An Efficient One‐Pot,Four‐Component Synthesis of {[(1H‐1,2,3‐Triazol‐4‐yl)methoxy]phenyl}‐1H‐pyrazolo[1,2‐b]phthalazine‐5,10‐dione Derivatives

The 1‐{[(1H‐1,2,3‐Triazol‐4‐yl)methoxy]phenyl}‐1H‐pyrazolo[1,2‐b]phthalazine‐5,10‐dione derivatives 5 were synthesized by a simple and efficient method, i.e., by the four‐component, one‐pot condensation reaction of phthalohydrazide 4 , a (propargyloxy)benzaldehyde 1 , an active methylene compound 3 (malononitrile or ethyl cyanoacetate), and an azide 2 in the presence of Cu(OAc)₂/sodium L ‐ascorbate as catalyst and 1‐methyl‐1H‐imidazolium trifluoroacetate ([Hmim](CF₃COO)) as an ionic‐liquid medium in good to excellent yields (Scheme 1).     

A Facile Synthesis of Novel (Z)‐ethyl‐3‐(5‐substituted‐1‐alkyl/aryl‐1H‐indol‐3‐yl)‐2‐(1H‐tetrazol‐5‐yl)acrylate

A novel route was developed for synthesis of high potential 1H‐tetrazoles by using conventional method. Tetrazole scaffold is a promising pharmacophore fragment, frequently used in the development of various novel drugs. Here, the novel (Z)‐3‐(N‐alkyl‐indol‐3‐yl)‐2‐(1H‐tetrazole‐5‐yl)acrylates 5 ( a – i ) have been synthesized from (Z)‐ethyl‐3‐(1H‐indol‐3‐yl)2‐(1H‐tetrazol‐5‐yl)acrylates 4 ( a – c ) by using various alkylating agents such as Dimethyl Sulphate (DMS), Diethyl Sulphate (DES), and benzyl chloride; 4 ( a – c ) were synthesized from sodium azide in the presence of copper sulfate in dimethylformamide; 3 ( a – c ) have been prepared by Knoevenagel condensation of indole‐3‐carbaldehyde 1 ( a – c ) and ethylcyanoacetate 2 in the presence of L‐Proline as a catalyst at room temperature in ethanol for an hour. This is an efficient and clean click chemistry method that has various advantages such as easy workup, higher yields, shorter reaction times, and more economical.     

An Efficient Synthesis of N‐Substituted‐3‐aryl‐3‐(4‐hydroxy‐6‐methyl‐2‐oxo‐2H‐pyran‐3‐yl)propanamides by Four‐Component Reaction in Aqueous Medium

A mild and efficient synthesis of N‐substituted‐3‐aryl‐3‐(4‐hydroxy‐6‐methyl‐2‐oxo‐2H‐pyran‐3‐yl)propanamides via four‐component reaction of an aldehyde, amine, Meldrum's acid, and 4‐hydroxy‐6‐methyl‐2H‐pyran‐2‐one in the presence of benzyltriethylammonium chloride (TEBAC) in aqueous medium is described. This method has the advantages of accessible starting materials, good yields, mild reaction conditions, and begin environmentally friendly.     

An Efficient One‐pot Three‐component Method for the Synthesis of 5‐Amino‐3‐(2‐oxo‐2H‐chromen‐3‐yl)‐7‐aryl‐7H‐thiazolo[3,2‐a]pyridine‐6,8‐dicarbonitriles

A facile, convenient, and adequate method has been developed for the synthesis of novel 5‐amino‐3‐(2‐oxo‐2H‐chromen‐3‐yl)‐7‐aryl‐7H‐thiazolo[3,2‐a]pyridine‐6,8‐dicarbonitriles ( 6 ) by employing 2‐(4‐(2‐oxo‐2H‐chromen‐3‐yl)thiazol‐2‐yl)acetonitrile ( 3 ) as an important precursor. Initially, we have synthesized the target compounds in a stepwise manner and then approached a tandem method to examine the feasibility of one‐pot method. Subsequently, one‐pot three‐component protocol has been established for the synthesis of title compounds by the reaction of 3 with benzaldehyde and malononitrile in refluxing ethanol engender a new six‐membered thiazolo[3,2‐a] pyridine as a hybrid scaffold. Reaction conditions were optimized for this reaction and a broad substrate scope with various aryl and heteroaryl aldehydes make this protocol very practical, attractive, and worthy. Mechanistic aspects for the formation of these compounds were outlined comprehensively. Characterization of these newly synthesized compounds was achieved by means of IR, ¹H NMR, ¹³C NMR, and HRMS.     

