Preparation,characterization and copolymerization of the 12‐membered cyclic diamide 1,6‐diazacyclododecane‐2,5‐dione

A 12‐membered cyclic diamide monomer for nylon 64 was successfully synthesized in fairly high yield (～45%). The synthesis conditions were varied to see the effect of the diamine and succinyl chloride reactants on yield. Threefold excess of 1,6‐hexamethylenediamine (HDA) gave the highest yield, while further increasing the amount of HDA decreased the yield. Using N,N‐diisopropylethylamine as acid scavenger resulted in the formation of two different cyclic amides, which were fully analyzed by ¹H and ¹³C solution nuclear magnetic resonance spectrometry and mass spectrometry. Copolymerization of cyclic amides with ε‐caprolactam via an anionic route gave a block copolyamide with a two distinct endotherms in the differential scanning calorimetry analysis. However, copolymerization by the hydrolytic route gave only nylon 6 with terminal 64 units. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 96–103     

Formation of cyclic acylphosphoramidates in mass spectra of N‐monoalkyloxyphosphoryl amino acids using electrospray ionization tandem mass spectrometry

The fragmentation reactions of N‐monoalkyloxyphosphoryl amino acids (N‐MAP‐AAs) were studied by electrospray ionization tandem mass spectrometry (ESI‐MS). The sodiated cyclic acylphosphoramidates (CAPAs) were formed through a characteristic pentacoordinate phosphate participated rearrangement reaction in the positive‐ion ESI‐MS/MS and HR‐MS/MS of N‐MAP‐AAs, in which the fragmentation patterns were clearly different from those observed in the corresponding ESI‐MS/MS of N‐dialkyloxyphosphoryl amino acids/peptides and N‐phosphono amino acids. The formation of CAPAs depended on the chemical structures of N‐terminal phosphoryl groups, such as alkyloxy group, negative charge and alkali metal ion. A possible integrated rearrangement mechanism for both P‐N to P‐O phosphoryl group migration and formation of CAPAs was proposed. The fragmentation patterns of CAPAs as novel intermediates in gas phase were also investigated. In addition, it was found that the formation of α‐amino acid CAPAs was more favorable than β‐ or γ‐CAPAs in gas phase, which was consistent with previous solution‐phase experiments. Copyright © 2010 John Wiley & Sons, Ltd.     

A versatile method for cyclic polymers from conjugated and unconjugated vinyl monomers

A versatile method was introduced to prepare cyclic polymers from both conjugated and unconjugated vinyl monomers. It was developed on the combination of the RAFT polymerization and the self‐accelerating double strain‐promoted azide‐alkyne click (DSPAAC) reaction. In this approach, a switchable chain transfer agent 1 was designed to have hydroxyl terminals and a functional pyridinyl group. The protonation and deprotonation of pyridinyl group endowed the chain transfer agent 1 with a switchable control capability to RAFT polymerization of both conjugated and unconjugated vinyl monomers. Based on this, RAFT polymerization and the following hydroxyl end group modification were used to prepare various azide‐terminated linear polymers including polystyrene, poly(N‐vinylcarbazole), and polystyrene‐block‐poly(N‐vinylcarbazole). Using sym‐dibenzo‐1,5‐cyclooctadiene‐3,7‐diyne (DBA) as small linkers, the corresponding cyclic polymers were then prepared via the DSPAAC reaction between DBA and azide terminals of the linear precursors. Due to the self‐accelerating property of DSPAAC reaction, this bimolecular ring‐closing reaction could efficiently produce the pure cyclic polymers using excess molar amounts of DBA to linear polymer precursors. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 1811–1820     

Anionic ring‐opening polymerization of a five‐membered cyclic urethane derived from d‐glucosamine

