rh, Ir; X = BF₄, CF₃SO₃) to which PPh₃ can be added under formation of [(η⁵‐C₅Me₅)M(PPh₃)(N,O‐Schiff base)]⁺X^?. The diastereoisomeric ratio of the complexes ( 1 ‐ 7 and 11 ‐ 12 ) has been determined from NMR spectra.     

A novel three‐dimensional zinc(II) coordination polymer based on 3,3′‐{[1,3‐phenylenebis(methylene)]bis(oxy)}dibenzoic acid and 1,4‐bis(pyridin‐4‐yl)benzene: synthesis,crystal structure and photocatalytic properties

A novel three‐dimensional (3D) Zn^II coordination polymer, namely, poly[[[1,4‐bis(pyridin‐4‐yl)benzene](μ₃‐3,3′‐{[1,3‐phenylenebis(methylene)]bis(oxy)}dibenzoato)zinc(II)] 1,4‐bis(pyridin‐4‐yl)benzene], {[Zn(C₂₂H₁₆O₆)(C₁₆H₁₂N₂)]·C₁₆H₁₂N₂}_n or {[Zn(PMBD)(DPB)]·DPB}_n, 1 , where H₂PMBD is 3,3′‐{[1,3‐phenylenebis(methylene)]bis(oxy)}dibenzoic acid and DPB is 1,4‐bis(pyridin‐4‐yl)benzene, has been synthesized by self‐assembly using zinc nitrate, a semi‐rigid dicarboxylic acid and a nitrogen‐containing ligand. The single‐crystal X‐ray structure determination indicates that 1 possesses an intriguing 3D architecture with a 4‐connected uninodal cds topology, which is constructed from dinuclear {Zn₂} clusters and V‐shaped PMBD^2? linkers. Compound 1 exhibits excellent photocatalytic activity on the degradation of the organic dyes Rhodamine B (RhB), Rhodamine 6G (Rh6G) and Methyl Red (MR).     

Allylic Peroxidations with Bis(2‐pyridylimino)isoindolato‐Cobalt and ‐Iron Complexes

Several novel substituted bis(2‐pyridylimino)isoindolato (BPI) cobalt(II) and iron(II) complexes [M(BPI)(OAc)(H₂O)] (M = Co: 1 ‐ 6, Fe: 7) have been synthesized by reaction of bis(2‐pyridylimino)isoindole derivatives with the corresponding metal(II) acetates. Reaction of 1‐6 with 1.5 ‐ 2 molar equivalents of t‐BuOOH gave the corresponding alkylperoxocobalt(III) complexes [Co(BPI)(OAc)(OOtBu)] (10 ‐ 15). Using an aqueous solution of t‐BuOOH (70 %), cyclohexene was selectively catalytically oxidized to the dialkylperoxide cyclohex‐2‐ene‐1‐t‐butylperoxide.     

Reactivity of tert‐butylperoxyl radical with manganese(III), cobalt(II), and nickel(II) salicylidene Schiff base chelates

Salicylidene Schiff base chelates (R,R)‐(–)‐N,N′‐bis(3,5‐di‐tert‐butylsalicylidene)‐1,2‐cyclohexanediaminomanganese(III) chloride, (R,R)‐(–)‐N,N′‐bis(3,5‐di‐tert‐butylsalicylidene)‐1,2‐cyclohexanediaminocobalt(II), N,N′‐bis(salicylidene)‐ethylenediaminocobalt(II), N,N′‐bis(salicylidene)ethylenediaminonickel(II), and N,N′‐bis(salicylidene)ethylenediaminoaquacobalt(II), as well as (R,R)‐(–)‐N,N′‐bis(3,5‐di‐tert‐butylsalicylidene)1,2‐cyclohexanediamine, were kinetically examined as antioxidants in the scavenging of tert‐butylperoxyl radical (tert‐butylOO^?). Absolute rate constants and corresponding Arrhenius parameters were determined for reactions of tert‐butylOO^? with these chelates in the temperature range ?52.5 to ?11°C. High reactivity of tert‐butylOO^? with Mn(III) and Co(II) salicylidene Schiff base chelates was established using a kinetic electron paramagnetic resonance method. These salicylidene Schiff base chelates react in a 1:1 stoichiometric fashion with tert‐butylOO^? without free radical formation. Ultraviolet–visible spectrophotometry and differential pulse voltammetry established that the rapid removal rate of tert‐butylOO^? by these chelates is the result of Mn(III) oxidation to Mn(IV) and Co(II) oxidation to Co(III) by tert‐butylOO^?. It is concluded that removal of alkylperoxyl radical by Mn(III) and Co(II) salicylidene Schiff base chelates may partially account for their biological activities. © 2007 Wiley Periodicals, Inc. Int J Chem Kinet 39: 431–439, 2007     

