Diels–Alder reaction of 2,7‐dichloroquinoline‐5,8‐dione with a thiazole o‐quinodimethane. Assignment of the regiochemistry by 1H–13C HMBC correlations

The Diels–Alder reaction between a thiazole o‐quinodimethane and 4,6‐dichloroquinoline‐5,8‐dione gave 6‐chloro‐9‐azaanthra[2,3‐b]thiazole‐5,10‐dione as a single regioisomer. Its structure was assigned by 2D ¹H–¹³C HMBC short‐ and long‐range correlations. Measuring the spectra in CF₃CO₂D indicated that both nitrogen atoms of pyridine and thiazole rings are deuterated. Copyright © 2001 John Wiley & Sons, Ltd.     

Microwave‐assisted three‐component synthesis and in vitro antifungal evaluation of 6‐cyano‐5,8‐dihydropyrido[2,3‐d]pyrimidin‐4(3H)‐ones

The reaction of 6‐aminopyrimidin‐4‐ones 1 with benzaldehydes 2 and β‐aminocrotononitrile 3 or benzoylacetonitrile 4 under microwave irradiation in dry media yields the 6‐cyano‐5,8‐dihydropyrido[2,3‐d]‐pyrimidinones 5a‐t . The structure of the synthesized compounds was determined on the basis of nmr measurements, especially by ¹H,¹H?, ¹H,¹³C COSY, DEPT and NOESY experiments. In contrast with other pyrido‐[2,3‐d]pyrimidine derivatives, these compounds did not show any antifungal in vitro activity up to 250 μg/mL.     

A new entry to pyrazolo[4,3‐e][1,4]diazepines. Facile synthesis of pyrazolo [4,3‐e][1,4]diazepin‐5,8‐diones, 5,6,8‐triones and pyrazolo[4,3‐e]pyrrolo‐[1,2‐a][1,4]diazepin‐5,10‐diones

A facile approach to pyrazolo[4,3‐e][1,4]diazepin‐5,8‐diones and pyrazolo[4,3‐e]pyrrolo[1,2‐a][1,4]‐diazepin‐5,10‐diones is reported. Strategy involved the utility of α‐amino acid as a three‐atom segment in the construction of diazepine skeleton on the preformed pyrazole ring.     

Green Microwave‐assisted Multicomponent Route to the Formation of 5,8‐Dihydropyrido[2,3‐d]pyrimidine Skeleton in Aqueous Media

Three‐component synthesis of 5‐substituted 6‐acetyl‐2‐amino‐7‐methyl‐5,8‐dihydropyrido[2,3‐d ]pyrimidines was brought to facile energy‐efficient and environmental‐friendly conditions using multicomponent reaction, microwave field as an activation method and hot water as a solvent. A series of the target compounds was synthesized using the developed procedure.     

Synthesis and polymerization of fluorinated monomers bearing a reactive lateral group. XIV. Radical copolymerization of vinylidene fluoride with methyl 1,1‐dihydro‐4,7‐dioxaperfluoro‐5,8‐dimethyl non‐1‐enoate

