A Conceptual Study of Cavity Aeroacoustics Control Using Porous Media Inserts

In this study, an integrated flow simulation and aeroacoustics prediction methodology is applied to testing a sound control technique using porous inserts in an open cavity. Large eddy simulation (LES) combined with a three-dimensional Ffowcs Williams–Hawkings (FW–H) acoustic analogy is employed to predict the flow field, the acoustic sources and the sound radiation. The Darcy pressure – velocity law is applied to conceptually mimic the effect of porous media placed on the cavity floor and/or rear wall. Consequently, flow in the cavity could locally move in or out through these porous walls, depending on the local pressure differences. LES with “standard” subgrid-scale models for compressible flow is carried out to simulate the flow field covering the sound source and near fields, and the fully three-dimensional FW–H acoustic analogy is used to predict the sound field. The numerical results show that applying the conceptual porous media on cavity floor and/or rear wall could decrease the pressure fluctuations in the cavity and the sound pressure level in the far field. The amplitudes of the dominant oscillations (Rossiter modes) are suppressed and their frequencies are slightly modified. The dominant sound source is the transverse dipole term, which is significantly reduced due to the porous walls. As a result, the sound pressure in the far field is also suppressed. The preliminary study reveals that using porous-inserts is a promising technology for flow and sound radiation control.     

Flow-acoustic coupling in coaxial side branch resonators with rectangular splitter plates

Flow past symmetrically located side branches mounted in a duct can give rise to pronounced flow oscillations due to coupling between separated shear layers and standing acoustic waves. The acoustically-coupled flows were investigated using digital particle image velocimetry (PIV) in conjunction with unsteady pressure measurements. Global instantaneous, phase- and time-averaged flow images were evaluated to provide insight into the flow physics during flow tone generation. Onset of the locked-on resonant states was characterized in terms of the acoustic pressure amplitude and frequency of the resonant pressure peak. Structure of the acoustic noise source was discussed in terms of patterns of generated acoustic power, which was evaluated by applying the vortex sound theory in conjunction with global quantitative flow imaging and numerical simulation of the acoustic field. In addition to the basic side branch configuration, the effect of bluff rectangular splitter plates located along the centerline of the main duct was investigated. The first mode of the shear layer oscillation was inhibited by the presence of the plates, which resulted in substantial reduction of the amplitude of acoustic pulsations and the strength of the acoustic source.     

Radiation and scattering of sound from a vortex ring

The mechanisms of generation and scattering of sound by a vortex ring are investigated on the basis of fluid dynamics. The vortex ring can serve as a simple dynamic model of the large-scale structures observed in shear flows. Moreover, it is probably the most easily studied vortex element that can be created experimentally. The sound scattering investigation also served to determine the extent to which the vortex is affected by sound, its selectivity with respect to such parameters as the acoustic frequency, the angle of incidence of the wave, etc. The perturbed motion is considered against the background of the steady-state motion of the ring. The perturbed motion in the vortex core is determined on the basis of linear incompressible fluid dynamics. Two terms of the expansion in the M number of the far acoustic field generated by the perturbations in the core are found in accordance with Lighthill's theory. The acoustic power and directivity of the radiation and the acoustic instability growth rate are calculated. It is shown that the scattering of sound by the vortex ring is a resonance effect, and the scattering amplitude near resonance is determined. The acoustic action on the hydrodynamic structure of the flow in the core of the ring is especially intense near the resonances and extends over a period short as compared with the characteristic time of the acoustic instability.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 3, pp. 83–95, May–June, 1987.     

Model for the Formation of Acoustic Self-Oscillations in a Chamber with a Jet Flowing Through its Nozzle

This paper describes free acoustic oscillations of gas in a chamber with a jet flowing through its nozzle in the case of nonstationary intensity component of vortex sheet flowing down from the edge of the nozzle. There is established feedback between acoustic oscillations and oscillations induced by a corresponding vortex sheet component. It is shown that, in the presence of given feedback, there could be instability of acoustic oscillations, which would result in acoustic self-oscillations in the chamber. The boundaries of the domain in which instability is formed are determined by developing a mathematical model of stable acoustic oscillations in the chamber with account for the influence of the vortex sheet.     

