Natural convection flow of a couple stress fluid between two vertical parallel plates with Hall and ion-slip effects

The Hall and ion-slip effects on fully developed electrically conducting couple stress fluid flow between vertical parallel plates in the presence of a temperature dependent heat source are investigated. The governing non-linear partial differential equations are transformed into a system of ordinary differential equations using similarity transformations. The resulting equations are then solved using the homotopy analysis method (HAM). The effects of the magnetic parameter, Hall parameter, ion-slip parameter and couple stress fluid parameter on velocity and temperature are discussed and shown graphically.     

Computational modeling of an MHD flow of a non-Newtonian fluid over an unsteady stretching sheet with viscous dissipation effects

An investigation has been conducted on the MHD Casson fluid and heat transfer over an unsteady stretching sheet with viscous dissipation effects. With suitable dimensionless variables, partial differential equations are reduced to ordinary differential equations, which are then solved by the homotopy analysis method. Dependences of flow characteristics on various parameters involved into the equations are obtained.     

Three-dimensional flow of a magnetohydrodynamic Casson fluid over an unsteady stretching sheet embedded into a porous medium

A three-dimensional flow of a magnetohydrodynamic Casson fluid over an unsteady stretching surface placed into a porous medium is examined. Similarity transformations are used to convert time-dependent partial differential equations into nonlinear ordinary differential equations. The transformed equations are then solved analytically by the homotopy analysis method and numerically by the shooting technique combined with the Runge–Kutta–Fehlberg method. The results obtained by both methods are compared with available reported data. The effects of the Casson fluid parameter, magnetic field parameter, and unsteadiness parameter on the velocity and local skin friction coefficients are discussed in detail.     

Viscous flow over a non-linearly stretching sheet in the presence of a chemical reaction and magnetic field

The steady two-dimensional flow of an incompressible viscous and electrically conducting fluid over a non-linearly semi-infinite stretching sheet in the presence of a chemical reaction and under the influence of a magnetic field is analyzed. The equations governing the flow and concentration field are reduced to a system of coupled non-linear ordinary differential equations. These non-linear differential equations are solved numerically by using the shooting method. The numerical results for the concentration field are presented through graphs.     

Similarity Solution of Unsteady Boundary Layer Equations with a Magnetic Field

The unsteady laminar incompressible boundary layer flow of an electricallyconducting fluid in the stagnation region of two-dimensional and axisymmetricbodies with an applied magnetic field has been studied. The boundary layerequations which are parabolic partial differential equations with threeindependent variables have been reduced to a system of ordinary differential equations by using suitable transformations and then solved numerically using a shooting method. Here, we have obtained new solutions which are solutions of both the boundary layer and Navier-Stokes equations.     

On the flow of a fluid–particle mixture between two rotating cylinders, using the theory of interacting continua

Mixture theory is used to develop a model for a flowing mixture of solid particulates and a fluid. Equations describing the flow of a two-component mixture consisting of a Newtonian fluid and a granular solid are derived. These relatively general equations are then reduced to a system of coupled ordinary differential equations describing Couette flow between concentric rotating cylinders. The resulting boundary value problem is solved numerically and representative results are presented.     

Three-dimensional mixed convection squeezing flow

The unsteady mixed convection squeezing flow of an incompressible Newtonian fluid between two vertical parallel planes is discussed. The fluid is electrically conducting. The governing equations are transformed into ordinary differential equations (ODEs) by appropriate transformations. The transformed equations are solved successfully by a modern and powerful technique. The effects of the emerging parameters on the flow and heat transfer characteristics are studied and examined. The values of the skin friction coefficient and the local Nusselt number are tabulated and analyzed.     

Viscous dissipation and thermal radiation effects on the magnetohydrodynamic (MHD) flow and heat transfer over a stretching slender cylinder

An axisymmetric magnetohydrodynamic (MHD) boundary layer flow and heat transfer of a fluid over a slender cylinder are investigated numerically. The effects of viscous dissipation, thermal radiation, and surface transverse curvature are taken into account in the simulations. For this purpose, the governing partial differential equations are transformed to ordinary differential equations by using appropriate similarity transformations. The resultant ordinary differential equations along with appropriate boundary conditions are solved by the fourth-order Runge–Kutta method combined with the shooting technique. The effects of various parameters on the velocity and temperature profiles, local skin friction coefficient, and Nusselt number are analyzed.     