The anionic ring‐opening polymerization of a five‐membered cyclic urethane, 2‐amino‐4,6‐O‐benzylidene‐2‐N,3‐O‐carbonyl‐2‐deoxy‐α,d ‐glucopyranoside (MBUG), which was prepared from naturally abundant d ‐glucosamine, was examined. Potassium tert‐butoxide (t‐BuOK) was the most effective initiator among the evaluated bases and produced polyurethane with the Mn of 7800 without any elimination of CO₂. The equimolar reaction of MBUG and t‐BuOK in the presence of CH₃I produced N‐methylated MBUG and suggested that the initiation reaction involves proton abstraction from the NH group. This N‐methylated compound did not undergo the polymerization. Therefore, the mechanism of propagation in the ROP of MBUG should involve the proton abstraction and nucleophilic substitution of the resulting amide anion. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2491–2497     

Polymer‐supported pyridinium catalysts for synthesis of cyclic carbonate by reaction of carbon dioxide and oxirane

Polymer‐supported pyridinium salts, prepared by quaternarization of crosslinked poly(4‐vinylpyridine) with alkyl halides, effectively catalyze the reaction of carbon dioxide (1 atm) and glycidyl phenyl ether (GPE) to afford the corresponding five‐membered cyclic carbonate (4‐phenoxymethyl‐1,3‐dioxolan‐2‐one). Poly(4‐vinylpyridine) quarternarized with alkyl bromides show high catalytic activities, and the reaction of carbon dioxide (1 atm) and GPE at 100 °C affords 4‐phenoxymethyl‐1,3‐dioxolan‐2‐one quantitatively in 6 h. The rate constant in the reaction of GPE and carbon dioxide in N‐methyl pyrrolidinone using poly(4‐vinylpyridine) quarternarized with n‐butyl bromide (k_obs = 102 min^?1) is almost comparable with those for homogeneous catalysts with good activities (e.g., LiI), and the rate of the reaction obeys the first‐order kinetics. A used catalyst may be recovered by centrifugation, and the recycled catalyst also promotes the reaction of GPE and carbon dioxide. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5673–5678, 2007     

Two enantiomerically pure cyclic arenesulfonamide hydrochloride salts

The crystal structures of N‐[(1R)‐1‐(1‐naphthyl)ethyl]‐3,4‐dihydro‐2H‐1,2‐benzothiazin‐4‐aminium 1,1‐dioxide chloride, C₂₀H₂₁N₂O₂S⁺·Cl⁻, (I), a six‐membered cyclic sulfonamide, and (1R)‐N‐[(5,5‐dioxo‐6,7‐dihydrodibenzo[d,f][1,2]thiazepin‐7‐yl)methyl]‐1‐(1‐naphthyl)ethanaminium chloride, C₂₆H₂₅N₂O₂S⁺·Cl⁻, (II), a seven‐membered cyclic sulfonamide, both representative of a novel family of agonists of the extracellular calcium sensing receptor (CaSR) of possible clinical importance, are reported. The known chirality of the naphthylethylamine precursor has enabled assignment of the absolute configuration of both compounds, which is crucial for the receptor recognition. The crystal structures, though different, reveal for these agonists a notable absence of intramolecular π–π stacking between their respective aromatic groups. This suggests a common structural feature that allows CaSR agonists to be distinguished from antagonists, since in the latter, such interactions have been shown to be important. The connectivities between molecules in the crystal structures are also different, but both involve hydrogen bonding mediated by chloride ions as a common dominant feature.     

Magnesium Halide‐promoted Ring‐opening Reaction of Cyclic Ether in the Presence of Phosphine Halide