An Efficient and Facile Synthesis of tert‐Butyl 2‐(Methylamino)‐3‐nitro‐5‐oxo‐4‐aryl‐7,8‐dihydro‐4H‐pyrano[3,2‐c]pyridine‐6(5H)‐carboxylate derivatives in [BMIM]BF4

In this research, we have developed an efficient three‐component reaction for the synthesis of pyrano[3,2‐c]pyridine derivatives from the reaction of aromatic aldehydes, tert‐butyl 2,4‐dioxopiperidine‐1‐carboxylate, and N‐methyl‐1‐(methylthio)‐2‐nitroethylen‐1‐amine in [BMIM]BF₄ medium. The advantages of this method were readily available starting materials, simple reaction conditions, and satisfactory yields.     

A Mild Approach to the Synthesis of sn‐Glycerol 1,2‐Di‐γ‐linolenate 3‐Palmitate

A synthetic approach comprising several studied modifications was applied to the preparation of sn‐glycerol 1,2‐di‐γ‐linolenate 3‐palmitate ( 4 ). Thereby, a convenient and mild synthetic method was elaborated, affording 4 from 1,2‐O‐isopropylidene‐sn‐glycerol ( 1 ) in an average yield of 65 – 75% and analytically acceptable purity.     

Microwave‐Assisted Three‐Component Synthesis of Some Novel 1‐Alkyl‐1H‐indole‐2,3‐dione 3‐(O‐Alkyl­oxime) Derivatives as Potential Chemotherapeutic Agents

A convenient and efficient method for a one‐pot conversion of N‐alkylisatins to N‐alkylisatin O‐alkyloximes 7a – 7n as potential chemotherapeutic agents is described (Scheme) (isatin=1H‐indole‐2,3‐dione). In this method, the microwave‐assisted three‐component reaction of N‐alkylisatins 8 , hydroxylamine hydrochloride, and diverse alkyl halides in the presence of K₂CO₃ and Bu₄NBr furnishes the corresponding N‐alkylisatin O‐alkyloximes under solvent‐free condition in short times (2–10 min) and good to excellent yields (62–83%). The O‐alkylation of in situ generated isatin oximes with alkyl halides was achieved regioselectively, and (Z)‐O‐alkyloximes were produced dominantly. PM3 Semi‐empirical quantum‐mechanic calculations were performed to rationalize the evidences, and the calculations indicated a lower heat of formation for the (Z)‐O‐alkyloximes.     

Synthesis of Ethyl 2‐Amino‐4‐benzoyl‐5‐oxo‐5,6‐dihydro‐4H‐pyrano[3,2‐c]quinoline‐3‐carboxylates by a One‐pot,Three‐Component Reaction in the Presence of TPAB

In this research, in order to synthesize a series of ethyl 2‐amino‐4‐benzoyl‐5‐oxo‐5,6‐dihydro‐4H‐pyrano[3,2‐c]quinoline‐3‐carboxylates, a green and an efficient method is proposed through one‐pot three‐component reaction of substituted arylglyoxals, ethyl cyanoacetate, and 4‐hydroxyquinolin‐2(1H)‐one in the presence of terapropylammonium bromide as a catalyst in good yields. All synthesized new substances were characterized by FTIR, ¹H‐NMR, and ¹³C‐NMR spectral data and elemental analysis.     