Scaling Transformation for the Effect of Temperature-Dependent Fluid Viscosity with Thermophoresis Particle Deposition on MHD-Free Convective Heat and Mass Transfer Over a Porous Stretching Surface

This article concerns with a steady two-dimensional flow of an electrically conducting incompressible fluid over a vertical stretching sheet. The flow is permeated by a uniform transverse magnetic field. The fluid viscosity is assumed to vary as a linear function of temperature. A scaling group of transformations is applied to the governing equations. The system remains invariant due to some relations among the parameters of the transformations. After finding three absolute invariants, a third-order ordinary differential equation corresponding to the momentum equation, and two second-order ordinary differential equations corresponding to energy and diffusion equations are derived. The equations along with the boundary conditions are solved numerically. It is found that the decrease in the temperature-dependent fluid viscosity makes the velocity to decrease with the increasing distance of the stretching sheet. At a particular point of the sheet, the fluid velocity decreases with the decreasing viscosity but the temperature increases in this case. Impact of thermophoresis particle deposition in the presence of temperature-dependent fluid viscosity plays an important role on the concentration boundary layer. The results, thus, obtained are presented graphically and discussed.     

Free Convection Heat Transfer over a Vertical Cylinder in a Saturated Porous Medium Using a Local Thermal Non-equilibrium Model

In this article, free convection heat transfer over a vertical cylinder with variable surface temperature distributions in a porous medium is analyzed. It is assumed that the fluid and solid phases are not in local thermal equilibrium and, therefore, a two-temperature model of heat transfer is applied. The coupled momentum and energy equations are presented and then they are transformed into ordinary differential equations. The similarity equations are solved numerically. The resulting velocity, streamlines, temperature distributions for fluid and solid phases are shown for different values of parameters entering into the problem. The calculated values of the local Nusselt numbers for both solid and fluid phases are also shown.     

Free convection effects on a vertical cone with variable viscosity and thermal conductivity

The present paper deals with a flow of a viscous incompressible fluid along a heated vertical cone, with due allowance for variations of viscosity and thermal diffusivity with temperature. The fluid viscosity is assumed to be an exponential function of temperature, and the thermal diffusivity is assumed to be a linear function of temperature. The governing equations for laminar free convection of the fluid are transformed into dimensionless partial differential equations, which are solved by a finite difference method with the Crank–Nicolson implicit scheme. Dependences of the flow parameters on the fluid viscosity and thermal conductivity are obtained.     

Analytic Approximate Solution for a Flow of a Second-Grade Viscoelastic Fluid in a Converging Porous Channel

The problem of a two-dimensional steady flow of a second-grade fluid in a converging porous channel is considered. It is assumed that the fluid is injected into the channel through one wall and sucked from the channel through the other wall at the same velocity, which is inversely proportional to the distance along the wall from the channel origin. The equations governing the flow are reduced to ordinary differential equations. The boundary-value problem described by the latter equations is solved by the homotopy perturbation method. The effects of the Reynolds and crossflow Reynolds number on the flow characteristics are examined.     

Squeeze-film flow of a viscoelastic fluid a lubrication model

In this paper the constant-speed squeezing flow of a model viscoelastic fluid which allows for a Carreau-type viscosity and a stress overshoot in a start up of a shear flow is considered. Based on the knowledge of the full numerical solution by a Boundary Element method a set of lubrication equations is constructed which we believe to retain all the essential physics. The lubrication equations consist of four partial differential equations in time and one spatial coordinate. These are more tractable than the full set of governing equations (partial differential equations in time and two spatial coordinates). The lubrication equations are solved by a Finite Difference scheme, and the results are compared favourably with the full numerical solutions. The mechanism for load enhancement is also discussed.     

MHD stagnation-point flow and heat transfer towards stretching sheet with induced magnetic field

The problem of the steady magnetohydrodynamic (MHD) stagnation-point flow of an incompressible viscous fluid over a stretching sheet is studied. The effect of an induced magnetic field is taken into account. The nonlinear partial differential equations are transformed into ordinary differential equations via the similarity transformation. The transformed boundary layer equations are solved numerically using the shooting method. Numerical results are obtained for various magnetic parameters and Prandtl numbers. The effects of the induced magnetic field on the skin friction coefficient, the local Nusselt number, the velocity, and the temperature profiles are presented graphically and discussed in detail.     