The radical copolymerization in solution of vinylidene fluoride (VDF; or 1,1‐difluoroethylene) with methyl 1,1‐dihydro‐4,7‐dioxaperfluoro‐5,8‐dimethyl non‐1‐enoate (MDP) initiated by di‐tert‐butyl peroxide is presented. Six copolymerization reactions were investigated with initial [VDF]₀/[MDP]₀ molar ratios of 35/65 to 80/20. Both of these comonomers copolymerized in this range of copolymerization. Moreover, these comonomers homopolymerized separately under these conditions. The copolymer compositions of these random copolymers were calculated by means of ¹⁹F NMR spectroscopy, which allowed the quantification of the respective amounts of each monomeric unit in the copolymers. The Tidwell–Mortimer method was used for the assessment of the reactivity ratios (r_i) of both comonomers, which showed a higher incorporation of MDP in the copolymers (r_MDP = 2.41 ± 2.28 and r_VDF = 0.38 ± 0.21 at 120 °C). The Alfrey–Price Q and e values of the trifluoroallyl monomer MDP were calculated to be 0.024 (from Q_VDF = 0.008) or 0.046 (from Q_VDF = 0.015) and 0.70 (vs e_VDF = 0.40) or 0.80 (vs e_VDF = 0.50), respectively, indicating that MDP was an electron‐accepting monomer. The thermal properties of these fluorinated copolymers were also determined. Except for those containing a high amount of VDF, the copolymers were amorphous. Each showed one glass‐transition temperature (T_g) only, and with known laws of T_g's, T_g of the MDP homopolymer was assessed. It was compared to that obtained from the direct radical homopolymerization of MDP and discussed. Indeed, these two values were close (T_g = ?3 °C). Thermogravimetric analyses were performed, and they showed that the copolymers were rather thermostable because the thermal degradation occurred at 280 °C. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3109–3121, 2003     

An efficient one‐pot synthesis of 5‐aryl substituted 2‐amino‐5,8‐dihydropyrido[2,3‐D] pyrimidin‐4,7‐diones under microwave irradiationl without catalyst

A series of 5‐aryl substituted 2‐amino‐5,8‐dihydropyrido[2,3‐d]pyrimidin‐4,7‐diones were synthesized through one‐pot condensation of 2,6‐diaminopyrimidin‐4‐one, aldehyde and Meldrum's acid using glycol as energy transfer agent under microwave irradiation without catalyst. The one‐pot protocol in the absence of catalyst has the advantage of good yield (86‐95%), short route and reaction time (3‐6 min) and environmentally friendly.     

Alpha vinylation of haloquinoline‐5,8‐diones with methyl acrylate and methyl vinyl ketone under baylis‐hillman reaction conditions

A synthesis of mono‐ and di‐vinylquinolinediones based on substitution of the halogens in 6,7‐dihaloquinoline‐5,8‐diones by DABCO‐assisted enolate ion is described. Divinylquinolines undergo 6π‐electrocyclization by thermally to give the benzo[g]quinoline derivatives.     

Bipyridinophane‐containing conjugated polymers modulated with an intramolecular aromatic C?H/π interaction

Bipyridinophane–fluorene conjugated copolymers have been synthesized via Suzuki and Heck coupling reactions from 5,8‐dibromo‐2,11‐dithia[3]paracyclo[3](4,4′)‐2,2′‐bipyridinophane and suitable fluorene precursors. Poly[2,7‐(9,9‐dihexylfluorene)‐co‐alt‐5,8‐(2,11‐dithia[3]paracyclo[3](4,4′)‐2,2′‐bipyridinophane)] ( P7 ) exhibits large absorption and emission redshifts of 20 and 34 nm, respectively, with respect to its planar reference polymer Poly[2,7‐(9,9‐dihexylfluorene)‐co‐alt‐1,4‐(2,5‐dimethylbenzene)] ( P11 ), which bears the same polymer backbone as P7 . These spectral shifts originate from intramolecular aromatic C? H/π interactions, which are evidenced by ultraviolet–visible and ¹H NMR spectra as well as X‐ray single‐crystal structural analysis. However, the effect of the intramolecular aromatic C? H/π interactions on the spectral shift in poly[9,9‐dihexylfluorene‐2,7‐yleneethynylene‐co‐alt‐5,8‐(2,11‐dithia[3]paracyclo[3](4,4′)‐2,2′‐bipyridinophane)] ( P10 ) is much weaker. Most interestingly, the quenching behaviors of these two conjugated polymers are largely dependent on the polymer backbone. For example, the fluorescence of P7 is efficiently quenched by Cu²⁺, Co²⁺, Ni²⁺, Zn²⁺, Mn²⁺, and Ag⁺ ions. In contrast, only Cu²⁺, Co²⁺, and Ni²⁺ ions can partially quench the fluorescence of P10 , but much less efficiently than the fluorescence of P7 . The static Stern–Volmer quenching constants of Cu²⁺, Co²⁺, and Ni²⁺ ions toward P7 are of the order of 10⁶ M^?1, being 1300, 2500, and 37,300 times larger than those of P10 , respectively. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4154–4164, 2006     