Shock-Wave–Vortex Interactions: Shock and Vortex Deformations, and Sound Production

In this paper we study the interaction of a shock wave with a cylindrical vortex. The objective of the study is to characterize the shock and vortex deformations and the mechanism of sound generation. The approach relies on the solution of the two-dimensional Euler equations by means of a high order finite volume weighted-ENO scheme. In order to provide some guidance into the analysis we have also developed an acoustic analogy of the problem by formulating a wave equation for the pressure disturbance that is solved analytically by means of Green's functions. A systematic study has been conducted by investigating the effects of vortex intensity and shock strength. Specifically, we have determined the dependence of shock distortion and vortex compression, and its subsequent nutation upon shock and vortex strengths. The acoustic field generated through shock--vortex interactions has been found to evolve in three stages and to exhibit a three sound quadrupolar directivity. In the early stages of the interaction the sound generated due to shock distortion shows a dipolar character, which then changes to a quadrupolar one due to a restoring mechanism that acts during the interaction of the shock with the rear part of the vortex. In the third stage secondary sounds are formed, which also show a quadrupolar directivity. The acoustic analogy applied to weak shock--vortex interactions also confirms the numerically predicted sound generation mechanism. Received 12 July 1999 and accepted 18 November 1999     

Dual cylinder inviscid vortex sound of low Mach number

The unsteady motions of an inviscid vortex under the influence of a cylinder pair in the presence of a low Mach number mean flow and the corresponding sound generation are examined in the present study. The two cylinders are in close proximity. A semi-analytical approach using the conformal mapping together with the potential theory is adopted. The results show that the vortex will interact intensively with the cylinders under the right combinations of mean flow direction and initial vortex position. Such interactions result in a high rate of change of vortex propagation velocity, strong fluctuating forces on cylinder and strong sound radiations. However, it is found that much stronger acoustic energy radiation will result when the vortex approaches the cylinder pair from the bottom than from the top, unless the mean flow is nearly perpendicular to the horizontal cylinder pair axis. Stronger sound radiation is also observed for the identical cylinder cases in general, except the flow direction is close to some critical values.     

Prediction of vortex shedding from bluff bodies in the presence of a sound field

The separated flow around a rectangular cylinder, in the presence of a transverse duct resonant acoustic mode, is modelled using a vortex method. The instantaneous transfer of power between the mean flow and the acoustic field is predicted using Howe's theory of aerodynamic sound. Whether the net acoustic energy per cycle generated is positive or negative depends on the phase of the acoustic cycle at which vortex clouds arrive at the trailing edge of the cylinder.     

激波-涡干扰声场的数值研究

采用高精度差分格式求解非定常可压缩Navier-Stokes方程,对激波－单涡／双涡相互干扰产生的声场进行了直接数值。详细研究了波－涡干扰声场结构的早期发展阶段,将激波－单涡的计算结果和相应实验进行 对比,并给出近场声压的衰减规律。在此基础上模拟较为复杂的激波－双涡干扰,给出不同旋涡旋转方向下的声场结构。     

Analysis of self-sustained oscillation sources in segmented flows

The analysis of self-sustained oscillations in segmented flow generated through porous walls has been carried out over a wide range of velocity levels; in fact, we studied a cold gas flow induced by injection through different wall injecting blocks. We have attempted in this study to analyse the potential unstable development occurring in solid propellant rocket motors. We lay emphasis upon the phenomenon of wall vortex shedding insofar as it conduces to acoustic mode resonance in the whole chamber, within whose confines impingement of such structures generates a source of noise. It is on account of segmented flow that the thin shear layer develops and that the aforementioned vortex shedding comes to induce aero-acoustic coupling. Subsequent experimental results highlight a link in such flows between these two noise sources - they also allow one to observe a pronounced form of selectivity in the energy transfer, i.e. in longitudinal acoustic mode amplification, which has an attested effect upon all of the pressure oscillations in the chamber.     

