Graphene oxide-based two-dimensional molecular brush for efficient removal of lead and copper ions from water media

In this study, graphene oxide (GO)-based two-dimensional molecular brush was fabricated by grafting polyacrylamide onto GO nanosheets for efficient removal of Pb²⁺ and Cu²⁺ from water media. Owing to the rich oxygen and nitrogen functional groups in the composites, the synthetic GO two-dimensional molecular brush can get the maximum adsorption capacity of 268.4 mg/g for Pb²⁺ and 127.2 mg/g for Cu²⁺, respectively. Moreover, the interspaces between the stacked two-dimensional molecular brushes provide fast pathways for the diffusion of heavy metal ions. As a result, GO-based two-dimensional molecular brush can reach the adsorption equilibrium within 60 min. These results indicated that the synthetic GO-based two-dimensional molecular brush is a promising adsorbent to separate heavy metal ions from water media.     

IR Spectroscopic Study of the Interaction of Transition Metal Ions with Hydroxyapatite Modified by Potassium Ferrocyanide

IR spectroscopy was used to study the modification of hydroxyapatite by potassium ferrocyanide and the interaction of transition metal ions with the modified adsorbent. The structural changes of hydroxyapatite upon the adsorption of Zn²⁺ ions were studied by X-ray phase analysis. Potassium ferrocyanide was found to interact with the surface hydroxyl groups of hydroxyapatite through the nitrogen unshared electron pair. Co²⁺, Ni²⁺, and Zn²⁺ ions were found to eliminate outer-sphere K⁺ ions of adsorbed ferrocyanide to give Fe²⁺— CN—M²⁺— NC—Fe²⁺ bridging structures. Zn²⁺ cations additionally eliminate a part of the Ca²⁺ ions from structural positions of hydroxyapatite, which leads to the appearance of a two-phase hydroxyapatite–sholzite system with heterogeneous distribution of the Ca²⁺ ions in the mot her mineral phase, while the Zr²⁺ ions are found in the new sholzite phase.     

Combination of cellulosic materials and metallic ions

Cellulosic materials (DP, SCP) and PVA fibers were treated with four kinds of metallic ions (Ca²⁺, Fe²⁺, Fe³⁺, Ce⁴⁺), and the adsorption behavior was studied to elucidate the manner in which the celluloses and the metallic ions were combined. The effects of treatment temperature, time, and concentration upon the amount of the metallic ions adsorbed were examined. With Ca²⁺ and Fe²⁺, the effects of such factors on the adsorption were slight, while with Fe³⁺ and Ce⁴⁺ the effects of time, temperature, and ion concentration were pronounced. Also, it was evident that the amount (molar) of equilibrium adsorption of Ca²⁺ or Fe²⁺ was approximately the same as the content of carboxyl groups in the cellulose sample, and the amount of equilibrium adsorption of Fe³⁺ or Ce⁴⁺ was approximately the same as that of total carbonyl group content. When the samples which had adsorbed these metallic ions were treated with 0.1N hydrochloric acid, the Ca²⁺ and Fe²⁺ were completely desorbed while about 80% of the adsorbed Fe³⁺ and Ce⁴⁺ remained. These results indicate that there are two types of combinations of cellulosic materials and metallic ions involved: one is thought to be an ionic bond, while the other is considered to be a chelate bond.     

Synthesis of poly(hydroxamic acid) ligand from polymer grafted corn‐cob cellulose for transition metals extraction