Synthesis of 2‐Aryl‐2,3‐dihydro‐1,8‐naphthyridin‐4(1H)‐ones by Deprotective Cyclization of N‐{3‐[(2E)‐3‐Arylprop‐2‐enoyl]pyridin‐2‐yl}‐2,2‐dimethylpropanamides in Water

A new and convenient method for the preparation of 2‐aryl‐2,3‐dihydro‐1,8‐naphthyridin‐4(1H)‐ones 4 has been developed. Thus, N‐{3‐[(2E)‐3‐arylprop‐2‐enoyl]pyridin‐2‐yl}‐2,2‐dimethylpropanamides 3 are synthesized from commercially available pyridin‐2‐amine using an easily performed three‐step sequence and are subjected to cyclization with deprotection under acidic conditions in H₂O to give the desired products. Similarly, 2‐aryl‐2,3‐dihydro‐1,7‐naphthyridin‐4(1H)‐ones 8 and 2‐aryl‐2,3‐dihydro‐1,6‐naphthyridin‐4(1H)‐ones 12 can be prepared from pyridin‐3‐amine and pyridin‐4‐amine, respectively.     

Conformational study of the 3,6‐dihydro‐2H‐1,4‐oxazin‐2‐one fragment in 8‐tert‐butyl‐7‐methoxy‐8‐methyl‐9‐oxa‐6‐azaspiro[4.5]decane‐2,10‐dione stereoisomers

Unnatural cyclic α‐amino acids play an important role in the search for biologically active compounds and macromolecules. Enantiomers of natural amino acids with a d configuration are not naturally encoded, but can be chemically synthesized. The crystal structures of two enantiomers obtained by a method of stereoselective synthesis, namely (5R ,8S )‐8‐tert‐butyl‐7‐methoxy‐8‐methyl‐9‐oxa‐6‐azaspiro[4.5]decane‐2,10‐dione, (1), and (5S ,8R )‐8‐tert‐butyl‐7‐methoxy‐8‐methyl‐9‐oxa‐6‐azaspiro[4.5]decane‐2,10‐dione, (2), both C₁₄H₂₁NO₄, were determined by X‐ray diffraction. Both enantiomers crystallize isostructurally in the space group P 2₁, with one molecule in the asymmetric unit and with the same packing motif. The crystal structures are stabilized by C—H…O hydrogen bonds, resulting in the formation of chains along the [100] and [010] directions. The conformation of the 3,6‐dihydro‐2H‐1,4‐oxazin‐2‐one fragment was compared with other crystal structures possessing this heterocyclic moiety. The comparison showed that the title compounds are not exceptional among structures containing the 3,6‐dihydro‐2H‐1,4‐oxazin‐2‐one fragment. The planar moiety was more frequently observed in derivatives in which this fragment was not condensed with other rings.     

A Green Synthesis of 2‐Amino‐4‐(9H‐carbazole‐3‐yl)thiophene‐3‐carbonitriles by a Step‐wise and One‐pot Three‐component Gewald Reaction

An eco‐friendly method has been developed for the synthesis of 2‐amino‐4‐(9H‐carbazole‐3‐yl)thiophene‐3‐carbonitriles from preliminary carbazole ( 1 ) through an intermediate of 2‐(1‐(9H‐carbazole‐3‐yl)ethylidene)malononitriles using the Knoevenagel condensation followed by the Gewald reaction. On the other hand, the target compounds could also be prepared in a one‐pot three‐component manner by treating equimolar quantities of 1‐(9H‐carbazole‐3‐yl)ethanone ( 3 ), malononitrile, and elemental sulfur. The merits of this preparation are mild reaction conditions. The Gewald reaction is executed with inorganic base NaHCO₃ (H₂O) in tetrahydrofuran, easy work‐up procedure with good yields.     

Synthesis of 2‐Aryl‐2,3‐dihydro‐3‐sulfanyl‐1H‐isoindol‐1‐ones by Pummerer‐Type Cyclization of N‐Aryl‐2‐(sulfinylmethyl)benzamides

An efficient method for the synthesis of 2‐aryl‐2,3‐dihydro‐3‐sulfanyl‐1H‐isoindol‐1‐ones 1 via Pummerer‐type cyclization of N‐aryl‐2‐(sulfinylmethyl)benzamides 2 is described. Thus, treatment of these sulfinyl‐benzamides 2 , easily prepared from 2‐(bromomethyl)benzoates 3 in three steps, with Ac₂O at ca. 100° resulted in the formation of the desired isoindolones 1 in generally good yields.     