Toward accurate hybrid prediction techniques for cavity flow noise applications

A large variety of hybrid computational aeroacoustics (CAA) approaches exist differing from each other in the way the source region is modeled, in the way the equations are used to compute the propagation of acoustic waves in a non-quiescent medium, and in the way the coupling between source and acoustic propagation regions is made. This paper makes a comparison between some commonly used numerical methods for aeroacoustic applications. The aerodynamically generated tonal noise by a flow over a 2D rectangular cavity is investigated. Two different cavities are studied. In the first cavity (L/D=4, M=0.5), the sound field is dominated by the cavity wake mode and its higher harmonics, originating from a periodical vortex shedding at the cavity leading edge. In the second cavity (L/D=2, M=0.6), shear-layer modes, due to flow-acoustic interaction phenomena, generate the major components in the noise spectrum. Source domain modeling is carried out using a second-order finite-volume large eddy simulation. Propagation equations, taking into account convection and refraction effects, are solved using high-order finite-difference schemes for the linearized Euler equations and the acoustic perturbation equations. Both schemes are compared with each other for various coupling methods between source region and acoustic region. Conventional acoustic analogies and Kirchhoff methods are rewritten for the various propagation equations and used to obtain near-field acoustic results. The accuracy of the various coupling methods in identifying the noise-generating mechanisms is evaluated. In this way, this paper provides more insight into the practical use of various hybrid CAA techniques to predict the aerodynamically generated sound field by a flow over rectangular cavities. Copyright © 2009 John Wiley & Sons, Ltd.     

Computational analysis of exit conditions on the sound field of turbulent hot jets

A hybrid computational fluid dynamics (CFD) and computational aeroacoustics (CAA) method is used to compute the acoustic field of turbulent hot jets at a Reynolds number $Re=316,000$ and a Mach number $M=0.12$. The flow field computations are performed by highly resolved large-eddy simulations (LES), from which sound source terms are extracted to compute the acoustic field by solving the acoustic perturbation equations (APE). Two jets are considered to analyze the impact of exit conditions on the resulting jet sound field. First, a jet emanating from a fully resolved non-generic nozzle is simulated by solving the discrete conservation equations. This computation of the jet flow is denoted free-exit-flow (FEF) formulation. For the second computation, the nozzle geometry is not included in the computational domain. Time averaged exit conditions, i.e. velocity and density profiles of the first formulation, plus a jet forcing in form of vortex rings are imposed at the inlet of the second jet configuration. This formulation is denoted imposed-exit-flow (IEF) formulation. The free-exit-flow case shows up to 50% higher turbulent kinetic energy than the imposed-exit-flow case in the jet near field, which drastically impacts noise generation. The FEF and IEF configurations reveal quite a different qualitative behavior of the sound spectra, especially in the sideline direction where the entropy source term dominates sound generation. This difference occurs since the noise sources generated by density and pressure fluctuations are not perfectly modeled by the vortex ring forcing method in the IEF solution. However, the total overall sound pressure level shows the same qualitative behavior for the FEF and IEF formulations. Towards the downstream direction, the sound spectra of the FEF and IEF solutions converge.     

Application of an acoustic analogy to PIV data from rectangular cavity flows

The present paper describes a method to derive information about the acoustic emission of a flow using particle image velocimetry (PIV) data. The advantage of the method is that it allows studying sound sources, the related flow phenomena and their acoustic radiation into the far field, simultaneously. In a first step the time history of two-dimensional instantaneous pressure fields is derived from planar PIV data. In a successive step the Curle’s acoustic analogy is applied to the pressure data to obtain the acoustic radiation of the flow. The test cases studied here are two rectangular cavity flows at very low Mach number with different aspect ratios L/H. The main sound source is located at the cavity trailing edge and it is due to the impingement of vortices shed in the shear layer. It is shown that the flow emits sound with a main directivity in the upstream direction for the smaller aspect ratio and the directivity is more uniform for the larger aspect ratio. In the latter case the acoustic pressure spectra has a broader character due to the impact of the downstream recirculation zone onto the shear layer instabilities, destroying their regular pattern and alternating the main sound source.     

Characteristics of Oscillations in Supersonic Open Cavity Flows

Characteristics of oscillations in supersonic open cavity flows are investigated numerically using hybrid RANS/LES (Reynolds-Averaged Navier-Stokes/Large Eddy Simulation) method. The oscillation regimes and feedback mechanisms for the supersonic cavity flows are identified and analyzed. The calculation captures a mixed shear-layer/wake oscillation mode in the flow of Ma = 1.75, where these two modes occur alternately. The shear-layer mode and wake mode are driven by vortex convection-acoustic feedback and absolute instability, respectively. In particular, the results indicate that the feedback-acoustic-wave in the shear-layer mode is probably generated by the reflection of the downstream-traveling pressure wave, associated with the shed vortex in the shear layer, on the aft wall. The cavity flow of Ma = 2.52 is then simulated to see the influence of Mach number. It is found that the increase of Mach number may decrease the amplitude of the fluctuations in the shear layer, inhibiting the transition to wake mode. Furthermore, the influence of upstream injection is also studied, where the results show that the injection only weakens the oscillations and faintly shifts the resonant frequencies.     