A new route to the direct preparation of H‐phosphinate esters has been explored. The ring‐opening reaction of cyclic ether (tetrahydrofuran or tetrahydropyrane) was carried out with magnesium halide in the presence of phosphine halide (PRCl₂ or PCl₃). The process is straightforward and all the reagents are relatively cheap and readily available. Magnesium halide‐mediated THF ring‐opening (S_N2@C) and the subsequent S_N2@P elementary reactions that giving rise to the intermediate of haloalkyl phosphinates have been discussed based on our experimental findings ( Path I : S_N2@C−+S_N2@P). Another possible route, the direct S_N2 between THF (nucleophile) and phosphine halide (electrophile) that followed by THF ring opening by halide dissociated from phosphine halide ( Path II: S_N2@P−+S_N2@C), was also proposed. However, path II is the least likely reaction path because neutral THF is not a good nucleophile. H‐phosphinate esters could be readily available in the subsequent hydrolysis process. Considering the ionic bond strength in magnesium halides and the nucleophilicity of halides dissociated from MgX₂ in protic solvents like water, MgBr₂ is recommended for ring‐opening reactions of cyclic ethers.     

Synthesis and characterization of novel poly(ester‐carbonate)s by copolymerization of trans‐4‐hydroxy‐L‐proline with cyclic carbonate

The melt ring‐opening/condensation reaction of trans‐4‐hydroxy‐N‐benzyloxycarbonyl‐L‐proline (N‐CBz‐Hpr) with cyclic carbonate [trimethylene carbonate (tri‐MC) or tetramethylene carbonate (tetra‐MC)] at a wide range of molar fractions in the feed produced new degradable poly(ester‐carbonate)s. The influence of reaction conditions such as polymerization time and temperature on the yield and inherent viscosity of the copolymers was investigated. The polymerizations were carried out in bulk at 140 °C with 1.5 wt % stannous octoate as a catalyst for 30 h. The poly(ester‐carbonate)s obtained were characterized by Fourier transform infrared spectroscopy, ¹H NMR, differential scanning calorimetry, gel permeation chromatography, and Ubbelohde viscometry. The copolymers synthesized exhibited moderate molecular weights with rather narrow molecular weight distributions. The values of the glass‐transition temperature (T_g) of the copolymers depend on the molar fractions of cyclic carbonate. For the poly(N‐CBz‐Hpr‐co‐tri‐MC) system, with a decreased tri‐MC content from 93 to 16 mol %, the T_g increased from ?10 to 60 °C. Similarly, for the poly(N‐CBz‐Hpr‐co‐tetra‐MC) system, when the tetra‐MC content decreased from 80 to 8 mol %, the T_g increased from ?18 to 52 °C. The relationship between the poly(N‐CBz‐Hpr‐co‐tri‐MC) T_g and the compositions was in approximation with the Fox equation. In vitro degradation of these poly(N‐CBz‐Hpr‐co‐tri‐MC)s was evaluated from weight‐loss measurements. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1435–1443, 2003     

Towards the Synthesis of Azoacetylenes

The synthesis of azoacetylenes (=dialkynyldiazenes) 1 and 2 has been investigated. They represent a still elusive class of chromophores with potentially very interesting applications as novel bistable photochemical molecular switches or as antitumor agents (Fig. 1). Our synthetic efforts have led us alongside three different approaches (Scheme 1). In a first route, it was envisioned to generate the azo (=diazene) bond by photolysis of N,N′‐dialkynylated 1,3,4‐thiadiazolidine‐2,5‐diones that are themselves challenging targets (Scheme 2). Attempts are described to obtain the latter by alkynylation of the parent heterocycle with substituted alkynyliodonium salts. In a conceptually similar approach, the no‐less‐challenging dialkynylated 9,10‐dihydro‐9,10‐diazanoanthracene ( 29 ) was to be generated by alkynylation of the unsubstituted hydrazine 28 (Scheme 6). In a second route, the generation of the N?N bond from Br‐substituted divinylidenehydrazines (ketene‐azines) 35 was attempted in a synthetic scheme involving an aza‐Wittig reaction between azinobis(phosphorane) 36 and (triisopropylsilyl)ketene 37 (Scheme 7). Finally, a third approach, based on the formation of the central azo bond as the key step, was explored. This route involved the extrapolation of a newly discovered condensation reaction of N,N‐disilylated anilines with nitroso compounds (Scheme 11, and Tables 1 and 2) to the transformation of N,N‐disilylated ynamine 55 and nitroso‐alkyne 54 (Scheme 13).     