Carbon‐13 Nuclear Magnetic Resonance Spectroscopic Analyses of 3‐Aryl‐3‐hydroxyl‐2,2,4,4‐tetramethylcyclobutanones and Related Compounds

A series of 2‐aryl‐2‐hydroxy‐1,1,3,3‐tetramethyl‐5,8‐dioxaspiro[3.4]octanes ( 1 ), 3‐aryl‐3‐hydyoxyl‐2,2,4,4‐tetyramethylcyclobutanones ( 2 ), and l‐aryl‐2,2,4‐trimethyl‐1,3‐pentadiones ( 3 ) were studied using ¹³C NMR analyses. The chemical shifts of C‐c are dependent on the substituent groups on the phenyl ring for compounds 1 (ρ =‐0.966, R² = 0.987) and 2 (ρ = ?1.378, R² = 0.998). The chemical shifts of C‐a follow a similar trend (ρ =?0.926, R² = 0.989). In the case of compounds 3 , C‐c yielded the opposite trend with very poor correlation coefficiency (ρ = 1.22, R² = 0.179). This result reveals the field effect of a polar bond and resonance‐induced changes in pi electron‐density at C‐1 on the cyclobutanering series.     

Structural elucidation of dioxa‐cage compounds from tetrahydroisobenzofuran‐1(3H)‐one: analysis of NMR data and GIAO chemical shifts calculations

The polycyclic compounds, especially the dioxa‐cages, have attracted considerable attention in recent years. In our work, a series of 9β‐substituted 3‐oxo‐4,11‐dioxatetracyclo[5.2.1.1^5,8.0^2,6]undecane compounds were unexpectedly isolated during bromination, chlorination and epoxidation reactions of the 3‐hydroxy‐3a,4,7,7a‐tetrahydro‐4,7‐methanoisobenzofuran‐1(3H)‐one. After careful analysis of the NMR data, the chemical shifts of the isolated and the expected products were predicted by theoretical calculations using density functional theory and gauge including atomic orbitals. The best correlation between calculated and experimental data was evaluated by comparing mean absolute errors and applying DP4 probability methodology. Results from both approaches indicated a correct structural elucidation. Copyright © 2016 John Wiley & Sons, Ltd.     

cis‐Di­chloro(5,8‐dioxa‐2,11‐dithia[12]‐o‐cyclo­phane)­palladium(II)

The preparation and crystal structure of the title compound, cis‐di­chloro­[6,9‐dioxa‐3,12‐di­thia­bi­cyclo­[12.4.0]­octadeca‐14,‐16,­18(1)‐tri­ene‐S,S′]­palladium(II), [PdCl₂(C₁₄H₂₀O₂S₂)], are described. The Pd atom has a square‐planar environment, coordinated to two S atoms of the di­thia­dioxa macrocycle and to two Cl^? ions. The non‐coordinating O atoms are oriented away from the metal coordination plane. Upon complexation, a bicyclic chelate structure, which consists of a seven‐ and an eleven‐membered ring, is formed.     