Poly(hydroxamic acid) ligand was synthesized using ester functionalities of cellulose‐graft‐poly(methyl acrylate) copolymer, and products are characterized by Fourier transform infrared spectroscopy, field emission scanning electron microscopy, high‐resolution transmission electron microscopy, and X‐ray photoelectron spectroscopy analysis. The poly(hydroxamic acid) ligand was utilized for the sensing and removal of transition metal ions form aqueous solutions. The solution pH is found a key factor for the optical detection of metal ions, and the reflectance spectra of the [Cu‐ligand]ⁿ⁺ complex were observed to be the highest absorbance 99.5% at pH 6. With the increase of Cu²⁺ ion concentration, the reflectance spectra were increased, and a broad peak at 705 nm indicated that the charge transfer (π‐π transition) complex was formed. The adsorption capacity with copper was found to be superior, 320 mg g^?1, and adsorption capacities for other transition metal ions were also found to be good such as Fe³⁺, Mn²⁺, Co³⁺, Cr³⁺, Ni²⁺, and Zn²⁺ were 255, 260, 300, 280, 233, and 223 mg g^?1, respectively, at pH 6. The experimental data show that all metal ions fitted well with the pseudo‐second‐order rate equation. The sorption results of the transition metal ions onto ligand were well fitted with Langmuir isotherm model (R² > 0.98), which implies the homogenous and monolayer character of poly(hydroxamic acid) ligand surface. Eleven cycles sorption/desorption process were applied to verify the reusability of this adsorbent. The investigation of sorption and extraction efficiency in each cycle indicated that this new type of adsorbent can be recycled in many cycles with no significant loss in its original detection and removal capability. Copyright © 2016 John Wiley & Sons, Ltd.     

Preparation of hydrazinodeoxycellulose and carboxyalkyl hydrazinodeoxycelluloses and their adsorption behavior toward heavy metal ions

Nitrogen-containing cellulose derivatives hydrazinodeoxycellulose (HDC) and carboxyalkyl hydrazinodeoxycelluloses (α- and β-CAHDCs) were prepared from 6-chlorodeoxycellulose (CDC). Their adsorption of divalent transition metal ions was determined from dilute aqueous solutions and compared with that of aminoalkyl celluloses (AmACs) reported previously. HDC scarcely adsorbs metal ions in the pH range of 1–2, whereas α- and β-CAHDCs adsorb metal ions in this pH range. However, the adsorption of metal ions on HDC increases rapidly with increasing pH and HDC more effectively adsorbs metal ions than α- and β-CAHDCs in weakly acidic conditions. The ability to adsorb Cu²⁺ ions was in the order of AmAC (carbon number in the diamine moiety m = 2) > HDC > α-CAHDC > β-CAHDC in the weakly acidic region. These adsorbents selectively adsorb Cu²⁺ ions from the solutions containing other metal ions such as Mn²⁺, Co²⁺, and Ni²⁺, and the Irving–Williams series is obeyed in these adsorbent/metal ion systems. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 3359–3363, 1997     

An approach by using near-infrared diffuse reflectance spectroscopy and resin adsorption for the determination of copper, cobalt and nickel ions in dilute solution

Near-infrared spectroscopy (NIRS) has been proved to be a powerful analytical tool and used in various fields, it is seldom, however, used in the analysis of metal ions in solutions. A method for quantitative determination of metal ions in solution is developed by using resin adsorption and near-infrared diffuse reflectance spectroscopy (NIRDRS). The method makes use of the resin adsorption for gathering the analytes from a dilute solution, and then NIRDRS of the adsorbate is measured. Because both the information of the metal ions and their interaction with the functional group of resin can be reflected in the spectrum, quantitative determination is achieved by using multivariate calibration technique. Taking copper (Cu²⁺), cobalt (Co²⁺) and nickel (Ni²⁺) as the analyzing targets and D401 resin as the adsorbent, partial least squares (PLS) model is built from the NIRDRS of the adsorbates. The results show that the concentrations that can be quantitatively detected are as low as 1.00, 1.98 and 1.00 mg L⁻¹ for Cu²⁺, Co²⁺ and Ni²⁺, respectively, and the coexistent ions do not influence the determination.     