Highly Convergent One‐Pot Four‐Component Regioselective Synthesis of Spiro‐pyranopyrazoles and Oxa‐aza‐[3.3.3]propellanes

A concise and efficient route for the synthesis of spiro‐pyranopyrazoles and oxa‐aza‐[3.3.3]propellanes by simple regioselective multicomponent reaction of ninhydrin, malononitrile, hydrazine derivatives, and β‐keto esters or dimethyl acetylenedicarboxylate was developed. This protocol provides an alternative method for combinatorial and parallel syntheses in drug discovery. The value of this method lies in its simplicity, regioselectivity, and good yields. The structures of 3 and 4 were corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS). A plausible mechanism for this type of reaction is proposed (Schemes 2 and 3).     

Construction of hole‐transported MoO3‐x coupled with CdS nanospheres for boosting photocatalytic performance via oxygen‐defects‐mediated Z‐scheme charge transfer

The establishment of Z‐scheme charge transfer between semiconductors is an effective method to improve the performance of hybridized semiconductor photocatalysts. Herein, the novel photocatalysts consisting of MoO_3‐x and varying amounts of cadmium sulfide (CdS) nanospheres were successfully prepared via the one‐pot hydrothermal method in the presence of polyvinylpyrrolidone (PVP). It is indicated that the PVP not only served as the reducing agent for the formation of oxygen defects in MoO_3‐x, but also the cross‐linking agent for the coupling between MoO_3‐x and CdS. The CdS/MoO_3‐x composite allowed for higher visible‐light photocatalytic performance for enhanced removal of methylene blue and tetracycline with an efficiency of 97.6% and 85.5%, respectively. The improved performance of the CdS/MoO_3‐x composite was found to be mainly attributable to the remarkable charge carrier separation and transfer between CdS and MoO_3‐x based on the favorable hole‐transporting nature and oxygen deficiencies of MoO_3‐x. In addition, the hole‐oxidized photocorrosion of CdS was efficiently suppressed due to the presence of hole‐attractive MoO_3‐x. At the solid interface, an oxygen‐defects‐mediated Z‐scheme charge carrier transfer pathway was proposed as the underlying mechanism for the superior photocatalytic reaction.     

Effective Synthesis of N‐Arylformamide from α‐Halo‐N‐arylacetamides

A convenient synthetic method for N‐arylformamide derivatives was successfully developed by reacting α‐iodo‐N‐arylacetamides with formamide. This method was applicable to α‐iodo‐N‐arylacetamide substrates bearing electron‐donating or electron‐withdrawing groups, N‐(benzo[d][1,3]dioxol‐5‐yl)‐2‐iodoacetamide, 2‐iodo‐N‐(pyridin‐2‐yl)acetamide, and 2‐iodo‐N‐(naphthalen‐4‐yl)acetamide to give the corresponding N‐arylformamides in moderate to excellent yields (65–94%). A plausible mechanism was proposed to account for the new transformation.     

Efficient Synthesis of 2,3‐Disubstituted‐1,3‐benzoxazines by Chlorotrimethylsilane‐Mediated Aza‐Acetalizations of Aromatic Aldehydes

A series of novel substituted 3,4‐dihydro‐2H‐1,3‐benzoxazines were prepared in moderate to good yields by aza‐acetalizations of aromatic aldehydes with 2‐(N‐substituted aminomethyl)phenols in the presence of chlorotrimethylsilane or SnCl₄. It was found that chlorotrimethylsilane was more effective for the reaction, especially for the reaction of fluorobenzaldehyde, and thereby, an efficient method for the preparation of 3,4‐dihydro‐2H‐1,3‐benzoxazines was developed. The structures of the compounds were determined by FT‐IR, ¹H NMR, ¹³C NMR, MS, and elemental analysis.     