Linearized and non‐linear acoustic/viscous splitting techniques for low Mach number flows

Computation of the acoustic disturbances generated by unsteady low‐speed flow fields including vortices and shear layers is considered. The equations governing the generation and propagation of acoustic fluctuations are derived from a two‐step acoustic/viscous splitting technique. An optimized high order dispersion–relation–preserving scheme is used for the solution of the acoustic field. The acoustic field generated by a corotating vortex pair is obtained using the above technique. The computed sound field is compared with the existing analytic solution. Results are in good agreement with the analytic solution except near the centre of the vortices where the acoustic pressure becomes singular. The governing equations for acoustic fluctuations are then linearized and solved for the same model problem. The difference between non‐linear and linearized solutions falls below the numerical error of the simulation. However, a considerable saving in CPU time usage is achieved in solving the linearized equations. The results indicate that the linearized acoustic/viscous splitting technique for the simulation of acoustic fluctuations generation and propagation by low Mach number flow fields seems to be very promising for three‐dimensional problems involving complex geometries. Copyright © 2003 John Wiley & Sons, Ltd.     

Phenomenology of Kármán vortex streets in oscillatory flow

Vortex wakes of circular cylinders at low Reynolds numbers have been investigated. Sound waves are superimposed on the flow in mean flow direction. In this configuration the Kármán vortices are shed at the sound frequency or at subharmonics of the sound frequency. The Karman vortex street is treated as a nonlinear self-excited flow oscillator with forced oscillations. Using a flow visualization technique a variety of wake structures has been identified as a function of sound frequency and sound amplitude, but independent of the Reynolds number. The superimposed sound influences the distribution of circulation and accordingly the shedding mechanism. Primary vortex and secondary vortex are shed simultaneously from one side of the cylinder. The alternate vortex shedding is arranged spatially and temporally. Structures along the vortex axes are revealed.Parts of this paper have been presented at IUTAM Congress 1984, Lyngby, Denmark, and at ICNM Conference 1985, Shanghai, P. R. China     

高亚声速湍流喷流气动噪声数值分析

为适应航空噪声管制规定要求,发动机喷流噪声控制成为目前气动声学研究中的重要课题,预测分析喷流噪声辐射并揭示其产生机理将为噪声控制奠定基础.采用高精度并行LES（large eddy simulation）方法计算分析马赫数0.9高亚声速喷流的湍流演化和气动噪声现象.首先,仔细验证喷流LES湍流场计算保真性,并分析流场中不同尺度涡结构的演化形态.其次,利用可穿透面FW-H（Ffowcs Williams and Hawkings）方法外推喷流近场声源数据获得精确声辐射远场,进而分析声场主导声模态特性.最后,通过分析声源机制、分离声模态等方法研究势流核末端大尺度拟序涡运动演化形成的低波数波包在噪声主导声模态产生中的重要作用.数值结果表明LES结合可穿透面FW-H方法可精确预测高亚声速喷流的流场及声场特征,且数值分析揭示涡环对并形成的大尺度拟序结构在喷流中心线上沿径向融合,产生了在远场低方位角占优的主导声模态,并构成强指向性声场,噪声峰值方位角约为30°.      

Numerical and experimental investigation of flow-acoustic resonance of side-by-side cylinders in a duct

The phenomenon of flow-excited acoustic resonance is a design concern in many engineering applications, especially when wakes of bluff bodies are encountered in ducts, piping systems, heat exchangers, and other confined systems. In this paper, the case of self-excited acoustic resonance of two side-by-side cylinders in a duct with cross-flow is investigated both numerically and experimentally for a single spacing ratio of T/D=2.5, where D is the diameter of the cylinders and T is the centre-to-centre distance between them. The numerical investigation is performed using a finite-volume method at a Reynolds number of 3.0×10⁴ to simulate the unsteady flow field, which is then coupled with an imposed resonant sound field of the first acoustic cross-mode of the duct calculated through the use of Finite Element Analysis (FEA). The experimental investigation has been performed using phase-locked Particle Image Velocimetry (PIV) of the flow field during the occurrence of a self-excited acoustic resonance condition in the duct. The results of both methods reveal that the flow-excited acoustic resonance produces a strong oscillatory flow pattern in the cylinder wakes, with strong in-phase vortex shedding being synchronized by the acoustic resonance. The distribution and strength of the aeroacoustic sources and sinks within the flow field have been computed by means of Howe׳s theory of aerodynamic sound for both the experimental and numerical cases, with the results of the two methods comparing favourably, showing comparable trends in the oscillating flow fields, and very similar trends in the distribution of net acoustic power.     