Removal of Cd(II), Cu(II), and Pb(II) by adsorption onto natural clay: a kinetic and thermodynamic study

In this work, we study the elimination of three bivalent metal ions (Cd²⁺, Cu²⁺, and Pb²⁺) by adsorption onto natural illitic clay (AM) collected from Marrakech region in Morocco. The characterization of the adsorbent was carried out by X-ray fluorescence, Fourier transform infrared spectroscopy and X-ray diffraction. The influence of physicochemical parameters on the clay adsorption capacity for ions Cd²⁺, Cu²⁺, and Pb²⁺, namely the adsorbent dose, the contact time, the initial pH imposed on the aqueous solution, the initial concentration of the metal solution and the temperature, was studied. The adsorption process is evaluated by different kinetic models such as the pseudo-first-order, pseudo-second-order, and Elovich. The adsorption mechanism was determined by the use of adsorption isotherms such as Langmuir, Freundlich, and Temkin models. Experiments have shown that heavy metals adsorption kinetics onto clay follows the same order, the pseudo-second order. The isotherms of adsorption of metal cations by AM clay are satisfactorily described by the Langmuir model and the maximum adsorption capacities obtained from the natural clay, using the Langmuir isotherm model equation, are 5.25, 13.41, and 15.90 mg/g, respectively for Cd(II), Cu(II), and Pb(II) ions. Adsorption of heavy metals on clay is a spontaneous and endothermic process characterized by a disorder of the medium. The values of ΔH are greater than 40 kJ/mol, which means that the interactions between clay and heavy metals are chemical in nature.     

Novel nanostructured dendrimer based on 1,3-bis(4,6-dichloro-1,3,5-triazine-2-yl)urea as an excellent adsorbent for Pb2+, Ni2+, Co2+ and Zn2+ metal ions

Human health is seriously harmed by the consumption of poor-quality water. Due to high toxicity and water solubility, heavy metals are present in wastewater discharged from numerous industries. In the environmental realm, metal-containing water must be treated before being released. A dendrimer is a superior adsorbent for the removal of heavy metal ions due to its nanostructure and hydrophilic end group. In this work, a novel triazine-based hydroxy-terminated dendrimer up to generation three is designed employing a carbamide core. The dendrimer's structure was explored using FT-IR and ¹H NMR studies. Full generation dendrimers UG1.0, UG2.0, and UG3.0 were utilized as an adsorbent for Pb²⁺, Ni²⁺, Co²⁺ and Zn²⁺ metal ion removal from water in a series of tests. The ability of dendrimers to uptake Pb²⁺, Ni²⁺, Co²⁺ and Zn²⁺ metal ions was investigated under various pH, time interval and dendrimer generation parameters. The presence of metal in the dendrimer was confirmed by FT-IR studies of dendrimer-metal complexes. The overall results show that Pb²⁺, Ni²⁺, Co²⁺ and Zn²⁺ metal ions uptake increases with the generation, time, and pH.     

Selective removal of heavy metal ions using sol-gel immobilized and SPE-coated thiacrown ethers

Sorbent materials based on three thiacrown ethers, 1,4,7,10-tetrathiacyclododecane (12S4), 1,4,7,10,13-pentathiacyclopentadecane (15S5) and 1,4,7,10.13,16-hexathiacyclooctadecane (18S6) were prepared either by immobilizing the ligands into sol-gel (SG) matrix or coating on commercial solid phase extraction (SPE) column. SG sorbents were characterized by FT-IR, energy dispersive X-ray microanalysis (EDX) and thermogravimetric analysis/derivative thermogravimetric analysis (TGA/DTG). A marked thermal stability of the ligands when immobilized in sol-gel matrix was noted. The competitive sorption characteristics of a mixture of eleven metal ions (Mg²⁺, Zn²⁺, Cd²⁺, Co²⁺, Mn²⁺, Ca²⁺, Cu²⁺, Ni²⁺, Ag⁺, V⁴⁺, Hg²⁺) using: (i) batch method with ligands trapped in SG matrices, and (ii) off-line SPE column containing coated ligands were studied using ICP-MS. The extraction of metals were optimized for key parameters such as pH, contact time/flow rate, particle size (for SG sorbents) and ligand concentration. Under the optimized conditions, all the immobilized thiacrown ethers exhibited highest selectivity toward Ag⁺, with lesser responses to Hg²⁺ while the extraction of other metal ions were negligible. Among the SG sorbents, 18S6-SG offer the highest capacity and the best selectivity over Hg²⁺. However, for practical applications such as for selective isolation and preconcentration of Ag⁺, the SPE type especially based on 18S6 is preferred as analysis time and recoveries are favorable. The sorbents can be repeatedly used three times as there was no significant deterioration in the metal uptake (%E > 90%) or interference from other metal ions. The optimized procedures were successfully applied for the separation and preconcentration of traces Ag⁺ in different water samples.     