One‐pot Synthesis of 3,4‐Dihydropyrimidin‐2(1H)‐ones Catalysed by Cupric Acetate under Solvent‐free Conditions

A solvent‐free synthesis of 3,4‐dihydropyrimidin‐2(1H)‐ones from aromatic aldehydes, β‐keto ester/acetyl acetone and urea catalysed by cupric acetate under thermal condition is reported as a simple and an efficient protocol. Compared with classical Biginelli reaction reported in 1893, this new method provides much improved modification in terms of yield and reaction time. The usage of milder catalyst, environmental friendly procedures and excellent yields within a very short time (5–15 min) are the advantages of the method in which the involvement of solvent‐free condition adds an edge to the method. Thus, the efficiency of the protocol enabled the rapid synthesis of 3,4‐dihydropyrimidin‐2(1H)‐one derivatives in a short duration.     

Synthesis of 1R‐1H‐Imidazo[1,2‐a]pyridin‐4‐ium‐8‐olate Derivatives

A new method based on reaction of 4‐bromobut‐2‐enoates with N‐alkylimidazoles was proposed for obtaining 1R‐1H‐imidazo[1,2‐a]pyridin‐4‐ium‐8‐olate and 1‐R‐8‐methoxy‐1H‐imidazo[1,2‐a]pyridin‐4‐ium derivatives. The structures of synthesized compounds were confirmed by ¹H, ¹³C NMR, elemental analysis, and X‐ray data.     

Application of a LC–MS/MS method developed for the determination of p‐phenylenediamine,N‐acetyl‐p‐phenylenediamine and N,N‐diacetyl‐p‐phenylenediamine in human urine specimens

Cases of poisoning by p‐phenylenediamine (PPD) are detected sporadically. Recently an article on the development and validation of an LC–MS/MS method for the detection of PPD and its metabolites, N‐acetyl‐p‐phenylenediamine (MAPPD) and N,N‐diacetyl‐p‐phenylenediamine (DAPPD) in blood was published. In the current study this method for detection of these compounds was validated and applied to urine samples. The analytes were extracted from urine samples with methylene chloride and ammonium hydroxide as alkaline medium. Detection was performed by LC–MS/MS using electrospray positive ionization under multiple reaction‐monitoring mode. Calibration curves were linear in the range 5–2000 ng/mL for all analytes. Intra‐ and inter‐assay imprecisions were within 1.58–9.52 and 5.43–9.45%, respectively, for PPD, MAPPD and DAPPD. Inter‐assay accuracies were within ?7.43 and 7.36 for all compounds. The lower limit of quantification was 5 ng/mL for all analytes. The method, which complies with the validation criteria, was successfully applied to the analysis of PPD, MAPPD and DAPPD in human urine samples collected from clinical and postmortem cases.     

One‐Pot Syntheses of 2‐(2‐Sulfanyl‐4H‐3,1‐benzothiazin‐4‐yl)acetic Acid Derivatives via Reactions of 3‐(2‐Isothiocyanatophenyl)prop‐2‐enoic Acid Derivatives with Thiols or Sodium Sulfide

Two efficient methods for the preparation of 2‐(2‐sulfanyl‐4H‐3,1‐benzothiazin‐4‐yl)acetic acid derivatives 3 under mild conditions have been developed. The first method is based on the reaction of 3‐(2‐isothiocyanatophenyl)prop‐2‐enoates 1a – 1c with thiols in the presence of Et₃N in THF at room temperature, leading to the corresponding dithiocarbamate intermediates 2 , which underwent spontaneous cyclization at the same temperature by an attack of the S‐atom at the prop‐2‐enoyl moiety in a 1,4‐addition manner (Michael addition) to give 2‐(2‐sulfanyl‐4H‐3,1‐benzothiazin‐4‐yl)acetates in one pot. The second method involves treatment of 3‐(2‐isothiocyanatophenyl)prop‐2‐enoic acid derivatives 1b – 1d with Na₂S leading to the formation of 2‐(2‐sodiosulfanyl‐4H‐3,1‐benzothiazin‐4‐yl)acetic acid intermediates 5 by a similar addition/cyclization sequence, which are then allowed to react with alkyl or aryl halides to afford derivatives 3 . 2‐(2‐Thioxo‐4H‐3,1‐benzothiazin‐4‐yl)acetic acid derivatives 6 can be obtained by omitting the addition of halides.