Manganese(III) acetate‐catalyzed synthesis of polyguaiacol

Polyguaiacol was synthesized in the mixtures of water and various organic solvents using manganese(III) acetate as a new catalyst for radical polymerization and a biomimetic model for manganese peroxidase. Aqueous solutions of 30–70% (v/v) acetonitrile, 1,4‐dioxane, and methanol were used as model solvent mixtures. The polymer yield in the methanol (<30%) solution was lower than that in the acetonitrile or 1,4‐dioxane solution (60–90%). The average molecular weight of the polymer was also lowest in the methanol solution. Difference UV absorption spectroscopy analysis revealed that nonhydrated guaiacol clusters were found to be dominant in acetonitrile and 1,4‐dioxane solutions, especially when the content of 1,4‐dioxane was 50% (v/v) or higher. In the methanol solution, only the hydrated guaiacol clusters were observed. From the comparison of ¹H NMR data for polyguaiacol and products of guaiacol oxidation by manganese(III) acetate, 3‐(4‐hydroxy‐3‐methoxy‐phenyl)‐5,3′‐dimethoxy‐4,4′‐biphenol and a mixture of 5‐(4‐hydroxy‐3‐methoxyphenyl)‐3,3′‐dimethoxy‐4,4′‐biphenoquinone and 3‐(4‐hydroxy‐3‐methoxyphenyl)‐5,3′‐dimethoxy‐4,4′‐biphenoquinone were found to be the major structural units of polyguaiacol. Water molecule is not involved in the formation of these compounds. Therefore, the polymerization should take place readily not in methanol but in acetonitrile and 1,4‐dioxane solutions. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6009–6015, 2008     

Syntheses,Structures, and Magnetic Properties of Two Cobalt(II) Metal‐Organic Frameworks Based on Y‐shaped 3,5,4′‐Azobenzenetricarboxylic Acid and Different N‐donor Ligands

Two metal‐organic frameworks, [Co₂(ABTC)(bimh)(OH)] · 2H₂O ( 1 ) and [Co₃(ABTC)₂(dimb)₄]_n ( 2 ) [H₃ABTC = 3,4′,5‐azobenzenetricarboxylic acid, bimh = 1,1′‐(1,4‐hexanediy)bis(imidazole), dimb = 1,4‐bis(1H‐imidazol‐1‐yl)benzene], were prepared under solvothermal conditions and structurally characterized. Complex 1 demonstrates a complicated 3D (3,8)‐connected tfz‐d net with (4³)₂(4⁶.6¹⁷.8⁵) topology. The framework of 2 can be classified as a rare 3D (3,6,6)‐connected net with the Schäfli symbol of (4.6²)₂(4².6¹⁰.8³)(4⁴.6¹⁰.8), and exhibits an intriguing self‐penetrating motif. Meanwhile, the thermal stabilities and magnetic properties for 1 and 2 were also probed.     

Polymer Supported Schiff Base Complexes of Iron(III), Cobalt(II) and Nickel(II) Ions and their Catalytic Activity in Oxidation of Phenol and Cyclohexene