Enhancement of Cd2+ removal on CuMgAl-layered double hydroxide/montmorillonite nanocomposite: Kinetic,isotherm, and thermodynamic studies

In recent decades, great progress has been made in the application of adsorption processes to mitigate water pollution by hazardous metals. However, developing a highly efficient adsorbent is essential if the adsorption process is to be successfully applied in practical applications. In this study, a CuMgAl-layered double hydroxides/montmorillonite nanocomposite (CuMgAl-LDH/MMt) was prepared, characterized, and then used as a novel adsorbent for adsorption of Cd²⁺ ions from wastewater. The effects of initial pH, adsorbent dosage, agitation speed, particle size, contact time, initial Cd²⁺ concentration, and temperature on the pollutant removal efficiency were analyzed. An isotherm model reading revealed that the results of the experimental work were a good fit with the Freundlich model. The maximum adsorption capacity was reached at 174.87 mg/g under optimal conditions (pH 5, dosage of 0.02 g/l, agitation speed of 150 rpm, and particle size of 87 μm) at 50 ppm after 120 min of adsorption time. Kinetic studies showed that pseudo-second-order models were best fitted to the adsorption data, indicating heterogeneous adsorption of Cd²⁺ ions onto multilayer CuMgAl-LDH/MMt sites, and that the adsorption process is primarily chemical adsorption. Thermodynamic parameters (ΔS^o, ΔH^o, and ΔG^o) demonstrated that Cd²⁺ adsorption onto adsorbent was exothermic and spontaneous. Moreover, the synthesized adsorbent can be recovered after five consecutive cycles with a minimal reduction in the adsorption ability of 29.56 %. The study showed that specific heavy metals can be removed from aqueous solution by a newly prepared adsorbent due to its excellent morphology, high stability under a wide range of conditions, recyclability, and high adsorption capacity.     

Surface Modification of Porous Silica with Bi-thiophene Tripodal Ligand and Aplication to Adsorption of Toxic Metal Cations

The immobilization of a thiophene-based tripodal ligand, with a donor sulfur, on the surface of an epoxide group containing a silica gel phase for the synthesis of a newly functionalized material based on porous silica-bound bi-thiophene tripodal ligand (SGBT) is described. The modified silica surface was characterized by ¹³C NMR of a solid sample, elemental analysis, and infrared spectra. This new material was also studied and evaluated by determination of the surface area using the BET equation, the adsorption and desorption capability using the isotherm of nitrogen and BJH pore sizes, respectively. The target material exhibits good thermal stability as determined by thermogravimetry curves. The synthesized material was utilized in column and batch methods for adsorption of Hg²⁺, Cd²⁺, Pb²⁺, Cu²⁺, Zn²⁺, K⁺, Na⁺, and Li⁺, and the material exhibits an affinity only towards toxic heavy metals.     

Benzoaza-15-crown-5 ethers: synthesis,structure, and complex formation with metal and ethylammonium ions