Scaling group transformation for the effect of temperature-dependent nanofluid viscosity on an mhd boundary layer past a porous stretching surface

This paper deals with a steady two-dimensional flow of an electrically conducting incompressible fluid over a porous vertical stretching sheet. The flow is permeated by a uniform transverse magnetic field. The fluid viscosity is assumed to vary as a linear function of temperature. The partial differential equations governing the problem under consideration are transformed by a special form of Lie group transformations, namely, scaling group of transformations, into a system of ordinary differential equations, which are solved numerically using the Runge-Kutta-Gill algorithm and the shooting method. The conclusion is drawn that the flow field and temperature profiles are significantly influenced by the Lewis number, Brownian motion number, and thermophoresis number.     

MHD axisymmetric flow of third grade fluid between porous disks with heat transfer

The magnetohydrodynamic(MHD) flow of the third grade fluid between two permeable disks with heat transfer is investigated.The governing partial differential equations are converted into the ordinary differential equations by suitable transformations.The transformed equations are solved by the homotopy analysis method(HAM).The expressions for square residual errors are defined,and the optimal values of convergencecontrol parameters are selected.The dimensionless velocity and temperature fields are examined for various dimensionless parameters.The skin friction coefficient and the Nusselt number are tabulated to analyze the effects of dimensionless parameters.     

A variational analytical approach to time dependent flow of oldroyd B fluid in circular tube

In the present investigation the time dependent flow of an Oldroyd fluid B in a horizontal cylindrical pipe is stuided by the variational analytical approach developed by author. The time dependent problem is mathematically reduced to a partial differential equation of third order. Using the improved variational approach due to Kantorovich the partial differential equation can be reduced to a system of ordinary differential equations for different approximations. The ordinary differential equations are solved by the method of the Laplace transform which is led to an analytical form of the solutions. Project supported by TWAS and Chinese Academy of Sciences and the National Science Foundation of China     

Similarity solutions to viscous flow and heat transfer of nanofluid over nonlinearly stretching sheet

The boundary-layer flow and heat transfer in a viscous fluid containing metallic nanoparticles over a nonlinear stretching sheet are analyzed. The stretching velocity is assumed to vary as a power function of the distance from the origin. The governing partial differential equation and auxiliary conditions are reduced to coupled nonlinear ordinary differential equations with the appropriate corresponding auxiliary conditions. The resulting nonlinear ordinary differential equations (ODEs) are solved numerically. The effects of various relevant parameters, namely, the Eckert number Ec, the solid volume fraction of the nanoparticles φ, and the nonlinear stretching parameter n are discussed. The comparison with published results is also presented. Different types of nanoparticles are studied. It is shown that the behavior of the fluid flow changes with the change of the nanoparticles type.     

Oblique stagnation slip flow of a micropolar fluid

This paper considers the problem of steady two-dimensional boundary layer flow of a micropolar fluid near an oblique stagnation point on a fixed surface with Navier’s slip condition. It is shown that the governing nonlinear partial differential equations admit similarity solutions. The resulting nonlinear ordinary differential equations are solved numerically using the Keller box method for some values of the governing parameters. It is found that the flow characteristics depend strongly on the micropolar and slip parameters.     

Viscous Dissipation and Thermal Radiation Effects on Mixed Convection from a Vertical Plate in a Non-Darcy Porous Medium

The paper presents an investigation of the influence of thermal radiation and viscous dissipation on the mixed convective flow due to a vertical plate immersed in a non-Darcy porous medium saturated with a Newtonian fluid. The physical properties of the fluid are assumed to be constant. The Rosseland approximation is used to describe the radiative heat flux in the energy equation. The governing partial differential equations are transformed into a system of ordinary differential equations and solved numerically using a shooting method. The results are analyzed for the effects of various physical parameters such as viscous dissipation, thermal radiation, mixed convection parameters, and the modified Reynolds number on dynamics. The heat transfer coefficient is also tabulated for different values of the physical parameters.