The polymer supported transition metal complexes of N,N′‐bis (o‐hydroxy acetophenone) hydrazine (HPHZ) Schiff base were prepared by immobilization of N,N′‐bis(4‐amino‐o‐hydroxyacetophenone)hydrazine (AHPHZ) Schiff base on chloromethylated polystyrene beads of a constant degree of crosslinking and then loading iron(III), cobalt(II) and nickel(II) ions in methanol. The complexation of polymer anchored HPHZ Schiff base with iron(III), cobalt(II) and nickel(II) ions was 83.30%, 84.20% and 87.80%, respectively, whereas with unsupported HPHZ Schiff base, the complexation of these metal ions was 80.3%, 79.90% and 85.63%. The unsupported and polymer supported metal complexes were characterized for their structures using I.R, UV and elemental analysis. The iron(III) complexes of HPHZ Schiff base were octahedral in geometry, whereas cobalt(II) and nickel(II) complexes showed square planar structures as supported by UV and magnetic measurements. The thermogravimetric analysis (TGA) of HPHZ Schiff base and its metal complexes was used to analyze the variation in thermal stability of HPHZ Schiff base on complexation with metal ions. The HPHZ Schiff base showed a weight loss of 58% at 500°C, but its iron(III), cobalt(II) and nickel(II) ions complexes have shown a weight loss of 30%, 52% and 45% at same temperature. The catalytic activity of metal complexes was tested by studying the oxidation of phenol and epoxidation of cyclohexene in presence of hydrogen peroxide as an oxidant. The supported HPHZ Schiff base complexes of iron(III) ions showed 64.0% conversion for phenol and 81.3% conversion for cyclohexene at a molar ratio of 1∶1∶1 of substrate to catalyst and hydrogen peroxide, but unsupported complexes of iron(III) ions showed 55.5% conversion for phenol and 66.4% conversion for cyclohexene at 1∶1∶1 molar ratio of substrate to catalyst and hydrogen peroxide. The product selectivity for catechol (CTL) and epoxy cyclohexane (ECH) was 90.5% and 96.5% with supported HPHZ Schiff base complexes of iron(III) ions, but was found to be low with cobalt(II) and nickel(II) ions complexes of Schiff base. The selectivity for catechol (CTL) and epoxy cyclohexane (ECH) was different with studied metal ions and varied with molar ratio of metal ions in the reaction mixture. The selectivity was constant on varying the molar ratio of hydrogen peroxide and substrate. The energy of activation for epoxidation of cyclohexene and phenol conversion in presence of polymer supported HPHZ Schiff base complexes of iron(III) ions was 8.9 kJ mol^?1 and 22.8 kJ mol^?1, respectively, but was high with Schiff base complexes of cobalt(II) and nickel(II) ions and with unsupported Schiff base complexes.     

Metal Complexes of New Mixed Oxaaza‐Macrocyclic Ligands. X‐Ray Crystal Structure of L1, L2, [SrL2(H2O)2](ClO4)2 and [BaL2(NCS)2(CH3CN)]·CH3CN

A new mixed oxaaza‐macrocyclic ligand, L¹, has been obtained by direct synthesis between 1,4‐bis‐(2′‐formylphenyl)‐1,4‐dioxabutane and the diamine 2,2′‐ethylenedioxydiethylamine. The dialkylated ligand L², bearing two nitrobenzyl pendant groups, has been prepared and transitional, post‐transitional and Ca²⁺, Sr²⁺, and Ba²⁺ metal complexes have been synthesized in order to elucidate the coordination preferences. The crystal structures of the ligands L¹ and L² and the complexes [SrL²(H₂O)₂](ClO₄)₂ and [BaL²(NCS)₂(CH₃CN)]·CH₃CN have been determined by single crystal X‐ray diffraction. The structures reveal the presence of mononuclear endomacrocyclic complexes where the pendant arms radiate away from the ligand.     

The Synthesis and Characterization of s‐Triazine‐Cored Tripodal Structure and Its Salen/Salophen‐Bridged Fe/Cr(III) Capped Complexes

A novel Schiff base compound was synthesized, and its complexation properties with Fe(III) and Cr(III) were investigated. Tripodal ligand was synthesized by the reaction of s‐triazine and 4‐hydroxybenzaldehyde. Then a Schiff base involving 8‐hydroxyquinoline was synthesized by the reaction of 5‐aminomethyl‐8‐hydroxyquinoline ( QN ) and 2,4,6‐tris(p‐formylphenoxy)‐1,3,5‐triazine ( TRIPOD ) in methanol/chloroform media. The obtained Schiff base ( QN-TRIPOD ) was then reacted with four trinuclear Fe(III) and Cr(III) complexes including tetradentate Schiff bases N ,N ′‐bis(salicylidene)ethylenediamine (salenH₂)/bis(salicylidene)‐o‐phenylenediamine (SalophenH₂). The synthesized ligand and complexes were characterized by means of elemental analysis carrying out ¹H NMR, FTIR spectroscopy, thermal analyses, and magnetic susceptibility measurements. Finally, metal ratios of the prepared complexes were determined by using atomic adsorption spectrometry.     