An Unconventional Polymerization Route to Hydrophilic Fluorescent Organic Nanoparticles for Multicolor Cellular Bioimaging

We demonstrated an unconventional polymerization route to synthesize hydrophilic fluorescent organic nanoparticles (FONs) for multicolor cellular bioimaging in this contribution. The route benefits from our unexpected discovery of a rapid polymerization reaction between 1,6‐hexanediol dipropiolate and 2,4,6‐triazide‐1,3,5‐triazine under the catalysis of N,N,N′,N′′,N′′‐pentamethyldiethylenetriamine (PMDETA). Interestingly, the 2,4,6‐triazide‐1,3,5‐triazine and PMDETA system can also induce rapid free radical polymerization at room temperature. The as‐prepared FONs exhibited promising water solubility and stability with an average diameter of 20 nm. The excitation wavelength‐dependent fluorescent properties endow the FONs with blue, yellow, and red fluorescent emission under UV, blue, and green excitation, respectively. The cytotoxicity of FONs was investigated by using a Cell Counting Kit (CCK‐8) assay, which indicated good biocompatiblity. More importantly, the cell uptake experiment verified the FONs were excellent fluorescent nanoprobes for multicolor cellular bioimaging. Therefore, this unconventional route provides a novel fabrication strategy of highly hydrophilic FONs for biomedical applications.     

Metal‐template synthesis of cyclic epoxide–amine oligomers: Uncrosslinked epoxide–amine addition polymers, 47

The addition reaction of 2,2‐bis‐[4‐(2,3‐epoxypropoxy)‐phenyl]‐propane (DGEBA) and preformed complexes of metal ions and disecondary diamines led to a large quantity of cyclic epoxide–amine oligomers. As shown by gel permeation chromatographic analysis, cycles of n = 1, 2, and 3 were formed. Functional epoxide end groups of the prepared oligomers were completely missing in the IR and ¹H NMR and ¹³C NMR spectra. In the fast atom bombardment and matrix‐assisted laser desorption/ionization mass spectra, the molecular ions of the n = 1, 2, 3 cycles of DGEBA and N,N′‐dibenzyl‐5‐oxanonanediamine‐1,9 were detected at m/z = 680, 1361, and 2042. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2047–2052, 2003     

Anionic ring‐opening polymerization of a five‐membered cyclic carbonate having a glucopyranoside structure

Anionic ring‐opening polymerizations of methyl 4,6‐O‐benzylidene‐2,3‐O‐carbonyl‐α‐D ‐glucopyranoside (MBCG) were investigated using various anionic polymerization initiators. Polymerizations of the cyclic carbonate readily proceeded by using highly active initiators such as n‐butyllithium, lithium tert‐butoxide, sodium tert‐butoxide, potassium tert‐butoxide, and 1,8‐diazabicyclo[5.4.0]undec‐7‐ene, whereas it did not proceed by using N,N‐dimethyl‐4‐aminopyridine and pyridine as initiators. In a polymerization of MBCG (1.0 M), 99% of MBCG was converted within 30 s to give the corresponding polymer with number‐averaged molecular weight (M_n) of 16,000. However, the M_n of the polymer decreased to 7500 when the polymerization time was prolonged to 24 h. It is because a backbiting reaction might occur under the polymerization conditions. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Preparation of crystalline polyamides by the alternating copolymerization of aziridines and cyclic imides

The copolymerization of aziridines and cyclic imides was studied. Aziridines copolymerized alternately with cyclic imides to give crystalline polyamides. Ethylenimine and succinimide copolymerized to nylon 2,4, melting near 300°C., without any catalyst. Similarly, the corresponding crystalline polyamides were obtained from the systems of 1,2-propylenimine–succinimide, ethylenimine–glutarimide, and ethylenimine–phthalimide. The copolymerization of aziridines and cyclic imides in the presence of BF₃OEt₂ gave a copolymer which was rich in aziridine units, whereas, the addition of triethylamine had no influence on the copolymer composition. A mechanism of copolymerization was proposed based on the facts that N-tetramethylenesuccinamide was obtained by the reaction of pyrrolidine and succinimide, N-acetylethylenimine reacted with acetamide to yield N,N′-diacetylethylenediamine and that the rate of this copolymerization was dependent on the electrophilicity of imide.     