New domino‐reaction for the synthesis of N4‐(5‐aryl‐1,3‐oxathiol‐2‐yliden)‐2‐phenylquinazolin‐4‐amines and 4‐[4‐aryl‐5‐(2‐phenylquinazolin‐4‐yl)‐1,3‐thiazol‐2‐yl]morpholine

The model morpholine‐1‐carbothioic acid (2‐phenyl‐3H‐quinazolin‐4‐ylidene) amide (1) reacts with phenacyl bromides to afford N⁴‐(5‐aryl‐1,3‐oxathiol‐2‐yliden)‐2‐phenylquinazolin‐4‐amines (4) or N⁴‐(4,5‐diphenyl‐1,3‐oxathiol‐2‐yliden)‐2‐phenyl‐4‐aminoquinazoline ( 5 ) by a thermodynamically controlled reversible reaction favoring the enolate intermediate, while the 4‐[4‐aryl‐5‐(2‐phenylquinazolin‐4‐yl)‐1,3‐thiazol‐2‐yl]morpholine ( 8 ) was produced by a kinetically controlled reaction favoring the C‐anion intermediate. ¹H nmr, ¹³C nmr, ir, mass spectroscopy and x‐ray identified compounds ( 4 ), ( 5 ) and ( 8 ).     

2,3‐bis(5‐Hexylthiophen‐2‐yl)‐6,7‐bis(octyloxy)‐5,8‐di(thiophen‐2‐yl) quinoxaline: A good construction block with adjustable role in the donor‐π‐acceptor system for bulk‐heterojunction solar cells

Three 2,3‐bis(5‐hexylthiophen‐2‐yl)‐6,7‐bis(octyloxy)‐5,8‐di(thiophen‐2‐yl)‐quinoxaline ( BTTQ )‐based conjugated polymers, namely, PF‐BTTQ ( P1 ), PP‐BTTQ ( P2 ), and PDCP‐BTTQ ( P3 ), were successfully synthesized for efficient polymer solar cells (PSCs) with electron‐rich units of fluorene and dialkoxybenzene and electron‐deficient unit dicyanobenzene, respectively. All the polymers exhibited good solubility in common organic solvents and good thermal stability. Their deep‐lying HOMO energy levels enabled them good stability in the air and the relatively low HOMO energy level assured a higher open circuit potential when used in PSCs. Bulk‐heterojunction solar cells were fabricated using these copolymers blended with a fullerene derivative as an acceptor. All of them exhibited promising performance, and the best device performance with power conversion efficiency up to 3.30% was achieved under one sun of AM 1.5 solar simulator illumination (100 mW/cm²). © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Two conformers of 10,11‐dihydro‐5H‐dibenzo[a,d]cyclo­heptene spiro‐linked with homobenzoquinone epoxide

The crystal structures of the two thermally equilibrated conformational isomers of the epoxide 1′,5′‐dimethyl­spiro[10,11‐dihydro‐5H‐dibenzo[a,d]cyclo­heptene‐5,8′‐4′‐oxatricyclo[5.1.0.0^3,5]octane]‐2′,6′‐dione, C₂₃H₂₀O₃, have been determined by X‐ray diffraction. In the tricyclic dione skeleton, the oxirane and cyclo­propane rings adopt an anti structure with respect to the conjunct quinone frame. The spiro‐linked 10,11‐dihydro‐5H‐dibenzo[a,d]cyclo­heptene ring of the major isomer has a fairly twisted boat form, folding opposite to the adjoining cyclo­propane methyl substituent, whereas the seven‐membered ring of the minor isomer has an almost ideal twist–boat form, inversely folding to the side of the relevant methyl group. The conformational structures of these isomers have been compared with those of the corresponding isomers of the unepoxidized homobenzoquinone.     

Synthesis of 15‐Cyano‐12‐oxopentadecano‐15‐lactone and 15‐Cyano‐ 12‐oxopentadecano‐15‐lactam

15‐Cyano‐12‐oxopentadecano‐15‐lactone was synthesized in 59% total yield starting from 2‐nitrocyclododecanone by Michael addition to acrylaldehyde, followed by reaction with trimethylsilylcyanide, hydrolysis, ring‐expansion, and Nef reaction. A two‐step, one‐pot synthesis of intermediate 2‐hydroxy‐4‐(1‐nitro‐2‐oxycyclododecyl)butanenitrile from 3‐(1‐nitro‐2‐oxocyclododecyl)propanal was developed and the conditions for the Nef reaction were studied. 15‐Cyano‐12‐oxopentadecano‐15‐lactam was synthesized in 40% total yield starting from 2‐nitrocyclododecanone by Michael addition to acrylaldehyde, followed by Strecker reaction, ring‐expansion, and Nef reaction. The conditions for the Strecker and Nef reactions were studied. The structures of the target compounds, intermediates, and by‐product were characterized by IR, ¹H‐ and ¹³C‐NMR, and elemental analysis or MS.     