The novel triazine cored tripodal and trinuclear Schiff base‐oxime metal complexes: Their magnetic properties and thermal decompositions

2,4,6‐tris(4‐hydroxybenzimino)‐1,3,5‐triazine [ 1 , 2 ] ( III ) have been synthesized by the reaction of 1 equiv melamine and three equiv 4‐hydroxybenzaldehyde, and characterized by means of elemental analysis, ¹H‐NMR (nuclear magnetic resonance spectroscopy), Fourier transform infrared (FTIR) spectrscopy, liquid chromatography‐mass spectroscopy (LC‐MS). L ( IV ) has been synthesized by the reaction of one equiv ( III ) and three equiv 4‐(thiophenoxy)phenyloxylohydroxymoyl chloride ( II ) , and characterized by means of the same methods. Then, four novel trinuclear Fe(III) and Cr(III) complexes involving tetradentate Schiff bases N,N′‐bis(salicylidene)ethylenediamine‐(salenH₂) or bis(salicylidene)‐o‐phenylenediamine‐(salophen H₂) with L (IV) have been synthesized and characterized by means of elemental analysis, FTIR spectrscopy, LC‐MS, thermal analyses. The metal ratios of the prepared complexes have been determined using AAS. The aim of the present study is synthesis of novel tridirectional‐trinuclear systems and to present their effects on magnetic behavior of [salenFe(III)], [salophenFe(III)], [salenCr(III)], and [salophenCr(III)] capped complexes. The complexes have also been characterized as low‐spin distorted octahedral Fe(III) and Cr(III) bridged by keton‐oxime group. J. Heterocyclic Chem., (2011).     

A New Chiral Binaphthalene‐Based Fluorescence Polymer Sensor for the Highly Enantioselective Recognition of Phenylalaninol

A new (S)‐binaphthalene‐based polymer ( P ‐ 1 ) was synthesized by the polymerization of 5,5′‐((2,5‐dibutoxy‐1,4‐phenylene)bis(ethyne‐2,1‐diyl))bis(2‐hydroxy‐3‐(piperidin‐1‐ylmethyl) benzaldehyde ( M ‐ 1 ) with (S)‐2,2′‐dimethoxy‐(1,1′‐binaphthalene)‐3,3′‐diamine ( M ‐ 2 ) through the formation of a Schiff base; the corresponding chiral polymer ( P ‐ 2 ) could be obtained by the reduction of polymer P ‐ 1 with NaBH₄. Chiral polymer P ‐ 1 exhibited a remarkable “turn‐on” fluorescence‐enhancement response towards (D )‐phenylalaninol and excellent enantioselective recognition behavior with enantiomeric fluorescence difference ratios (ef) as high as 8.99. More importantly, chiral polymer P ‐ 1 displays a bright blue fluorescence color change upon the addition of (D )‐phenylalaninol under a commercially available UV lamp, which can be clearly observed by the naked eye. On the contrary, chiral polymer P ‐ 2 showed weaker enantioselective fluorescence ability towards the enantiomers of phenylalaninol.     