Electrochemical Intramolecular Aminooxygenation of Unactivated Alkenes

An electrochemical approach to the intramolecular aminooxygenation of unactivated alkenes has been developed. This process is based on the addition of nitrogen‐centered radicals, generated through electrochemical oxidation, to alkenes followed by trapping of the cyclized radical intermediate with 2,2,6,6‐tetramethylpiperidine‐N‐oxyl radical (TEMPO). Difunctionalization of a variety of alkenes with easily available carbamates/amides and TEMPO affords aminooxygenation products in high yields and with excellent trans selectivity for cyclic systems (d.r. up to>20:1). The approach provides a much‐needed complementary route to existing cis‐selective methods.     

Synthesis of a model cyclic triblock terpolymer of styrene,isoprene, and methyl methacrylate

The synthesis of a model cyclic triblock terpolymer [cyclic(S‐b‐I‐b‐MMA] of styrene (S), isoprene (I), and methyl methacrylate (MMA) was achieved by the end‐to‐end intramolecular amidation reaction of the corresponding linear α,ω‐amino acid precursor [S‐b‐I‐b‐MMA] under high‐dilution conditions. The linear precursor was synthesized by the sequential anionic polymerization of S, I, and MMA with 2,2,5,5‐tetramethyl‐1‐(3‐lithiopropyl)‐1‐aza‐2,5‐disilacyclopentane as an initiator and amine generator and 4‐bromo‐1,1,1‐trimethoxybutane as a terminator and carboxylic acid generator. The separation of the unreacted linear polymer from the cyclic terpolymer was facilitated by the transformation of the unreacted species into high molecular weight polymers by the evaporation of the reaction solvent and the continuation of the reaction under high‐concentration conditions. The intermediate materials and the final cyclic terpolymer, characterized by size exclusion chromatography, vapor pressure osmometry, thin‐layer chromatography, IR and NMR spectroscopy, exhibited high molecular weight and compositional homogeneity. Dilute‐solution viscosity measurements were used as an additional proof of the cyclic structure. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1476–1483, 2002     

Purine 3′:5′‐cyclic nucleotides with the nucleobase in a syn orientation: cAMP,cGMP and cIMP

Purine 3′:5′‐cyclic nucleotides are very well known for their role as the secondary messengers in hormone action and cellular signal transduction. Nonetheless, their solid‐state conformational details still require investigation. Five crystals containing purine 3′:5′‐cyclic nucleotides have been obtained and structurally characterized, namely adenosine 3′:5′‐cyclic phosphate dihydrate, C₁₀H₁₂N₅O₆P·2H₂O or cAMP·2H₂O, (I), adenosine 3′:5′‐cyclic phosphate 0.3‐hydrate, C₁₀H₁₂N₅O₆P·0.3H₂O or cAMP·0.3H₂O, (II), guanosine 3′:5′‐cyclic phosphate pentahydrate, C₁₀H₁₂N₅O₇P·5H₂O or cGMP·5H₂O, (III), sodium guanosine 3′:5′‐cyclic phosphate tetrahydrate, Na⁺·C₁₀H₁₁N₅O₇P⁻·4H₂O or Na(cGMP)·4H₂O, (IV), and sodium inosine 3′:5′‐cyclic phosphate tetrahydrate, Na⁺·C₁₀H₁₀N₄O₇P⁻·4H₂O or Na(cIMP)·4H₂O, (V). Most of the cyclic nucleotide zwitterions/anions [two from four cAMP present in total in (I) and (II), cGMP in (III), cGMP⁻ in (IV) and cIMP⁻ in (V)] are syn conformers about the N‐glycosidic bond, and this nucleobase arrangement is accompanied by C_rib—H…N_pur hydrogen bonds (rib = ribose and pur = purine). The base orientation is tuned by the ribose pucker. An analysis of data obtained from the Cambridge Structural Database made in the context of syn–anti conformational preferences has revealed that among the syn conformers of various purine nucleotides, cyclic nucleotides and dinucleotides predominate significantly. The interactions stabilizing the syn conformation have been indicated. The inter‐nucleotide contacts in (I)–(V) have been systematized in terms of the chemical groups involved. All five structures display three‐dimensional hydrogen‐bonded networks.     