Investigation of aeroacoustic noise generation by simultaneous particle image velocimetry and microphone measurements

A correlation technique is tested, which enables the identification of flow structures that are involved in sound generation processes. At first, the method is applied to the problem of induced noise from flow over a cylinder. The velocity field around a circular cylinder is measured by particle image velocimetry (PIV), while the radiated sound is recorded with a microphone. Both measurements are conducted in a synchronized manner so as to enable the calculation of the cross-correlation between velocity or vorticity fluctuations and the acoustic pressure. The therewith obtained coefficient matrix provides time- and space-resolved information about the statistical dependency between flow structures and the acoustic pressure. Furthermore, a proper orthogonal decomposition (POD) is applied to the velocity field. Then the correlation between dominating modes and the acoustic pressure is computed to identify which modes are mainly involved in the sound generation. Finally, the developed method is applied to the more applied problem of the flow-field inside a leading-edge slat-cove. The results show that, in this case, the signal-to-noise ratio is too low to allow an identification of noise-relevant flow structures, as opposed to the case of the cylinder wake flow, where 5,000 PIV recordings were sufficient to identify the flow structures, which are involved in the noise-generation process. A maximum in spatial distribution of the cross-correlation coefficient is observed 1.6 diameters downstream of the cylinder; its value decreases as one moves further downstream. In this area of maximal correlation, a rapid acceleration of the released vortices takes place. The cross-correlation coefficient fluctuates over time in a sine-type oscillation with maximum values of about and show a periodic behavior with a phase shift of π/2 with respect to each other. These regular oscillations can be explained by coherent periodic structures in the flow-field. These structures generate a sound field with the same periodicity, which is perceived as tone. Hence, the correlation between the velocity fluctuations and the acoustic pressure show oscillations identical to those of the input signals. A filtering of uncorrelated noise can be observed; this being caused by the averaging process during the cross-correlation calculation. The correlation with the eigenmodes of a POD gives correlation coefficients, which are no larger than the correlation with a local near-field quantity.     

THE OSCILLATION MODE OF INCOMPRESSIBLE CAVITY FLOW

采用二维大涡模拟方法进行了空腔水流场的数值计算, 考察空腔前缘动量损失厚度及来流速度等因素如何影响空腔流的振荡, 同时考察了空腔长深比与空腔流振荡模式的关系. 用空腔水流场的粒子图像测速测量结果验证了数值计算的可信性.结果表明, 空腔水流是否发生振荡取决于壁面摩擦速度.瞬时涡结构和空腔阻力系数2个方面的特征显示空腔水流场有2种典型的振荡模式, 剪切层模式与尾流模式, 确定振荡模式的关键因素是空腔长深比.     

Tip gap height effects on the aerodynamic performance of a cavity squealer tip in a turbine cascade in comparison with plane tip results: part 2—aerodynamic losses

Tip gap height effects on aerodynamic losses downstream of a cavity squealer tip have been investigated in a linear turbine cascade for power generation, in comparison with plane tip results. Three-dimensional flow fields are measured with a five-hole probe for tip gap height-to-chord ratios of h/c = 0.5, 1.0, 1.5 and 2.0%. The cavity squealer tip has a full length squealer with its rim height-to-chord ratio of 5.51%. For a fixed value of h/c, the tip leakage vortex for the cavity squealer tip is always weaker than that for the plane tip, and the flow field in the passage vortex region for the cavity squealer tip is less influenced by the tip leakage flow than that for the plane tip. For the cavity squealer tip, there is no appreciable change in local aerodynamic loss with h/c in the passage vortex region, but local aerodynamic loss in the tip leakage vortex region increases with h/c. The roles of the cavity squealer tip in reducing aerodynamic loss in comparison with the plane tip case are twofold: (1) the cavity squealer tip decreases the leakage flow discharge in the region from the leading edge to the mid-chord, which leads to an aerodynamic loss reduction in the passage vortex region and (2) it also decreases the leakage flow discharge downstream of the mid-chord, which results in an aerodynamic loss reduction in the tip leakage vortex region.