Synthesis of polyesters by the polyaddition of bis(oxetane)s with active di(ester)s

The polyaddition of bis(oxetane)s 1,4‐bis[(3‐ethyl‐3‐oxetanylmethoxymethyl)]benzene (BEOB), 4,4′‐bis[(3‐ethyl‐3‐oxetanyl)methoxy]benzene (4,4′‐BEOBP), 1,4‐bis[(3‐ethy‐3‐oxetanyl)methoxy] ‐benzene (1,4‐BEOMB), 1,2‐bis[(3‐ethyl‐3‐oxetanyl)methoxy]benzene (1,2‐BEOMB), 4,4‐bis[(3‐ethyl‐3‐oxetanyl)methoxy]biphenyl (4,4′‐BEOMB), 3,3′,5,5′‐tetramethyl‐[4,4′‐bis(3‐ethyl‐3‐oxetanyl)methoxy]biphenyl (TM‐BEOBP) with active diesters di‐s‐phenylthioterephthalate (PTTP), di‐s‐phenylthioisoterephthalate (PTIP), 4,4′‐di(p‐nitrophenyl)terephthalate (NPTP), 4,4′‐di(p‐nitrophenyl)isoterephthalate (NPIP) were carried out in the presence of tetraphenylphosphonium chloride (TPPC) as a catalyst in NMP for 24 h, affording corresponding polyesters with M_n's in the range 2200–18,200 in 41–98% yields. The obtained polymers would soluble in common organic solvents and had high thermal stabilities. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1528–1536, 2004     

Double complexes [Co(NH3)5(H2O)]2[Zr3F18]·6H2O and [Co(NH3)6]2[Zr3F18]·6H2O

The structures of orthorhombic bis[pentaammineaquacobalt(III)] tetra‐μ₂‐fluorido‐tetradecafluoridotrizirconium(IV) hexahydrate (space group Ibam), [Co(NH₃)₅(H₂O)]₂[Zr₃F₁₈]·6H₂O, (I), and bis[hexaamminecobalt(III)] tetra‐μ₂‐fluorido‐tetradecafluoridotrizirconium(IV) hexahydrate (space group Pnna), [Co(NH₃)₆]₂[Zr₃F₁₈]·6H₂O, (II), consist of complex [Co(NH₃)_x(H₂O)_y]³⁺ cations with either m [in (I)] or and 2 [in (II)] symmetry, [Zr₃F₁₈]⁶⁻ anionic chains located on sites with 222 [in (I)] or 2 [in (II)] symmetry, and water molecules.     

Metal‐Ion Sensing Europium(III) Complexes with Bidentate Phosphine Oxide Ligands Containing a 2,2′‐Bipyridine Framework

Novel Eu^III complexes with bidentate phosphine oxide ligands containing a bipyridine framework, i.e., [3,3′‐bis(diphenylphosphoryl)‐2,2′‐bipyridine]tris(hexafluoroacetylacetonato)europium(III) ([Eu(hfa)₃(BIPYPO)]) and [3,3′‐bis(diphenylphosphoryl)‐6,6′‐dimethyl‐2,2′‐bipyridine]tris(hexafluoroacetylacetonato)europium(III) ([Eu(hfa)₃(Me‐BIPYPO)]), were synthesized for lanthanide‐based sensor materials having high emission quantum yields and effective chemosensing properties. The emission quantum yields of [Eu(hfa)₃(BIPYPO)] and [Eu(hfa)₃(Me‐BIPYPO)] were 71 and 73%, respectively. Metal‐ion sensing properties of the Eu^III complexes were also studied by measuring the emission spectra of Eu^III complexes in the presence of Zn^II or Cu^II ions. The metal‐ion sensing and the photophysical properties of luminescent Eu^III complexes with a bidentate phosphine oxide containing 2,2′‐bipyridine framework are demonstrated for the first time.     

New Cu(I) Coordination Complexes Based on Tetrathiafulvalene Substituted Triazol‐pyridine Ligand: Synthesis,Properties and Theoretical Studies

Two Cu(I) complexes based on the thioethyl‐bridged triazol‐pyridine ligand with tetrathiafulvalene unit (TTF‐TzPy, L ), [Cu(I)(Binap)(L)]BF₄ ( 5 , Binap=2,2’‐bis(diphenylphosphino)‐1,1’‐binaphthyl) and [Cu(I)(Xantphos)(L)]BF₄ ( 6 , Xantphos=9,9‐dimethyl‐4,5‐bis(diphenylphosphino)‐xanthene), have been synthesized. All new compounds are characterized by elemental analyses, ¹H NMR and mass spectroscopies. The complex 5 has been determined by X‐ray structure analyses which shows that the central copper (I) ion assumes distorted tetrahedral geometry. The photophysical, computational and electrochemical properties of L and 5 ‐ 6 have been investigated. The most representative molecular orbital energy‐level diagrams and the spin‐allowed singlet? singlet electronic transitions of the three compounds have been calculated with density functional theory (DFT) and time‐dependent DFT (TD‐DFT). The luminescence bands of Cu(I) complexes 5 ‐ 6 have been assigned as mixed intraligand and metal‐to‐ligand charge transfer ³(MLCT+π→π^*) transitions through analysis of the photophysical properties and DFT calculations. The electrochemical studies reveal that 5 ‐ 6 undergo reversible TTF/TTF^+?/TTF²⁺ redox processes and one irreversible Cu⁺→Cu²⁺ oxidation process.     