Photochemistry of 1‐Cyclopropyl‐6‐fluoro‐1,4‐dihydro‐4‐oxo‐7‐ (piperazin‐1‐yl)quinoline‐3‐carboxylic Acid (=Ciprofloxacin) in Aqueous Solutions

The 1‐cyclopropyl‐6‐fluoro‐1,4‐dihydro‐4‐oxo‐7‐(piperazin‐1‐yl)quinoline‐3‐carboxylic acid (=ciprofloxacin; 1 ) undergoes low‐efficiency (Φ=0.07) substitution of the 6‐fluoro by an OH group on irradiation in H₂O via the ππ* triplet (detected by flash photolysis, λ_max 610 nm, τ 1.5 μs). Decarboxylation is a minor process (≤5%). The addition of sodium sulfite or phosphate changes the course of the reaction under neutral conditions. Reductive defluorination is the main process in the first case, while defluorination is accompanied by degradation of the piperazine moiety in the presence of phosphate. In both cases, the initial step is electron‐transfer quenching of the triplet (k_q=2.3⋅10⁸M ⁻¹ s⁻¹ and 2.2⋅10⁷M ⁻¹ s⁻¹, respectively). Oxoquinoline derivative 1 is much more photostable under acidic conditions, and in this case the F‐atom is conserved, and the piperazine group is stepwise degraded (Φ=0.001).     

Synthesis of some new 1‐acyl‐5‐aryl‐3‐(5‐methyl‐1‐p‐tolyl‐1H‐1,2,3‐triazol‐4‐yl)‐4,5‐dihydro‐1H‐pyrazole

Some new compounds (E)‐3‐aryl‐1‐(5‐methyl‐1‐p‐tolyl‐1H‐1,2,3‐triazol‐4‐yl)‐prop‐2‐en‐1‐ones 5a–e were prepared by 1‐(5‐methyl‐1‐p‐tolyl‐1H‐1,2,3‐triazol‐4‐yl)‐ethanone and various aromatic aldehydes. Then one pot reaction was happened by compounds 5a–e with hydrazine hydrate in acetic acid or propionic acid, respectively, to give the title compounds 1acyl‐5‐aryl‐3‐(5‐methyl‐1‐p‐tolyl‐1H‐1,2,3‐triazol‐4‐yl)‐4,5‐dihydro‐1H‐pyrazoles 6a–i . All structures were established by MS, IR, CHN, ¹H‐NMR and ¹³C‐NMR spectral data. J. Heterocyclic Chem., (2012).     

立体选择性合成2-(a-噻吩甲酰基)-3-取代苯基-4-乙氧羰基-5-甲基-反式-2,3-二氢呋喃

溴化(a-噻吩甲酰基)甲基三苯鉮1与3-取代苯甲叉基-2,4-戊二酮 2以碳酸钾为碱,在苯中55℃条件下反应,可以较好的收率、高立体选择性地生成反-2-(a-噻吩甲酰基)-3-取代苯基-4-乙氧羰基-5-甲基-2,3-二氢呋喃3。产物结构均经波谱予以确定。本文还提出了生成产物的可能机理。     

A two‐dimensional cadmium(II) coordination polymer constructed from 4‐carboxy‐1‐(4‐carboxylatobenzyl)‐2‐propyl‐1H‐imidazole‐5‐carboxylate and 1‐(4‐carboxylatobenzyl)‐2‐propyl‐1H‐imidazole‐4‐carboxylate ligands