Benzoaza-15-crown-5 ethers containing one or two nitrogen atoms in different positions of the macrocycle and bearing different substituents at these atoms were synthesized. The structures of azacrown ethers and their metal complexes were studied by X-ray diffraction. The stability constants of the complexes of azacrown ethers with Na⁺, Ca²⁺, Ba²⁺, Ag⁺, Pb²⁺, and EtNH₃ ⁺ ions were determined by ¹H NMR titration in MeCN-d₃. In free benzoazacrown ethers containing secondary nitrogen atoms bound to the benzene ring, as well as in N-acetyl derivatives, the N atoms are sp²-hybridized and have a planar geometry. The nitrogen lone pairs on the p orbitals are efficiently conjugated to the benzene ring or the carbonyl fragment of the acetyl group, which is unfavorable for the complex formation. In addition, the formation of complexes with benzoazacrown ethers containing secondary nitrogen atoms is hindered because the hydrogen atoms of the NH groups are directed to the center of the macrocyclic cavity. In benzoazacrown ethers bearing N-alkyl substituents or secondary nitrogen atoms distant from the benzene ring, the N atoms show a substantial contribution of the sp³-hybridized state and have a pronounced pyramidal configuration, which promotes the complex formation. The lead and calcium cations form the most stable complexes due to the high affinity of Pb²⁺ ions for O,N-containing ligands, a high charge density on these ions, and the better correspondence of the cavity size of the 15-membered macrocycles to the diameter of the Ca²⁺ ion. An increase in the stability of the complexes is observed mainly in going from monoazacrown ethers to diazacrown ethers containing identical substituents at the N atoms and in the following series of substituents: C(O)Me < H < Me < CH₂CO₂Et. In the case of the CH₂CO₂Et substituents, the carbonyl oxygen atom is also involved in the coordination to the cation. The characteristic features of the complexing ability of N-alkylbenzomonoaza-15-crown-5 ethers bearing the nitrogen atom conjugated to the benzene ring show that macro-cyclic ligands having this structure are promising as selective and efficient complexing agents for metal cations.     

An adsorption study of Sr2+ from saline sources by coconut shell charcoal

The adsorption potential of charcoal for the removal of heavy metal ions is well documented in the literature. However, its exploration for uptake of technologically valuable metal ions such as Sr²⁺ is poorly known. In this work, the batch adsorption study of Sr²⁺ ion from aqueous solution as well as from saline matrix (>3% of NaCl) onto charcoal has been carried out. The experiments were conducted with two charcoals, i.e., our prepared charcoal (coconut shell charcoal) and commercial charcoal. Strontium adsorption has been investigated as a function of its initial concentration, contact time, and varied mass of adsorbent. Equilibrium adsorption data were evaluated for Langmuir and Freundlich isotherm models. The adsorption capacities (mg/g) of Sr²⁺ present in the salt matrix onto coconut shell charcoal and commercial charcoal was found to be 18.4 and 22.2, respectively. Uptake of Sr²⁺ from subsoil brine onto coconut shell charcoal has been successfully demonstrated in this work.     

Simultaneous determination of mercury, lead and cadmium ions in water using near-infrared spectroscopy with preconcentration by thiol-functionalized magnesium phyllosilicate clay

Analysis of metal ions in environment is of great importance for evaluating the risk of heavy metal to public health and ecological safety. A method for simultaneous determination of metal ions in water samples was developed by using adsorption preconcentration and near-infrared diffuse reflectance spectroscopy (NIRDRS). A high capacity adsorbent of thiol-functionalized magnesium phyllosilicate, named Mg-MTMS, was prepared by co-condensation for preconcentration of Hg²⁺, Pb²⁺ and Cd²⁺ in aqueous solutions. After adsorbing the analytes onto the adsorbent, NIRDRS was measured and PLS models were established for fast and simultaneous quantitative prediction. Because the interaction of the ions with the functional group of the adsorbent can be reflected in the spectra, the models built with the samples prepared by river water were proven to be efficient enough for precise prediction. The determination coefficients (R²) of the validation samples for the three ions were found as high as 0.9197, 0.9599 and 0.9861, respectively. Furthermore, because the high adsorption efficiency of Mg-MTMS, the detected concentrations are as low as milligrams per liter for the three ions, and the concentration can be further reduced. Therefore, the feasibility of quantitative analysis metal ions in river water by NIRDRS is proven and this may provide a new way for fast simultaneous determination of trace metals in environmental waters.     

Electrochemical Investigation of Binding of Heavy Metal Ions to Turkish Lignites

Adsorption and desorption of Cu²⁺, Pb²⁺, Cd²⁺, Ni²⁺ and Zn²⁺ ions on samples of lignites (young brown coal) from three areas in the vicinity of Konya (Anatolia, Turkey) were followed using the polarographic method of analysis. This method enables the determination of free metal ions in suspensions containing both small and colloidal particles of lignite. Effects of pH, nature of the metal ion, and origin of the lignite on its adsorption capacity were followed. Binding is only between 5 and 30% reversible, indicating that ion exchange is not the predominant factor. The role of the size and shape of cavities inside pulverized lignite and of the functional groups inside these cavities was considered.     