Coordination polymers and hydrogen‐bonded assemblies of 2,2′‐[2,5‐bis(carboxymethoxy)‐1,4‐phenylene]diacetic acid with ammonium,lanthanum and zinc cations

We report the synthesis of the 2,2′‐[2,5‐bis(carboxymethoxy)‐1,4‐phenylene]diacetic acid (TALH₄) ligand and the structures of its adducts with ammonium, namely diammonium 2,2′‐[2,5‐bis(carboxymethyl)‐1,4‐phenylenedioxy]diacetate, 2NH₄⁺·C₁₄H₁₂O₁₀²⁻, (I), lanthanum, namely poly[[aquabis[μ₄‐2,2′‐(2‐carboxylatomethyl‐5‐carboxymethyl‐1,4‐phenylenedioxy)diacetato]dilanthanum(III)] monohydrate], {[La₂(C₁₄H₁₁O₁₀)₂(H₂O)]·H₂O}_n, (II), and zinc cations, namely poly[[{μ₄‐2,2′‐[2,5‐bis(carboxymethyl)‐1,4‐phenylenedioxy]diacetato}zinc(II)] trihydrate], {[Zn(C₁₄H₁₂O₁₀)]·3H₂O}_n, (III), and poly[[diaqua(μ₂‐4,4′‐bipyridyl){μ₄‐2,2′‐[2,5‐bis(carboxymethyl)‐1,4‐phenylenedioxy]diacetato}dizinc(II)] dihydrate], {[Zn₂(C₁₄H₁₀O₁₀)(C₁₀H₈N₂)(H₂O)₂]·2H₂O}_n, (IV), the formation of all four being associated with deprotonation of TALH₄. Adduct (I) is a diammonium salt of TALH₂²⁻, with the ions located on centres of crystallographic inversion. Its crystal structure reveals a three‐dimensional hydrogen‐bonded assembly of the component species. Reaction of TALH₄ with lanthanum trinitrate hexahydrate yielded a two‐dimensional double‐layer coordination polymer, (II), in which the La^III cations are nine‐coordinate. With zinc dinitrate hexahydrate, TALH₄ forms 1:1 two‐dimensional coordination polymers, in which every Zn^II cation is linked to four neighbouring TALH₂²⁻ anions and each unit of the organic ligand is coordinated to four different tetrahedral Zn^II cation connectors. The crystal structure of this compound accommodates molecules of disordered water at the interface between adjacent polymeric layers to give (III), and it has been determined with low precision. Another polymer assembly, (IV), was obtained when zinc dinitrate hexahydrate was reacted with TALH₄ in the presence of an additional 4,4′‐bipyridyl ligand. In the crystal structure of (IV), the bipyridyl and TAL⁴⁻ entities are located on two different inversion centres. The ternary coordination polymers form layered arrays with corrugated surfaces, with the Zn^II cation connectors revealing a tetrahedral coordination environment. The two‐dimensional polymers in (II)–(IV) are interconnected with each other by hydrogen bonds involving the metal‐coordinated and noncoordinated molecules of water. TALH₄ is doubly deprotonated, TALH₂²⁻, in (I) and (III), triply deprotonated, viz. TALH³⁻, in (II), and quadruply deprotonated, viz. TAL⁴⁻, in (IV). This report provides the first structural characterization of TALH₄ (in deprotonated form) and its various supramolecular adducts. It also confirms the potential utility of this tetraacid ligand in the formulation of coordination polymers with metal cations.