New reactions of N‐T‐butyl‐N‐benzoylhydrazine with triphosgene

N‐tert‐Butyl‐N‐benzoylhydrazine was prepared in a new and convenient procedure with good yield. Triphosgene underwent reaction with three equivalents of N‐t‐butyl‐N‐benzoylhydrazine using six equivalents of triethylamine as a base to yield the cyclic tetramer of N‐t‐butyl‐N‐isocyanatobenzoylamide. Treatment of triphosgene with three equivalents of N‐t‐butyl‐N‐benzoylhydrazine either in the presence of three equivalents of triethylamine or in the absence of triethylamine afforded the cyclic pentamer of iso‐cyanate, from which tert‐butyl is eliminated.     

BINOL Phosphoric Acid‐Catalyzed Asymmetric Mannich Reaction of Cyclic N‐Acyl Ketimines with Cyclic Enones

A highly enantio‐ and diastereoselective Mannich reaction of cyclic N‐acyl ketimines generated in situ from 3‐hydroxyisoindolin‐1‐ones with cyclic enones has been accomplished using a chiral phosphoric acid catalyst to afford the chiral isoindalinone derivatives in high yields with excellent enantioselectivities (upto 97 % ee). This is the first report on the synthesis of chiral isoindolin‐1‐ones bearing adjacent quaternary and tertiary stereogenic centers.     

Screening of N,N‐bidentate and N,N,N‐tridentate pyridine‐based ligands in the catalytic allylic oxidation of cyclic olefins

A variety of chiral N,N‐bidentate and N,N,N‐tridentate ligands based on the pyridine framework, namely C2‐symmetric dipyridylmethane and terpyridine, N‐(p‐toluensulfinyl)iminopyridines and two kinds of iminopyridines, has been assessed in the asymmetric copper(I)‐catalysed allylic oxidation of cyclic olefins. Catalytic activity and enantioselectivity were found to be highly dependent upon the framework of the ligands, which afforded cycloalkenyl benzoates in low to moderate yields and enantioselectivities. The best yields (up to 70%) and enantioselectivities (up to 53% enantiomeric excess) were obtained with an iminopyridine based on camphane and quinoline skeletons. Copyright © 2014 John Wiley & Sons, Ltd.     

(<Emphasis Type="Italic">N</Emphasis>-trifluoromethanesulfonyl)sulfimides of linear and cyclic organosilicon sulfides

The reaction of sodium salt of N-(chloro)trifluoromethanesulfonamide with linear and cyclic fiveand six-membered organosilicon sulfides was studied and their first N-trifluoromethanesulfonyl-substituted imides were synthesized. The results are compared with the data on the reaction of the same substrates with chloramine B. The distinctly pronounced stabilizing effect of a highly electronegative trifluoromethanesulfonyl group was observed, which decreased the reactivity of N-trifyl-substituted sulfimides with respect to electrophilic reagents and increased their stability. Mass spectra of isomeric cyclic organosilicon N-trifluoromethanesulfonyl-substituted sulfimides VII, X, their acyclic analog III, and the product of the decomposition of the latter at the Si-C(S) bond IV were studied. The mechanism of formation of sulfimides in nonaqueous media is discussed.