Synthesis and applications of poly(acryl<Emphasis Type="Italic">p</Emphasis>-aminobenzenesulfonamideamidine-<Emphasis Type="Italic">p</Emphasis>-aminobenzenesulfonylamide) chelating fiber for pre-concentrating and separating trace Bi(III), Hg(III), Au(III) and Pd(IV) from solution samples

Poly(acrylp-aminobenzenesulfonamideamidine-p-aminobenzenesulfonylamide) chelating fiber containing "S", "N", and "O" elements was synthesized from polyacrylonitrile fiber and p-aminobenzene sulfonamide and used to enrich and separate trace Bi(III), Hg(III), Au(III), and Pd(IV) ions from wastewater and ore sample solution. The enrichment acidity, flow rate, elution conditions, reuse, interference ions, saturated adsorption capacity, constant of adsorption rate, analytical accuracy, and actual samples on chelating fiber were investigated by means of inductively coupled plasma optical emission spectrometry (ICP-OES) with satisfactory results. Solutions of 100 ng mL^–1 of Bi(III), Hg(III), Au(III), and Pd(IV) ions can be enriched quantitatively by this chelating fiber at a rate of 1.0 mL min^–1 at pH 4 and desorbed quantitatively with 20 mL of 0.25 M HCl and 2% CS(NH₂)₂ solution at 50 °C (with recovery 97%). When the chelating fiber was reused for 20 times, the recoveries of the analyzed ions enriched by the fiber were still over 95% (except for Hg(III)). One thousand-fold excesses of Mn²⁺, Ca²⁺, Zn²⁺, Mg²⁺, Fe³⁺, Cu²⁺, Ni²⁺, Al³⁺, and Ba²⁺ ions and thousands-fold excesses of Na⁺ and K⁺ cause little interference in the pre-concentration and determination of the analyzed ions. The saturated adsorption capacity of Bi(III), Hg(III), Au(III), and Pd(IV) was 4.850×10^–4, 3.235×10^–4, 2.807×10^–4, and 3.386×10^–4 mol g^–1, respectively. The constants of adsorption rate were 0.409 min^–1 for Bi, 0.122 min^–1 for Hg, 0.039 min^–1 for Au, and 0.080 min^–1 for Pd. The relative standard deviations (RSDs) for the enrichment and determination of 10 ng mL^–1 Bi(III), Hg(III), Au(III), and Pd(IV) were lower than 2.3%. The results obtained for these ions in actual samples by this method were basically in agreement with the given values with average errors of less than 1.0%. FT-IR spectra shows that the existence of –SO₂–Ar, –H₂N–Ar, O=C–NH–, HN=C–NH–, and –HN–SO₂ functional groups are verified in the chelating fiber. From the FT-IR spectroscopy, we can see that Hg(III), Au(III), and Pd(IV) are mainly combined with nitrogen and sulfur (or oxygen), and Bi(III) is mainly combined with nitrogen (or oxygen) of the groups to form a chelating complex.     

Biosorption of metal ions with Penicillium chrysogenum

Biosorption of metal ions with Penicillium chrysogenum mycelium is described in this article. Alkaline pretreatment was used to remove proteins and nucleic acids from cells, and this treatment increased the adsorption capacities, for Cr³⁺ from 18.6 mg g⁻¹ to 27.2 mg g⁻¹, for Ni²⁺ from 13.2 mg g⁻¹ to 19.2 mg g⁻¹, for Zn²⁺ from 6.8 mg g⁻¹ to 24.5 mg g⁻¹. The adsorption of metal ions was strongly pH dependent. The mycelium could beused for large-scale removal of Cr³⁺ from tannery wastewater. The results show that this inexpensive mycelium adsorbent has potential in industry because of its high adsorption capacity. The main chelating sites are amino groups (−NH₂) of chitosan in the mycelium. A new model is established, which describes the relation of adsorption of metal ions on pH according to amino group chelating with metal ions and H⁺. The relative errors of simulation for Cu²⁺, Ni²⁺, Zn²⁺, and Cr³⁺ are 4.66%, 5.45%, 11.55%, and 1.69%, respectively.     