Crystals of poly[[aqua[μ₃‐4‐carboxy‐1‐(4‐carboxylatobenzyl)‐2‐propyl‐1H‐imidazole‐5‐carboxylato‐κ⁵O¹O^1′:N³,O⁴:O⁵][μ₄‐1‐(4‐carboxylatobenzyl)‐2‐propyl‐1H‐imidazole‐4‐carboxylato‐κ⁷N³,O⁴:O⁴,O^4′:O¹,O^1′:O¹]cadmium(II)] monohydrate], {[Cd₂(C₁₅H₁₄N₂O₄)(C₁₆H₁₄N₂O₆)(H₂O)]·H₂O}_n or {[Cd₂(Hcpimda)(cpima)(H₂O)]·H₂O}_n, (I), were obtained from 1‐(4‐carboxybenzyl)‐2‐propyl‐1H‐imidazole‐4,5‐dicarboxylic acid (H₃cpimda) and cadmium(II) chloride under hydrothermal conditions. The structure indicates that in‐situ decarboxylation of H₃cpimda occurred during the synthesis process. The asymmetric unit consists of two Cd²⁺ centres, one 4‐carboxy‐1‐(4‐carboxylatobenzyl)‐2‐propyl‐1H‐imidazole‐5‐carboxylate (Hcpimda²⁻) anion, one 1‐(4‐carboxylatobenzyl)‐2‐propyl‐1H‐imidazole‐4‐carboxylate (cpima²⁻) anion, one coordinated water molecule and one lattice water molecule. One Cd²⁺ centre, i.e. Cd1, is hexacoordinated and displays a slightly distorted octahedral CdN₂O₄ geometry. The other Cd centre, i.e. Cd2, is coordinated by seven O atoms originating from one Hcpimda²⁻ ligand and three cpima²⁻ ligands. This Cd²⁺ centre can be described as having a distorted capped octahedral coordination geometry. Two carboxylate groups of the benzoate moieties of two cpima²⁻ ligands bridge between Cd2 centres to generate [Cd₂O₂] units, which are further linked by two cpima²⁻ ligands to produce one‐dimensional (1D) infinite chains based around large 26‐membered rings. Meanwhile, adjacent Cd1 centres are linked by Hcpimda²⁻ ligands to generate 1D zigzag chains. The two types of chains are linked through a μ₂‐η² bidentate bridging mode from an O atom of an imidazole carboxylate unit of cpima²⁻ to give a two‐dimensional (2D) coordination polymer. The simplified 2D net structure can be described as a 3,6‐coordinated net which has a (4³)₂(4⁶.6⁶.8³) topology. Furthermore, the FT–IR spectroscopic properties, photoluminescence properties, powder X‐ray diffraction (PXRD) pattern and thermogravimetric behaviour of the polymer have been investigated.     

7‐Iodo‐8‐aza‐7‐deaza‐2′‐deoxy­adenosine and 7‐bromo‐8‐aza‐7‐deaza‐2′‐deoxyadenosine

The isomorphous structures of the title molecules, 4‐amino‐1‐(2‐deoxy‐β‐d ‐erythro‐pento­furan­osyl)‐3‐iodo‐1H‐pyrazolo‐[3,4‐d]pyrimidine, (I), C₁₀H₁₂IN₅O₃, and 4‐amino‐3‐bromo‐1‐(2‐deoxy‐β‐d ‐erythro‐pento­furan­osyl)‐1H‐pyrazolo[3,4‐d]­pyrimidine, (II), C₁₀H₁₂BrN₅O₃, have been determined. The sugar puckering of both compounds is C1′‐endo (^1′E). The N‐­glycosidic bond torsion angle χ¹ is in the high‐anti range [?73.2 (4)° for (I) and ?74.1 (4)° for (II)] and the crystal structure is stabilized by hydrogen bonds.