Synthesis of anionic gemini surfactant-templated mesoporous silica nanoparticles and its adsorption application for Pb2+

Abstract

Amino-functionalized mesoporous silica nanoparticles (AFMSN) were prepared based on the self-assembly process of the pre-fabricated template of anionic gemini surfactant. The perfect mass ration of the reactants for the synthesis of the AFMSN with high surface area and amino loading was optimized by orthogonal experiments. Adsorption capability of the optimized product for lead ion (Pb²⁺) was investigated in detail. Specially, the effects of the amino content, solution pH, adsorbent dosage, temperature, and interference of other metal ions on the removal efficiency of Pb²⁺ were studied. It is found that these factors can greatly affect the removal efficiency of Pb²⁺ and the prepared adsorbent exhibits the high adsorption selectivity for Pb²⁺. At an optimal condition, the AFMSN adsorbent presents an excellent adsorption capacity for Pb²⁺ up to 211.42?mg/g. The adsorption kinetics study revealed that the pseudo-second-order model could well describe the Pb²⁺ adsorption process, and the adsorption isotherm was fitted well with the Langmuir model. More importantly, the AFMSN adsorbent could be recycled 8 times and a high adsorption efficiency of Pb²⁺ could still be maintained. Therefore, the prepared AFMSN adsorbent may find practical application in removing Pb²⁺ from the polluted water.     

A novel magnetic biosorbent prepared using an oak shell waste material as an efficient adsorbent for consecutive removal of Pb2+, Ag+, Ba2+, Sr2+, and CrO42− from aqueous solutions

In this research, the performance of a new biosorbent prepared using low-cost oak shell waste materials for consecutive removal of particular cations and chromate anions from aqueous solutions was studied. The adsorbent impregnated with Pb²⁺, Ag⁺, Ba²⁺, and Sr²⁺ was used to remove chromate anions by the formation of an appropriate insoluble precipitate. The biosorbent was characterized by FTIR, XRD, SEM, TG-DTG, and VSM techniques. The adsorption capacities of 133.84, 53.12, 50.12, and 40.39 mg g^?1 were obtained for chromate for the samples containing Pb²⁺, Ag⁺, Ba²⁺, and Sr²⁺ cations, respectively. The chromate uptake was inversely proportional to the k_sp of the chromate precipitate and increased with the cation content of the adsorbent. The adsorption process was kinetically fast and the equilibrium was established within 10 min. The experimental data were analyzed by the Langmuir, Freundlich, Sips, and Redlich-Peterson isotherm models. The data were fitted to the Langmuir isotherm, indicating that chromate was adsorbed homogeneously on the adsorbent surface.     

Adsorption of UO2 2+, Tl+, Pb2+, Ra2+ and Ac3+ onto polyacrylamide-bentonite composite

Composite of polyacrylamide-bentonite (PAA-B) was prepared by direct polymerization in a suspension of bentonite (B), the composite was then modified by phytic acid (PAA-B-Phy). The parameters related to adsorption of UO₂ ²⁺ in absence and presence of 0.01M CaCl₂ and of natural radionuclides (Tl⁺, Pb²⁺, Ra²⁺ and Ac³⁺ in a leaching solution) onto PAA-B and PAA-B-Phy, and thermodynamics of the adsorption were investigated. Adsorption isotherms were of L and H types for the adsorption of UO₂ ²⁺ onto PAA-B and PAA-B-Phy, whilst for Tl⁺, Pb²⁺, Ra²⁺ and Ac³⁺ they were of C type for both adsorbents. Langmuir equilibrium constants for the adsorption of all studied ions onto PAA-B-Phy were significantly higher than those found for PAA-B. The thermodynamic parameters indicated that adsorption reactions are spontaneous in terms of adsorption free enthalpy. The composite of PAA-B and its modification by Phy have been used for the first time in this study. It is concluded that the composites can be practically used for adsorption and applied as adsorbent of radionuclides.